Respected Friends,
It's my pleasure to get in touch with you. This email is about security and
future safety of your family, your child, your wife, your friends and
relatives. It has become very necessary to take action now and get united else
there will be no one behind you to take care of
Anatolij Gustschin wrote:
Please note that comments to the patch should go below ---
line so that they do not appear in the commit message, e.g.
in this case:
This patch will
* FIX: bus_vcxk.c:383: warning: unused variable 'lineptr'
Your SOB
---
Here is the place for comments which
-Original Message-
From: Heiko Schocher [mailto:h...@denx.de]
Sent: Tuesday, July 28, 2009 11:14 AM
To: Prafulla Wadaskar
Cc: U-Boot user list
Subject: arm: mtest crashs for CONFIG_KW88F6281 boards
Hello Prafulla,
it seems to me, that for all actual CONFIG_KW88F6281 boards,
Hello Heiko,
Heiko Schocher wrote:
Hello Alessandro,
Alessandro Rubini wrote:
This adds gpio and i2c support for the Nomadik evaluation kit. They
are needed to turn on the LCD backlight in order to later add LCD
support.
I have one doubt and some questions on gpio:
To use soft_i2c I
Hello Heiko,
Heiko Schocher wrote:
Signed-off-by: Heiko Schocher h...@denx.de
---
- changes since v1:
added comments from Prafulla Wadaskar
- changes since v2
added comments from Jean-Christophe
- added speed setting
drivers/i2c/Makefile |1 +
Hello Jean-Christophe, Tom,
Jean-Christophe PLAGNIOL-VILLARD schrieb:
On 10:16 Mon 27 Jul , Heiko Schocher wrote:
Hello Jean-Christophe,
Jean-Christophe PLAGNIOL-VILLARD wrote:
On 18:21 Thu 23 Jul , Dirk Behme wrote:
Wolfgang Denk wrote:
Dear Jean-Christophe PLAGNIOL-VILLARD,
Hello Wolfgang,
The following changes since commit 94978e19f31d225b4f7d97c4acbac1ecfaeb8f69:
Wolfgang Denk (1):
Prepare 2009.08-rc1 (again, after fixing last minute issues).
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Heiko Schocher (2):
From: Luigi 'Comio' Mantellini luigi.mantell...@idf-hit.com
Signed-off-by: Luigi 'Comio' Mantellini luigi.mantell...@idf-hit.com
---
lib_generic/lzma/LzmaDec.c |2 +-
lib_generic/lzma/LzmaTools.c |1 -
lib_generic/lzma/Makefile|2 +-
3 files changed, 2 insertions(+), 3
Hello Jean-Christophe,
Jean-Christophe PLAGNIOL-VILLARD wrote:
}
diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h
index 3e2e09f..8a83d92 100644
--- a/include/configs/nhk8815.h
+++ b/include/configs/nhk8815.h
@@ -93,7 +93,7 @@
#define CONFIG_SYS_GBL_DATA_SIZE128
On 09:51 Tue 28 Jul , Heiko Schocher wrote:
Hello Jean-Christophe,
Jean-Christophe PLAGNIOL-VILLARD wrote:
}
diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h
index 3e2e09f..8a83d92 100644
--- a/include/configs/nhk8815.h
+++ b/include/configs/nhk8815.h
@@
I tried your patch on AT91SAM9263EK based OTC-570 board (patch will come to ML
within next merge window). It worked fine on it.
But some boards (the OTC-570 too) need a i2c_soft_init() function. So I
extended
your patch as follows:
[PATCH] i2c, soft: added soft_i2c.h
In case you must
it will better to define a couple of generic function where we implement it
as this
i2c_sda()
i2c_scl()
i2c_read()
i2c_activate()
i2c_tristate()
i2c_delay()
i2c_get_bus_num()
i2c_set_bus_num()
i2c_get_bus_speed()
i2c_set_bus_speed()
i2c_init()
I posted such a
On 11:27 Fri 24 Jul , Alessandro Rubini wrote:
From: Alessandro Rubini rub...@unipv.it
Signed-off-by: Alessandro Rubini rub...@unipv.it
Acked-by: Andrea Gallo andrea.ga...@stericsson.com
---
cpu/arm926ejs/nomadik/Makefile |2 +-
cpu/arm926ejs/nomadik/gpio.c| 99
Hello Jean-Christophe,
Jean-Christophe PLAGNIOL-VILLARD wrote:
it will better to define a couple of generic function where we implement it
as this
i2c_sda()
i2c_scl()
i2c_read()
i2c_activate()
i2c_tristate()
i2c_delay()
i2c_get_bus_num()
i2c_set_bus_num()
i2c_get_bus_speed()
Hello Alessandro,
Alessandro Rubini wrote:
From: Alessandro Rubini rub...@unipv.it
Signed-off-by: Alessandro Rubini rub...@unipv.it
Acked-by: Andrea Gallo andrea.ga...@stericsson.com
---
cpu/arm926ejs/nomadik/Makefile |2 +-
cpu/arm926ejs/nomadik/gpio.c| 99
Hello Alessandro
Alessandro Rubini wrote:
From: Alessandro Rubini rub...@unipv.it
Signed-off-by: Alessandro Rubini rub...@unipv.it
Acked-by: Andrea Gallo andrea.ga...@stericsson.com
---
board/st/nhk8815/nhk8815.c | 16 ++--
include/configs/nhk8815.h | 18
Hello Wolfgang,
The following changes since commit 94978e19f31d225b4f7d97c4acbac1ecfaeb8f69:
Wolfgang Denk (1):
Prepare 2009.08-rc1 (again, after fixing last minute issues).
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Alessandro Rubini (2):
Dear Heiko,
in message 4a6ed200.3070...@denx.de you wrote:
OK, thanks, but this patch was just a fast thought, and
as I wrote, I think, Wolfgang will not Ack this patch ...
Wolfgang?
Correct. If we are going to rework the Soft-I2C implementation, this
should be done for all boards (which is
When updating the reg in the /localbus/fl...@f000,0 node
size was wrong updated for the first flash, because the total
size was filled in, instead of the right size for it.
Signed-off-by: Heiko Schocher h...@denx.de
---
board/keymile/kmeter1/kmeter1.c |1 +
1 files changed, 1
Hello Wolfgang,
Wolfgang Denk wrote:
in message 4a6ed200.3070...@denx.de you wrote:
OK, thanks, but this patch was just a fast thought, and
as I wrote, I think, Wolfgang will not Ack this patch ...
Wolfgang?
Correct. If we are going to rework the Soft-I2C implementation, this
should be
List command always return EXIT_SUCCESS even in case of
failure by any means.
This patch return 0 if list command is sucessful,
returns negative value reported by check_header functions
Signed-off-by: Prafulla Wadaskar prafu...@marvell.com
---
tools/mkimage.c | 27 +--
Currently it is used by image.c only
This API can be used by additional mkimage types supports
for ex. kwbimage, to use it the API is made global
Signed-off-by: Prafulla Wadaskar prafu...@marvell.com
---
common/image.c |3 +--
include/image.h |1 +
2 files changed, 2 insertions(+), 2
This is Third step towards cleaning mkimage code for kwbimage
support in clean way. In this patch-
1. callback functions are used in mkimage.c those are defined
in defaut_image.c for currently supported images.
2. scan loop implemented for image header verify and print
1. get_table_entry_id API made global
2. get_table_entry_name API made global
3. typedef table_entry_t moved to image.h
Currently it is used by image.c only
These APIs can be used by additional mkimage types supports
for ex. kwbimage, to use it the API is made global
Signed-off-by: Prafulla
This is second step towards cleaning mkimage code for kwbimage
support in clean way. In this patch-
1. The image_get_header_size function call is replaced by sizeof(image_header_t)
in default_image.c
2. image header code moved form mkimage.c to default_image .c
Signed-off-by: Prafulla Wadaskar
This is first step towards cleaning mkimage code for kwbimage
support in clean way. Current mkimage code is very specific to
uimge generation whereas the same framework can be used to
generate other image types like kwbimage.
For this, the architecture of mkimage code need to modified.
Here is
This is Third step towards cleaning mkimage code for kwbimage
support in clean way.
This patch adds type kwbimabe support for mkimage
For more details refer docs/README.kwbimage
This patch is tested with Wheevaplub board
Signed-off-by: Prafulla Wadaskar prafu...@marvell.com
---
Makefile
Signed-off-by: Prafulla Wadaskar prafu...@marvell.com
---
Change log:
v2: updated as per review feedback for v1
v3: some white spaces removed
v4: tuned as per new kwbimage parsing (DATA command added for register setup)
board/Marvell/sheevaplug/config.mk|3 +
Dear Heiko Schocher,
In message 4a6ef6e4.2060...@denx.de you wrote:
Correct. If we are going to rework the Soft-I2C implementation, this
should be done for all boards (which is a pretty big action), and
probably should be done as part of the i2c: rework multibus/multi-
adapter
Hello Wolfgang,
Wolfgang Denk wrote:
In message 4a6ef6e4.2060...@denx.de you wrote:
Correct. If we are going to rework the Soft-I2C implementation, this
should be done for all boards (which is a pretty big action), and
probably should be done as part of the i2c: rework multibus/multi-
On 07:58 Tue 28 Jul , Kyungmin Park wrote:
On Tue, Jul 28, 2009 at 5:09 AM, Jean-Christophe
PLAGNIOL-VILLARDplagn...@jcrosoft.com wrote:
On 14:28 Fri 24 Jul , Kyungmin Park wrote:
On Fri, Jul 24, 2009 at 7:42 AM, Jean-Christophe
PLAGNIOL-VILLARDplagn...@jcrosoft.com wrote:
On
When CONFIG_NET_MULTI is defined, the NetLoop code looks in
eth_get_device()-enetaddr for the MAC address. However, this value may
not be set. In fact, it will not be if ethaddr was not present in the
environment when uboot was started. Therefore, even with 'setenv ethaddr
xx:xx:xx:xx:xx:xx', eg.
Hello all,
I've been working on writing a User's Manual generation tool, and before
I get too far I'd like to see if this is something the U-Boot community
would be interested in.
The thought was that everyone needs to develop User's Manuals for their
customers, and there's no reason for us
Add support to a small subset of commands, environment
variables, and POSTs. These are meant to show the
syntax and capabilities of the uboot-doc parser.
Signed-off-by: John Schmoller jschmol...@xes-inc.com
---
common/cmd_i2c.c| 71 ++-
Add uboot-doc support to the XPedite5370. Incorporates
templates to override the defaults and includes memory
maps.
Signed-off-by: John Schmoller jschmol...@xes-inc.com
---
board/xes/xpedite5370/manual/book_info.tmpl| 52 ++
board/xes/xpedite5370/manual/booting_linux.tmpl| 179
Dear John Schmoller,
In message cover.1248798202.git.jschmol...@xes-inc.com you wrote:
I've been working on writing a User's Manual generation tool, and before
I get too far I'd like to see if this is something the U-Boot community
would be interested in.
Anything wrong with the User's
Dear John Schmoller,
In message
310e8398479f23a6bfaceccf6cc86631b7bff4dc.1248798202.git.jschmol...@xes-inc.com
you wrote:
Add support to a small subset of commands, environment
variables, and POSTs. These are meant to show the
syntax and capabilities of the uboot-doc parser.
Hi all,
I have a board, similar to the MPC8541CDS, but with fixed DDR SDRAM,
instead of DIMM slots. So I have to configure it without the help of
SPD_EEPROM.
I saw some code on MPC8540ADS board, like fixed_sdram() in
board/freescale/mpc8540ads/mpc8540ads.c and defines in
On Sun, Jul 19, 2009 at 07:39:38PM +0200, Wolfgang Denk wrote:
Commit 2419169f removed support for legacy NAND and disk on chip but
missed to update the code for a few boards. This patch fixes the
resulting build issues.
Signed-off-by: Wolfgang Denk w...@denx.de
Doh, apparently I forgot to
Dear Scott Wood,
In message 20090728202053.ga28...@b07421-ec1.am.freescale.net you wrote:
Sorry about that.
No problem.
...
#define CONFIG_CMD_PING
diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h
index 167285e..d060cb7 100644
--- a/include/configs/NETTA2.h
+++
Dear Weirich, Bernhard,
In message ce92b8b581b4584fb8ca86b51ede8ac51640bae...@wupexchange.riedel.net
you wrote:
Fixed some indentations since patch from 2009-06-09.
Hope this is good now, anyway the whole ext2fs.c file does not conform to
coding style guidelines, so maybe someone wants to
Make the ext2load command return 0 on success (instead of the file
length).
Also fix output format (get rid of randoim newlines) and some coding
style issues (long lines etc.).
Signed-off-by: Wolfgang Denk w...@denx.de
---
common/cmd_ext2.c | 74
On Mon, Jul 20, 2009 at 01:41:01PM +0100, muralitharan.peru...@pace.com wrote:
Hi,
Can I modify the oob bytes in NAND using U-boot commands like this:
nand write.oob 0x800 0x0 64 [This should modify the oob bytes of
page 0].
Try nand write.oob 800 0 40. Constants in
Remove bogus newline character that got added to the .name field of
the disk_partition_t structure.
Signed-off-by: Wolfgang Denk w...@denx.de
---
disk/part_dos.c | 15 ++-
disk/part_efi.c |2 +-
disk/part_iso.c | 15 ++-
3 files changed, 21 insertions(+), 11
Commit 2b3f12c2 added support for configurable SMC Rx buffer length on
8xx systems. Enable this feature on TQM8xx* based boards.
This fixes the problem that pasting text in the middle of a line
(i. e. inserting in edit mode) did not work - only the first two
characters got inserted, the rest was
On Tue, 2009-07-28 at 19:49 +0200, Wolfgang Denk wrote:
Dear John Schmoller,
In message cover.1248798202.git.jschmol...@xes-inc.com you wrote:
I've been working on writing a User's Manual generation tool, and before
I get too far I'd like to see if this is something the U-Boot
On Tue, 2009-07-28 at 19:52 +0200, Wolfgang Denk wrote:
Dear John Schmoller,
In message
310e8398479f23a6bfaceccf6cc86631b7bff4dc.1248798202.git.jschmol...@xes-inc.com
you wrote:
Add support to a small subset of commands, environment
variables, and POSTs. These are meant to show the
On Tue, Jul 21, 2009 at 04:17:43PM +0530, Poonam Aggrwal wrote:
+int cpu_numcores() {
+ struct cpu_type *cpu;
+ cpu = gd-cpu;
+ return cpu-num_cores;
+}
Shouldn't this check CONFIG_MP and return 1 if not set? Otherwise you
get a weird mix of MP and UP.
The checks to warn the
Dear John,
in message 1248813631.3915.102.ca...@johns you wrote:
It seems to me that DUTS is designed to test U-Boot and also automates
the running of commands whose output can be put online in the DULG. I
Correct. And the DULG itself is a wiki (TWiki at the moment, to be
converted to Foswiki
On Wed, Jul 22, 2009 at 10:47:22PM +0800, xbl1986 wrote:
CPU:LPC3250.
I don't see that string anywhere in the U-Boot tree -- what NAND driver
are you using?
Nand:K9F2G8U0A 256M
the u-boot boot time now about 8s.
the step to read linux kernel less 2M cost more or less 4s!!
I want to make it
Dear John,
in message 1248813749.3915.104.ca...@johns you wrote:
It's true, I was a little lax on commenting the I2C commands. If I were
to move forward with this documentation tool, I would comment these
commands more thoroughly like I did with the Memory commands.
Hm... of course I'm
The compile error was caused by a recent patch. Affected platforms -
M5253DEMO.h, M5253EVBE.h, and M54455EVB.h. Adding the _IO_BASE
automatically defined to 0 in asm-m68k/io.h if it isn't set in
platform configuration file.
Signed-off-by: TsiChung Liew tsicl...@gmail.com
---
Change %08lX to %08X in board.c. Remove unused variable
'oscillator' in mcf5227x/cpu_init.c and 'scm2' in
mcf532x/cpu_init.c. Provide argument type cast in
drivers/dma/MCD_dmaApi.c.
Signed-off-by: TsiChung Liew tsicl...@gmail.com
---
cpu/mcf5227x/cpu_init.c |1 -
cpu/mcf532x/cpu_init.c |
Provide function protocol for icache_invalid().
Signed-off-by: TsiChung Liew tsicl...@gmail.com
---
drivers/net/mcffec.c |4
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c
index 64be5de..d3741a7 100644
---
-Original Message-
From: Wood Scott-B07421
Sent: Wednesday, July 29, 2009 2:39 AM
To: Aggrwal Poonam-B10812
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] [PATCH 1/2] Removed CONFIG_NUM_CPUS for
85xx and 86xx Freescale processors.
On Tue, Jul 21, 2009 at 04:17:43PM +0530,
Aggrwal Poonam-B10812 wrote:
-Original Message-
From: Wood Scott-B07421
Sent: Wednesday, July 29, 2009 2:39 AM
To: Aggrwal Poonam-B10812
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] [PATCH 1/2] Removed CONFIG_NUM_CPUS for
85xx and 86xx Freescale processors.
On Tue, Jul
Dear TsiChung Liew,
In message 1248799132-29720-1-git-send-email-tsicl...@gmail.com you wrote:
Provide function protocol for icache_invalid().
Signed-off-by: TsiChung Liew tsicl...@gmail.com
---
drivers/net/mcffec.c |4
1 files changed, 4 insertions(+), 0 deletions(-)
diff
On Tue 28 Jul 2009 17:27, Wolfgang Denk pondered:
Dear John,
in message 1248813631.3915.102.ca...@johns you wrote:
It seems to me that DUTS is designed to test U-Boot and also automates
the running of commands whose output can be put online in the DULG. I
Correct. And the DULG itself
Wolfgang,
Yes, I will do that for the next merging window. Ignore this patch.
Thanks!
Best Regards,
TsiChung
-Original Message-
From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de]
On Behalf Of Wolfgang Denk
Sent: Tuesday, July 28, 2009 4:59 PM
To: TsiChung Liew
On Fri, Jul 17, 2009 at 02:53:55PM +0400, Ilya Yanok wrote:
+/* OOB placement block for use with hardware ecc generation */
+static struct nand_ecclayout nand_hw_eccoob = {
+ .eccbytes = 5,
+ .eccpos = {6, 7, 8, 9, 10},
+ .oobfree = {{0, 5}, {11, 5}, }
+};
+
+#ifndef
On Sun, Jul 26, 2009 at 11:26:18PM +0200, Wolfgang Denk wrote:
Dear Kenneth Johansson,
In message 1248453626.8967.27.ca...@localhost.localdomain you wrote:
Well, if you think fixing the problems is paper taping over the
issue, then how do you call NOT fixing the problems and shutting
On Tue, Jul 28, 2009 at 10:42 PM, Jean-Christophe
PLAGNIOL-VILLARDplagn...@jcrosoft.com wrote:
On 07:58 Tue 28 Jul , Kyungmin Park wrote:
On Tue, Jul 28, 2009 at 5:09 AM, Jean-Christophe
PLAGNIOL-VILLARDplagn...@jcrosoft.com wrote:
On 14:28 Fri 24 Jul , Kyungmin Park wrote:
On Fri,
On Mon, Jul 27, 2009 at 03:46:07PM -0700, Patrick Heffernan wrote:
I'm working on a custom MPC8313 board. It was booting up fine using NOR
flash and ext2 filesystem.
Configured u-boot and Linux and made transition to use NAND flash and
JFFS2 filesystem and now system hangs when running
Thanks, I figured it out. I was decompressing the kernel over itself in
RAM.
pat
-Original Message-
From: Scott Wood [mailto:scottw...@freescale.com]
Sent: Tuesday, July 28, 2009 4:15 PM
To: Patrick Heffernan
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] MPC8313 board hanging
On Mon,
Removed same code pieces from cpu/mpc85xx/cpu.c and cpu/mpc86xx/cpu.c
and moved to cpu/mpc8xxx/cpu.c(new file)
Signed-off-by: Poonam Aggrwal poonam.aggr...@freescale.com
---
based on u-boot version 2009.06
Makefile |2 +
cpu/mpc85xx/cpu.c| 70
The number of CPUs are getting detected dynamically by checking the processor
SVR value.
Also removed CONFIG_NUM_CPUS references from all the platforms with 85xx/86xx
processors.
This can help to use the same u-boot image across the platforms.
Also revamped and corrected few Freescale Copyright
All Rights Reserved conflicts with the GPL.
Signed-off-by: Kumar Gala kumar.g...@freescale.com
---
Wolfgang,
I would ask that you apply this now rather than later as it just addresses the
All Rights Reserved issue and doesn't change any functional code..
- k
Dear Scott,
In message 20090728225244.ga8...@b07421-ec1.am.freescale.net you wrote:
The patch title is bad -- it's not disabling warnings, it's disabling an
aspect of C99 that the code is incompatible with (and which is pretty
questionable in the first place with such low level code). Note
68 matches
Mail list logo