Hi Wolfgang,
On 12/17/2011 09:49 PM, Wolfgang Denk wrote:
In message 1323879110-8404-1-git-send-email-holger.bru...@keymile.com you
wrote:
Add a variable toolchain and configure the rootpath
for the nfsargs with this variable.
Signed-off-by: Holger Brunck holger.bru...@keymile.com
cc:
Dear Wolfgang Denk,
On 19 December 2011 13:27, Wolfgang Denk w...@denx.de wrote:
Dear Chander Kashyap,
In message 1324275424-29468-3-git-send-email-chander.kash...@linaro.org
you wrote:
Earliar ARM clock frequency was calculated by:
MOUTAPLL/(DIVAPLL + 1) which is actually returning
Hi Wolfgang,
On Sun, Nov 27, 2011 at 07:04:48AM +0200, Stefan Kristiansson wrote:
This patch series adds support for the OpenRISC 1000 architecture.
The OpenRISC architecture has been around for about a decade and
has experienced a revival in the last couple of years from the
efforts of a
On 19 December 2011 16:57, Wolfgang Denk w...@denx.de wrote:
Dear Chander Kashyap,
In message 1324275424-29468-3-git-send-email-chander.kash...@linaro.org you
wrote:
Earliar ARM clock frequency was calculated by:
MOUTAPLL/(DIVAPLL + 1) which is actually returning SCLKAPLL.
It is fixed by
Dear Wolfgang Denk,
On 19 December 2011 13:50, Chander Kashyap chander.kash...@linaro.orgwrote:
Dear Wolfgang Denk,
On 19 December 2011 13:27, Wolfgang Denk w...@denx.de wrote:
Dear Chander Kashyap,
In message 1324275424-29468-3-git-send-email-chander.kash...@linaro.org
you wrote:
Hi Stefano,
Le 19/12/2011 08:45, Stefano Babic a écrit :
Hi Albert,
please pull from u-boot-imx (a couple of fixes):
The following changes since commit a7b39185338c333a052728a7952b5f1cba4fc22a:
tools/setlocalversion: Update from the Linux Kernel (2011-12-17
20:58:48 +0100)
are available
Hi Pali,
On 19/12/11 18:17, Pali Rohár wrote:
On Monday 19 December 2011 00:57:27 Wolfgang Denk wrote:
Dear Pali =?ISO-8859-1?Q?Roh=E1r?=,
In message 1778406.ezGto4lKnu@pali-elitebook you wrote:
I'm sending third version of rx51 patches for u-boot. All patches was
checked by checkpatch.pl
On 16/12/2011 16:45, Tom Rini wrote:
On Fri, Dec 16, 2011 at 8:37 AM, Stefano Babic sba...@denx.de wrote:
Hi,
Hi Tom,
I'm going to mark this series as RFC in patchwork as I see you did
+#ifneq... in some Makefiles and I know you know better :) That said,
can you confirm MAKEALL -s omap3
Hi Tom,
Le 16/12/2011 23:20, Tom Rini a écrit :
On Wed, Dec 14, 2011 at 9:06 AM, Tom Rinitom.r...@gmail.com wrote:
On Tue, Dec 13, 2011 at 11:58 AM, Tom Rinitom.r...@gmail.com wrote:
The following changes since commit
953209bf5ef0889a1baa02aa0ed5324f53ff8fda: Wolfgang Grandegger (1):
Hi Andreas,
Le 08/12/2011 13:58, Andreas Bießmann a écrit :
Dear David Müller,
Am 08.12.2011 13:23, schrieb David Müller:
This patch fixes the s3c24x0 timer code to work with the ARM
relocation feature.
Signed-off-by: David Muellerd.muel...@elsoft.ch
---
Chander Kashyap (2):
Exynos: PWM: Add TCMPB3 field in pwm structure
Exynos: Fix ARM Clock frequency calculation
arch/arm/cpu/armv7/exynos/clock.c | 15 +--
arch/arm/include/asm/arch-exynos/pwm.h |2 +-
2 files changed, 10 insertions(+), 7 deletions(-)
--
1.7.5.4
Add TCMPB3 field in pwm structure, earliar this was res1.
Signed-off-by: Chander Kashyap chander.kash...@linaro.org
---
arch/arm/include/asm/arch-exynos/pwm.h |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/include/asm/arch-exynos/pwm.h
Earliar ARM clock frequency was calculated by:
MOUTAPLL/(DIVAPLL + 1) which is actually returning SCLKAPLL.
It is fixed by calculating it as follows:
ARMCLK=MOUTCORE / (DIVCORE + 1) / (DIVCORE2 + 1)
Signed-off-by: Chander Kashyap chander.kash...@linaro.org
---
Changes for V2:
- Fixed
Dear Holger Brunck,
In message 4eeef0d3.5040...@keymile.com you wrote:
+Last change: 24.11.2011
Does this really make any sense? Which date are you recording here/
When you (think) you last edited the file? When you applied the patch
to your local tree? When you submitted it for
Dear Chander Kashyap,
In message canuqghhq_+az6z100agouaumeuyxwh-hl6anpgrtowbadeq...@mail.gmail.com
you wrote:
In message 1324275424-29468-3-git-send-email-chander.kash...@linaro.org
you wrote:
Earliar ARM clock frequency was calculated by:
MOUTAPLL/(DIVAPLL + 1) which is actually
Hi David,
Le 03/12/2010 16:12, David Müller a écrit :
Hello
This patch adds support for print_cpuinfo on Samsung s3c24x0
based targets. If activated by #define CONFIG_DISPLAY_CPUINFO, the
chip ID and the 3 main cpu frequencies will be displayed.
Dave
Signed-off-by: David
Dear Wolfgang Denk,
On 19 December 2011 14:29, Wolfgang Denk w...@denx.de wrote:
Dear Chander Kashyap,
In message
canuqghhq_+az6z100agouaumeuyxwh-hl6anpgrtowbadeq...@mail.gmail.com you
wrote:
In message
1324275424-29468-3-git-send-email-chander.kash...@linaro.org
you wrote:
Dear Chander Kashyap,
In message 1324285004-32354-2-git-send-email-chander.kash...@linaro.org you
wrote:
Add TCMPB3 field in pwm structure, earliar this was res1.
Signed-off-by: Chander Kashyap chander.kash...@linaro.org
---
arch/arm/include/asm/arch-exynos/pwm.h |2 +-
1 files
Thomas Weber wrote:
This patch removes the unused definitions:
CONFIG_OMAP3_MICRON_DDR
CONFIG_OMAP3_NUMONYX_DDR
CONFIG_OMAP3_INFINEON_DDR
Signed-off-by: Thomas Weberwe...@corscience.de
Acked-by: Luca Ceresoli luca.ceres...@comelit.it
Luca
___
Hi Wolfgsng Denk,
On 19 December 2011 14:33, Wolfgang Denk w...@denx.de wrote:
Dear Chander Kashyap,
In message 1324285004-32354-2-git-send-email-chander.kash...@linaro.org
you wrote:
Add TCMPB3 field in pwm structure, earliar this was res1.
Signed-off-by: Chander Kashyap
Dear KRONSTORFER Horst,
In message 024fe3275ef7814d9b07390f28c0832c63a20...@vie196nt.frequentis.frq
you wrote:
Can you please describe a test case that shows this bug?
host:
echo foo=bar env.txt
mkenvimage -b -s 13 -o env.bin env.txt
be target:
tftp 20 env.bin
env import -c
Hi all,
On Sun, 18 Dec 2011 00:19:34 +0100
Wolfgang Denk w...@denx.de wrote:
...
as you may have seen from some of my confirmation messages, I have
started a next branch.
Please feel free to send pull-requests for next, or to point me to
patches that should go into next (or even into the
Hi Heiko,
On Tue, 13 Dec 2011 07:37:17 +0100
Heiko Schocher h...@denx.de wrote:
Fix:
cmd_pxe.c: In function 'parse_pxefile_top':
cmd_pxe.c:941:5: warning: 'err' may be used uninitialized in this
function [-Wuninitialized]
cmd_pxe.c:921:6: note: 'err' was declared here
Signed-off-by:
This patchset adds an i2c bus based TPM driver.
Changes in v1:
- Update s-o-b Peter Huewe's email address
- Squash patch #3 into patch #2
Changes in v2:
- Style improvements
Che-Liang Chiou (2):
tpm: Rename generic_lpc_tpm to tpm_tis_lpc
tpm: Add i2c TPM driver
Makefile
The new name is more aligned with Linux kernel's naming of TPM driver.
Signed-off-by: Peter Huewe peter.hu...@infineon.com
Signed-off-by: Che-Liang Chiou clch...@chromium.org
Acked-by: Mike Frysinger vap...@gentoo.org
---
Changes in v1:
- Update s-o-b Peter Huewe's email address
Makefile
Peter Huewe implemented the original driver; this patch only reorganizes
the code structure of the driver, and does not make logical changes.
tpm.c implements the interface defined in tpm.h based on underlying
LPC or i2C TPM driver. tpm.c and the underlying driver communicate
throught
On Sat, Dec 17, 2011 at 1:21 AM, Mike Frysinger vap...@gentoo.org wrote:
On Wednesday 14 December 2011 03:48:24 Che-Liang Chiou wrote:
--- /dev/null
+++ b/drivers/tpm/tpm.c
+int tis_sendrecv(const uint8_t *sendbuf, size_t send_size, uint8_t
*recvbuf, + size_t *recv_len)
+{
+
On Sun, Dec 18, 2011 at 4:33 AM, Wolfgang Denk w...@denx.de wrote:
Dear Che-Liang Chiou,
In message 1323852504-19954-3-git-send-email-clch...@chromium.org you wrote:
Peter Huewe implemented the original driver; this patch only reorganizes
the code structure of the driver, and does not make
Hi Heiko,
Le 15/09/2011 07:16, Heiko Schocher a écrit :
Signed-off-by: Heiko Schocherh...@denx.de
Cc: Albert ARIBAUDalbert.u.b...@aribaud.net
Cc: Gerald van Barengvb.ub...@gmail.com
---
arch/arm/lib/bootm.c |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git
Hi Simon,
Le 10/10/2011 22:24, Simon Glass a écrit :
It seems that few people use CONFIG_PRAM on ARM. The getenv_r() function has
been renamed to getenv_f().
Please correct the commit message: it does not rename the function, it
switches from callong the _r version to calling the _f version.
Le 19/12/2011 10:23, Anatolij Gustschin a écrit :
Hi all,
On Sun, 18 Dec 2011 00:19:34 +0100
Wolfgang Denkw...@denx.de wrote:
...
as you may have seen from some of my confirmation messages, I have
started a next branch.
Please feel free to send pull-requests for next, or to point me to
On Mon, 19 Dec 2011 11:27:51 +0100
Albert ARIBAUD albert.u.b...@aribaud.net wrote:
...
These two patches
http://patchwork.ozlabs.org/patch/126542/
http://patchwork.ozlabs.org/patch/126546/
fix broken building for 6 boards/configurations:
sbc35_a9g20_eeprom
sbc35_a9g20_nandflash
Hi Wolfgang,
On 12/19/2011 09:57 AM, Wolfgang Denk wrote:
In message 4eeef0d3.5040...@keymile.com you wrote:
+Last change: 24.11.2011
Does this really make any sense? Which date are you recording here/
When you (think) you last edited the file? When you applied the patch
to your local
Hi Anatolij,
Le 19/11/2011 12:59, Anatolij Gustschin a écrit :
MACH_TYPE_TNY_A9G20 and MACH_TYPE_TNY_A9260 were removed
from mach-types.h. Add them to the board config file.
Signed-off-by: Anatolij Gustschinag...@denx.de
---
board/calao/tny_a9260/tny_a9260.c |5 -
Hi Anatolij,
Le 19/11/2011 12:59, Anatolij Gustschin a écrit :
MACH_TYPE_SBC35_A9G20 was removed from mach-types.h.
Add it to the board config file.
Signed-off-by: Anatolij Gustschinag...@denx.de
---
board/calao/sbc35_a9g20/sbc35_a9g20.c |1 -
include/configs/sbc35_a9g20.h |
On Sun, Dec 18, 2011 at 4:35 AM, Wolfgang Denk w...@denx.de wrote:
Dear Che-Liang Chiou,
In message 1323852504-19954-2-git-send-email-clch...@chromium.org you wrote:
The new name is more aligned with Linux kernel's naming of TPM driver.
Signed-off-by: Peter Huewe peter.hu...@infineon.com
Commit bdbcdc89 pxa: convert pxa27x_udc to use read and write
functions added a number of C++ comments. Fix these.
Signed-off-by: Wolfgang Denk w...@denx.de
---
drivers/usb/gadget/pxa27x_udc.c |5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git
Fix trailing white space, indentation by spaces instead of TABs,
excessive blank lines, trailing blank lines.
Signed-off-by: Wolfgang Denk w...@denx.de
---
arch/arm/include/asm/arch-davinci/da8xx-fb.h |1 -
arch/sh/lib/ashrsi3.S|2 +-
doc/README.menu
Hi everybody,
I've just released v2011.12-rc2; please help testing.
Please respond quickly if you find anything missing for the final
release, I want to get this out on Friday at latest.
Thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev
Dear Che-Liang Chiou,
In message 1324288224-5075-1-git-send-email-clch...@chromium.org you wrote:
This patchset adds an i2c bus based TPM driver.
Are there any users of this driver?
I see we are adding TPM code, but so far this is all dead code as
there are no users for it.
Best regards,
Dear Holger Brunck,
In message 4eef13d4.5020...@keymile.com you wrote:
You can insert such information when you export the files from git,
say by adding a line like:
Last commit date: $Format:%H %cD$
...
After reading the doc I don't know how it could be used in my usecase. Please
Dear Wolfgang Denk,
In message 1324292417-23817-1-git-send-email...@denx.de you wrote:
Commit bdbcdc89 pxa: convert pxa27x_udc to use read and write
functions added a number of C++ comments. Fix these.
Signed-off-by: Wolfgang Denk w...@denx.de
---
drivers/usb/gadget/pxa27x_udc.c |5
Dear Che-liang Chiou,
In message canjuy2jq3nf2mjpxrs-8jgksiv1zg2sfcnqdmrksaqpifup...@mail.gmail.com
you wrote:
Should we not rather remove all this dead code again?
Until today there are no users for this code in mainline, and no
patches have been submitted that intend to use it.
On 19/12/2011 12:23, Wolfgang Denk wrote:
Hi everybody,
I've just released v2011.12-rc2; please help testing.
Please respond quickly if you find anything missing for the final
release, I want to get this out on Friday at latest.
mx51evk is broken - fix merged, Albert has already merged my
On 12/10/2011 05:29 PM, Remy Bohmer wrote:
Hi,
2011/12/5 Vincent Palatin vpala...@chromium.org:
According to EHCI specification v1.0, the controller should stabilize
the power on a port at most 20 ms after the port power bit transition.
So, we put this setting in the virtual descriptor
Dear Wolfgang,
On 19.12.2011 12:23, Wolfgang Denk wrote:
Hi everybody,
I've just released v2011.12-rc2; please help testing.
Please respond quickly if you find anything missing for the final
release, I want to get this out on Friday at latest.
avr32 is still broken. Anatolij has taken
Hello Andreas,
On Mon, 19 Dec 2011 13:21:51 +0100
Andreas Bießmann andreas.de...@googlemail.com wrote:
Dear Wolfgang,
On 19.12.2011 12:23, Wolfgang Denk wrote:
Hi everybody,
I've just released v2011.12-rc2; please help testing.
Please respond quickly if you find anything missing
For the i.mx6q, the burned-in MAC address will be the following odering,
fuse: 0x620[7:0] MAC_ADDR[7:0] --- mac[5]
fuse: 0x620[15:8] MAC_ADDR[15:8]--- mac[4]
fuse: 0x620[23:16] MAC_ADDR[23:16] --- mac[3]
fuse: 0x620[31:24] MAC_ADDR[31:24] --- mac[2]
fuse: 0x630[7:0]
Hi all,
Le 19/12/2011 13:07, Stefano Babic a écrit :
On 19/12/2011 12:23, Wolfgang Denk wrote:
Hi everybody,
I've just released v2011.12-rc2; please help testing.
Please respond quickly if you find anything missing for the final
release, I want to get this out on Friday at latest.
mx51evk
Hi Wolfgang,
On 12/19/2011 12:33 PM, Wolfgang Denk wrote:
In message 4eef13d4.5020...@keymile.com you wrote:
You can insert such information when you export the files from git,
say by adding a line like:
Last commit date: $Format:%H %cD$
...
After reading the doc I don't know how it
On 12/19/2011 01:51 PM, Vincent Palatin wrote:
On Mon, Dec 19, 2011 at 04:07, Wolfgang Grandegger w...@grandegger.com
wrote:
I just realized that this patch breaks usb start on my mx53loco board:
MX53LOCO U-Boot usb start
(Re)start USB...
USB: Register 10011 NbrPorts 1
USB EHCI
Dear Marek Vasut,
On 12/17/2011 05:17 AM, Marek Vasut wrote:
Hi Fabio,
On 12/16/2011 12:07 AM, Fabio Estevam wrote:
Tested boot via SD card and by loading a kernel via TFTP through
the FEC interface.
Have you any idea why this works from SD card but not by USB recovery
using exactly same sb
Fix:
universal.c: In function 's5pc210_phy_control':
universal.c:273:7: warning: 'ret' may be used uninitialized
in this function [-Wuninitialized]
Signed-off-by: Anatolij Gustschin ag...@denx.de
Cc: Lukasz Majewski l.majew...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
---
Fix:
In file included from s3c_udc_otg.c:216:0:
s3c_udc_otg_xfer_dma.c: In function 'complete_tx':
s3c_udc_otg_xfer_dma.c:280:33: warning: variable 'is_short' set but not used
s3c_udc_otg_xfer_dma.c:280:6: warning: variable 'ep_tsr' set but not used
s3c_udc_otg_xfer_dma.c: In function
Hi Marek,
On 12/18/2011 07:50 PM, Marek Vasut wrote:
The ecc.size for mxs NAND driver is set to 1 in Linux kernel and to 512 in
U-Boot, which causes ubi part command malfunction due to wrong subpage size.
[snip]
Subpage size is now reported correctly and ubifs works fine. Thanks!
Tested-by:
On Mon, Dec 19, 2011 at 04:07, Wolfgang Grandegger w...@grandegger.com wrote:
I just realized that this patch breaks usb start on my mx53loco board:
MX53LOCO U-Boot usb start
(Re)start USB...
USB: Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 1 USB Device(s)
Fix:
universal.c: In function 's5pc210_phy_control':
universal.c:273:7: warning: 'ret' may be used uninitialized
in this function [-Wuninitialized]
Signed-off-by: Anatolij Gustschin ag...@denx.de
Cc: Lukasz Majewski l.majew...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
---
Hi Marek,
On 12/18/2011 07:50 PM, Marek Vasut wrote:
The ecc.size for mxs NAND driver is set to 1 in Linux kernel and to 512
in U-Boot, which causes ubi part command malfunction due to wrong
subpage size.
[snip]
Subpage size is now reported correctly and ubifs works fine. Thanks!
-Original Message-
From: u-boot-boun...@lists.denx.de
[mailto:u-boot-boun...@lists.denx.de] On Behalf Of Wolfgang Denk
Sent: Monday, December 19, 2011 4:41 PM
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] Coding Style cleanup
Fix trailing white space, indentation by spaces
Hi all,
On Mon, 19 Dec 2011 16:00:21 +0100
Lukasz Majewski l.majew...@samsung.com wrote:
...
diff --git a/board/samsung/universal_c210/universal.c
b/board/samsung/universal_c210/universal.c index 8393e4f..d0ff834
100644 --- a/board/samsung/universal_c210/universal.c
+++
Dear Holger Brunck,
In message 4eef350c.4040...@keymile.com you wrote:
hm together with the needed git configuration IMO a bit to complicated for my
needs. To be honest I would like to keep this date information as it is.
OK, as you like it.
If this is not acceptable then I will remove
On 12/19/2011 05:05 PM, Marek Vasut wrote:
You're the guy doing the bluegiga mx28 board ? I think I noticed in linux
kernel, are you for example working on mx28/device tree support too?
Yes, I have done something but most of kernel stuff related to our board
is done by my colleague Lauri
Dear Wolfgang Grandegger,
In message 4eef290b.9060...@grandegger.com you wrote:
The device is not found at the first attempt. Obviously, a value of 10
for bPwrOn2PwrGood seems too short but 20 works fine. Would that be a
resonable compromise? If yes, I could send a patch.
If 10 doesn't work,
Dear Premi, Sanjeev,
In message e28aafd00efaa646ae3df9b89cd24a8909b...@dbde01.ent.ti.com you wrote:
@@ -563,6 +556,7 @@ extern unsigned long=20
get_board_sys_clk(unsigned long dummy);
tftp $fdtaddr $tftppath/$fdtfile; =09
\
bootm $loadaddr - $fdtaddr
=20
+
On 12/19/2011 02:37 AM, Igor Grinberg wrote:
Hi Peter,
Thanks for fixing all the issues pointed.
I have one last question (sorry for not seeing it earlier) and one neat below.
On 12/18/11 19:25, Peter Barada wrote:
This patch adds basic support for OMAP35x/DM37x SOM LV/Torpedo
reference
Dear Lukasz,
In message 20111219161828.7495c109@wker Anatolij Gustschin wrote:
I used GCC version 4.2.2 from ELDK 4.2 and GCC version 4.6.1 20110627
from ELDK 5.1 and see this warning with both.
Note: ELDK 5.1 is based on Yocto 1.1 (edison-6.0 release tag), plus
some fixes for ARM related
Hi Marek, Albert,
On Mon, 12 Dec 2011 16:34:03 +0100
Marek Vasut marek.va...@gmail.com wrote:
GPIO configuration shall never be done inside a driver, never.
Signed-off-by: Marek Vasut marek.va...@gmail.com
Cc: Anatolij Gustschin ag...@denx.de
Cc: Albert ARIBAUD albert.u.b...@aribaud.net
Le 19/12/2011 16:57, Anatolij Gustschin a écrit :
Hi Marek, Albert,
On Mon, 12 Dec 2011 16:34:03 +0100
Marek Vasutmarek.va...@gmail.com wrote:
GPIO configuration shall never be done inside a driver, never.
Signed-off-by: Marek Vasutmarek.va...@gmail.com
Cc: Anatolij Gustschinag...@denx.de
On Mon, 19 Dec 2011 17:15:03 +0100
Albert ARIBAUD albert.u.b...@aribaud.net wrote:
Le 19/12/2011 16:57, Anatolij Gustschin a écrit :
Hi Marek, Albert,
On Mon, 12 Dec 2011 16:34:03 +0100
Marek Vasutmarek.va...@gmail.com wrote:
GPIO configuration shall never be done inside a driver,
Le 19/12/2011 16:57, Anatolij Gustschin a écrit :
Hi Marek, Albert,
On Mon, 12 Dec 2011 16:34:03 +0100
Marek Vasutmarek.va...@gmail.com wrote:
GPIO configuration shall never be done inside a driver, never.
Signed-off-by: Marek Vasutmarek.va...@gmail.com
Cc: Anatolij
Dear Marek Vasut,
In message 201112191725.00963.marek.va...@gmail.com you wrote:
It wasn't ... only compile-tested. Does someone have a lubbock?
Lubbock is orphaned, no testers are known.
If it's compile clean, that should be good enough.
Best regards,
Wolfgang Denk
--
DENX Software
Hi Wolfgang,
Le 19/12/2011 17:33, Wolfgang Denk a écrit :
Dear Marek Vasut,
In message201112191725.00963.marek.va...@gmail.com you wrote:
It wasn't ... only compile-tested. Does someone have a lubbock?
Lubbock is orphaned, no testers are known.
If it's compile clean, that should be good
Hi,
I am trying to port support for a board from Oxford Semiconductor to
the current head of the git repository.
Medion released GPL Sources of their P89626 NAS [1].
In these sources there are using an old version 1.1.2 of U-Boot with
some modification a board from Oxford Semiconductor. The
When I use the sspi command 'sspi 1 24 0301ff' it causes the chip select
line to toggle between each byte.
It would be low for the 03, then a quick low-high-low transition
between the next byte '01.' This is causing me all kinds of grief with
the part.
Is there a setting to fix this or do
Hi Wolfgang,
The following changes since commit 901de79a3792c81aefcbf207a34049e63f21362b:
Prepare v2011.12-rc2 (2011-12-19 12:12:54 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Anatolij Gustschin (3):
Fix building for mx51evk board
Hi Wolfgang,
2011/12/19 Wolfgang Grandegger w...@grandegger.com:
On 12/19/2011 01:51 PM, Vincent Palatin wrote:
On Mon, Dec 19, 2011 at 04:07, Wolfgang Grandegger w...@grandegger.com
wrote:
I just realized that this patch breaks usb start on my mx53loco board:
The device is not found at
Hi Wolfgang,
Le 19/12/2011 17:33, Wolfgang Denk a écrit :
Dear Marek Vasut,
In message201112191725.00963.marek.va...@gmail.com you wrote:
It wasn't ... only compile-tested. Does someone have a lubbock?
Lubbock is orphaned, no testers are known.
If it's compile clean, that
On Dec 17, 2011, at 15:16, Wolfgang Denk wrote:
Dear Kyle Moffett,
In message 1324001821-15337-1-git-send-email-kyle.d.moff...@boeing.com you
wrote:
When using an offboard ethernet chip such as e1000, it is highly likely
that the driver has already read a valid MAC address from the onboard
Dear Moffett, Kyle D,
In message 58a08f2d-4743-4634-a909-466eb8535...@boeing.com you wrote:
Yes, it should. The rule is that then environment settings always
have precedence, and if they are missing or contain different data
than other sources for this information, a waning shall be
Hey all,
I'm attempting to use CONFIG_NAND_ENV_DST work, and I'm wondering it
what I see as the intent of the option is the real intent as it's not
working without patches, but perhaps I'm just using it wrong. What
I'm trying to have done is that if the above is set, SPL will read the
Dear Michael Kebe,
In message cakkm46savtnor5qxgcnbjkz76aesy-lurh--in4capj_sbb...@mail.gmail.com
you wrote:
When I am trying to build, I get this error from the linker (I also
tried the toolchain which is included in the download from Medion):
...
On Mon, Dec 19, 2011 at 08:59, Remy Bohmer li...@bohmer.net wrote:
Hi Wolfgang,
2011/12/19 Wolfgang Grandegger w...@grandegger.com:
On 12/19/2011 01:51 PM, Vincent Palatin wrote:
On Mon, Dec 19, 2011 at 04:07, Wolfgang Grandegger w...@grandegger.com
wrote:
I just realized that this patch
On 12/19/2011 11:58 AM, Tom Rini wrote:
Hey all,
I'm attempting to use CONFIG_NAND_ENV_DST work, and I'm wondering it
what I see as the intent of the option is the real intent as it's not
working without patches, but perhaps I'm just using it wrong. What
I'm trying to have done is that if
On Mon, Dec 19, 2011 at 11:57 AM, Scott Wood scottw...@freescale.com wrote:
On 12/19/2011 11:58 AM, Tom Rini wrote:
Hey all,
I'm attempting to use CONFIG_NAND_ENV_DST work, and I'm wondering it
what I see as the intent of the option is the real intent as it's not
working without patches, but
On Mon, Dec 19, 2011 at 18:58, Wolfgang Denk w...@denx.de wrote:
Try a known to be working (with current code) tool chain?
Dear Wolfgang,
I can built other boards with the same toolchain.
I think I know what I did wrong:
#define CONFIG_SYS_UBOOT_BASE -1
#define CONFIG_SYS_TEXT_BASE -1
To
Dear Michael Kebe,
In message cakkm46tnid46gwnl_d+xux-ga+wt-zg1pgt2-_0wjdklnil...@mail.gmail.com
you wrote:
CONFIG_SYS_TEXT_BASE is still missing. There is no documentation on
this. Any hints?
Check the old sources for a board specific config.mk file ...
Best regards,
Wolfgang Denk
--
On 12/18/2011 11:50 AM, Marek Vasut wrote:
The ecc.size for mxs NAND driver is set to 1 in Linux kernel and to 512 in
U-Boot, which causes ubi part command malfunction due to wrong subpage size.
Signed-off-by: Marek Vasut marek.va...@gmail.com
Cc: Wolfgang Denk w...@denx.de
Cc: Detlev
The U-Boot FAT driver appears to manually check for the existence of
an MS-DOS partition table, even when CONFIG_DOS_PARTITION is present
and working.
As a result, it is not possible to use the FAT driver on an ISO9660
El-Torito boot volume, because it does not have a DOS MBR and does
not pass
On 12/18/2011 11:50 AM, Marek Vasut wrote:
The ecc.size for mxs NAND driver is set to 1 in Linux kernel and to 512
in U-Boot, which causes ubi part command malfunction due to wrong
subpage size.
Signed-off-by: Marek Vasut marek.va...@gmail.com
Cc: Wolfgang Denk w...@denx.de
Cc:
On Dec 19, 2011, at 15:21, Kyle Moffett wrote:
The U-Boot FAT driver appears to manually check for the existence of
an MS-DOS partition table, even when CONFIG_DOS_PARTITION is present
and working.
As a result, it is not possible to use the FAT driver on an ISO9660
El-Torito boot volume,
On Mon, Dec 19, 2011 at 21:01, Wolfgang Denk w...@denx.de wrote:
Check the old sources for a board specific config.mk file ...
There is this in the old include/configs/ox820.h:
#define STATIC_CS0_BASE_PA 0x4100
#define CFG_NAND_BASE STATIC_CS0_BASE_PA
Do you think that's the correct
On 12/19/2011 02:23 PM, Marek Vasut wrote:
On 12/18/2011 11:50 AM, Marek Vasut wrote:
What specifically is happening in ubi part with ecc.size = 512?
The driver doesn\t support subpage writes.
Is this meant to be a workaround for the NAND layer ignoring a driver
setting
On 12/19/2011 02:23 PM, Marek Vasut wrote:
On 12/18/2011 11:50 AM, Marek Vasut wrote:
What specifically is happening in ubi part with ecc.size = 512?
The driver doesn\t support subpage writes.
Is this meant to be a workaround for the NAND layer ignoring a driver
setting
Hello,
The following changes since commit a69c1beefe8d1afb34c79a324a87a8951a793a59:
Fabio Estevam (1):
vision2: Fix checkpatch warning
are available in the git repository at:
git://git.denx.de/u-boot-ti.git next
Christian Riesch (7):
spl: display_options.o is required for SPI
Hi Tom,
Le 19/12/2011 22:20, Tom Rini a écrit :
Hello,
The following changes since commit a69c1beefe8d1afb34c79a324a87a8951a793a59:
Fabio Estevam (1):
vision2: Fix checkpatch warning
are available in the git repository at:
git://git.denx.de/u-boot-ti.git next
Christian Riesch
I am using the 405EX Kilauea Evaluation Board from
Applied Micro, and am
trying to get a Silicon Image 3124 PCIe to SATA adaptor
working on it.
I have modified the Kilauea configuration to include the
sata_sil driver with
the following in the configuration file:
#define
Dear Kyle,
In message 4edc0b2f-3d26-48a6-9cd9-0b40d6a01...@boeing.com you wrote:
The U-Boot FAT driver appears to manually check for the existence of
an MS-DOS partition table, even when CONFIG_DOS_PARTITION is present
and working.
As a result, it is not possible to use the FAT driver on an
Dear Michael Kebe,
In message cakkm46sctp7xqggo3f4hpd_sfgo1eoeirpyytbb4394xvfz...@mail.gmail.com
you wrote:
On Mon, Dec 19, 2011 at 21:01, Wolfgang Denk w...@denx.de wrote:
Check the old sources for a board specific config.mk file ...
There is this in the old include/configs/ox820.h:
On Mon, Dec 19, 2011 at 23:13, Wolfgang Denk w...@denx.de wrote:
No. As I mentioned, look for a config.mk file in the board directory,
i. e. probably board/ox820/config.mk or similar. This should contain
the definition of TEXT_BASE.
Thanks, for the hint! There is TEXT_BASE = 0x60d0.
Here
Hi all,
On Wed, 26 Oct 2011 14:39:54 +0200
Laszlo Hegedüs laszlo.heged...@gmail.com wrote:
Fix for the DP8381x driver to translate the pointers to the receive
Rinbuffer from a virtual address to the PCI memory space. TxRingPtr
is translated okay, but no memory translation was done for
1 - 100 of 128 matches
Mail list logo
