hi.. i am new to u-boot .
for my practice my team leader asked me to
cross compile arm720t modnet50 board with arm-none-linux compiler and now
asking me to compile the same source code with abacus-anurag-linux compiler
. will it be useful for me? and i am getting a
Hi Chander,
On 01/25/12 07:19, Chander Kashyap wrote:
> SMDK5250 board is based on Samsungs EXYNOS5250 SoC.
>
> Signed-off-by: Chander Kashyap
> ---
[...]
> diff --git a/board/samsung/smdk5250/dmc_init.c
> b/board/samsung/smdk5250/dmc_init.c
> new file mode 100644
> index 000..6f92d8a
> -
Dear Wilson Perez,
In message
you wrote:
>
> I am currently using u-boot-2009.11 on an Atmel at91sam9g45 and would like
> to add support for the SMSC9514 to be able to run tcp/ip over usb. The
U-Boot has only a minimal network stack; we can do some UDP, but we
cannot do TCP/IP.
> goal is to l
Hello Wolfgang,
The following changes since commit 137703b811502dfea364650fb3e17f20b4c21333:
overo: add SPL support (2012-01-16 08:40:13 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Patil, Rachna (3):
ARM: I2C: I2C Multi byte address support
Hello Patil,
Patil, Rachna wrote:
> Add i2c driver board hookup for AM335X EVM
>
> Signed-off-by: Chandan Nath
> Signed-off-by: Patil, Rachna
> ---
> Changes for v3:
> rebased, patches applied on top of master branch
>
> arch/arm/cpu/armv7/am33xx/clock.c |5 ++
> arch/arm/incl
Hello Patil,
Patil, Rachna wrote:
> 1. Compliant with Philips I2C specification version 2.1
> 2. Supports upto 100Kbps in standard mode
>
> Signed-off-by: Chandan Nath
> Signed-off-by: Patil, Rachna
> ---
> Changes for v3:
> rebased, patches applied on top of master branch
>
> drivers/i2c/oma
Hello Patil,
Patil, Rachna wrote:
> Existing OMAP I2C driver does not support address
> length greater than one. Hence this patch is to
> add support for 2 byte address read/write.
>
> Signed-off-by: Philip, Avinash
> Signed-off-by: Hebbar, Gururaja
> Signed-off-by: Patil, Rachna
> ---
> Chang
Hi list,
Someone know what is the last U-boot non-broken version for AT91RM9200-DK
Board?
I need the boot from compact flash feature, is that available on that
version?
I can not have that feature in default installed version (0.3.2 2003) right?
Thank you all
Jeef
Hello,
I am currently using u-boot-2009.11 on an Atmel at91sam9g45 and would like
to add support for the SMSC9514 to be able to run tcp/ip over usb. The
goal is to load kernel and filesystem images for system recovery via tftp
on a tcp/ip over usb interface.
Would you please guide me in the righ
On Tue, Jan 24, 2012 at 2:43 PM, Stephen Warren wrote:
> Colin Cross wrote at Tuesday, January 24, 2012 3:33 PM:
>> On Tue, Jan 24, 2012 at 2:08 PM, Stephen Warren wrote:
>> > Peter De Schrijver wrote at Tuesday, January 24, 2012 2:53 AM:
>> >> What about the peripheral resets which are also hand
It updates the missing gpio configuration of UART port.
Signed-off-by: Chander Kashyap
Cc: HeungJun, Kim
---
board/samsung/trats/trats.c |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index f795ff0..4c9773d 1
SMDK5250 board is based on Samsungs EXYNOS5250 SoC.
Signed-off-by: Chander Kashyap
---
Changes for v2:
- This patch is bifurcated into borad support and SoC support
- Fixed typo: s/EEYNOS/EXYNOS
- Squashed patch "SMDK5250: enable device tree support" in this.
Changes for v
This patch adds support for MMC SPL booting.
Signed-off-by: Chander Kashyap
---
Changes for v2:
- None
Changes for v3:
- None
Changes for v4:
- None
Changes for v5:
- None
Changes for v5:
- None
board/samsung/smdk5250/Makefile | 16
b
Samsung's ARM Cortex-A15 based SoCs are known as Exynos5 series of
SoCs. This patch adds the support for Exynos5.
Signed-off-by: Chander Kashyap
---
Changes for v2:
- This patch was part of "EXYNOS: Add SMDK5250 board support"
- Now it is seprated as SoC support.
Changes for v3:
CONFIG_SYS_CLK_FREQ_C210 macro giving notion of S5PC2XX (Exynos4)
architecture. Replace CONFIG_SYS_CLK_FREQ_C210 with CONFIG_SYS_CLK_FREQ
to make it generic for exynos architecture.
Signed-off-by: Chander Kashyap
---
Changes for v2:
- None
Changes for v3:
- None
Changes for V4:
This patchset add support for Samsung's SMDK5250 board based on
EXYNOS5250 based SoC. It also adds support for MMC SPL booting.
The porting is done by Samsung engineers at HQ in System LSI Team.
I am contributing in upstreaming the code for the board.
Based upon discussions following patches are
Hi,
Please ignore this patch set i will resend it.
On 25 January 2012 10:12, Chander Kashyap wrote:
> This patchset add support for Samsung's SMDK5250 board based on
> EXYNOS5250 based SoC. It also adds support for MMC SPL booting.
>
> The porting is done by Samsung engineers at HQ in System LSI
SMDK5250 board is based on Samsungs EXYNOS5250 SoC.
Signed-off-by: Chander Kashyap
---
Changes for v2:
- This patch is bifurcated into borad support and SoC support
- Fixed typo: s/EEYNOS/EXYNOS
- Squashed patch "SMDK5250: enable device tree support" in this.
Changes for v
CONFIG_SYS_CLK_FREQ_C210 macro giving notion of S5PC2XX (Exynos4)
architecture. Replace CONFIG_SYS_CLK_FREQ_C210 with CONFIG_SYS_CLK_FREQ
to make it generic for exynos architecture.
Signed-off-by: Chander Kashyap
---
Changes for v2:
- None
Changes for v3:
- None
Changes for V4:
Samsung's ARM Cortex-A15 based SoCs are known as Exynos5 series of
SoCs. This patch adds the support for Exynos5.
Signed-off-by: Chander Kashyap
---
Changes for v2:
- This patch was part of "EXYNOS: Add SMDK5250 board support"
- Now it is seprated as SoC support.
Changes for v3:
This patchset add support for Samsung's SMDK5250 board based on
EXYNOS5250 based SoC. It also adds support for MMC SPL booting.
The porting is done by Samsung engineers at HQ in System LSI Team.
I am contributing in upstreaming the code for the board.
Based upon discussions following patches are
This patch adds support for MMC SPL booting.
Signed-off-by: Chander Kashyap
---
Changes for v2:
- None
Changes for v3:
- None
Changes for v4:
- None
Changes for v5:
- None
board/samsung/smdk5250/Makefile | 16
board/samsung/smdk5250/mmc_boot.
Hi,
There are some changes in previous patch set.
> diff --git a/board/samsung/smdk5250/smdk5250.c
> b/board/samsung/smdk5250/smdk5250.c
> new file mode 100644
> index 000..2684620
> --- /dev/null
> +++ b/board/samsung/smdk5250/smdk5250.c
> @@ -0,0 +1,152 @@
> +/*
> + * Copyright (C) 2011 Sam
On 18 January 2012 17:42, Minkyu Kang wrote:
> Since MACH_TYPE_ORIGEN is updated on mach-types,
> remove the MACH_TYPE_ORIGEN on config file.
>
> Signed-off-by: Minkyu Kang
> Cc: Chander Kashyap
> ---
> include/configs/origen.h | 2 --
> 1 files changed, 0 insertions(+), 2 deletions(-)
>
ap
On 18 January 2012 16:21, Minkyu Kang wrote:
> Signed-off-by: Minkyu Kang
> Signed-off-by: Kyungmin Park
> Cc: HeungJun, Kim
> ---
> board/samsung/trats/trats.c | 11 +--
> 1 files changed, 1 insertions(+), 10 deletions(-)
>
applied to u-boot-samsung.
Minkyu Kang.
--
from. prom.
w
On 18 January 2012 16:21, Minkyu Kang wrote:
> This patch adds support the generic watchdog timer for s5pc1xx and exynos4
>
> Signed-off-by: Minkyu Kang
> Signed-off-by: Kyungmin Park
> Cc: HeungJun, Kim
> ---
> arch/arm/cpu/armv7/s5p-common/Makefile | 1 +
> arch/arm/cpu/armv7/s5p-co
> On Tue, Jan 24, 2012 at 11:25 PM, Marek Vasut wrote:
> > Now that IS CREEPY. You mean like ... just anything ? Or does the code
> > executed before need to be exactly long or longer than something ?
>
> Yes, my tests show that anything prior to
> mxs_iomux_setup_multiple_pads makes reboot to wo
On Tue, Jan 24, 2012 at 11:25 PM, Marek Vasut wrote:
> Now that IS CREEPY. You mean like ... just anything ? Or does the code
> executed
> before need to be exactly long or longer than something ?
Yes, my tests show that anything prior to
mxs_iomux_setup_multiple_pads makes reboot to work.
I a
> On Tue, Jan 24, 2012 at 9:48 PM, Marek Vasut wrote:
> > Can you explain why this patch fixes anything ? It's hard to understand
> > why doing this would fix it.
>
> Yes, I agree and that's why I marked it as RFC and please also see my
> comments below the --- line.
>
> I don't understand the r
On Tue, Jan 24, 2012 at 9:48 PM, Marek Vasut wrote:
> Can you explain why this patch fixes anything ? It's hard to understand why
> doing this would fix it.
Yes, I agree and that's why I marked it as RFC and please also see my
comments below the --- line.
I don't understand the reason for the f
> From: Marek Vasut
>
> Signed-off-by: Marek Vasut
> Signed-off-by: Vasily Khoruzhick
> ---
> v2: use struct-based access to regs, minor cleanup
> v3: fix multiple keypresses handling, minor cleanup
> v4: another minor cleanup
> v5: fix indentation issues in scan_keys(), remove udelay,
> in
> When running Linux on a mx28evk and issuing a 'reboot'command the following
> behaviour is observed:
>
> root@freescale /$ reboot
> starting pid 329, tty '': '/etc/rc.d/rcS stop'
> root@freescale /$ Stopping inetd:
> Terminated
> Unmounting filesystems
> umount: tmpfs busy - remounted read-only
This adds basic support for the Tegra2 USB controller. Board files should
call board_usb_init() to set things up.
Configuration is performed through the FDT, with aliases used to set the
order of the ports, like this fragment:
aliases {
/* This defines the order of our USB
This file is taken from the Linux mailing list.
Signed-off-by: Simon Glass
---
doc/device-tree-bindings/usb/tegra-usb.txt | 13 +
1 files changed, 13 insertions(+), 0 deletions(-)
create mode 100644 doc/device-tree-bindings/usb/tegra-usb.txt
diff --git a/doc/device-tree-bindings
We set up two USB ports, one of which can be host or device.
For some reason the kernel version does enable both ports.
Signed-off-by: Simon Glass
---
Changes in v2:
- Remove 0x from fdt aliases
- Use "okay" instead of "ok" for fdt node status
Changes in v3:
- Disable USB2 which is not used on S
This adds basic USB support for port 0. The other port is not supported
yet.
Tegra2 (SeaBoard) # usb start
(Re)start USB...
USB: Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 5 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
Tegra2 (
This switches Seaboard over to use FDT for run-time config instead of
CONFIG options. USB is the only user at present.
Signed-off-by: Simon Glass
---
Changes in v3:
- Drop Tegra USB alignment patch as we will deal with this another way
include/configs/seaboard.h |5 +
1 files changed, 5
All Tegra2 boards should include tegra2-common. This adds the required
USB config to that file.
Signed-off-by: Simon Glass
---
Changes in v5:
- Add CONFIG_EHCI_DCACHE which is needed for dcache operation
- Drop unused CONFIG_USB_EHCI_DATA_ALIGN option
include/configs/tegra2-common.h | 10
This adds a basic binding for the oscillator and peripheral clocks. The
second cell is the clock number, defined as the bit number within the clock
enable register if the peripheral clock.
This uses the RFC clock bindings from Grant Likely so may change later:
https://lkml.org/lkml/2011/12/12/498
Add a directory to hold device tree binding files, to permit easy review
of this material in U-Boot patches.
Signed-off-by: Simon Glass
---
Changes in v4:
- Add staging area for device tree bindings used in U-Boot
Changes in v5:
- Update README to indicate that we will commit fdt documentation t
This adds clock references to the USB part of the device tree for U-Boot.
The USB timing information may vary between boards sometimes, but for
now we hard-code it in C. This is because all current T2x boards use
the same values, we will deal with T3x later and we first need to agree
on the format
A common requirement is to find the clock ID for a peripheral. This is the
second cell of the 'clocks' property (the first being the phandle itself).
Signed-off-by: Simon Glass
---
Changes in v4:
- Add fdtdec function to return peripheral ID
include/fdtdec.h | 13 +
lib/fdtdec.c
Seaboard has a top port which is USB host or device, and a side port which
is host only.
Signed-off-by: Simon Glass
---
Changes in v2:
- Remove unneeded CONFIG_TEGRA_USBx defines
include/configs/seaboard.h |7 +++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/include/co
This was taken from commit b48c54e2 at:
git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra.git
config.mk is updated to provide this file to boards through the
built-in mechanism:
/include/ ARCH_CPU_DTS
Signed-off-by: Simon Glass
---
arch/arm/cpu/armv7/tegra2/config.mk |2 +
arch/arm
By putting the fdt blob into a distinctive area we can ensure that it appears
at the start of the data section and is word-aligned.
Note: It does not seem to be possible to get objcopy to honour its
--section-alignment flag, which would otherwise provide an easier fix
for this problem.
Signed-off
This adds a property to indicate a port which can switch between host and device
mode.
Signed-off-by: Simon Glass
---
Changes in v5:
- Add dr_mode property to control host/device/otg mode
- Add nvidia,has-legacy-mode property per review comments
doc/device-tree-bindings/usb/tegra-usb.txt | 12
This adds some support into fdtdec for reading GPIO definitions from
the fdt. We permit up to FDT_GPIO_MAX GPIOs in the system. Each GPIO
is of the form:
gpio-function-name = ;
where:
phandle is a pointer to the GPIO node
gpio_num is the number of the GPIO (0 to 223)
flags is a flag, as follows:
This was taken from commit b48c54e2 at:
git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra.git
Signed-off-by: Simon Glass
---
board/nvidia/dts/tegra2-seaboard.dts | 36 ++
1 files changed, 36 insertions(+), 0 deletions(-)
create mode 100644 board/nvidia/
CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the txfilltuning
field in the EHCI controller on reset.
Signed-off-by: Simon Glass
Acked-by: Remy Bohmer
---
README |3 +++
drivers/usb/host/ehci-hcd.c |7 +++
drivers/usb/host/ehci.h |6 +-
3 files c
This was taken from commit b48c54e2 at:
git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra.git
Signed-off-by: Simon Glass
---
arch/arm/dts/skeleton.dtsi | 13 +
1 files changed, 13 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/dts/skeleton.dtsi
diff --git a/arc
This series brings in the Linux kernel fdt file and provides a working
USB driver for Tegra2 Seaboard.
(I have done this in one series since otherwise most of the fdt additions
will just look like dead code.)
The driver requires CONFIG_OF_CONTROL and a device tree to operate.
Some enhancements t
Hi Stephen,
On Tue, Jan 24, 2012 at 3:14 PM, Stephen Warren wrote:
> Simon Glass wrote at Tuesday, January 24, 2012 4:12 PM:
>> On Mon, Jan 23, 2012 at 10:18 AM, Stephen Warren wrote:
>> > On 01/21/2012 10:08 AM, Simon Glass wrote:
>> >> Hi Stephen,
>> >>
>> >> On Wed, Jan 18, 2012 at 2:17 PM, S
Simon Glass wrote at Tuesday, January 24, 2012 4:12 PM:
> On Mon, Jan 23, 2012 at 10:18 AM, Stephen Warren wrote:
> > On 01/21/2012 10:08 AM, Simon Glass wrote:
> >> Hi Stephen,
> >>
> >> On Wed, Jan 18, 2012 at 2:17 PM, Stephen Warren wrote:
> >>> On 01/11/2012 09:32 PM, Simon Glass wrote:
> >>>
Hi Stephen,
On Mon, Jan 23, 2012 at 10:18 AM, Stephen Warren wrote:
> On 01/21/2012 10:08 AM, Simon Glass wrote:
>> Hi Stephen,
>>
>> On Wed, Jan 18, 2012 at 2:17 PM, Stephen Warren wrote:
>>> On 01/11/2012 09:32 PM, Simon Glass wrote:
This adds some support into fdtdec for reading GPIO def
Hi,
On Wed, Jan 11, 2012 at 8:32 PM, Simon Glass wrote:
> This series brings in the Linux kernel fdt file and provides a working
> USB driver for Tegra2 Seaboard.
>
> (I have done this in one series since otherwise most of the fdt additions
> will just look like dead code.)
>
> The driver require
On Tuesday 24 January 2012 16:35:00 Mike Frysinger wrote:
> On Monday 23 January 2012 01:20:16 Simon Glass wrote:
> > On Fri, Jan 20, 2012 at 10:59 AM, Mike Frysinger wrote:
> > > On Tuesday 10 January 2012 19:45:47 Simon Glass wrote:
> > >> --- /dev/null
> > >> +++ b/arch/sandbox/include/asm/gpio.
On Monday 23 January 2012 01:48:50 Simon Glass wrote:
> --- a/arch/sandbox/cpu/start.c
> +++ b/arch/sandbox/cpu/start.c
>
> int main(int argc, char *argv[])
> {
> + struct sandbox_state *state = NULL;
> + int err;
> +
> + err = state_init();
> + if (!err) {
> + state
Colin Cross wrote at Tuesday, January 24, 2012 3:33 PM:
> On Tue, Jan 24, 2012 at 2:08 PM, Stephen Warren wrote:
> > Peter De Schrijver wrote at Tuesday, January 24, 2012 2:53 AM:
> >> What about the peripheral resets which are also handled by CAR? Peripheral
> >> clock nodes also offer assert and
On Tue, Jan 24, 2012 at 2:08 PM, Stephen Warren wrote:
> Peter De Schrijver wrote at Tuesday, January 24, 2012 2:53 AM:
>> What about the peripheral resets which are also handled by CAR? Peripheral
>> clock nodes also offer assert and deassert methods for the reset signal
>> associated with them.
Peter De Schrijver wrote at Tuesday, January 24, 2012 2:53 AM:
> What about the peripheral resets which are also handled by CAR? Peripheral
> clock nodes also offer assert and deassert methods for the reset signal
> associated with them. Those methods are used when powergating domains for
> example
On Monday 23 January 2012 01:48:52 Simon Glass wrote:
> This provides a way for callers to create files for writing. We define
> flags which mirror the POSIX values.
there are no POSIX values, just names. the way the defines get interpreted is
left up to implementations.
> @@ -19,11 +24,7 @@
>
On Monday 23 January 2012 01:30:52 Simon Glass wrote:
> On Fri, Jan 20, 2012 at 11:05 AM, Mike Frysinger wrote:
> > i'm not sure how useful -c is since we can already do:
> > ./u-boot <<<"some command"
> >
> > each to their own i guess ...
>
> I had trouble getting that to work properly,
On Monday 23 January 2012 01:20:16 Simon Glass wrote:
> On Fri, Jan 20, 2012 at 10:59 AM, Mike Frysinger wrote:
> > On Tuesday 10 January 2012 19:45:47 Simon Glass wrote:
> >> --- /dev/null
> >> +++ b/arch/sandbox/include/asm/gpio.h
> >>
> >> +int sandbox_gpio_get_value(int gp);
> >
> > why bothe
On Monday 23 January 2012 00:30:32 Simon Glass wrote:
> On Fri, Jan 20, 2012 at 10:54 AM, Mike Frysinger wrote:
> > On Tuesday 10 January 2012 19:45:46 Simon Glass wrote:
> >> +#define CONFIG_LMB
> >
> > do we need this ?
>
> Without it I think bootm fails to build with FDT enabled.
looks like C
Signed-off-by: Vasily Khoruzhick
---
v2: mmcinfo is necessary to scan card for partitions
v3: replace mmcinfo with mmc rescan
v4: mmc rescan does not take extra argument in recent u-boot,
so remove it.
v5: remove spaces from CONFIG_BOOTCOMMAND
board/zipitz2/zipitz2.c |8
inclu
Signed-off-by: Vasily Khoruzhick
---
v2: remove usbtty stuff from EXTRA_ENV_SETTINGS
v3: shift+backspace should produce backspace code
v4: no change
v5: prettify CONFIG_PXA27X_MKP_KEYMAP
include/configs/zipitz2.h | 82 ++---
1 files changed, 77 insertion
From: Marek Vasut
Signed-off-by: Marek Vasut
Signed-off-by: Vasily Khoruzhick
---
v2: use struct-based access to regs, minor cleanup
v3: fix multiple keypresses handling, minor cleanup
v4: another minor cleanup
v5: fix indentation issues in scan_keys(), remove udelay,
increase PXA_KEYPAD_TI
Wolfgang,
On 01/25/2012 01:27 AM, Pali Rohár wrote:
> This patch series add support for new board Nokia RX-51 (aka N900).
> Last two patches adding on screen bootmenu support.
>
> This series supersedes the last sent version.
Just to let you know, I went through this submission off-list with Pal
On Tuesday 24 January 2012 08:03:20 Chander Kashyap wrote:
> --- a/include/configs/smdk5250.h
> +++ b/include/configs/smdk5250.h
>
> +#define CONFIG_NET_MULTI
dead define -> delete
> +#define CONFIG_ETHADDR "00:40:5c:26:0a:5b"
as Simon said, delete this too
-mike
signatur
On Tuesday 24 January 2012 11:18:22 Eric Nelson wrote:
> This patch allows a board configuration file to provide a default
> chip-select for serial flash so that first argument to the 'sf' command
> is optional.
>
> On boards that use the mxc_spi driver and a GPIO for chip select, this
> allows a
On Tue, Jan 24, 2012 at 10:02 AM, Peter Meerwald wrote:
> Hello,
>
> I can boot u-boot built from git commit
> b609009801b8a00644926f49b7d0d0cc0d3d8797 successfully, but it fails with
> git commit ee08a8260a3a7f6ef2001cfa3e7b6137b485f40a:
The current implementation (after poking some of the other
> > This moves keyboard polling logic from USB HCD drivers into USB
> > keyboard driver. Remove usb_event_poll() as keyboard polling was
> > the only user of this API. With this patch USB keyboard works with
> > EHCI controllers again. Tested on a tegra2 seaboard.
> >
> > Signed-off-by: Allen Ma
> > If CONSOLE_MUX is enabled, reevaluate console stdin when USB keyboard
> > device is detected.
> >
> > Signed-off-by: Allen Martin
>
> ping, anyone have any comments/feedback?
>
Hi, anyone want to give this patch some love so USB keyboard can work on EHCI
again?
-Allen
nvpublic
_
Hello,
I can boot u-boot built from git commit
b609009801b8a00644926f49b7d0d0cc0d3d8797 successfully, but it fails with
git commit ee08a8260a3a7f6ef2001cfa3e7b6137b485f40a:
Texas Instruments X-Loader 1.5.1 (Jan 24 2012 - 14:51:45)
Beagle xM
Reading boot sector
Loading u-boot.bin from mmc
for c
Dear Boban Petrovic,
In message
you wrote:
>
> I have specific need to boot my Pandaboard with an elf image. I noticed
> that in u-boot-2011.12 bootelf command is disabled by default in
> omap4_panda_config. I am wondering if there is a reason for not having
> bootelf command for Pandaboard. Tha
I have specific need to boot my Pandaboard with an elf image. I noticed
that in u-boot-2011.12 bootelf command is disabled by default in
omap4_panda_config. I am wondering if there is a reason for not having
bootelf command for Pandaboard. Thanks.
___
U-B
On 1/24/12, Eric Nelson wrote:
> This patch allows a board configuration file to provide a default
> chip-select for serial flash so that first argument to the 'sf' command
> is optional.
>
> On boards that use the mxc_spi driver and a GPIO for chip select, this
> allows
> a much simpler command l
When running Linux on a mx28evk and issuing a 'reboot'command the following
behaviour is observed:
root@freescale /$ reboot
starting pid 329, tty '': '/etc/rc.d/rcS stop'
root@freescale /$ Stopping inetd:
Hi Chander,
On Tue, Jan 24, 2012 at 5:03 AM, Chander Kashyap
wrote:
> This patch enable support for SMC911X based ethernet device.
>
> Signed-off-by: Chander Kashyap
> ---
> board/samsung/smdk5250/smdk5250.c | 89
> +
> include/configs/smdk5250.h |
The default settings store the persistent environment on SD card
and not serial flash (SPI NOR).
To use SPI NOR to save the environment instead of SD card, edit
include/configs/mx6qsabrelite.h and
- undefine CONFIG_ENV_IS_IN_MMC
- define CONFIG_ENV_IS_IN_SPI_FLASH
The SPI driver can take as ch
Signed-off-by: Eric Nelson
Acked-by: Dirk Behme
Acked-by: Stefano Babic
---
include/configs/mx6qsabrelite.h |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index 8dd6e39..e34f108 100644
--- a/include/con
Signed-off-by: Eric Nelson
Acked-by: Dirk Behme
Acked-by: Stefano Babic
---
board/freescale/mx6qsabrelite/imximage.cfg|2 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 25 +
include/configs/mx6qsabrelite.h |9 +
3 files changed,
This patch allows a board configuration file to provide a default
chip-select for serial flash so that first argument to the 'sf' command
is optional.
On boards that use the mxc_spi driver and a GPIO for chip select, this allows
a much simpler command line:
U-Boot> sf probe
instead of
This patch set refactors mxc_spi as described in
http://lists.denx.de/pipermail/u-boot/2010-March/068791.html
and requested in
http://lists.denx.de/pipermail/u-boot/2012-January/116023.html
in order to add support for the MX6Q in general and the mx6qsabrelite
specifically.
Patch 1 simpl
Signed-off-by: Eric Nelson
Acked-by: Dirk Behme
Acked-by: Stefano Babic
---
arch/arm/include/asm/arch-mx6/imx-regs.h | 44 ++
1 files changed, 44 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h
b/arch/arm/include/asm/arch-mx6/
Move (E)CSPI register declarations into the imx-regs.h files for each supported
CPU
Introduce two new macros to control conditional setup
MXC_CSPI - Used for processors with the Configurable Serial Peripheral
Interface (MX3x)
MXC_ECSPI - For processors with Enhanced Configurable... (MX
On 1/24/12, Matthias Fuchs wrote:
>> - One patch that touches the HW_DIGCTRL_SCRATCH register (this part is
>> what fixed the RAM size retrievel after a "reboot" in the kernel
> And what is this part? I was not aware of this issue. What exactly part
> of my patch fixes this issue?
I started remo
* console_cursor_fix - fix cursor position (check for out of screen)
* console_cursor_up, console_cursor_down, console_cursor_left,
console_cursor_right, console_cursor_set_position for change cursor position
* console_newline - added param to specify count of creating new lines
* console_pr
* default bootmenu entries:
NOLO kernel, internal eMMC memory, external SD card, u-boot boot order
* when keyboard slide is closed always boot NOLO kernel
* when keyborad slide is open in CONFIG_PREBOOT try load bootmenu.scr from
first FAT partition of internal eMMC memory (also known as
* If not defined CONFIG_MENUCMD do nothing
* If CONFIG_MENUKEY is 0 and was pressed any key run env "menu_cmd"
* If pressed key was CONFIG_MENUKEY run env "menu_cmd"
* If CONFIG_MENUKEY is not defined run env "menu_cmd" always
* CONFIG_MENUKEY working if defined CONFIG_MENUCMD and CONFIG_BOO
* if defined run env "premonitor" before Main Loop for Monitor Processing
Signed-off-by: Pali Rohár
---
Changes since original version:
- removed #ifdef CONFIG_PREMONITOR in main.c
common/env_common.c |3 +++
common/main.c |4
2 files changed, 7 insertions(+), 0 deletions
* Added some ANSI escape codes definitions in common.h
* Configuration is done via env variables bootmenu_delay and bootmenu_:
bootmenu_delay=
bootmenu_="="
(title and commands are separated by first char '=')
is delay in seconds of autobooting first entry
is boot menu en
* This patch add support for move cursor and reverse colors
via ANSI espace codes in cfb_console driver
* ANSI escape codes can be enabled/disabled via CONFIG_CFB_CONSOLE_ANSI
Signed-off-by: Pali Rohár
---
Changes since original version:
- Fixed commit message
drivers/video/cfb_console.
* Command can be enabled by CONFIG_CMD_CLEAR
* Added some ANSI escape codes definitions in common.h
Signed-off-by: Pali Rohár
Cc: Marcel Mol
---
Changes since original version:
- Renamed command clr to clear
- Use puts instead printf
- Move cursor to pos1,1
- Merged parts of patch
* Use correct buffer size, do not damage screen output
Signed-off-by: Pali Rohár
---
Changes since original version:
- Fixed commit message
drivers/video/cfb_console.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_c
* console_clear - clear full console framebuffer output
* console_clear_line - clear part of specified line (or full)
Signed-off-by: Pali Rohár
---
Changes since original version:
- Fixed commit message
drivers/video/cfb_console.c | 64 +++
1 files
This patch adapts the bootm command so that it can use an existing atags command
set up by a previous bootloader. If the environment variable "atagaddr" is
unset,
bootm behaves as normal. If "atagaddr" is set, bootm will use atags address from
environment variable and also append new boot args (if
* Ignore ANSI escape codes for moving cursor, which are generated by keyboard
Signed-off-by: Pali Rohár
---
Changes since original version:
- Fixed commit message
common/main.c | 51 +++
1 files changed, 51 insertions(+), 0 deletions(-)
dif
* Code copied from linux kernel 3.0.0 from file include/linux/i2c/twl.h
Signed-off-by: Pali Rohár
---
Changes since original version:
- Fixed commit message
include/twl4030.h | 98 +
1 files changed, 98 insertions(+), 0 deletions(-)
diff
* Hide function save_boot_params if CONFIG_SPL_BUILD is not defined (function
do nothing)
* Same behaviour as in file arch/arm/cpu/armv7/omap4/lowlevel_init.S
* This allow to implement board specified function save_boot_params in board
code
Signed-off-by: Pali Rohár
---
Changes since original
1 - 100 of 117 matches
Mail list logo
