On Fri, Jul 20, 2012 at 09:59:14PM +0200, Simon Baatz wrote:
The hardware design of the IB-NAS62x0 causes the SATA activity
LEDs to be on when idle by default. Reverse the polarity of the
activity LEDs in early init.
Signed-off-by: Simon Baatz gmbno...@gmail.com
Cc: Luka Perkov
On Fri, Jul 20, 2012 at 09:59:15PM +0200, Simon Baatz wrote:
Support for the IB-NAS62x0 was added to the Linux mainline kernel
as of 3.5-rc1 using flattened devicetree. Change the config for
this board accordingly.
Signed-off-by: Simon Baatz gmbno...@gmail.com
Cc: Luka Perkov
Hi, everyone
I wish to know the file format of u-boot.bin.
Can you explain the file format of u-boot.bin?
Thanks in advance.
Best Regards,
J.Hwan Kim
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
From: Zhong Hongbo bocui...@gmail.com
all the patitions should depend CONFIG_PARTITIONS, no the
CONFIG_CMD_$(device). The device symbol may be SATA, SCSI,
USB, MMC, SYSTEMACE. Or else when the filesystem command be
enabled, But board's configure file can not include any
CONFIG_CMD_$(device), The
Hi Gerald and Luka,
On Sat, Jul 21, 2012 at 10:30:48AM +0200, DrEagle wrote:
Hi Simon and Luka,
Le 21/07/2012 10:03, Luka Perkov a écrit :
On Fri, Jul 20, 2012 at 09:59:15PM +0200, Simon Baatz wrote:
-#define CONFIG_MACH_TYPE MACH_TYPE_NAS6210
+#define CONFIG_OF_LIBFDT
Do we need
Hi Simon,
On Sat, Jul 21, 2012 at 11:40:15AM +0200, Simon Baatz wrote:
On Sat, Jul 21, 2012 at 10:30:48AM +0200, DrEagle wrote:
Hi Simon and Luka,
Le 21/07/2012 10:03, Luka Perkov a écrit :
On Fri, Jul 20, 2012 at 09:59:15PM +0200, Simon Baatz wrote:
-#define CONFIG_MACH_TYPE
Hi Andy,
On Fri, Jul 20, 2012 at 07:35:30AM, Duan Fugang-B38611 wrote:
The changes is reasonable. Thanks!
Best Regards,
Andy
The change for MII_MODE is clear.
As to FCE, this can be discussed, and it depends on the hardware support.
Actually, fec_open enables full-duplex in TCR regardless
Dear Wolfgang Denk,
Dear Graeme Russ,
In message CALButCJAu4r8wdTpYC7XPfhq_uJFbhQpGUeiNnEx-
jhjjk1...@mail.gmail.com you wrote:
Currently the lack of any reaction whatsoever was identified to be a
very discouraging sign for contributors. One thing we could do is to
declare a soft
Dear Graeme Russ,
Hi Scott,
On 07/21/2012 07:40 AM, Scott Wood wrote:
On 07/20/2012 04:34 PM, Graeme Russ wrote:
Hi Kim Marek,
On 07/21/2012 07:09 AM, Marek Vasut wrote:
Dear Kim Phillips,
On Mon, 16 Jul 2012 23:30:49 +0200
Detlev Zundel d...@denx.de wrote:
as
Dear Graeme Russ,
[...]
Maybe it's time to seriously look at a gerrit + jenkins based solution?
I am not sure that gerrit will solve any of the problems we have.
I may be missing it, but for example I don't see any integration into
a mostly e-mail based work flow. From what I have
Dear J.Hwan Kim,
Hi, everyone
I wish to know the file format of u-boot.bin.
Can you explain the file format of u-boot.bin?
Depends on the architecture, but usually an objcopy-ed raw binary.
Thanks in advance.
Best Regards,
J.Hwan Kim
Best regards,
Marek Vasut
This stuff has been rotting in the tree for a year now. Remove it.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Wolfgang Denk w...@denx.de
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: U-Boot DM u-boot...@lists.denx.de
---
arch/arm/cpu/arm720t/cpu.c |2 +-
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Wolfgang Denk w...@denx.de
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: U-Boot DM u-boot...@lists.denx.de
Cc: Tom Rini tr...@ti.com
---
arch/arm/cpu/armv7/omap-common/Makefile |3 ---
drivers/gpio/Makefile
This stuff has been rotting in the tree for a year now. Remove it.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Wolfgang Denk w...@denx.de
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: U-Boot DM u-boot...@lists.denx.de
Cc: Curt Brune c...@cucy.com
---
CREDITS
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Oliver Brown obr...@adventnetworks.com
Cc: Wolfgang Denk w...@denx.de
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: U-Boot DM u-boot...@lists.denx.de
---
arch/arm/cpu/arm1176/tnetv107x/Makefile |2 +-
Signed-off-by: Marek Vasut ma...@denx.de
Cc: David Müller d.muel...@elsoft.ch
Cc: Minkyu Kang mk7.k...@samsung.com
Cc: Wolfgang Denk w...@denx.de
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: U-Boot DM u-boot...@lists.denx.de
---
arch/arm/cpu/armv7/s5p-common/Makefile
This fixes the breakage with SPL on most OMAP boards after the GPIO
driver was moved.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Wolfgang Denk w...@denx.de
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: U-Boot DM u-boot...@lists.denx.de
Cc: Tom Rini tr...@ti.com
---
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Simon Glass s...@chromium.org
Cc: Tom Warren twar...@nvidia.com
Cc: Wolfgang Denk w...@denx.de
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: U-Boot DM u-boot...@lists.denx.de
---
arch/arm/cpu/armv7/tegra2/usb.c |7 ---
1 file changed, 4
Signed-off-by: Marek Vasut ma...@denx.de
Cc: David Müller d.muel...@elsoft.ch
Cc: Minkyu Kang mk7.k...@samsung.com
Cc: Wolfgang Denk w...@denx.de
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: U-Boot DM u-boot...@lists.denx.de
---
arch/arm/cpu/arm920t/s3c24x0/Makefile |3 -
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Bryan Hundven bryanhund...@gmail.com
Cc: Michael Schwingen rincew...@discworld.dascon.de
Cc: Wolfgang Denk w...@denx.de
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: U-Boot DM u-boot...@lists.denx.de
Cc: Joe Hershberger joe.hershber...@ni.com
---
Scott Wood scottw...@freescale.com wrote on 2012/07/20 23:11:33:
On 07/20/2012 04:20 AM, Joakim Tjernlund wrote:
PowerPC mandates SP to be 16 bytes aligned.
Furthermore, a stack frame is added, pointing to the reset vector
which is just get in the way when gdb is walking the stack because
Scott Wood scottw...@freescale.com wrote on 2012/07/20 23:12:49:
From: Scott Wood scottw...@freescale.com
To: Joakim Tjernlund joakim.tjernl...@transmode.se,
Cc: u-boot@lists.denx.de
Date: 2012/07/20 23:12
Subject: Re: [U-Boot] [PATCH 1/2] powerpc: Stack Pointer must be 16 aligned
On
On Friday 20 July 2012 17:11:33 Marek Vasut wrote:
Dear Mike Frysinger,
On Friday 20 July 2012 07:33:49 Marek Vasut wrote:
Dear Mike Frysinger,
On Wednesday 04 July 2012 10:39:20 Marek Vasut wrote:
Putting there the __func__ name would improve structure and speed
up finding
Dear Mike Frysinger,
On Friday 20 July 2012 17:11:33 Marek Vasut wrote:
Dear Mike Frysinger,
On Friday 20 July 2012 07:33:49 Marek Vasut wrote:
Dear Mike Frysinger,
On Wednesday 04 July 2012 10:39:20 Marek Vasut wrote:
Putting there the __func__ name would improve
On Friday 20 July 2012 17:50:33 Tom Rini wrote:
On 07/20/2012 02:47 PM, Mike Frysinger wrote:
On Friday 20 July 2012 07:31:47 Marek Vasut wrote:
Dear Mike Frysinger,
On Saturday 07 July 2012 23:08:14 Marek Vasut wrote:
+/* DEFINE_CACHE_ALIGN_BUFFER() is similar to
Acked-by: Mike Frysinger vap...@gentoo.org
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
From: Gerlando Falauto gerlando.fala...@keymile.com
SPI flash operations inadvertently stretching beyond the flash size will
result in a wraparound. This may be particularly dangerous when burning
u-boot, because the flash contents will be corrupted rendering the board
unusable, without any
On Monday 09 July 2012 14:53:20 Mikhail Kshevetskiy wrote:
current code does not support spi flashes that have 0x90 read_id command,
so fix this
and what SPI flashes exactly is this ? 0x9f is the JEDEC read idcode command
and is not SPI flash specific, so you're adding a lot of code that is
Hi,
Am Dienstag 10 Juli 2012, 09:31:42 schrieb Wolfgang Denk:
Hi everybody,
this is to let you know that the v2012.07-rc1 prerelease is out.
Please help testing, so we can fix the remaining issues before the
release, which I decided to shift by a week, i. e. the new schedule
for the
Dear Otavio Salvador,
On Sat, Jul 21, 2012 at 12:02 PM, Marek Vasut ma...@denx.de wrote:
This fixes the breakage with SPL on most OMAP boards after the GPIO
driver was moved.
It seems logical this to be merged on the GPIO move patch. Any reason
to not do that?
This is rather a fix,
On Sat, Jul 21, 2012 at 2:50 PM, Marek Vasut ma...@denx.de wrote:
Dear Otavio Salvador,
On Sat, Jul 21, 2012 at 12:02 PM, Marek Vasut ma...@denx.de wrote:
This fixes the breakage with SPL on most OMAP boards after the GPIO
driver was moved.
It seems logical this to be merged on the GPIO
On Monday 09 July 2012 14:53:21 Mikhail Kshevetskiy wrote:
Current SST driver does not support well this types of flash, so
introduce a new one.
This code is a combination of sst.c driver from u-boot and sst25l.c
driver from linux-3.3 release. I try to make a code as close to linux
driver
On Thursday 05 April 2012 01:29:18 Mike Frysinger wrote:
If we attempt to probe beyond the end of flash, MEMGETBADBLOCK will fail
(as well it should), but we end up erroring out with the distracting:
Cannot read bad block mark: Invalid argument
Instead of the correct error:
Too
Dear Otavio Salvador,
On Sat, Jul 21, 2012 at 2:50 PM, Marek Vasut ma...@denx.de wrote:
Dear Otavio Salvador,
On Sat, Jul 21, 2012 at 12:02 PM, Marek Vasut ma...@denx.de wrote:
This fixes the breakage with SPL on most OMAP boards after the GPIO
driver was moved.
It seems
On Sat, Jul 21, 2012 at 2:58 PM, Marek Vasut ma...@denx.de wrote:
On Sat, Jul 21, 2012 at 2:50 PM, Marek Vasut ma...@denx.de wrote:
Dear Otavio Salvador,
On Sat, Jul 21, 2012 at 12:02 PM, Marek Vasut ma...@denx.de wrote:
This fixes the breakage with SPL on most OMAP boards after the GPIO
Hi,
Am Dienstag 10 Juli 2012, 09:31:42 schrieb Wolfgang Denk:
Hi everybody,
this is to let you know that the v2012.07-rc1 prerelease is out.
Please help testing, so we can fix the remaining issues before the
release, which I decided to shift by a week, i. e. the new schedule
Hi Simon and Luka,
Le 21/07/2012 10:03, Luka Perkov a écrit :
On Fri, Jul 20, 2012 at 09:59:15PM +0200, Simon Baatz wrote:
Support for the IB-NAS62x0 was added to the Linux mainline kernel
as of 3.5-rc1 using flattened devicetree. Change the config for
this board accordingly.
On Fri, 20 Jul 2012 23:08:55 +0200, Albert ARIBAUD albert.u.b...@aribaud.net
wrote:
Hi Wolfgang,
The following changes since commit a21c65115bd95572cc80092a31b0e9ecb8710e9f:
Please ignore this pull request. Sending #3 right now.
Amicalement,
--
Albert.
Hi Wolfgang,
The following changes since commit a21c65115bd95572cc80092a31b0e9ecb8710e9f:
ARM: lib: Remove CONFIG_ARCH_CPU_INIT dependency (2012-07-20 14:24:08 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to
Dear Stefano Babic,
In message 1342774802-13976-1-git-send-email-sba...@denx.de you wrote:
An empty flush_dcache_range() was added into MPC85xx to
work with drivers shared with other architecture.
However, it is compiled only if USB is set, but it is required
for other drivers (FSL_ESDHC),
Dear Markus Hubig,
In message 20120720142655.gb20...@imko.de you wrote:
And the only setting I found in my board support code (stamp9g20.h)
that is obviously realated to this malloc-thing is:
| #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE \
|
Dear Albert ARIBAUD,
In message 20120721232829.1fd76f12@lilith you wrote:
Hi Wolfgang,
The following changes since commit a21c65115bd95572cc80092a31b0e9ecb8710e9f:
ARM: lib: Remove CONFIG_ARCH_CPU_INIT dependency (2012-07-20 14:24:08 +02=
00)
are available in the git repository at:
Hello,
I just recently got the following issues when building Sparc platforms with
debian gcc 4.7.1-5. Peter, you seems to be involved, can you please check on
these?
Configuring for grsim_leon2 board...
textdata bss dec hex filename
9553033282640 101498 18c7a
43 matches
Mail list logo
