Hi,
I think we can wait some more time to mature the fdt support on
u-boot, as not many boards were using this future.
may be I am also incorrect.
And need to remove the CONFIG_ARCH_DEVICE_TREE references in
dts/Makefile to for working this.
--
Thanks,
Jagan.
On Tue, Jun 11, 2013 at 4:47 AM,
Am 2013-04-10 18:13, schrieb Joe Hershberger:
Hi Michael,
On Wed, Apr 10, 2013 at 5:07 AM, Michael Walle mich...@walle.cc
wrote:
On Wed, April 10, 2013 03:51, Joe Hershberger wrote:
Hi Michael,
I just tested this on my Zynq target and it worked. However, you
make
a good point that it is
On 10.06.2013 16:51, Gabbasov, Andrew wrote:
Hi Dirk,
From: Behme, Dirk - Bosch
Sent: Monday, June 10, 2013 16:06
To: Gabbasov, Andrew
Cc: u-boot@lists.denx.de; Stefano Babic; Fleming Andy-AFLEMING
Subject: Re: [U-Boot] [Patch] fsl_esdhc: Fix DMA
Hi Rob,
On Tue, 21 May 2013 16:33:44 -0500, Rob Herring robherri...@gmail.com
wrote:
From: Rob Herring rob.herr...@calxeda.com
Compile misc_init_r only if CONFIG_MISC_INIT_R is enabled.
Signed-off-by: Rob Herring rob.herr...@calxeda.com
---
board/highbank/highbank.c | 2 ++
1 file
Hi Sascha,
On Mon, 27 May 2013 11:42:26 +0200, Sascha Silbe
t-ub...@infra-silbe.de wrote:
U-Boot has become slightly larger than where the environment sector
was previously located. Saving the environment would brick the device.
Relocate the environment to where it is with the stock (i.e.
Add a Makefile target ('checkarmreloc') which
fails if the ELF binary contains relocation records
of types other than R_ARM_RELATIVE.
Signed-off-by: Albert ARIBAUD albert.u.b...@aribaud.net
---
Changes in v3:
- fix commit message typo (of - if)
Changes in v2:
- use $ instead of $(obj)u-boot
This series optimizes relocation by ensuring ARM
binaries only use one type of relocation record,
R_ARM_RELATIVE., then optimizing relocation code
accordingly.
1. A Makefile rule is added that checks that no
other relocation record types are generated except
R_ARM_RELATIVE; build fails if this is
File arch/arm/lib/bss.c was initially defined for BSS only,
but is now going to also contain definitions for other
section-boundary-related symbols, so rename it for better
accuracy.
Also, remove useless 'used' attributes.
Signed-off-by: Albert ARIBAUD albert.u.b...@aribaud.net
---
Changes in
Use section symbols directly
Drop support for R_ARM_ABS32 record types
Eliminate unneeded intermediate registers
Optimize relocation table iteration
Signed-off-by: Albert ARIBAUD albert.u.b...@aribaud.net
---
Changes in v3: None
Changes in v2: None
arch/arm/lib/relocate.S | 32
Discard all .dynsym sections from linker scripts
Remove all __dynsym_start definitions from linker scripts
Remove all __dynsym_start references from the codebase
Note: this touches include/asm-generic/sections.h, which
is not ARM-specific, but actual uses of __dynsym_start
are only in ARM, so
This change is only done where needed: some linker
scripts may contain relocation symbols yet remain
unchanged.
__rel_dyn_start and __rel_dyn_end each requires
its own output section; putting them in relocation
sections changes their flags and breaks relocation.
Signed-off-by: Albert ARIBAUD
This change is only done where needed: some linker
scripts may contain __image_copy_{start,end} yet
remain unchanged.
Also, __image_copy_end needs its own section; putting
it in relocation sections changes their flags and makes
relocation break.
Signed-off-by: Albert ARIBAUD
Hi Albert,
On Tue, 11 Jun 2013 14:17:29 +0200, Albert ARIBAUD
albert.u.b...@aribaud.net wrote:
This series optimizes relocation by ensuring ARM
binaries only use one type of relocation record,
R_ARM_RELATIVE., then optimizing relocation code
accordingly.
This is a cosmetic version only; if
From: Dirk Eibach eib...@gdsys.de
CONFIG_SYS_FLASH_PROTECTION was active on most gdsys boards by default,
while hardware flash protection was not implemented.
Hardware support was added recently and we get into trouble because backward
compatibility is broken (u-boot can't unprotect the protected
From: Dirk Eibach dirk.eib...@gdsys.cc
Signed-off-by: Dirk Eibach dirk.eib...@gdsys.cc
Signed-off-by: Dirk Eibach dirk.eib...@gdsys.cc
---
Changes in v3:
- adapt to powerpc/ppc4xx: Use generic accessor functions for gdsys FPGA
- squashed with powerpc/ppc4xx: Fixup phy erratum on gdsys iocon
From: Dirk Eibach dirk.eib...@gdsys.cc
Signed-off-by: Dirk Eibach dirk.eib...@gdsys.cc
Signed-off-by: Dirk Eibach dirk.eib...@gdsys.cc
---
Changes in v3:
- adapt to powerpc/ppc4xx: Use generic accessor functions for gdsys FPGA
Changes in v2:
- move cmd_fpgad to common and fix whitespace issues
From: Dirk Eibach eib...@gdsys.de
OSD size was constant 32x16 characters.
Now the size is set as announced by the FPGA.
Signed-off-by: Dirk Eibach dirk.eib...@gdsys.cc
---
Changes in v3: None
Changes in v2: None
board/gdsys/common/osd.c | 34 ++
1 file changed,
From: Dirk Eibach eib...@gdsys.de
A set of accessor functions was added to be able to access not only
memory mapped FPGA in a generic way.
Thanks to Wolfgang Denk for getting this sorted properly.
Signed-off-by: Dirk Eibach dirk.eib...@gdsys.cc
Signed-off-by: Dirk Eibach dirk.eib...@gdsys.cc
From: Dirk Eibach eib...@gdsys.de
mclink is a serial interface for communication between gdsys FPGA.
Signed-off-by: Dirk Eibach dirk.eib...@gdsys.cc
Signed-off-by: Dirk Eibach dirk.eib...@gdsys.cc
---
Changes in v3:
- adapt to powerpc/ppc4xx: Use generic accessor functions for gdsys FPGA
-
From: Dirk Eibach dirk.eib...@gdsys.cc
This series depends on the Bring in new I2C framework series by Heiko
Schocher.
Patch powerpc/ppc4xx: Add bitbang i2c interface for gdsys boards was dropped
in
favor of using the new framework.
Changes in v3:
- adapt to powerpc/ppc4xx: Use generic
Hi Albert,
On 11/06/13 15:47, Albert ARIBAUD wrote:
Hi Albert,
On Tue, 11 Jun 2013 14:17:29 +0200, Albert ARIBAUD
albert.u.b...@aribaud.net wrote:
This series optimizes relocation by ensuring ARM
binaries only use one type of relocation record,
R_ARM_RELATIVE., then optimizing
Hi,
On Fri, Jun 7, 2013 at 4:56 AM, Inderpal Singh inderpal.si...@linaro.orgwrote:
Not all boards based on exynos5250 have SPI flash, same serial port and
might
not require display and the same lds script. Hence move them to board
specific
config file.
At least for the serial port this
On Sat, Jun 08, 2013 at 11:21:19PM +0200, Daniel Schwierzeck wrote:
Hi Tom,
please pull two fixes for MIPS. These patches and [1] are required to
cleanly run 'MAKEALL -a mips' again on master.
[1] http://patchwork.ozlabs.org/patch/249980/
The following changes since commit
On Tue, Jun 11, 2013 at 6:57 AM, Axel Lin axel@ingics.com wrote:
Signed-off-by: Axel Lin axel@ingics.com
Reviewed-by: Simon Glass s...@chromium.org
---
drivers/spi/armada100_spi.c | 11 ++-
1 file changed, 2 insertions(+), 9 deletions(-)
diff --git
Signed-off-by: Axel Lin axel@ingics.com
---
drivers/spi/armada100_spi.c | 11 ++-
1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/drivers/spi/armada100_spi.c b/drivers/spi/armada100_spi.c
index afdbe05..b237c7c 100644
--- a/drivers/spi/armada100_spi.c
+++
Hi Dirk,
From: Behme, Dirk - Bosch
Sent: Tuesday, June 11, 2013 12:16
To: Gabbasov, Andrew
Cc: u-boot@lists.denx.de; Stefano Babic; Fleming Andy-AFLEMING
Subject: Re: [U-Boot] [Patch] fsl_esdhc: Fix DMA transfer completion waiting
loop
On
Hi Lubomir,
On Tue, 11 Jun 2013 17:22:17 +0300, Lubomir Popov lpo...@mm-sol.com
wrote:
Hi Albert,
Applied the series to a relatively fresh (yesterday's) u-boot-ti/master
and tested on a custom OMAP5430 board. Boots normally. USB storage and
Ethernet (dhcp ping), SD/MMC, I2C are all
Hi Simon,
On Tue, Jun 11, 2013 at 3:19 AM, Simon Glass s...@chromium.org wrote:
On Mon, Jun 10, 2013 at 9:05 AM, Jagan Teki jagannadh.t...@gmail.com
wrote:
Hi Tom,
On Sat, Jun 8, 2013 at 8:24 PM, Jagan Teki jagannadh.t...@gmail.com
wrote:
Hi Simon,
On Sat, Jun 8, 2013 at 8:11 PM,
After waiting for the command completion event, the interrupt status
bits, that occured to be set by that time, are cleared by writing them
back. It is supposed, that it should be command related bits (command
complete and may be command errors).
However, in some cases the DMA already completes
Hi Kuo-Jung,
On Tue, 11 Jun 2013 11:09:57 +0800, Kuo-Jung Su dant...@gmail.com
wrote:
2013/6/11 Albert ARIBAUD albert.u.b...@aribaud.net:
Hi Kuo-Jung,
On Tue, 7 May 2013 14:25:07 +0800, Kuo-Jung Su dant...@gmail.com
wrote:
diff --git a/arch/arm/include/asm/dma-mapping.h
On Thu, Jun 06, 2013 at 01:30:05PM -0500, Dan Murphy wrote:
Update the EXTRA_ENV_SETTING for the dra7xx.
The console needs to be set to ttyO0 and the
findfdt needs to be updated to load the
dra7xx-evm.dtb file.
Signed-off-by: Dan Murphy dmur...@ti.com
[snip]
- setenv
On Thu, Jun 06, 2013 at 01:27:06PM -0500, Dan Murphy wrote:
In the omap4, omap5 and am335x common files add a check to ensure that
the fdtfile is defined after the findfdt macro has run. If the file
is not defined then warn the user that the dtb file is not defined.
Signed-off-by: Dan
On Thu, Jun 06, 2013 at 04:30:38PM -0500, Dan Murphy wrote:
Correct the console sys prompt to display the correct processor
and the corrent board
Signed-off-by: Dan Murphy dmur...@ti.com
Reported-by: Lubomir Popov lpo...@mm-sol.com
Reviewed-by: Tom Rini tr...@ti.com
But personally, this
Hi Jagan,
On Tue, Jun 11, 2013 at 8:31 AM, Jagan Teki jagannadh.t...@gmail.comwrote:
Hi Simon,
On Tue, Jun 11, 2013 at 3:19 AM, Simon Glass s...@chromium.org wrote:
On Mon, Jun 10, 2013 at 9:05 AM, Jagan Teki jagannadh.t...@gmail.com
wrote:
Hi Tom,
On Sat, Jun 8, 2013 at 8:24 PM,
On 06/11/2013 12:52 AM, Jagan Teki wrote:
Hi,
I think we can wait some more time to mature the fdt support on
u-boot, as not many boards were using this future.
may be I am also incorrect.
Sorry, I don't understand what this means.
And need to remove the CONFIG_ARCH_DEVICE_TREE references
Signed-off-by: Gabor Juhos juh...@openwrt.org
Cc: Daniel Schwierzeck daniel.schwierz...@gmail.com
---
arch/mips/cpu/mips64/start.S |6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/mips/cpu/mips64/start.S b/arch/mips/cpu/mips64/start.S
index dc7ce07..1ece6c2 100644
On Mon, Jun 10, 2013 at 02:49:35PM -0700, Simon Glass wrote:
On Mon, Jun 10, 2013 at 9:05 AM, Jagan Teki jagannadh.t...@gmail.comwrote:
Hi Tom,
On Sat, Jun 8, 2013 at 8:24 PM, Jagan Teki jagannadh.t...@gmail.com
wrote:
Hi Simon,
On Sat, Jun 8, 2013 at 8:11 PM, Simon Glass
On 06/11/2013 10:50 AM, Tom Rini wrote:
On Thu, Jun 06, 2013 at 01:30:05PM -0500, Dan Murphy wrote:
Update the EXTRA_ENV_SETTING for the dra7xx.
The console needs to be set to ttyO0 and the
findfdt needs to be updated to load the
dra7xx-evm.dtb file.
Signed-off-by: Dan Murphy
Hi Simon,
On Tue, Jun 11, 2013 at 9:26 PM, Simon Glass s...@chromium.org wrote:
Hi Jagan,
On Tue, Jun 11, 2013 at 8:31 AM, Jagan Teki jagannadh.t...@gmail.com
wrote:
Hi Simon,
On Tue, Jun 11, 2013 at 3:19 AM, Simon Glass s...@chromium.org wrote:
On Mon, Jun 10, 2013 at 9:05 AM, Jagan
On Mon, Jun 10, 2013 at 05:16:56PM -0600, Stephen Warren wrote:
From: Stephen Warren swar...@nvidia.com
This is a series of patches which simplifies the rules to build *.dts in
U-Boot by relying on features in the latest dtc. The include rules are
made more consistent between cpp (when
Update the EXTRA_ENV_SETTING for the dra7xx.
The console needs to be set to ttyO0 and the
findfdt needs to be updated to load the
dra7xx-evm.dtb file.
Signed-off-by: Dan Murphy dmur...@ti.com
---
v5 - Fixed by adding the \0 to terminate the macro -
http://patchwork.ozlabs.org/patch/249528/
v4 -
On 06/11/2013 10:19 AM, Tom Rini wrote:
On Mon, Jun 10, 2013 at 05:16:56PM -0600, Stephen Warren wrote:
From: Stephen Warren swar...@nvidia.com
This is a series of patches which simplifies the rules to build
*.dts in U-Boot by relying on features in the latest dtc. The
include rules are
Hi,
On Tue, Jun 11, 2013 at 9:19 AM, Jagan Teki jagannadh.t...@gmail.comwrote:
Hi Simon,
On Tue, Jun 11, 2013 at 9:26 PM, Simon Glass s...@chromium.org wrote:
Hi Jagan,
On Tue, Jun 11, 2013 at 8:31 AM, Jagan Teki jagannadh.t...@gmail.com
wrote:
Hi Simon,
On Tue, Jun 11, 2013
2013/6/11 Gabor Juhos juh...@openwrt.org:
Signed-off-by: Gabor Juhos juh...@openwrt.org
Cc: Daniel Schwierzeck daniel.schwierz...@gmail.com
---
arch/mips/cpu/mips64/start.S |6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/mips/cpu/mips64/start.S
Hi Tom,
On Tue, Jun 11, 2013 at 9:46 PM, Tom Rini tr...@ti.com wrote:
On Mon, Jun 10, 2013 at 02:49:35PM -0700, Simon Glass wrote:
On Mon, Jun 10, 2013 at 9:05 AM, Jagan Teki jagannadh.t...@gmail.comwrote:
Hi Tom,
On Sat, Jun 8, 2013 at 8:24 PM, Jagan Teki jagannadh.t...@gmail.com
On 06/09/2013 05:24:05 AM, Chunhe Lan wrote:
+ /* W**G* - Flash, localbus */
+ /* This will be changed to *I*G* after relocation to RAM. */
+ SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE,
CONFIG_SYS_FLASH_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+
This series adds a tracing feature to U-Boot which is useful for
profiling boot time and other purposes.
The core trace library relies on standard gcc function instrumentation
and a microsecond timer which should work correctly on almost any
architecture. Generic board is used to avoid the need
Enabling FIT produces a compile error. Fix this.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
- Add new patch to fix FIT compile error for x86
arch/x86/lib/bootm.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/x86/lib/bootm.c b/arch/x86/lib/bootm.c
index
It is difficult to automatically test tracing on most architectures, but
with sandbox it is easy enough to do a simple sanity check.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
- Add notification that the trace test has passed
test/trace/test-trace.sh | 89
I am not sure of the meaning of extern inline, but this gives errors
when building with function instrumenting enabled. Change these functions
to static inline.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
- Add new patch to convert PCI inline functions to static inline
Add a library which supports tracing of execution using built-in gcc
features and a microsecond timer. This can be used to record a list of
function which are executed, along with a timestamp for each. Later
this information can be sent to the host for processing.
Signed-off-by: Simon Glass
For some reason this does not normally cause a compiler warning, but the code
seems to be incorrect. Add the missing return.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
- Add new patch to fix compiler warning in do_mem_loop()
common/cmd_mem.c | 2 ++
1 file changed, 2
Add a trace command with sub-commands to start/stop tracing, print out
statistics and dump trace information to memory for later upload to a host.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
- Add cast to clarfy argument type on sandbox and x86
common/Makefile| 1 +
Add configs to enable tracing when it is needed.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
- Add new patch to enable tracing on coreboot
include/configs/coreboot.h | 7 +++
1 file changed, 7 insertions(+)
diff --git a/include/configs/coreboot.h
When this test fails it is useful to see the output from U-Boot. Add
printing of this information on failure.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2: None
test/image/test-fit.py | 19 ++-
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git
The unstash code is a bit loose with its printf() types, which gives
warnings on sandbox. Correct this.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
- Fix tag to use : instead of ;
common/bootstage.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git
At present the bootm code is mostly duplicated for the plain 'bootm'
command and its sub-command variant. This makes the code harder to
maintain and means that changes must be made to several places.
Introduce do_bootm_states() which performs selected portions of the bootm
work, so that both
Implement this feature on ARM for tracing.
It would be nice to have generic bootm support so that it is easily
implemented on any arch.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2: None
arch/arm/lib/bootm.c | 33 +
1 file changed, 21
For tracing to work it has to be able to access the microsecond timer
without causing a recursive call to the function entry/exit handlers.
Add attributes to the relevant functions to support this.
Signed-off-by: Simon Glass s...@chromium.org
Signed-off-by: Simon Glass s...@chromium.org
---
Move bootstage's numbering printing code into a generic place so that it can
be used by tracing also.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2: None
common/bootstage.c | 22 --
include/vsprintf.h | 11 +++
lib/vsprintf.c | 16
Support tracing on sandbox by adding suitable CONFIG options. To enable it,
compile U-Boot with FTRACE=1.
The timer functions are marked to skip tracing, since these are called from
the tracing code itself, and we want to avoid an infinite loop.
Signed-off-by: Simon Glass s...@chromium.org
---
This tool provides the facility to decode U-Boot trace data and write out
a text file in Linux ftrace format for use with pytimechart.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2: None
Makefile | 3 +-
tools/.gitignore | 1 +
tools/Makefile | 6 +
For tracing it is useful to run as much of U-Boot as possible so as to get
a complete picture. Quite a bit of work happens in bootm, and we don't want
to have to stop tracing before bootm starts.
Add a way of doing a 'fake' boot of the OS - which does everything up to
the point where U-Boot is
Add tracing to Exynos5 boards, so that tracing can be enabled when building
with 'make FTRACE=1'. We use a 16MB trace buffer.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
- Add new patch to enable tracing on Exynos5
include/configs/exynos5250-dt.h | 8
1 file
Some changes are needed to x86 timer functions to support tracing. Add
these so that the feature works correctly.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
- Add new patch to support tracing on x86
arch/x86/include/asm/global_data.h | 2 +-
arch/x86/include/asm/msr.h
Add hooks for tracing to generic board, including:
- allow early tracing to start early as possible in U-Boot
- reserve memory for trace buffer
- copy early trace buffer to main trace buffer after relocation
- setup full tracing support after relocation
Signed-off-by: Simon Glass
Use -finstrument-functions when tracing is enabled (make FTRACE=1).
Tracing is not currently supported by SPL even if sufficient memory is
available.
When tracing is enabled, we #define FTRACE. This can be used by
board config files to conditionally enable the tracing options.
Signed-off-by:
At present the arguments to bootm are processed in a somewhat confusing
way. Sub-functions must know how many arguments their calling functions
have processed, and the OS boot function must also have this information.
Also it isn't obvious that 'bootm' and 'bootm start' provide arguments in
the
Add support for Numonyx N25Q1024A SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v3:
- none
Changes for v2:
- none
drivers/mtd/spi/stmicro.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/mtd/spi/stmicro.c
Defined bank addr code on CONFIG_SPI_FLASH_BAR macro, to reduce the
size for existing boards which has 16Mbytes SPI flashes.
It's upto user which has provision to use the bank addr code for
flashes which has 16Mbytes.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes
Read the flash bank addr register to get the state of bank in
a perticular flash. and also bank write happens only when there is
a change in bank selection from user.
bank read only valid for flashes which has 16Mbytes those are
opearted in 3-byte addr mode, each bank occupies 16Mytes.
Suppose
This patch provides support to read a flash extended address
register for winbond and stmicro SPI flashes.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v3:
- none
Changes for v2:
- none
drivers/mtd/spi/spi_flash.c | 2 ++
This patch updated the spi_flash read func to support all
sizes of flashes using bank reg addr facility.
The same support has been added in below patch for erase/write
spi_flash functions:
sf: Support all sizes of flashes using bank addr reg facility
(sha1:
This patch provides support to read a flash bank address register.
reading extended/bank address register will give whether the flash
is operated on extended/bank addressing or normal addressing in
3-byte address mode.
Currently added an extended/bank address register reading support
for
Updated the spi_flash framework to handle all sizes of flashes
using bank/extd addr reg facility
The current implementation in spi_flash supports 3-byte address mode
due to this up to 16Mbytes amount of flash is able to access for those
flashes which has an actual size of 16MB.
As most of the
Add support for Numonyx N25Q1024 SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v3:
- none
Changes for v2:
- none
drivers/mtd/spi/stmicro.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/mtd/spi/stmicro.c
This patch provides support to program a flash bank address
register.
extended/bank address register contains an information to access
the 4th byte addressing in 3-byte address mode.
Currently added an bank address register writing support for
spansion flashes.
reff' the spec for more details
There is no other call other than spi_flash_cmd_wait_ready(),
hence removed spi_flash_cmd_poll_bit and use the poll status code
spi_flash_cmd_wait_ready() itself.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v3:
- none
Changes for v2:
- none
Add support for Numonyx N25Q512A SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v3:
- none
Changes for v2:
- none
drivers/mtd/spi/stmicro.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/mtd/spi/stmicro.c
This series is v3 for the patch series sent few weeks back with a head
sf: Update sf framework to support all sizes of flashes
All patch are looks same for v2 and v3 but placed the bank addr code
on CONFIG_SPI_FLASH_BAR to reduce the sizes.
The current implementation in sf supports 3-byte
Initialized bank_sel variable to 0 to support the updated read
ops for flashes which has 16Mbytes.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v3:
- none
Changes for v2:
- none
drivers/mtd/spi/spi_flash.c | 2 +-
1 file changed, 1
Use the existing spi_flash_addr() for 3-byte addressing
cmd filling in write call.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v3:
- none
Changes for v2:
- none
drivers/mtd/spi/spi_flash.c | 7 ++-
1 file changed, 2 insertions(+), 5
Add support for Spansion S25FL512S_64K SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v3:
- Added 64K sector part
Changes for v2:
- none
drivers/mtd/spi/spansion.c | 7 +++
1 file changed, 7 insertions(+)
diff --git
Add support for Numonyx N25Q512 SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v3:
- none
Changes for v2:
- none
drivers/mtd/spi/stmicro.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/mtd/spi/stmicro.c
This patch provides support to program a flash extended address
register for winbond and stmicro SPI flashes.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v3:
- none
Changes for v2:
- none
drivers/mtd/spi/spi_flash.c | 2 ++
Flag status register polling is required for micron 512Mb flash
devices onwards, for performing erase/program operations.
Like polling for WIP(Write-In-Progress) bit in read status register,
spi_flash_cmd_wait_ready will poll for PEC(Program-Erase-Control)
bit in flag status register.
Dear dirk.eib...@gdsys.cc,
In message 1370959364-28943-2-git-send-email-dirk.eib...@gdsys.cc you wrote:
From: Dirk Eibach eib...@gdsys.de
A set of accessor functions was added to be able to access not only
memory mapped FPGA in a generic way.
Thanks to Wolfgang Denk for getting this
Hi Simon,
On Tue, 11 Jun 2013 11:14:49 -0700, Simon Glass s...@chromium.org
wrote:
Implement this feature on ARM for tracing.
It would be nice to have generic bootm support so that it is easily
implemented on any arch.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
Hi Albert,
On Tue, Jun 11, 2013 at 12:59 PM, Albert ARIBAUD
albert.u.b...@aribaud.netwrote:
Hi Simon,
On Tue, 11 Jun 2013 11:14:49 -0700, Simon Glass s...@chromium.org
wrote:
Implement this feature on ARM for tracing.
It would be nice to have generic bootm support so that it is easily
Dear Marek Vasut,
In message 1369018900-11198-1-git-send-email-ma...@denx.de you wrote:
The flash_info_t-start[] field is limited in size by
CONFIG_SYS_MAX_FLASH_SECT
macro, which is set to 19 for this board in the board config file. If we
inspect
the board/ppmc7xx/flash.c closely,
Hi Simon,
On Tue, 11 Jun 2013 13:02:56 -0700, Simon Glass s...@chromium.org
wrote:
Hi Albert,
On Tue, Jun 11, 2013 at 12:59 PM, Albert ARIBAUD
albert.u.b...@aribaud.netwrote:
Hi Simon,
On Tue, 11 Jun 2013 11:14:49 -0700, Simon Glass s...@chromium.org
wrote:
Implement this
From: Stephen Warren swar...@nvidia.com
Enhance the MMC core to calculate the size of each MMC partition, and
update mmc-capacity whenever a partition is selected. This causes:
mmc dev 0 1 ; mmcinfo
... to report the size of the currently selected partition, rather than
always reporting the
From: Stephen Warren swar...@nvidia.com
Describe the meaning of CONFIG_ENV_IS_IN_MMC, and all related defines that
must or can be set when using that option.
Signed-off-by: Stephen Warren swar...@nvidia.com
Reviewed-by: Peter Korsgaard jac...@sunsite.dk
Acked-by: Tom Rini tr...@ti.com
---
v3:
*
From: Stephen Warren swar...@nvidia.com
A negative value of CONFIG_ENV_OFFSET is treated as a backwards offset
from the end of the eMMC device/partition, rather than a forwards offset
from the start.
This is useful when a single board may be stuffed with different eMMC
devices, each of which has
From: Stephen Warren swar...@nvidia.com
Use a negative value of CONFIG_ENV_OFFSET for all NVIDIA reference boards
that store the U-Boot environment in the 2nd eMMC boot partition. This
makes U-Boot agnostic to the size of the eMMC boot partition, which can
vary depending on which eMMC device was
Hi Albert,
On Tue, Jun 11, 2013 at 1:21 PM, Albert ARIBAUD
albert.u.b...@aribaud.netwrote:
Hi Simon,
On Tue, 11 Jun 2013 13:02:56 -0700, Simon Glass s...@chromium.org
wrote:
Hi Albert,
On Tue, Jun 11, 2013 at 12:59 PM, Albert ARIBAUD
albert.u.b...@aribaud.netwrote:
Hi Simon,
Dear Tom,
The following changes since commit e1208c2fe5e07f9a248cfbf9bbb212aa34ad2806:
MIPS: asm/errno.h: switch to asm-generic/errno.h (2013-06-08 23:10:10 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-74xx-7xx master
for you to fetch changes up to
Dear Tom,
The following changes since commit e1208c2fe5e07f9a248cfbf9bbb212aa34ad2806:
MIPS: asm/errno.h: switch to asm-generic/errno.h (2013-06-08 23:10:10 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-mpc82xx master
for you to fetch changes up to
Hi Simon,
On Tue, 11 Jun 2013 14:17:42 -0700, Simon Glass s...@chromium.org
wrote:
Hi Albert,
On Tue, Jun 11, 2013 at 1:21 PM, Albert ARIBAUD
albert.u.b...@aribaud.netwrote:
Hi Simon,
On Tue, 11 Jun 2013 13:02:56 -0700, Simon Glass s...@chromium.org
wrote:
Hi Albert,
On Tue, Jun 11, 2013 at 10:36:14AM -0600, Stephen Warren wrote:
On 06/11/2013 10:19 AM, Tom Rini wrote:
On Mon, Jun 10, 2013 at 05:16:56PM -0600, Stephen Warren wrote:
From: Stephen Warren swar...@nvidia.com
This is a series of patches which simplifies the rules to build
*.dts in
1 - 100 of 109 matches
Mail list logo
