Dan,
On 07/17/2013 11:16 PM, Dan Murphy wrote:
> * Enable the OMAP5 EHCI host clocks
> * Add OMAP5 EHCI register definitions
> * Add OMAP5 ES2 host revision
>
> Signed-off-by: Dan Murphy
> ---
> v3 - Updated per comments - http://patchwork.ozlabs.org/patch/258230/
>
> arch/arm/cpu/armv7/omap5/
On Thu, 18 Jul 2013 07:36:40 +0200 Heiko Schocher h...@denx.de wrote,
Hi Heiko,
> Hello Lukasz,
>
> Am 17.07.2013 16:34, schrieb Lukasz Majewski:
> > On Wed, 17 Jul 2013 12:26:35 +0200 Heiko Schocher h...@denx.de wrote,
> >
> > Hi Heiko,
> >
> >> Hello Lukasz,
> >>
> >> Am 16.07.2013 17:35, schr
Hi Kuan-Yu Kuo,
2013/7/18 Kuan-Yu Kuo :
> + /*
> +* enable_fpu:
> +* Some of Andes CPU version support FPU coprocessor, if so,
> +* we should enable it.
> +*/
> +enable_fpu:
> + mfsr$r0, $CPU_VER /* enable FPU if it exists */
> + sr
Dear tiger...@viatech.com.cn,
please stop top posting / full quoting.
In message you
wrote:
>
> My code base is based on u-boot-2013.04 .
> I followed board\samsung\smdkc100\config.mk , and put it into my board
> related directory.
You managed toi find a really bad example of code. This shou
Dear Heiko Schocher,
In message <51e77a1d.90...@denx.de> you wrote:
>
> > Try "nand write.trimffs" to write UBI images produced with ubinize .
>
> This solves not the erasecounter problem, or?
>
> For UBI we need something like this:
> http://www.linux-mtd.infradead.org/doc/ubi.html#L_flasher_a
Tested in at91sam9x5ek and sama5d3x-ek in mmc fat.
Signed-off-by: Josh Wu
---
When I debugging this issue, I also find the thread talking about this:
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/158698
But finally no patch is send for this bug. So I send this and cc all the
people in
Dear Axel Lin,
In message <1374128157.12431.9.camel@phoenix> you wrote:
>
> When I boot Linux kernel with FIT Image, the kernel does not unpacking
> initramfs.
> ( The root cause is "initrd_start is NULL".)
That's probably because you don't tell Linux that there is a ramdisk.
> The initramfs is
Dear Josh Wu,
In message <1374134870-10154-1-git-send-email-josh...@atmel.com> you wrote:
> Tested in at91sam9x5ek and sama5d3x-ek in mmc fat.
>
> Signed-off-by: Josh Wu
> ---
> When I debugging this issue, I also find the thread talking about this:
> http://thread.gmane.org/gmane.comp.boot-lo
Dear Denk:
>Yes, that would be the U-Boot way to implement it. It allows you to
>reusse existing code instead of adding new methods.
So, is there any example SPL code which contains uncompressed algorithm
code?
Best wishes,
___
U-Boot mailing list
U-Bo
Hello,
ethernet support for Wandboard Quad seems to be broken on current master
(576aacdb):
U-Boot 2013.07-rc3-00021-g576aacd (Jul 18 2013 - 08:34:32)
Sascha Silbe writes:
> I've started a git bisect run (booting via USB OTG), but it's going to
> take a while as git bisect is throwing lots of commits without Wandboard
> Quad support at me and seems to be only narrowing down the commits one
> by one rather than on a log-2 basis.
A slightly more
This patch adds support for Realtek PHY modules RTL8211DN and
RTL8211E (variants: RTL8211E-VB-CG, RTL8211E-VL-CG, RTL8211EG-VB-CG),
which can be found on Freescale's T1040RDB boards.
To make the driver more generic across 8211 family, a generic name 8211x
is added for macros and function names.
S
-Original Message-
From: Wood Scott-B07421
Sent: Wednesday, July 17, 2013 2:07 AM
To: Zhang Ying-B40530
Cc: Wood Scott-B07421; u-boot@lists.denx.de; aflem...@gmail.com; Xie
Xiaobo-R63061
Subject: Re: [PATCH 6/7 v8] NAND: TPL : introduce the TPL based on the SPL
On 07/16/2013 05:04:55 A
Missing space for loaddtb command has been added. When missing, ext4load
fails with wrong number of passed parameters.
Signed-off-by: Lukasz Majewski
Cc: Minkyu Kang
---
include/configs/trats.h |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/trats.h b/inc
Hi Sascha,
On Thu, Jul 18, 2013 at 6:07 AM, Sascha Silbe wrote:
> Sascha Silbe writes:
>
>> I've started a git bisect run (booting via USB OTG), but it's going to
>> take a while as git bisect is throwing lots of commits without Wandboard
>> Quad support at me and seems to be only narrowing down
On Thu, Jul 18, 2013 at 8:31 AM, Fabio Estevam wrote:
> Hi Sascha,
>
> On Thu, Jul 18, 2013 at 6:07 AM, Sascha Silbe wrote:
>> Sascha Silbe writes:
>>
>>> I've started a git bisect run (booting via USB OTG), but it's going to
>>> take a while as git bisect is throwing lots of commits without Wan
This patch extends dfu code to support transmission with -R switch
specified at dfu-util.
When -R is specified, the extra USB_REQ_DFU_DETACH request is sent after
successful data transmission. Then dfu resources are released and reset
command is issued.
Signed-off-by: Lukasz Majewski
Signed-off-
Dear tiger...@viatech.com.cn,
In message you
wrote:
>
> >Yes, that would be the U-Boot way to implement it. It allows you to
> >reusse existing code instead of adding new methods.
>
> So, is there any example SPL code which contains uncompressed algorithm
> code?
No, none thaty I am aware of.
Dear Minkyu Kang,
Could you please review this patch?
Best regards,
Piotr Wilczek
--
Samsung R&D Institute Poland
Samsung Electronics
On 05/21/2013 03:39 PM, Piotr Wilczek wrote:
This patch fix wrong value returned by 's5p_gpio_part_max' function
for Exynos4412.
Signed-off-by: Piotr Wilczek
This flag is to have console aware that NET transfer is running or not.
Signed-off-by: Jim Lin
---
Changes in v2:
1. Change configuration name from CONFIG_CTRLC_POLL_MS to CONFIG_CTRLC_POLL_S.
2. New code will be executed only when CONFIG_CTRLC_POLL_S is defined in
configuration header file
TFTP booting is slow when a USB keyboard is installed and
stdin has usbkbd added.
This fix is to change Ctrl-C polling for USB keyboard to every second
when NET transfer is running.
Signed-off-by: Jim Lin
---
Changes in v2:
1. Change configuration name from CONFIG_CTRLC_POLL_MS to CONFIG_CTRLC_P
Dear Jim Lin,
> TFTP booting is slow when a USB keyboard is installed and
> stdin has usbkbd added.
> This fix is to change Ctrl-C polling for USB keyboard to every second
> when NET transfer is running.
>
> Signed-off-by: Jim Lin
> ---
> Changes in v2:
> 1. Change configuration name from CONFI
Hi,
> Dear Heiko Schocher,
>
> In message <51e77a1d.90...@denx.de> you wrote:
> > > Try "nand write.trimffs" to write UBI images produced with ubinize .
> >
> > This solves not the erasecounter problem, or?
> >
> > For UBI we need something like this:
> > http://www.linux-mtd.infradead.org/doc/
On 07/17/2013 11:28 PM, Marek Vasut wrote:
> Dear Dan Murphy,
>
>> Set the usbethaddr based on the OMAP DIE_ID registers
>> which should be unique for each processor.
>>
>> Then set this as the usb ethernet MAC address.
>>
>> Signed-off-by: Dan Murphy
>> ---
>> v3 - new patch
>>
>> board/ti/omap5
Joe,
On Thu, Jul 18, 2013 at 8:41 AM, Fabio Estevam wrote:
> I have tried:
>
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -404,7 +404,7 @@ int genphy_config(struct phy_device *phydev)
> if (val & ESTATUS_1000_XFULL)
> features |= SUPPOR
Dear Dan Murphy,
> On 07/17/2013 11:28 PM, Marek Vasut wrote:
> > Dear Dan Murphy,
> >
> >> Set the usbethaddr based on the OMAP DIE_ID registers
> >> which should be unique for each processor.
> >>
> >> Then set this as the usb ethernet MAC address.
> >>
> >> Signed-off-by: Dan Murphy
> >> --
On Thu, Jul 18, 2013 at 5:07 AM, Sascha Silbe wrote:
>
>
> Charles, do you have any idea why your commit breaks ethernet support on
> Wandboard Quad?
I've never heard of the Wandboard Quad, so I suppose the short answer
is "no". However, the philosophy of the patch I submitted was:
1. Check the
On Thu, Jul 18, 2013 at 11:44 AM, Fabio Estevam wrote:
>
> The following patch fixes it:
>
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -337,12 +337,8 @@ int genphy_parse_link(struct phy_device *phydev)
> estatus = phy_read(phydev, MDIO_DEVAD_NONE,
>
On Mon, Jul 15, 2013 at 04:52:51PM +0200, Koen Kooi wrote:
>
> Op 15 jul. 2013, om 16:49 heeft Tom Rini het volgende
> geschreven:
>
> > On Mon, Jul 15, 2013 at 02:16:50PM +0200, Koen Kooi wrote:
> >>
> >> Op 15 jul. 2013, om 14:11 heeft Nishanth Menon het volgende
> >> geschreven:
> >>
> >
On Tue, Jul 16, 2013 at 10:00:16AM +0200, Enric Balletbo Serra wrote:
[snip]
> o 2nd proposal:
>
> 4 partitions:
> SPL
> U-Boot
> U-Boot Environment
> Filesystem (ubifs): zImage + kernel modules + dtbs files + filesystem
A slight change here would be 3 "part
On Thu, Jul 18, 2013 at 12:49 PM, Charles Coldwell wrote:
> What happens if you just remove the line that assigns phydev->speed in
> the previous version?
It works fine if I do:
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -339,7 +339,6 @@ int genphy_parse_link(struct phy_device *
On Tue, Jul 16, 2013 at 05:35:21PM +0200, Lukasz Majewski wrote:
> Dear All,
>
> Since DFU usage at u-boot is spreading to different device types (MMC,
> NAND), file systems, raw partitions, ubi, etc, I think that it is a
> good moment to unify and structure the form of dfu_alt_info environment
>
On Thu, Jul 18, 2013 at 9:31 AM, Charles Coldwell wrote:
> Can somebody look up the phy register maps for the i.MX6 phy (if it's
> built in) or whatever the Wandboard is using?
mx6qsabresd and wandboard both use AR8031 PHY.
___
U-Boot mailing list
U-Bo
Hi Julius,
On Wed, 17 Jul 2013 17:55:19 -0700, Julius Werner
wrote:
> The existing USB configuration parsing code relies on the descriptors'
> own length values when reading through the configuration blob. Since the
> size of those descriptors is always well-defined, we should rather use
> the k
On Thu, Jul 18, 2013 at 9:31 AM, Charles Coldwell wrote:
> On Thu, Jul 18, 2013 at 5:07 AM, Sascha Silbe wrote:
>>
>>
>> Charles, do you have any idea why your commit breaks ethernet support on
>> Wandboard Quad?
>
> I've never heard of the Wandboard Quad, so I suppose the short answer
> is "no".
> From a security / robustness standpoint,
>
> - if the descriptor length field is found to be abnormal, then the code
> should not process the packet at all. Here it seems it only warns
> then goes on to use the descriptor.
Weren't you the guy who was so worried about poor Chinese devices who
On 07/18/2013 08:15 AM, Jim Lin wrote:
> TFTP booting is slow when a USB keyboard is installed and
> stdin has usbkbd added.
> This fix is to change Ctrl-C polling for USB keyboard to every second
> when NET transfer is running.
I think this general approach is a reasonable compromise to the probl
On Jul 18, 2013, at 12:39 PM, Tom Rini wrote:
> uImage | raw | nand | 0 | "kernel" | "-" | "-" | "-" |
>
> Since partitions provide start/size.
I've got some WIP that pulls the alt info from a GPT partition map on mmc. That
alt settings in DFU can be strings or numbers was ha
On 07/18/2013 08:15 AM, Jim Lin wrote:
> This flag is to have console aware that NET transfer is running or not.
I actually wonder if the shell interpreter or command-invocation code
(to cover automatic bootcmd?) shouldn't set this flag before invoking
every command, and clear it afterward? Or per
Dear Roger
On 07/18/2013 02:10 AM, Roger Quadros wrote:
> Dan,
>
> On 07/17/2013 11:16 PM, Dan Murphy wrote:
>> * Enable the OMAP5 EHCI host clocks
>> * Add OMAP5 EHCI register definitions
>> * Add OMAP5 ES2 host revision
>>
>> Signed-off-by: Dan Murphy
>> ---
>> v3 - Updated per comments - http:
Hi Stewart,
Did you probe PHY CLK on external phy pin ? Is phy clock coming to the soc ?
Regards,
Ramneek
-Original Message-
From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] On
Behalf Of Stewart Hamilton
Sent: Monday, July 08, 2013 12:08 PM
To: 'u-boot@lists.denx
Dear Julius Werner,
> > From a security / robustness standpoint,
> >
> > - if the descriptor length field is found to be abnormal, then the code
> >
> > should not process the packet at all. Here it seems it only warns
> > then goes on to use the descriptor.
>
> Weren't you the guy who was
On Thu, Jul 18, 2013 at 11:13 AM, Tom Rini wrote:
>
> Yes, I'm not terribly happy with what gets done for the shipping U-Boot
> on BBB, but I understand you're trying to not have too special of a
> binary used in programming versus distribution of the board. If the
> vendor wants to ship software
Dear Julius Werner,
> The existing USB configuration parsing code relies on the descriptors'
> own length values when reading through the configuration blob. Since the
> size of those descriptors is always well-defined, we should rather use
> the known sizes instead of trusting device-provided val
- Style cleanup (# define -> #define)
- Due to ROM issues, redudant loading isn't feasible, so drop.
- Given extra space, increase max size of U-Boot to 512KiB
- Correct env size to match usage (we had not re-defined ENV_SIZE).
- Given extra space, keep env size as 128KiB, add redundant environment
We always set a CONFIG_ENV_IS_...somewhere... so drop the initial define
of NOWHERE.
Reviewed-by: Peter Korsgaard
Signed-off-by: Tom Rini
---
include/configs/am335x_evm.h |4
1 file changed, 4 deletions(-)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index
We rework the various board_is_foo() checks to take a pointer to
struct am335x_baseboard_id rather than using a local copy in board.c.
This allows us to make use of the same checks in mux.c as well as fixing
problems when this code could be running from read-only memory.
Reviewed-by: Peter Korsgaa
Due to hardware design the board supported by the am335x_evm config
cannot have both NAND and SPI (or NOR) enabled at the same time due to
conflicts. Disable the NAND SW stack when we know we can't have it
present.
Reviewed-by: Peter Korsgaard
Cc: Justin Waters
Signed-off-by: Tom Rini
---
Cha
Hey all,
This series adds NOR support to am335x_evm, along with a few generic
changes to make gpmc clearer (for per-board things like different NOR
chips, etc). This series depends on the last go-round of the am335x
falcon mode docs as that adds the README that I add more content to.
And while I
Based on our usage of the GPMC, either with NOR or NAND we do not need
to be setting the irqstatus or irqenable bits and should clear them like
we have historically.
Signed-off-by: Tom Rini
---
arch/arm/cpu/armv7/am33xx/mem.c |4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --g
From: Steve Kipisz
This patch adds support for the NOR module that attaches
to the memory cape for a Beaglebone board. This does not
add booting support; only support so that you can boot from
SD/MMC and see the NOR module so that it can be programmed.
Signed-off-by: Steve Kipisz
[trini: Clean
From: Steve Kipisz
NOR requires that s_init be within the first 4KiB of the image so that
we can perform the rest of the required pinmuxing to talk with the rest
of NOR that we are found on. When NOR_BOOT is set we save our
environment in NOR at 512KiB and a redundant copy at 768KiB. We avoid
u
The Beaglebone White may be populated with a memory cape that has a NOR
module. Document how to program it.
Signed-off-by: Tom Rini
---
board/ti/am335x/README | 23 +++
1 file changed, 23 insertions(+)
diff --git a/board/ti/am335x/README b/board/ti/am335x/README
index 6d4
From: Thierry Reding
Disabling the data cache is no longer required to boot Dalmore, so
enable it. This results in notably better performance when loading
and booting the Linux kernel.
Signed-off-by: Thierry Reding
---
include/configs/dalmore.h | 3 ---
1 file changed, 3 deletions(-)
diff --g
From: Thierry Reding
Currently all Tegra SoCs are assumed to have 32 byte cache lines. This
isn't true for Tegra114, however, which uses 4 Cortex-A15 cores and
therefore uses a cache line size of 64 bytes. Move the cache line size
setting to the per-SoC common configuration file.
Signed-off-by:
Hi Tom,
On Thu, 18 Jul 2013 15:13:04 -0400, Tom Rini wrote:
> Changes in v4:
> - Rebase to current. Note that the asm statements seemingly conflict
> with the save_omap_boot_params call, but I don't see why.
How exactly does the conflict manifest itself?
Amicalement,
--
Albert.
___
> Mulling over this some more, I suspect if the device does have incorrect
> config
> descriptor, we should just ignore the device because it's broken piece of
> junk.
I can change it if you insist, but I'd like to keep it to make the
code look more consistent (since later on with the interface/
On Thu, Jul 18, 2013 at 09:21:33PM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> On Thu, 18 Jul 2013 15:13:04 -0400, Tom Rini wrote:
>
> > Changes in v4:
> > - Rebase to current. Note that the asm statements seemingly conflict
> > with the save_omap_boot_params call, but I don't see why.
>
> Ho
From: Fabio Estevam
Since commit de1d786edf (add support for Xilinx 1000BASE-X phy (GTX))
we are no longer able to use tftp transfers on some mx6 boards
like mx6qsabresd and wandboard, which use AR8031 Ethernet phy.
Revert the commit as a proper fix is still not available.
Reported-by: Sascha S
From: Fabio Estevam
Since commit de1d786edf (add support for Xilinx 1000BASE-X phy (GTX))
we are no longer able to use tftp transfers on some mx6 boards
like mx6qsabresd and wandboard, which use AR8031 Ethernet phy.
Revert the commit as a proper fix is still not available.
Reported-by: Sascha S
On 07/18/2013 01:13 PM, Thierry Reding wrote:
> From: Thierry Reding
>
> Currently all Tegra SoCs are assumed to have 32 byte cache lines. This
> isn't true for Tegra114, however, which uses 4 Cortex-A15 cores and
> therefore uses a cache line size of 64 bytes. Move the cache line size
> setting
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 07/18/2013 04:17 PM, Lukasz Majewski wrote:
> On Thu, 18 Jul 2013 13:30:55 -0400 Michael Cashwell
> wrote:
>
>> On Jul 18, 2013, at 12:39 PM, Tom Rini wrote:
>>
>>> uImage | raw | nand | 0 | "kernel" | "-" | "-"
>>> | "-" |
>>>
On Thu, 18 Jul 2013 13:30:55 -0400
Michael Cashwell wrote:
> On Jul 18, 2013, at 12:39 PM, Tom Rini wrote:
>
> > uImage | raw | nand | 0 | "kernel" | "-" | "-" |
> > "-" |
> >
> > Since partitions provide start/size.
>
> I've got some WIP that pulls the alt info from a GPT p
Dear Stephen Warren,
> On 07/18/2013 08:15 AM, Jim Lin wrote:
> > This flag is to have console aware that NET transfer is running or not.
>
> I actually wonder if the shell interpreter or command-invocation code
> (to cover automatic bootcmd?) shouldn't set this flag before invoking
> every comma
Dear Julius Werner,
> > Mulling over this some more, I suspect if the device does have incorrect
> > config descriptor, we should just ignore the device because it's broken
> > piece of junk.
>
> I can change it if you insist, but I'd like to keep it to make the
> code look more consistent (since
Hi Albert,
On 07/17/2013 06:42 PM, Albert ARIBAUD wrote:
Hi Bo,
On Wed, 17 Jul 2013 18:27:29 +0800, Bo Shen
wrote:
Hi Albert,
On 07/17/2013 06:10 PM, Albert ARIBAUD wrote:
Hi Bo,
On Wed, 17 Jul 2013 17:14:17 +0800, Bo Shen
wrote:
As both the DDR SDRAM and NAND flash connect to EBI on a
On Thu, Jul 18, 2013 at 6:04 PM, Fabio Estevam wrote:
> From: Fabio Estevam
>
> Since commit de1d786edf (add support for Xilinx 1000BASE-X phy (GTX))
> we are no longer able to use tftp transfers on some mx6 boards
> like mx6qsabresd and wandboard, which use AR8031 Ethernet phy.
>
> Revert the co
On Thu, Jul 18, 2013 at 03:19:18PM -0600, Stephen Warren wrote:
> On 07/18/2013 01:13 PM, Thierry Reding wrote:
> > From: Thierry Reding
> >
> > Currently all Tegra SoCs are assumed to have 32 byte cache lines. This
> > isn't true for Tegra114, however, which uses 4 Cortex-A15 cores and
> > there
Hello Lukasz,
Am 18.07.2013 13:19, schrieb Lukasz Majewski:
This patch extends dfu code to support transmission with -R switch
specified at dfu-util.
When -R is specified, the extra USB_REQ_DFU_DETACH request is sent after
successful data transmission. Then dfu resources are released and reset
updating an ubi partition needs a completely erased mtd partition,
see:
http://lists.infradead.org/pipermail/linux-mtd/2011-May/035416.html
So, add partubi alt setting for the dfu_alt_info environment
variable to mark this partition as an ubi partition. In case we
update an ubi partition, we erase
On 07/18/2013 08:38 PM, Thierry Reding wrote:
> On Thu, Jul 18, 2013 at 03:19:18PM -0600, Stephen Warren wrote:
>> On 07/18/2013 01:13 PM, Thierry Reding wrote:
>>> From: Thierry Reding
>>>
>>> Currently all Tegra SoCs are assumed to have 32 byte cache
>>> lines. This isn't true for Tegra114, how
On 18/07/13 17:08, Wolfgang Denk wrote:
> Dear tiger...@viatech.com.cn,
>
> please stop top posting / full quoting.
>
>
> In message
> you wrote:
>>
>> My code base is based on u-boot-2013.04 .
>> I followed board\samsung\smdkc100\config.mk , and put it into my board
>> related directory.
>
>
Hello Marek,
Am 18.07.2013 17:10, schrieb Marek Vasut:
Hi,
Dear Heiko Schocher,
In message<51e77a1d.90...@denx.de> you wrote:
Try "nand write.trimffs" to write UBI images produced with ubinize .
This solves not the erasecounter problem, or?
For UBI we need something like this:
http://www
On 18/07/13 20:14, Lukasz Majewski wrote:
> Missing space for loaddtb command has been added. When missing, ext4load
> fails with wrong number of passed parameters.
>
>
> Signed-off-by: Lukasz Majewski
> Cc: Minkyu Kang
> ---
> include/configs/trats.h |2 +-
> 1 file changed, 1 insertion(+
On 18/07/13 23:10, Piotr Wilczek wrote:
> Dear Minkyu Kang,
>
> Could you please review this patch?
Please don't top posting.
And your patches will be merged after release.
>
> Best regards,
> Piotr Wilczek
>
> --
> Samsung R&D Institute Poland
> Samsung Electronics
>
Thanks,
Minkyu Kang.
On Fri, 19 Jul 2013 06:32:14 +0200 Heiko Schocher h...@denx.de wrote,
Hi Heiko,
> updating an ubi partition needs a completely erased mtd partition,
> see:
> http://lists.infradead.org/pipermail/linux-mtd/2011-May/035416.html
>
> So, add partubi alt setting for the dfu_alt_info environment
> var
76 matches
Mail list logo
