Hello all,
I am continuing my effort to merge all arch/arm/cpu/**/start.S files
into a single arch/arm/cpu/start.S one, keeping as little cpu-specific
code as I can.
However, there is a non-technical issue: there are many copyright lines
in the files, plus in some case inherited copyright when
Dear Matthias Fuchs,
In message 5201ec5b.9070...@esd.eu you wrote:
This board and especially the CPU (PPC405CR) is EOL.
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
MAINTAINERS|1 -
board/esd/canbt/Makefile | 31 --
board/esd/canbt/canbt.c| 164
Dear Albert,
In message 20130807092318.1fd9bab5@lilith you wrote:
The quickest, and preferred by me, way would be to create the new file
with all copyright lines simply merged, and rely on the git repo to
find out who contributed what.
Yes, this makes sense.
I could also put one copyright
Hi, experts:
How to select a stable uboot source code for developing a commercial
product?
There are so many official release package, such as:
u-boot-2012.04.tar.bz2
u-boot-2012.10.tar.bz2
u-boot-2013.04.tar.bz2
u-boot-2013.07.tar.bz2
...
So, how to identify which package is more
Without this change EDID_DETAILED_TIMING_VSYNC_OFFSET
and EDID_DETAILED_TIMING_VSYNC_PULSE_WIDTH macros can
not be used (compile error).
The fix is quite trivial: rename struct member to the
expected name.
Signed-off-by: Christian Gmeiner christian.gmei...@gmail.com
---
include/edid.h |2 +-
This patch modifies the WM8994 codec to support I2S0 channel
in codec slave mode
Signed-off-by: Dani Krishna Mohan krishna...@samsung.com
---
drivers/sound/sound.c|2 +-
drivers/sound/wm8994.c | 95 +++---
This patch makes required changes to make use
of I2S0 channel instead of I2S1 channel on exynos5250.
Signed-off-by: Dani Krishna Mohan krishna...@samsung.com
---
arch/arm/include/asm/arch-exynos/i2s-regs.h |6 ++
drivers/sound/samsung-i2s.c | 16 ++--
2
This patch makes the necessary changes for making use of
I2S0 channel instead of I2S1 channel on smdk board. This
changes are done to maintain the uniformity to use I2S0 channel.
Signed-off-by: Dani Krishna Mohan krishna...@samsung.com
---
arch/arm/cpu/armv7/exynos/clock.c | 13
Hi,
I'm trying to get the U-Boot running on the Iris board with the Toradex
Colibri T20 module. I was able to flash the U-Boot and it starts but
then immediately stops with the only message being:
U-Boot 2013.07 (Aug 06 2013 - 17:47:43)
TEGRA20
Board: Toradex Colibri T20 on Iris
DRAM:
The
This patch enables default I2S0 channel and replaces I2S1.
I2S platform parameter has been moved to a common file viz
exynos5.dtsi.
Signed-off-by: Dani Krishna Mohan krishna...@samsung.com
---
arch/arm/dts/exynos5250.dtsi | 10 --
board/samsung/dts/exynos5250-smdk5250.dts
This patch removes support for the APM 405CR CPU.
This CPU is EOL and no board uses this chip.
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
arch/powerpc/cpu/ppc4xx/4xx_uart.c| 10 ++--
arch/powerpc/cpu/ppc4xx/cpu.c | 18 +--
arch/powerpc/cpu/ppc4xx/cpu_init.c|
Hi Wolfgang,
On Wed, 07 Aug 2013 09:33:18 +0200, Wolfgang Denk w...@denx.de wrote:
Dear Albert,
In message 20130807092318.1fd9bab5@lilith you wrote:
The quickest, and preferred by me, way would be to create the new file
with all copyright lines simply merged, and rely on the git repo
Dear TigerLiu,
In message fe7aded5c2218b4786c09cd97dc4c49f9eb...@exchbj02.viatech.com.bj you
wrote:
How to select a stable uboot source code for developing a commercial
product?
Just use the latest offical release (unless there are specific reasons
not to).
So, how to identify which
Dear Matthias Fuchs,
In message 520211c2.2030...@esd.eu you wrote:
This board and especially the CPU (PPC405CR) is EOL.
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
V2: add entry to doc/README.scrapyard
...
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index
From: Miao Yan miao@windriver.com
fdt_fixup_memory_banks() will add and update /memory node in
device tree blob. In the case that /memory node doesn't exist,
after adding a new one, this function returns error.
The correct behavior should be continuing to update its properties.
Dear Matthias Fuchs,
In message 52022de2.9090...@esd.eu you wrote:
This board and especially the CPU (PPC405CR) is EOL.
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
V2: add entry to doc/README.scrapyard
V3: add missing commit IDs in README.scrapyard
Thanks!
Acked-by: Wolfgang
Hi,
On Wed, Aug 7, 2013 at 11:27 AM, Sourav Poddar sourav.pod...@ti.com wrote:
Hi Jagan,
On Wednesday 31 July 2013 12:23 PM, Sourav Poddar wrote:
Hi Jagan,
On Tuesday 23 July 2013 07:53 PM, Sourav Poddar wrote:
+ jagan,
On Tuesday 23 July 2013 02:29 PM, Sourav Poddar wrote:
Reading
Hi Jagan,
On Wednesday 07 August 2013 05:21 PM, Jagan Teki wrote:
Hi,
On Wed, Aug 7, 2013 at 11:27 AM, Sourav Poddarsourav.pod...@ti.com wrote:
Hi Jagan,
On Wednesday 31 July 2013 12:23 PM, Sourav Poddar wrote:
Hi Jagan,
On Tuesday 23 July 2013 07:53 PM, Sourav Poddar wrote:
+ jagan,
On
On Tue, Aug 06, 2013 at 06:11:25PM -0500, Dennis Gilmore wrote:
On Tue, 6 Aug 2013 17:42:31 -0400
Tom Rini tr...@ti.com wrote:
On Tue, Aug 06, 2013 at 11:22:22AM -0500, Dennis Gilmore wrote:
[snip]
The only way I could see having us write a file to disk with the
environment
On Tue, 2013-08-06 at 11:00 -0500, Dinh Nguyen wrote:
On Tue, 2013-08-06 at 09:08 -0500, Chin Liang See wrote:
Separating the configuration file for Virtual
Target and real hardware Cyclone V development kit
Signed-off-by: Chin Liang See cl...@altera.com
Reviewed-by: Pavel Machek
On Tue, 2013-08-06 at 11:03 -0500, Dinh Nguyen wrote:
On Tue, 2013-08-06 at 09:10 -0500, Chin Liang See wrote:
Adding System Manager driver which will configure the
pin mux for real hardware Cyclone V development kit
(not Virtual Platform)
Signed-off-by: Chin Liang See cl...@altera.com
On Tue, 2013-08-06 at 11:04 -0500, Dinh Nguyen wrote:
On Tue, 2013-08-06 at 09:10 -0500, Chin Liang See wrote:
Adding the generated pin mux
configuration by Preloader Generator tool
Signed-off-by: Chin Liang See cl...@altera.com
Reviewed-by: Pavel Machek pa...@denx.de
Cc: Wolfgang
On Wed, Aug 7, 2013 at 5:34 PM, Sourav Poddar sourav.pod...@ti.com wrote:
Hi Jagan,
On Wednesday 07 August 2013 05:21 PM, Jagan Teki wrote:
Hi,
On Wed, Aug 7, 2013 at 11:27 AM, Sourav Poddarsourav.pod...@ti.com
wrote:
Hi Jagan,
On Wednesday 31 July 2013 12:23 PM, Sourav Poddar wrote:
Adding the generated pin mux configuration by Preloader
Generator tool
Signed-off-by: Chin Liang See cl...@altera.com
Reviewed-by: Pavel Machek pa...@denx.de
Acked-by: Dinh Nguyen dingu...@altera.com
Cc: Wolfgang Denk w...@denx.de
CC: Pavel Machek pa...@denx.de
Cc: Dinh Nguyen dingu...@altera.com
Adding System Manager driver which will configure the
pin mux for real hardware Cyclone V development kit
(not Virtual Platform)
Signed-off-by: Chin Liang See cl...@altera.com
Reviewed-by: Pavel Machek pa...@denx.de
Acked-by: Dinh Nguyen dingu...@altera.com
Cc: Wolfgang Denk w...@denx.de
CC:
Separating the configuration file for Virtual
Target and real hardware Cyclone V development kit
Signed-off-by: Chin Liang See cl...@altera.com
Reviewed-by: Pavel Machek pa...@denx.de
Cc: Wolfgang Denk w...@denx.de
Cc: Pavel Machek pa...@denx.de
Cc: Dinh Nguyen dingu...@altera.com
Cc: Tom Rini
On Wednesday 07 August 2013 08:35 PM, Jagan Teki wrote:
On Wed, Aug 7, 2013 at 5:34 PM, Sourav Poddarsourav.pod...@ti.com wrote:
Hi Jagan,
On Wednesday 07 August 2013 05:21 PM, Jagan Teki wrote:
Hi,
On Wed, Aug 7, 2013 at 11:27 AM, Sourav Poddarsourav.pod...@ti.com
wrote:
Hi Jagan,
On
On Tue, 2013-08-06 at 11:01 -0500, Dinh Nguyen wrote:
On Tue, 2013-08-06 at 09:09 -0500, Chin Liang See wrote:
Consolidating reset code into reset_manager.c.
Also separating reset configuration for virtual target
and real hardware Cyclone V development kit
Signed-off-by: Chin Liang See
Consolidating reset code into reset_manager.c. Also
separating reset configuration for virtual target and
real hardware Cyclone V development kit
Signed-off-by: Chin Liang See cl...@altera.com
Reviewed-by: Pavel Machek pa...@denx.de
Cc: Wolfgang Denk w...@denx.de
Cc: Pavel Machek pa...@denx.de
IGEP boards now have Device Tree support in the mainline
kernel. To boot an IGEP board using a DT, a uEnv.txt plain
text file could be used to define a custom uenvcmd that will
be run by the default boot command.
It is more convenient to change the default boot command to
allow loading a FDT if
From: Enric Balletbo i Serra eballe...@gmail.com
Able to load the kernel from some form of ext[234] or FAT. Also, with v3.9 and
later of the Linux Kernel, uImage isn't builtable anymore by default, so we
should switch to use the bootz command.
Signed-off-by: Enric Balletbo i Serra
On Thu, Jul 25, 2013 at 9:27 AM, Enric Balletbo i Serra
eballe...@gmail.com wrote:
From: Enric Balletbo i Serra eballe...@iseebcn.com
After commit:
79cd2f814b1c75efd47161ac27f4cbebf768240f config_cmd_default.h: Remove
CONFIG_CMD_MEMTEST
It's not necessary to undef the
On 08/06/13 13:40, Wolfgang Denk wrote:
Dear Mateusz Zalega,
In message 1375786242-11734-1-git-send-email-m.zal...@samsung.com you wrote:
Current implementation of do_dfu() and do_usb_mass_storage() requires
board-specific board_usb_init() which performs USB hardware initialization.
I
On Thu, Jul 25, 2013 at 9:27 AM, Enric Balletbo i Serra
eballe...@gmail.com wrote:
Now, the default kernel to boot the IGEP COM AQUILA is device tree based. As
old kernel is deprecated we should adapt the boot commands to use DTB files.
Also, with v3.9 and later of the Linux Kernel, uImage
Now that Device Tree support for IGEP boards has been included
in the mainline Linux kernel, it's better if the default boot
command has proper support for booting with DT.
This patch-set his composed of the following patches:
Enric Balletbo i Serra (1):
ARM: igep00x0.h: Enable the use of
On Thu, Jul 25, 2013 at 9:27 AM, Enric Balletbo i Serra
eballe...@gmail.com wrote:
From: Enric Balletbo i Serra eballe...@iseebcn.com
We will not use CYGNUS names for any IGEP COM based on AM335x processor,
so, to avoid confusion, remove from headers.
Signed-off-by: Enric Balletbo i Serra
On Thu, Jul 25, 2013 at 9:27 AM, Enric Balletbo i Serra
eballe...@gmail.com wrote:
From: Enric Balletbo i Serra eballe...@iseebcn.com
Add to the default environment the possibily to boot from NAND using
a ubi rootfs. Also the partition scheme is set as follows:
Start
Hi Fabio,
Thanks for your reply, but common.h is already included.
Specifically, I am looking at inserting a few debug() or serial_puts()
calls to arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c, and this is where I see
the build error.
-Randy
On Tue, Aug 6, 2013 at 9:43 PM, Fabio Estevam
Hi Enric,
On Thu, Jul 25, 2013 at 9:27 AM, Enric Balletbo i Serra
eballe...@gmail.com wrote:
From: Enric Balletbo i Serra eballe...@iseebcn.com
As config was originally based on am335x_evm.h we have also some
duplicate / unnused #defines.
Commit 15191c91 removed these #defines on various
On 08/06/2013 11:52 PM, Simon Glass wrote:
Tegra recently moved to the new I2C framework, which sets up I2C prior to
relocation, and prior to calling i2c_init_board(). This causes a crash on
Tegra boards.
note:
There are many ways to fix this. I believe this is one. It disables i2c_init()
On Mon, Jul 29, 2013 at 05:57:22PM +0200, Enric Balletbo Serra wrote:
Hi Tom,
2013/7/23 Dan Murphy dmur...@ti.com:
On 07/19/2013 02:00 PM, Tom Rini wrote:
Add a am33xx_spl_board_init (and enable the PMICs) that we may see,
depending on the board we are running on. In all cases, we see
On 08/06/2013 04:50 AM, Mateusz Zalega wrote:
This commit unifies board-specific USB initialization implementations
under one symbol (usb_board_init), declaration of which is available in
usb.h.
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
-int
On 08/06/2013 04:50 AM, Mateusz Zalega wrote:
This commit postpones initialization of USB hardware until
usb_board_init() is called by a command implementation
(ie. do_dfu()) or a driver.
diff --git a/arch/arm/include/asm/arch-tegra/usb.h
b/arch/arm/include/asm/arch-tegra/usb.h
/* Setup
Hi,
On Mon, Jul 29, 2013 at 11:38 PM, Jagannadha Sutradharudu Teki
jagannadha.sutradharudu-t...@xilinx.com wrote:
This patch set adds bank addr access support for macronix flash's
so-that the macronix flashes which has 16Mbyte sizes can be
accessible in 3-byte addressing mode.
REQUEST FOR
On Mon, Jul 29, 2013 at 05:57:22PM +0200, Enric Balletbo Serra wrote:
Hi Tom,
[snip]
As example, I just pushed[1] in my personal git an implementation of
am33xx_spl_board_init for IGEP COM AQUILA AM335x based on your
patches. As you can see this function is very similar to the function
On 08/06/13 13:40, Wolfgang Denk wrote:
Dear Mateusz Zalega,
In message 1375786242-11734-1-git-send-email-m.zal...@samsung.com you
wrote:
Current implementation of do_dfu() and do_usb_mass_storage() requires
board-specific board_usb_init() which performs USB hardware initialization.
I
Dear Mateusz Zalega,
In message 52026e5a.4040...@samsung.com you wrote:
I appreciate your efforts, but this whole area clearly falls into the
domain of the device model rework. Is your suggested implementation
in any way synchronized with what has been discussed about this topic
before?
On 08/07/13 18:23, Stephen Warren wrote:
This commit unifies board-specific USB initialization implementations
under one symbol (usb_board_init), declaration of which is available in
usb.h.
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
-int
This is v2 series for past read/write instruction support.
this series also includes zynq qspi driver patch set for knowing
usage of these extended/quad read and write commnads.
http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/150148
Added a support for common probe, hence removed removed
spi_flash_do_alloc reference.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v2:
- none
include/spi_flash.h | 38 --
1 file changed, 38 deletions(-)
diff --git
This patch provides support to program a flash config register.
Configuration register contains the control bits used to configure
the different configurations and security features of a device.
User need to set these bits through spi_flash_cmd_write_config()
based on their usage.
From: Jagannadha Sutradharudu Teki jagannadha.sutradharudu-t...@xilinx.com
Tested qspi on zynq board with stmicro, spansion and winbond
flashes by enabling CONFIG_ZYNQ_QSPI.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v2:
- none
include/configs/zynq.h
From: Jagannadha Sutradharudu Teki jagannadha.sutradharudu-t...@xilinx.com
Enabled bank/extn' addr register support for accessing
16Mbyte flash devices.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v2:
- none
include/configs/zynq.h | 1 +
1 file
Current sf uses FAST_READ command, this patch adds support to
use the different/extended read command.
This implementation will determine the fastest command by taking
the supported commands from the flash and the controller, controller
is always been a priority.
Signed-off-by: Jagannadha
QPP - Quad Page Program
DIOR - Dual IO high perf read
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v2:
- none
drivers/spi/zynq_qspi.c | 4
1 file changed, 4 insertions(+)
diff --git a/drivers/spi/zynq_qspi.c b/drivers/spi/zynq_qspi.c
index
Zynq controller supports all basic, extended read and quad
read/write commands, so enable them in the driver so-that
the sf will look for the fastest cmd w.r.t flash supported one.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v2:
- none
From: Jagannadha Sutradharudu Teki jagannadha.sutradharudu-t...@xilinx.com
Zynq qspi controller driver supports single bus
with singe chipselect.
Zynq qspi can be operated in below connection modes
- single qspi
- dual qspi, with dual stacked
- dual qspi, with dual parallel
Signed-off-by:
Current sf uses PAGE_PROGRAM command for write and FAST_READ,
SLOW_READ, DUAL_READ and DUAL_IO_READ commands for read this
patch adds support to use the quad read/write commands.
- QUAD_PAGE_PROGRAM
- QUAD_OUTPUT_FAST
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for
This patch provides support to set the quad enable bit on flash.
quad enable bit needs to set before performing any quad IO
operations on respective SPI flashes.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v2:
- none
Hi Stephen,
On Wed, Aug 7, 2013 at 10:20 AM, Stephen Warren swar...@wwwdotorg.orgwrote:
On 08/06/2013 11:52 PM, Simon Glass wrote:
Tegra recently moved to the new I2C framework, which sets up I2C prior to
relocation, and prior to calling i2c_init_board(). This causes a crash on
Tegra
On Wed, 7 Aug 2013 09:19:21 -0400
Tom Rini tr...@ti.com wrote:
On Tue, Aug 06, 2013 at 06:11:25PM -0500, Dennis Gilmore wrote:
On Tue, 6 Aug 2013 17:42:31 -0400
Tom Rini tr...@ti.com wrote:
On Tue, Aug 06, 2013 at 11:22:22AM -0500, Dennis Gilmore wrote:
[snip]
The only way I
Hi all,
My current default partition layout is as follow:
1) u-boot,
2) environment variables
3) kernel,
4) filesystem
I have seen in some implementations, that there is one partition of data
after the filesystem's partition as follow:
1) u-boot,
2) environment variables
3) kernel,
4) filesystem
62 matches
Mail list logo
