Hi, experts:
I have a question about compiler option -mno-unaligned-access.
Why not open -mno-unaligned-access compiler option globally by default
when compiling u-boot?
It seems if one driver needs to open it, should set it in Makefile
individually:
$(obj) tst/tst.o: CFLAGS +=
Hi,
I have a VxWorks Boot Loader running on my P3041 and from there I'm willing to
execute a U-Boot image that was previously burnt in my flash.
The U-Boot image - u-boot-p3041ds-2011.09-r5.bin - is 512KB and is burnt at the
address of 0xF802,, ending at 0xF809, (no env. parameters were
Dear Jagan,
On Thu, Mar 21, 2013 at 10:21 PM, Detlev Zundel d...@denx.de wrote:
Hi fellow U-Boot developers,
people meeting us at our booth at the Embedded World trade show in
Nürnberg this year may already have heard rumours about it but now it is
official - there will be an U-Boot
Hi Fabio,
CC to Eric and Troy.
On 11/09/2013 23:14, Fabio Estevam wrote:
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c
b/board/freescale/mx6sabresd/mx6sabresd.c
index c832bd9..0f91fe2 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
Hi Fabio,
On 11/09/2013 23:14, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
If a HDMI cable is not connected, the following message is seen on boot:
CPU: Freescale i.MX6Q rev1.1 at 792 MHz
Reset cause: POR
Hello,
Going back to this old thread I have some news regarding the problem with TFTP
transmissions blocking (timed out) after 10 seconds on the FEC of the MX28.
See below:
On 07/17/2013 05:55 PM, Hector Palacios wrote:
Dear Marek,
On 07/16/2013 06:44 AM, Marek Vasut wrote:
Dear Fabio
On Tue, Sep 10, 2013 at 11:12 AM, Enric Balletbo i Serra
eballe...@gmail.com wrote:
From: Enric Balletbo i Serra eballe...@iseebcn.com
We can run the DDR at 400MHz, so update the timings for that purpose.
Signed-off-by: Enric Balletbo i Serra eballe...@iseebcn.com
---
Dear Lukasz Majewski,
New dfu_init_env_entities() function has been extracted from cmd_dfu.c and
stored at dfu core.
This is a dfu centric code, so it shall be processed in the core.
Change-Id: I756c5de922fa31399d8804eaadc004ee98844ec2
Signed-off-by: Lukasz Majewski
Hi,
I have a global variable problem with u-boot when i enabled with '-pie'
flag during linking time. In the interrupt handler i set the global
variable to 1 initially is set to 0 but i am not able to see the updated
global variable after return from interrupt handler. But it is happen when
i
Dear Hector Palacios,
Hello,
Going back to this old thread I have some news regarding the problem with
TFTP transmissions blocking (timed out) after 10 seconds on the FEC of the
MX28. See below:
On 07/17/2013 05:55 PM, Hector Palacios wrote:
Dear Marek,
On 07/16/2013 06:44 AM,
Dear Robert Hodaszi,
html
head
meta content=text/html; charset=ISO-8859-1
http-equiv=Content-Type
/head
body bgcolor=#FF text=#00
div class=moz-cite-prefixHi,br
br
There are a lot of bug announcement, just make a search:br
meta
Introduce different macros for storing addresses of multiple
USB controllers. This is required for successful initialization
and usage of multiple USB controllers inside u-boot
Signed-off-by: Ramneek Mehresh ramneek.mehr...@freescale.com
---
arch/powerpc/cpu/mpc83xx/cpu_init.c | 2 +-
CONFIG_USB_MAX_CONTROLLER_COUNT macro recently defined for
initializing all USB controllers on a given platform. This
macro is defined for all 85xx socs
Signed-off-by: Ramneek Mehresh ramneek.mehr...@freescale.com
---
arch/powerpc/cpu/mpc8xxx/fdt.c| 6 --
Hi,
Sorry, hopefully that will be a plain-text.
There are a lot of bug announcement, just make a search:
gcc.gnu.org/bugzilla/show_bug.cgi?id=33721
gcc.gnu.org/bugzilla/show_bug.cgi?id=16660
Also, I printed out the buffer addresses, and that temporary RX buffer
was not aligned. So the
Hi,
Sorry, hopefully that will be a plain-text.
There are a lot of bug announcement, just make a search:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=33721
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=16660
Also, I printed out the buffer addresses, and that temporary RX buffer
was not aligned.
Make multiple USB controllers work inside u-boot by doing the
following:
- Defining max. no of USB controllers for each soc
- Defining proper base address for each controller
so that initialization code can work for each of them
Ramneek Mehresh (2):
powerpc/usb:Define
board/ti/am335x/README talks about eMMC env on the main partition, with
redundancy, rather than in one of the boot partitions. Switch to using
the main partition + redundant copy.
Signed-off-by: Tom Rini tr...@ti.com
---
include/configs/am335x_evm.h |7 ---
1 file changed, 4
This patch adds support for our companies board CDU9G25 with Atmel AT91SAM9G25,
128MB DDR2, 256MB NAND.
Signed-off-by: Jiri Prchal jiri.prc...@aksignal.cz
---
v2
Fixed static IP and MAC addr cofiguration by random MAC and DHCP.
Added entry to MAINTAINERS.
Fixed line lenght, trailing spaces and
Hello Tom,
The following changes since commit
68e1747f9c0506159e8ecc9a4feb58e9c65a7b39:
socfpga: Creating driver for Reset Manager (2013-09-06 12:09:06 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to
malloc can fail, so we should better check its return value before using it.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
drivers/mmc/fsl_esdhc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index f87e647..a7170b4 100644
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 09/11/2013 09:39 AM, FengHua wrote:
hi Rob, Thank you for your checking of this patch.
-原始邮件- 发件人: Rob Herring robherri...@gmail.com 发送时间:
2013年9月11日 星期三 收件人: feng...@phytium.com.cn 抄送:
u-boot@lists.denx.de, tr...@ti.com 主题: Re:
Dear Robert Hodaszi,
Hi,
Sorry, hopefully that will be a plain-text.
There are a lot of bug announcement, just make a search:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=33721
This was apparently fixed three years ago.
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=16660
And this one six
Dear Robert Hodaszi,
I just brought up two samples, that it was a long-term problem. Now it
is fixed. But if somebody is trying to compile the U-Boot with an older
toolchain, it could cause problems. I had problems with 4.4.6.
Yes, 2k is a lot, and I would not put it on the stack. That was
On 2013-09-12 16:31, Marek Vasut wrote:
Dear Robert Hodaszi,
Please do not top-post.
Memalign should do here with proper rounding. Can you prepare another patch
please?
Best regards,
Marek Vasut
Ok. I will try to do that tomorrow.
Best regards,
Robert Hodaszi
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 09/11/2013 10:10 PM, FengHua wrote:
hi,
The following codes are originated from linux kernel. I am not sure
whether license issues exist.
I list the original codes at the bottom. Please check it and give me some
advice.
If license
Hi Stefano,
On 09/12/2013 03:17 AM, Stefano Babic wrote:
Hi Fabio,
On 11/09/2013 23:14, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
If a HDMI cable is not connected, the following message is seen on boot:
CPU: Freescale i.MX6Q rev1.1 at 792 MHz
Reset cause: POR
On Tue, 2013-09-03 at 11:26 +0530, Pekon Gupta wrote:
diff --git a/doc/README.nand b/doc/README.nand
index 913e9b5..f72f618 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -169,6 +169,19 @@ Configuration Options:
Please convert your driver even if you don't need the extra
On Thu, Sep 12, 2013 at 3:53 PM, Wolfgang Denk w...@denx.de wrote:
Dear Fabio Estevam,
In message
caomzo5by6kdocown_srwhpe7ssmjarez2bcfxggff-_wrdg...@mail.gmail.com you
wrote:
It makes perfect sense to allocate variable with function scope only
on the stack. That's what the stack has
Hi Minkyu,
Hi Minkyu
Dear Lukasz,
On 13/08/13 06:15, Lukasz Majewski wrote:
This commit brings removal of duplicated code for UART IP block
embedded at Samsung SoCs.
New include/asm/samsung-common directory has been created to store
common code for existing and future
On Thu, Sep 12, 2013 at 08:46:50AM -0400, Tom Rini wrote:
board/ti/am335x/README talks about eMMC env on the main partition, with
redundancy, rather than in one of the boot partitions. Switch to using
the main partition + redundant copy.
Signed-off-by: Tom Rini tr...@ti.com
I'm going to
Dear Marek Vasut,
In message 201309121605.04824.ma...@denx.de you wrote:
Looking at the code one more time, it'd make most sense to simply allocate
the
buffer NOT on stack, but with some memalign-kind-of call to avoid this abuse
of
stack. You see, the max packet size is around 2k,
On Mon, 2013-09-09 at 16:43 +0530, Prabhakar Kushwaha wrote:
Hi,
SPL framework is used to support multi-stage booting. Where first
level boot loader is created via SPL having relocate_code() function.
I am working on a Freescale's SoC which has less internal SRAM.
I don't want to use
Dear Roy Caspi,
In message f977efba9bba814ea37842e54344726d28664...@tlrd-mail.telrad.co.il
you wrote:
I have a VxWorks Boot Loader running on my P3041 and from there I'm willing
to execute a U-Boot image that was previously burnt in my flash.
The U-Boot image -
Stephan,
The processor is a 460SX (shares the same data sheet as 460GT).
In my /include/configs/boardname.h file I include amcc-common.h which
has what you suggested:
/*
* UART
*/
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define
Dear Robert Hodaszi,
In message 5231a0c0.8070...@digi.com you wrote:
Sorry, hopefully that will be a plain-text.
There are a lot of bug announcement, just make a search:
gcc.gnu.org/bugzilla/show_bug.cgi?id=33721
gcc.gnu.org/bugzilla/show_bug.cgi?id=16660
Hm... what exactly are the
I just brought up two samples, that it was a long-term problem. Now it
is fixed. But if somebody is trying to compile the U-Boot with an older
toolchain, it could cause problems. I had problems with 4.4.6.
Yes, 2k is a lot, and I would not put it on the stack. That was just a
quick fix. It
Dear Fabio Estevam,
In message caomzo5by6kdocown_srwhpe7ssmjarez2bcfxggff-_wrdg...@mail.gmail.com
you wrote:
It makes perfect sense to allocate variable with function scope only
on the stack. That's what the stack has been invented for.
This buffer in the fec driver will be used in DMA
Dear Hector Palacios,
In message 523195ca.3010...@digi.com you wrote:
Here is a patch:
From: Robert Hodaszi robert.hoda...@digi.com
Date: Fri, 6 Sep 2013 09:50:52 +0200
Subject: [PATCH] net: fec: fix invalid temporary RX buffer alignment because
of GCC bug
Older GCC versions don't
From: Fabio Estevam fabio.este...@freescale.com
Similarly as mx25 and mx53, mx6solo-lite needs to setup the MII gasket for RMII
mode.
Add support for mx6solo-lite.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Based on FSL BSP, which uses U-boot 2013.04.
drivers/net/fec_mxc.c |
From: Fabio Estevam fabio.este...@freescale.com
mx6slevk has a SMSC8720 connected in RMII mode.
Add support for it.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Based on FSL BSP, which uses U-boot 2013.04.
arch/arm/cpu/armv7/mx6/clock.c | 30 +
Hi all,
It seems to be all about displays and mux/pad registers for
me these days.
I just tracked down an issue related to commit 87d720e0c that
causes improper display on our RGB displays.
In particular, the pad settings for these two registers lost
their drive-strength value:
Hi Tom,
On Thu, 12 Sep 2013 11:11:16 -0400, Tom Rini tr...@ti.com wrote:
On Thu, Sep 12, 2013 at 03:18:51PM +0200, Albert ARIBAUD wrote:
Hello Tom,
The following changes since commit
68e1747f9c0506159e8ecc9a4feb58e9c65a7b39:
socfpga: Creating driver for Reset Manager
On Thu, Sep 12, 2013 at 03:18:51PM +0200, Albert ARIBAUD wrote:
Hello Tom,
The following changes since commit
68e1747f9c0506159e8ecc9a4feb58e9c65a7b39:
socfpga: Creating driver for Reset Manager (2013-09-06 12:09:06 +0200)
are available in the git repository at:
Wolfgang Denk wd at denx.de writes:
Dear Mateusz,
In message 5123E16B.1060907 at gmail.com you wrote:
Is there anyone that can support me with enforcing GPL compliance on
company that ships product with binary u-boot? Or did that in the past?
We can try.
They're made (branded
On Thu, Sep 12, 2013 at 3:17 PM, Wolfgang Denk w...@denx.de wrote:
Dear Marek Vasut,
In message 201309121605.04824.ma...@denx.de you wrote:
Looking at the code one more time, it'd make most sense to simply allocate
the
buffer NOT on stack, but with some memalign-kind-of call to avoid this
Hi Eric,
On Thu, Sep 12, 2013 at 6:56 PM, Eric Nelson
eric.nel...@boundarydevices.com wrote:
Hi all,
It seems to be all about displays and mux/pad registers for
me these days.
I just tracked down an issue related to commit 87d720e0c that
causes improper display on our RGB displays.
In
Dear Robert Hodaszi,
On 2013-09-12 16:31, Marek Vasut wrote:
Dear Robert Hodaszi,
Please do not top-post.
Memalign should do here with proper rounding. Can you prepare another
patch please?
Best regards,
Marek Vasut
Ok. I will try to do that tomorrow.
Cool, thanks ! Nice
Thanks Stefano,
On 09/12/2013 02:47 AM, Stefano Babic wrote:
Hi Fabio,
CC to Eric and Troy.
On 11/09/2013 23:14, Fabio Estevam wrote:
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c
b/board/freescale/mx6sabresd/mx6sabresd.c
index c832bd9..0f91fe2 100644
---
From: Fabio Estevam fabio.este...@freescale.com
Currently board_eth_init() always return 0, but we should propagate the error
when cpu_eth_init() fails.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
board/freescale/mx6sabresd/mx6sabresd.c | 2 +-
1 file changed, 1 insertion(+),
From: Fabio Estevam fabio.este...@freescale.com
Currently board_eth_init() always return 0, but we should propagate the error
when cpu_eth_init() fails.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
board/freescale/mx6qsabreauto/mx6qsabreauto.c | 2 +-
1 file changed, 1
From: Fabio Estevam fabio.este...@freescale.com
In arch/arm/cpu/arm1136/cpu.c we have:
#ifndef CONFIG_SYS_CACHELINE_SIZE
#define CONFIG_SYS_CACHELINE_SIZE 32
#endif
,so there is no need to define 'CONFIG_SYS_CACHELINE_SIZE' with the default
size in the board config file.
Signed-off-by:
Dear Jiri Prchal,
In message 1378991839-16732-1-git-send-email-jiri.prc...@aksignal.cz you
wrote:
...
+err_spi_setup_slave:
+ if (!is_valid_ether_addr(sernum)) {
+ debug(Using random MAC address\n);
+ eth_random_enetaddr(sernum);
+ }
Pleas change this
On 29 August 2013 02:31, Lukasz Majewski l.majew...@majess.pl wrote:
Hi Minkyu
Dear Lukasz,
On 13/08/13 06:15, Lukasz Majewski wrote:
This commit brings removal of duplicated code for UART IP block
embedded at Samsung SoCs.
New include/asm/samsung-common directory has been created to
Previously, the address of a requested capability is define like that
#define PCI_DCR0x78
But, the addresses of capabilities is different with regard to PCIe revs.
So this method is not flexible.
Now a function to get the address of a requested capability is added and used.
It can
On Thu, Sep 12, 2013 at 7:41 PM, Fabio Estevam feste...@gmail.com wrote:
From: Fabio Estevam fabio.este...@freescale.com
Similarly as mx25 and mx53, mx6solo-lite needs to setup the MII gasket for
RMII
mode.
Add support for mx6solo-lite.
Signed-off-by: Fabio Estevam
From: David Feng feng...@phytium.com.cn
The porting has been merged with arm architecture.
Most architecture codes are placed in
arch/arm/cpu/armv8 directory. Generic board is also
supported after a few bugs are fixed.
u-boot could be running at EL1 or EL2.
Changes for v7:
- Integrate SMC9
From: David Feng feng...@phytium.com.cn
Signed-off-by: David Feng feng...@phytium.com.cn
---
common/fdt_support.c | 66 ++
1 file changed, 34 insertions(+), 32 deletions(-)
diff --git a/common/fdt_support.c b/common/fdt_support.c
index
From: David Feng feng...@phytium.com.cn
Signed-off-by: David Feng feng...@phytium.com.cn
---
common/cmd_pxe.c |4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/common/cmd_pxe.c b/common/cmd_pxe.c
index a2fb50a..df58522 100644
--- a/common/cmd_pxe.c
+++ b/common/cmd_pxe.c
From: David Feng feng...@phytium.com.cn
Signed-off-by: David Feng feng...@phytium.com.cn
---
common/board_f.c | 19 +++
common/board_r.c | 18 ++
2 files changed, 29 insertions(+), 8 deletions(-)
diff --git a/common/board_f.c b/common/board_f.c
index
From: David Feng feng...@phytium.com.cn
Signed-off-by: David Feng feng...@phytium.com.cn
---
MAINTAINERS |4 +
board/armltd/dts/vexpress64.dts | 439 ++
board/armltd/vexpress64/Makefile | 27 +++
From: David Feng feng...@phytium.com.cn
Signed-off-by: David Feng feng...@phytium.com.cn
---
arch/arm/config.mk |4 +
arch/arm/cpu/armv8/Makefile | 38 +
arch/arm/cpu/armv8/cache.S | 130 +
arch/arm/cpu/armv8/cache_v8.c
From: Fabio Estevam fabio.este...@freescale.com
mx6slevk has a SMSC8720 connected in RMII mode.
Add support for it.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Based on FSL BSP, which uses U-boot 2013.04.
Changes since v1:
- Replace access via register + offset style with
Add the missing bang (!) to execute external command, otherwise it does not
work.
Signed-off-by: Axel Lin axel@ingics.com
---
boards.cfg | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/boards.cfg b/boards.cfg
index dbd8479..9fc77fb 100644
--- a/boards.cfg
+++ b/boards.cfg
From: Fabio Estevam fabio.este...@freescale.com
Similarly as mx25 and mx53, mx6solo-lite needs to setup the MII gasket for RMII
mode.
Add support for mx6solo-lite.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Based on FSL BSP, which uses U-boot 2013.04.
Changes since v1:
- None
Hello Eric,
Le 12/09/2013 23:56, Eric Nelson a écrit :
Hi all,
It seems to be all about displays and mux/pad registers for
me these days.
I just tracked down an issue related to commit 87d720e0c that
causes improper display on our RGB displays.
In particular, the pad settings for these two
65 matches
Mail list logo