Remove the last uses of symbol offsets in ARM U-Boot.
Remove some needless uses of _TEXT_BASE.
Remove all _TEXT_BASE definitions.
Signed-off-by: Albert ARIBAUD albert.u.b...@aribaud.net
---
NOTE: this is not intended for inclusion in 2013.10. :)
_TEXT_BASE was only used by ARM to allow
Sometimes a commit should have notes enclosed with it rather
than withing the cover letter -- possibly even because there
is no cover letter. Add 'Series-commit-notes' tag, similar to
'Series-notes'; lines between this tag and the next END line
are inserted in the patch right after the '---'
Remove the last uses of symbol offsets in ARM U-Boot.
Remove some needless uses of _TEXT_BASE.
Remove all _TEXT_BASE definitions.
Signed-off-by: Albert ARIBAUD albert.u.b...@aribaud.net
---
_TEXT_BASE was only used by ARM to allow resolution of
symbol offsets, themselves only needed due to
On Sun, 13 Oct 2013 09:10:28 +0200, Albert ARIBAUD
albert.u.b...@aribaud.net wrote:
Remove the last uses of symbol offsets in ARM U-Boot.
Remove some needless uses of _TEXT_BASE.
Remove all _TEXT_BASE definitions.
Signed-off-by: Albert ARIBAUD albert.u.b...@aribaud.net
---
_TEXT_BASE was
Introduces btrfs file-system to read file from
volume/sub-volumes with btrload command. This
implementation has read-only support.
This btrfs implementation is based on syslinux btrfs
code.
v13: Added pre-calculated crc for BE LE
v11: Mirro super block check.
v10: patch problem
Enable btrfs support in mx53loco config
Signed-off-by: Adnan Ali adnan@codethink.co.uk
---
include/configs/mx53loco.h |4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index a4b610f..bf361a3 100644
---
On Thu, Oct 10, 2013 at 17:37 +0200, Gerhard Sittig wrote:
On Wed, Oct 09, 2013 at 09:07 -0700, djoker wrote:
I have a armv7 board and am looking at the _start symbol address, using
the following command:
*nm u-boot | grep -w _start*
It returned the following:
*6720 T
Hi Albert,
On Sunday, October 13, 2013 9:10:28 AM, Albert ARIBAUD wrote:
Remove the last uses of symbol offsets in ARM U-Boot.
Remove some needless uses of _TEXT_BASE.
Remove all _TEXT_BASE definitions.
Signed-off-by: Albert ARIBAUD albert.u.b...@aribaud.net
---
_TEXT_BASE was only used
Signed-off-by: Daniel Schwierzeck daniel.schwierz...@gmail.com
---
.gitignore | 2 ++
1 file changed, 2 insertions(+)
diff --git a/.gitignore b/.gitignore
index 9069fff..869b1b8 100644
--- a/.gitignore
+++ b/.gitignore
@@ -70,6 +70,8 @@
/reloc_off
/include/generated/
Do not reconfigure the FEC clock during board_eth_init(), otherwise
the FEC might have stability issues, refuse to autonegotiate link
entirely or even corrupt packets while indicating correct checksum
on them. Instead, move the FEC clock init to board_early_init_f(),
where all the other upstream
Hi Benoît,
On Sun, 13 Oct 2013 17:00:25 +0200 (CEST), Benoît Thébaudeau
benoit.thebaud...@advansee.com wrote:
Hi Albert,
On Sunday, October 13, 2013 9:10:28 AM, Albert ARIBAUD wrote:
Remove the last uses of symbol offsets in ARM U-Boot.
Remove some needless uses of _TEXT_BASE.
Remove
Hi,
CCing Alexandre and Hector. Can you test please?
Do not reconfigure the FEC clock during board_eth_init(), otherwise
the FEC might have stability issues, refuse to autonegotiate link
entirely or even corrupt packets while indicating correct checksum
on them. Instead, move the FEC clock
Dear Lukasz Majewski,
On Sat, 12 Oct 2013 15:47:14 +0800
Bo Shen voice.s...@atmel.com wrote:
If won't pass value to dfu-r_left, it always 0, make no transfer,
the dfu-util on host side report failed. So, before starting transfer,
pass the value, then nand uploading can work.
Hello Wolfgang Denk,
On Sat, Oct 12, 2013 at 11:38 AM, Wolfgang Denk w...@denx.de wrote:
Dear Suriyan Ramasami,
In message 1381366918-17590-1-git-send-email-suriya...@gmail.com you wrote:
multiple definitions of `_u_boot_list_2_cmd_2_ls' if CONFIG_CMD_JFFS2
and CONFIG_CMD_FS_GENERIC are
From: David Feng feng...@phytium.com.cn
Signed-off-by: David Feng feng...@phytium.com.cn
Signed-off-by: Bhupesh Sharma bhupesh.sha...@freescale.com
---
board/armltd/vexpress64/Makefile | 27 +
board/armltd/vexpress64/vexpress64.c | 50 +
boards.cfg |
Hi, Albert:
Thanks !
I used cmd git clone git://git.denx.de/u-boot.git to get the master
source code.
Best wishes,
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signed-off-by: Luka Perkov l...@openwrt.org
---
include/configs/ib62x0.h | 37 -
1 file changed, 20 insertions(+), 17 deletions(-)
diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h
index 7fa0c53..90ed0fb 100644
--- a/include/configs/ib62x0.h
+++
On Sun, Oct 13, 2013 at 11:38 PM, Luka Perkov l...@openwrt.org wrote:
Signed-off-by: Luka Perkov l...@openwrt.org
---
include/configs/ib62x0.h | 37 -
1 file changed, 20 insertions(+), 17 deletions(-)
diff --git a/include/configs/ib62x0.h
Hi tiger...@viatech.com.cn,
On Mon, 14 Oct 2013 10:14:44 +0800, tiger...@viatech.com.cn wrote:
Hi, Albert:
Thanks !
I used cmd git clone git://git.denx.de/u-boot.git to get the master
source code.
My apologies: I though you had meant how to get the submission to go
into mainline, while you
Hi, Albert:
My apologies: I though you had meant how to get the submission to go
into mainline, while you actually meant how to get accepted
submissions locally.
Let me just add that if you want to (ir)regularly find out which code
has been accepted into mainline, there is no need to re-clone the
Hello Bo,
Am 12.10.2013 09:18, schrieb Bo Shen:
Hi All,
Now I am implementing DFU support on Atmel sama5d3xek board, when try to
download rootfs image to NAND flash through DFU, we need to drop ffs from
rootfs image.
Do you use ubi or jffs2?
In dfu_nand.c when it call
Hello Jens,
Am 24.09.2013 09:41, schrieb Jens Scharsig:
Hello Heiko,
Hello Jens,
I have a access violation problem with i2c_reloc_fixup on coldfire
m68k systems.
I found out, the i2c_reloc_fixup tries to relocate the adapter itself,
but at this time i2c_adap_p is already relocated.
Which
22 matches
Mail list logo
