Hello Lukasz,
Am 14.03.2014 11:47, schrieb Lukasz Majewski:
Hi Heiko,
on nand flash using ubi, after the download of the new image into
the flash, the "rest" of the nand sectors get erased while flushing
the medium. With current u-boot version dfu-util may show:
Starting download:
[##
On 03/14/2014 09:27 PM, Tom Rini wrote:
> On Thu, Mar 13, 2014 at 03:52:48PM +0100, Michal Simek wrote:
>
>> Connect FPGA version with appropriate operations
>> to remove huge switch-cases for every FPGA family.
>> Tested on Zynq. Spartan2/Spartan3/Virtex2 just compile test.
>>
>> Signed-off-by: M
Dear tiger...@via-alliance.com,
In message you
wrote:
>
> >Relocation will always happen, and there is no provision for avoiding
> >it.
...
> Then no relocation, it seemed OK.
You used the correct phrase: it seemed. Except that you broke a
number of really important things. If you do not unde
Hi, Albert:
>Relocation will always happen, and there is no provision for avoiding
>it.
I have ever tried to del these code in crt0.S :
ldr sp, [r8, #GD_START_ADDR_SP] /* r8 =
gd->start_addr_sp */
bic sp, sp, #7 /* 8-byte alignment for ABI compliance
*/
ldr
Hi,
On 15 March 2014 21:39, JYOTI DUBEY wrote:
>
> Can somebody inform me what all changes I need to make in U-boot 2013
> source code to enable secure booting?
Please can you provide more details?
- What board?
- What docs have you already read?
- Did you look at the settings in sandbox?
- Wh
On Mon, Mar 17, 2014 at 4:38 AM, Ian Campbell wrote:
> On Fri, 2014-03-14 at 17:36 +0200, Pantelis Antoniou wrote:
>> [...]
>
> Thanks for your review. It seems there are still quite a few issues
> dating back to the original allwinner dumps here.
>
> @linux-sunxi: if anyone wants to volunteer to
From: Fabio Estevam
CONFIG_BOOT_INTERNAL is not used anywhere, so let's remove it.
Signed-off-by: Fabio Estevam
---
include/configs/woodburn_sd.h | 2 --
1 file changed, 2 deletions(-)
diff --git a/include/configs/woodburn_sd.h b/include/configs/woodburn_sd.h
index 10e1d17..437472f 100644
---
On Fri, 2014-03-14 at 17:36 +0200, Pantelis Antoniou wrote:
> [...]
Thanks for your review. It seems there are still quite a few issues
dating back to the original allwinner dumps here.
@linux-sunxi: if anyone wants to volunteer to help cleanup this
particular driver I'd be very happy -- there's
On Sun, 2014-03-16 at 14:53 +0100, Hans de Goede wrote:
> There is no way to reset the cpu, so use the watchdog for this.
The sunxi.git tree does this by calling watchdog_set(0). I think it
would be better to introduce the generic watchdog support and the add
this a patch to use it for reset. Unle
On Sun, 2014-03-16 at 14:53 +0100, Hans de Goede wrote:
> mctl_ddr3_reset() should not be called here for sun7i, at least the
> u-boot-sunxi sources don't do this.
oops, I misread an ifndef. I'll fold in, thanks.
Ian.
___
U-Boot mailing list
U-Boot@li
On Sun, 2014-03-16 at 15:19 +, Ian Campbell wrote:
> On Fri, 2014-03-14 at 15:03 -0400, Tom Rini wrote:
> > On 03/14/2014 02:50 PM, Hans de Goede wrote:
> > > Hi,
> > >
> > > On 03/14/2014 03:17 PM, Tom Rini wrote:
> > >> On Fri, Mar 14, 2014 at 10:33:50AM +, Ian Campbell wrote:
> > >>
> >
On Sun, 2014-03-16 at 16:15 +0100, Hans de Goede wrote:
> Hi,
>
> On 03/16/2014 04:05 PM, Ian Campbell wrote:
> > On Sun, 2014-03-16 at 14:53 +0100, Hans de Goede wrote:
> >> Hi All,
> >>
> >> Here is a patch-set adding sun4i support on top of Ian's recent 1st
> >> attempt to get sun7i upstream pa
On Fri, 2014-03-14 at 15:03 -0400, Tom Rini wrote:
> On 03/14/2014 02:50 PM, Hans de Goede wrote:
> > Hi,
> >
> > On 03/14/2014 03:17 PM, Tom Rini wrote:
> >> On Fri, Mar 14, 2014 at 10:33:50AM +, Ian Campbell wrote:
> >>
> >>> Based linux-sunxi#sunxi commit d854c4de2f57 "arm: Handle .gnu.hash
Hi,
On 03/16/2014 04:05 PM, Ian Campbell wrote:
> On Sun, 2014-03-16 at 14:53 +0100, Hans de Goede wrote:
>> Hi All,
>>
>> Here is a patch-set adding sun4i support on top of Ian's recent 1st
>> attempt to get sun7i upstream patch-set.
>>
>> Note I've had to drop the raising of the cpu core clock,
On Fri, 2014-03-14 at 10:22 -0400, Tom Rini wrote:
> On Fri, Mar 14, 2014 at 11:28:06AM +, Ian Campbell wrote:
> > On Fri, 2014-03-14 at 19:11 +0800, Chen-Yu Tsai wrote:
> [snip]
> > > I think you should keep them in the same patch. You can then
> > > just add the appropriate config options whe
On Sun, 2014-03-16 at 14:53 +0100, Hans de Goede wrote:
> Hi All,
>
> Here is a patch-set adding sun4i support on top of Ian's recent 1st
> attempt to get sun7i upstream patch-set.
>
> Note I've had to drop the raising of the cpu core clock, without matching
> axp209 changes this causes issues on
Hi,
On 03/16/2014 02:53 PM, Hans de Goede wrote:
Woops I forgot to add a commit msg here, I've jut fixed this locally:
Based linux-sunxi#sunxi commit d854c4de2f57 "arm: Handle .gnu.hash section
in
ldscripts" vs v2014.01.
As well as the following signed-off-by the sunxi branch shows
Signed-off-by: Hans de Goede
---
arch/arm/cpu/armv7/sunxi/board.c| 2 +-
arch/arm/cpu/armv7/sunxi/clock.c| 2 +
arch/arm/cpu/armv7/sunxi/cpu_info.c | 7 ++
arch/arm/cpu/armv7/sunxi/dram.c | 129
board/sunxi/Makefile| 3 +-
b
There is no way to reset the cpu, so use the watchdog for this.
Signed-off-by: Hans de Goede
---
arch/arm/cpu/armv7/sunxi/board.c| 7 +++
arch/arm/include/asm/arch-sunxi/timer.h | 4
2 files changed, 11 insertions(+)
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/
We should not be raising the cpu core frequency until we have pmic support
in place.
Signed-off-by: Hans de Goede
---
board/sunxi/board.c | 10 --
1 file changed, 10 deletions(-)
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 5dbcf2a..cc3083c 100644
--- a/board/sunxi/board
Hi All,
Here is a patch-set adding sun4i support on top of Ian's recent 1st
attempt to get sun7i upstream patch-set.
Note I've had to drop the raising of the cpu core clock, without matching
axp209 changes this causes issues on sun4i.
I've been thinking about how to best move forward with this p
mctl_ddr3_reset() should not be called here for sun7i, at least the
u-boot-sunxi sources don't do this.
Signed-off-by: Hans de Goede
---
arch/arm/cpu/armv7/sunxi/dram.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c
index 81b1
Hi,
On 16.03.2014 11:42, armdev wrote:
Dear Michael,
Thanks for taking out time to extend help.
As per the RefManual the UART is taking the SCLK_UART Clock and as there are 4
channels (4 UARTS).
Following is from the public exynos 5250 manual
(http://www.samsung.com/global/business/semicondu
On Fri, 2014-03-14 at 10:17 -0400, Tom Rini wrote:
> On Fri, Mar 14, 2014 at 10:33:47AM +, Ian Campbell wrote:
> > +/*
> > + * Size of malloc() pool
> > + * 1MB = 0x10, 0x10 = 1024 * 1024
> > + */
> > +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
>
> This i
Hi,
On 14.03.2014 09:04, armdev wrote:
Hi,
We are trying to enable the UART3 on COM18 pins of arndale board. The UART3 RXD
and TXD are on pins 2 and 4 which as per the base board specification is
connected as
XuRXD3 : UART_3_RXD/GPA1[4] : 2
XuTXD3 : UART_3_TXD/GPA1[5] : 4
As per the public
Dear Michael,
Thanks for taking out time to extend help.
As per the RefManual the UART is taking the SCLK_UART Clock and as there are 4
channels (4 UARTS).
Following is from the public exynos 5250 manual
(http://www.samsung.com/global/business/semiconductor/file/product/Exynos_5_Dual_User_Manau
Hi
On Sun, Mar 16, 2014 at 11:07 AM, armdev wrote:
> Dear Michael,
> Yep didn't got any prints. So tried a hack.
> a) Booted using uart 2
> b) set the GPACON
> c) Copied the config from 0x12c2 to 0x12c3
> d)tried to write a char 0x41 (A) on 0x12c20020 0x12c30020, I got output on
> UART2
Dear Michael,
Yep didn’t got any prints. So tried a hack.
a) Booted using uart 2
b) set the GPACON
c) Copied the config from 0x12c2 to 0x12c3
d)tried to write a char 0x41 (A) on 0x12c20020 0x12c30020, I got output on
UART2 but not on UART3.
We would like to use both uarts.
Have you used
Hi
On Fri, Mar 14, 2014 at 9:04 AM, armdev wrote:
> Hi,
>
> We are trying to enable the UART3 on COM18 pins of arndale board. The UART3
> RXD and TXD are on pins 2 and 4 which as per the base board specification is
> connected as
>
> XuRXD3 : UART_3_RXD/GPA1[4] : 2
> XuTXD3 : UART_3_TXD/GPA1[5]
Please can someone help
On 14-Mar-2014, at 1:34 pm, armdev wrote:
> Hi,
>
> We are trying to enable the UART3 on COM18 pins of arndale board. The UART3
> RXD and TXD are on pins 2 and 4 which as per the base board specification is
> connected as
>
> XuRXD3 : UART_3_RXD/GPA1[4] : 2
> XuTXD3 :
On Sunday 16 Mar 2014 09:06:10 Wolfgang Denk wrote:
>
> > I was wondering why if I try to set ethaddr as part of
> > CONFIG_EXTRA_ENV_SETTINGS it is not there when I boot the board.
>
> This would define it only in the default environment (and doing this is
> strongly deprecated and will never
Dear Benedict Hewson,
In message <4458778.Fr6NCEssuz@desktop1> you wrote:
>
> yes using setenv ethaddr and setenv ipaddr allows me to ping other computers
> and to ping the board.
Good.
> I was wondering why if I try to set ethaddr as part of
> CONFIG_EXTRA_ENV_SETTINGS it is not there when I
The aligned buffer is always with a higher address, so copying should run
from the end of the buffer to the beginning, and not the other way around.
Signed-off-by: Eli Billauer
---
drivers/fpga/zynqpl.c |5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/fpga/zyn
On Fri, 2014-03-14 at 15:17 -0500, Dennis Gilmore wrote:
> On Fri, 14 Mar 2014 10:16:42 -0400
> Tom Rini wrote:
>
> > On Fri, Mar 14, 2014 at 10:33:32AM +, Ian Campbell wrote:
> >
> > > Hi,
> > >
> > > This is my first cut at an upstreamable series based upon the
> > > https://github.com/li
On Saturday 15 Mar 2014 16:59:05 Fabio Estevam wrote:
> On Sat, Mar 15, 2014 at 4:08 AM, Benedict Hewson
>
> wrote:
> > In the fec_get_hwaddr() function I have printed out the values returned by
> > imx_get_mac_from_fuse() and they are all 0.
> >
> > I have read in the README.imx6 file that the
35 matches
Mail list logo
