Hi Wolfgang,
On 01/12/2015 08:27 AM, Stefan Roese wrote:
Hi Wolfgang,
On 12.01.2015 08:17, Wolfgang Denk wrote:
The new code is even simpler and copies the source data into the temp
buffer and now uses the temp buffer to write the complete sector. So
only one SPI sector write is used now inste
Hi Stefan,
On 01/12/2015 08:56 AM, Stefan Roese wrote:
Hi Gerlando,
On 12.01.2015 08:51, Gerlando Falauto wrote:
thanks for the patch.
Please compare it with my v1 revision of the patch:
http://patchwork.ozlabs.org/patch/150468/
Back then, Simon suggested to use two separate SPI flash operatio
On Sun, Jan 11, 2015 at 5:31 PM, Ian Campbell wrote:
> On Sun, 2015-01-11 at 09:48 +0800, Chen-Yu Tsai wrote:
>> This removes an extra whitespace introduced in an earlier commit
>> a474d11 ("sun8i: Add dram initialization support").
>>
>> Signed-off-by: Chen-Yu Tsai
> Acked-by: Ian Campbell
>
>>
Initial version for mx6sx SABREAUTO board support with features:
PMIC, QSPI, NAND flash, SD/MMC, USB, Ethernet, I2C, IO Expander.
Signed-off-by: Ye.Li
---
arch/arm/Kconfig|5 +
board/freescale/mx6sxsabreauto/Kconfig | 15 +
board/freescale/mx6sxsabr
The mx6sx has two ENET controllers, some board like mx6sxsabreauto
uses the ENET2 for ethernet. So add ENET2 support to soc level,
including: ENET2 clock enable and MAC address fuse for ENET2.
Signed-off-by: Ye.Li
---
arch/arm/cpu/armv7/mx6/clock.c |9 -
arch/arm/cpu/armv7/
The I2C SDA and SCL require the IOMUX SION bit set to get input signal.
Signed-off-by: Ye.Li
---
arch/arm/include/asm/arch-mx6/mx6sx_pins.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx6/mx6sx_pins.h
b/arch/arm/include/asm/arch-mx6/mx6s
Hello Akshay,
On 01/09/2015 10:21 AM, Akshay Saraswat wrote:
Hi Przemyslaw,
This commit allows for test i2c drivers with new i2c api
on Exynos5xxx based boards.
The S3C24X0 I2C driver supports driver model I2C api,
but i2c peripherials drivers on exynos5 boards doesn't.
So this commit allows
On mx6sx, the CCM register bits for GPMI are different as other
mx6 platforms. Modify the GPMI clock function to support mx6sx.
Signed-off-by: Ye.Li
---
arch/arm/cpu/armv7/mx6/clock.c | 12
1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/armv7/mx6/cloc
+ fixed address to Sjoerd Simons.
On 01/12/2015 10:19 AM, Przemyslaw Marczak wrote:
Hello Akshay,
On 01/09/2015 10:21 AM, Akshay Saraswat wrote:
Hi Przemyslaw,
This commit allows for test i2c drivers with new i2c api
on Exynos5xxx based boards.
The S3C24X0 I2C driver supports driver model I
Since a clock function setup_gpmi_io_clk is implemented for GPMI
IO clock settings, change to use this common function in GPMI setup.
Signed-off-by: Ye.Li
---
board/freescale/mx6qsabreauto/mx6qsabreauto.c | 25 ++---
1 files changed, 2 insertions(+), 23 deletions(-)
diff -
On 10/01/15 12:34, Otavio Salvador wrote:
> On Fri, Jan 9, 2015 at 9:35 PM, Wally Yeh
>> wrote:
> I think u-boot-fslc is support i.mx6q very well now, it booting into
> kernel only spend 0.3~0.5s.
>
> If you have question which i.mx related, maybe you can also send mail
> to meta-freescale to as
Hi Hans, Ian,
This series enables the VGA output on the Hummingbird A31. The VGA output
is driven from LCD0, through an external DAC that's powered up by toggling
pin PH25.
Patch 1 allows selecting CONFIG_VIDEO_VGA_VIA_LCD on sun6i and sun8i.
These 2 platforms do not have builtin TV encoders, and
Using an external DAC for VGA output was available on sun5i. Since
some other SoCs don't have a builtin TV encoder, but might have
use for a VGA output, enable the option for the platforms that
don't have TV encoders.
Signed-off-by: Chen-Yu Tsai
---
board/sunxi/Kconfig | 2 +-
1 file changed, 1
The Hummingbird A31 uses an external DAC connected to the LCD0 outputs
for the on board VGA output. The DAC has a power control that's toggled
by GPIO.
Signed-off-by: Chen-Yu Tsai
---
configs/Hummingbird_A31_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/Hummingbird_A31_
The external DAC for VGA output might have either a power or reset
control pin that needs to be pulled up, as is the case on the
Hummingbird A31.
Signed-off-by: Chen-Yu Tsai
---
board/sunxi/Kconfig | 8
drivers/video/sunxi_display.c | 18 ++
2 files changed, 2
-- Forwarded message --
From: Bin Meng
Date: Sat, Jan 3, 2015 at 8:15 PM
Subject: Re: [U-Boot] Fwd: coreboot uboot qemu x86
To: Ajoy Das
Cc: U-Boot Mailing List , Simon Glass <
s...@chromium.org>
Hi Ajoy,
On Sat, Jan 3, 2015 at 12:42 AM, Ajoy Das wrote:
>
> -- Forwarde
Hi,
On 12-01-15 11:02, Chen-Yu Tsai wrote:
Hi Hans, Ian,
This series enables the VGA output on the Hummingbird A31. The VGA output
is driven from LCD0, through an external DAC that's powered up by toggling
pin PH25.
Thanks for working on this!
Patch 1 allows selecting CONFIG_VIDEO_VGA_VIA_L
Hi,
On 12-01-15 11:02, Chen-Yu Tsai wrote:
The external DAC for VGA output might have either a power or reset
control pin that needs to be pulled up, as is the case on the
Hummingbird A31.
Signed-off-by: Chen-Yu Tsai
---
board/sunxi/Kconfig | 8
drivers/video/sunxi_displ
On Mon, Jan 12, 2015 at 7:48 AM, Ian Molton wrote:
> On 10/01/15 12:34, Otavio Salvador wrote:
>> On Fri, Jan 9, 2015 at 9:35 PM, Wally Yeh
>>> wrote:
>
>> I think u-boot-fslc is support i.mx6q very well now, it booting into
>> kernel only spend 0.3~0.5s.
>>
>> If you have question which i.mx re
Hi Ye.Li,
On 01/12/2015 10:46 AM, Ye.Li wrote:
The I2C SDA and SCL require the IOMUX SION bit set to get input signal.
Signed-off-by: Ye.Li
---
arch/arm/include/asm/arch-mx6/mx6sx_pins.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx
Hi,
On 10-01-15 11:50, Ian Campbell wrote:
On Fri, 2015-01-09 at 13:13 +0200, Siarhei Siamashka wrote:
If yes then I think it is confusing to modify this comment, and the
comment before the pre-console #defines should mention that the buffer
is boottime only/short lived etc.
Just in case if s
On Mon, Jan 12, 2015 at 6:19 PM, Hans de Goede wrote:
> Hi,
>
>
> On 12-01-15 11:02, Chen-Yu Tsai wrote:
>>
>> The external DAC for VGA output might have either a power or reset
>> control pin that needs to be pulled up, as is the case on the
>> Hummingbird A31.
>>
>> Signed-off-by: Chen-Yu Tsai
Hi,
On Mon, Jan 12, 2015 at 6:18 PM, Hans de Goede wrote:
> Hi,
>
> On 12-01-15 11:02, Chen-Yu Tsai wrote:
>>
>> Hi Hans, Ian,
>>
>> This series enables the VGA output on the Hummingbird A31. The VGA output
>> is driven from LCD0, through an external DAC that's powered up by toggling
>> pin PH25.
Hi,
On 08-01-15 08:02, Siarhei Siamashka wrote:
Currently the pre-console buffer can accumulate early log messages
and flush them to the serial console as soon as it becomes available.
This patch just adds one more pre-console buffer flushing point and
does all the same for the other consoles t
The number of supported serdes protocols on Freescale SoCs
has increased over time. Until now, an u64 variable have been
initialized on boot with the configured protocols. However,
since this number has increased (enum srds_prtcl has more
than 64 values), 64 bits are no longer sufficient to hold tr
This patches add support for VSC9953, a Vitesse L2 Switch IP which is
integrated in the T1040/T1020 Freescale SoCs.
About Device:
=
The Seville Gigabit Ethernet switch core contains eight 10/100/1000 Mbps
Ethernet ports and two 10/100/1000/2500 Mbps ports. It provides a rich set of
U-boot assumes that all FMAN ports have a PHY. Some SoCs (like T1040)
have fixed links. This means that the ports are connected MAC to MAc
and there is no Ethernet PHY attatched. This patch initializes a
FMAN MAC even if it doesn't have a PHY attached.
Signed-off-by: Codrin Ciubotariu
---
Change
Some Freescale SoCs like T1020 and T1040 have an integrated
L2 Switch. The L2 Switch ports may be connected to Ethernet PHYs
over SGMII and QSGMII.
Signed-off-by: Codrin Ciubotariu
---
Changes for v2:
- split a bug fix regarding Freescale SerDes protocols
into a different patch;
Signed-off-by: Codrin Ciubotariu
---
Changes for v2: None
Changes for v3:
- Removed "Change-id" line from comment;
board/freescale/t1040qds/eth.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/board/freescale/t1040qds/eth.c b/board/freescale/t1040qds/eth.c
index 06d9086..c6fc146 1
T1040 and T1020 are two Freescale SoCs with an integrated
VSC9953 Gigabit L2 Switch. This patch initializes this L2
switch on boards with T1040 and T1020.
Signed-off-by: Codrin Ciubotariu
---
Changes for v2:
- added patch description;
Changes for v3:
- Removed "Change-id" line f
If SerDes is configured to connect L2 Switch ports from T1040
over SGMII or QSGMII, the two FMAN fixed ports (FM1@DTSEC1 and FM2@DTSEC2)
that are connected to two L2 swtch ports must be enabled. These
ports don't have PHYs and must be treated accordingly.
Signed-off-by: Codrin Ciubotariu
---
Cha
Freescale's T1040qds board may be configured to have up to
5 FMAN ports (FM1@DTSEC1 to FM1@DTSEC5). From these 5 ports,
2 of them may be fixed-links (FM1@DTSEC1 annd FM1@DTSEC2),
connected to other two ports from an intergrated
VSC9953 L2 Switch (switch ports 8 and 9). These fixed-link
ports have n
Freescale's T1040qds board may be configured to have up to
5 FMAN ports (FM1@DTSEC1 to FM1@DTSEC5). From these 5 ports,
2 of them may be fixed-links (FM1@DTSEC1 annd FM1@DTSEC2),
connected to other two ports from an intergrated
VSC9953 L2 Switch (switch ports 8 and 9). These fixed-link
ports have n
This patch configures and initializes the L2 switch on T1040QDS board.
The L2 switch ports must be initialized according to the SerDes
protocols.
Signed-off-by: Codrin Ciubotariu
---
Changes for v2: None
Changes for v3:
- Removed "Change-id" line from comment;
board/freescale/t1040qds
This patch configures and initializes the L2 switch on T1040rdb board.
The external L2 switch ports may be connected to PHYs only over
QSGMII, for T1040rdb.
Signed-off-by: Codrin Ciubotariu
---
Changes for v2: None
Changed for v3:
- Removed "Change-id" line from comment;
board/freesca
This patch adds a driver for VSC9953 L2 Switch. This Vitesse IP
is integrated in Freescale T1040 and T1020 SoCs.
The L2 switch has 10 Ethernet ports: 2 internal fixed-links
(ports 8 and 9) at 2.5 Gbps and and 8 external ports at 1 Gbps.
The external ports may be connected to PHYs over QSGMII and SG
On Mon, Jan 12, 2015 at 12:05:57PM +0100, Hans de Goede wrote:
> Hi,
>
> On 08-01-15 08:02, Siarhei Siamashka wrote:
> >Currently the pre-console buffer can accumulate early log messages
> >and flush them to the serial console as soon as it becomes available.
> >
> >This patch just adds one more p
On Monday, January 12, 2015 at 06:26:24 AM, Ramneek Mehresh wrote:
> > -Original Message-
> > From: Marek Vasut [mailto:ma...@denx.de]
> > Sent: Thursday, December 18, 2014 4:46 PM
> > To: u-boot
> > Cc: Mehresh Ramneek-B31383
> > Subject: Re: Regarding patch: http://patchwork.ozlabs.org/pa
Hi,
On 12-01-15 14:30, Tom Rini wrote:
On Mon, Jan 12, 2015 at 12:05:57PM +0100, Hans de Goede wrote:
Hi,
On 08-01-15 08:02, Siarhei Siamashka wrote:
Currently the pre-console buffer can accumulate early log messages
and flush them to the serial console as soon as it becomes available.
This
Hi,
On 11 January 2015 at 20:45, Joonyoung Shim wrote:
> On 01/12/2015 10:45 AM, Jaehoon Chung wrote:
>> On 01/11/2015 02:46 AM, Simon Glass wrote:
>>> Hi,
>>>
>>>
>>> On 9 January 2015 at 23:53, Joonyoung Shim wrote:
On 01/09/2015 08:13 PM, Jaehoon Chung wrote:
> On 01/09/2015 04:31 PM
SILK is an entry level development board based on R-Car E2 SoC (R8A7794)
This commit supports the following peripherals:
- SCIF, I2C, Ethernet, QSPI, MMC, USB Host
Signed-off-by: Vladimir Barinov
---
arch/arm/cpu/armv7/rmobile/Kconfig | 6 +-
board/renesas/silk/Kconfig | 12 +
board/
A cache flush is required when an image is extracted that is required on
another core.
Signed-off-by: Pieter Voorthuijsen
---
common/cmd_ximg.c |2 ++
1 file changed, 2 insertions(+)
diff --git a/common/cmd_ximg.c b/common/cmd_ximg.c
index ae2714d..64b9186 100644
--- a/common/cmd_ximg.c
+
Hi Przemyslaw,
>Hello Akshay,
>
>On 01/09/2015 10:21 AM, Akshay Saraswat wrote:
>> Hi Przemyslaw,
>>
>>> This commit allows for test i2c drivers with new i2c api
>>> on Exynos5xxx based boards.
>>>
>>> The S3C24X0 I2C driver supports driver model I2C api,
>>> but i2c peripherials drivers on exynos
This patch enables U-Boot to modify the MAC address of the AX88179.
Tested on RECS5250 (similar to Arndale5250)
Signed-off-by: Rene Griessl
---
Changes for v2:
- removed memcpy
drivers/usb/eth/asix88179.c | 14 ++
1 file changed, 14 insertions(+)
diff --git a/drivers/usb/
On Monday, January 12, 2015 at 05:51:16 PM, Rene Griessl wrote:
> This patch enables U-Boot to modify the MAC address of the AX88179.
> Tested on RECS5250 (similar to Arndale5250)
>
> Signed-off-by: Rene Griessl
> ---
>
> Changes for v2:
> - removed memcpy
Hi!
what was the reason for the
Am 12.01.2015 um 17:54 schrieb Marek Vasut:
On Monday, January 12, 2015 at 05:51:16 PM, Rene Griessl wrote:
This patch enables U-Boot to modify the MAC address of the AX88179.
Tested on RECS5250 (similar to Arndale5250)
Signed-off-by: Rene Griessl
---
Changes for v2:
- removed memcpy
On 01/11/2015 11:15 AM, Tom Rini wrote:
On Sun, Jan 11, 2015 at 10:54:03AM -0700, Stephen Warren wrote:
On 01/11/2015 02:45 AM, Ian Campbell wrote:
On Sun, 2014-12-28 at 09:26 +, Ian Campbell wrote:
+boot_scripts:
+
+ The name of U-Boot style boot.scr files that $bootcmd searches for.
+
+
On 01/10/2015 11:44 AM, Dennis Gilmore wrote:
On Mon, 05 Jan 2015 12:55:46 -0700
Stephen Warren wrote:
On 12/28/2014 03:09 AM, Ian Campbell wrote:
On Mon, 2014-12-22 at 13:46 -0700, Stephen Warren wrote:
[...]
+
+The U-Boot "syslinux" and "pxe boot" commands require a number of
environment +
On 01/10/2015 11:27 AM, Dennis Gilmore wrote:
On Tue, 06 Jan 2015 17:43:19 -0700
Stephen Warren wrote:
(CCing Dennis so he can comment from a distro perspective re:
partition table bootable flags v.s. scanning all partitions)
On 01/06/2015 10:07 AM, Sjoerd Simons wrote:
On Mon, 2015-01-05 at
On Monday, January 12, 2015 at 06:07:27 PM, René Griessl wrote:
> Am 12.01.2015 um 17:54 schrieb Marek Vasut:
> > On Monday, January 12, 2015 at 05:51:16 PM, Rene Griessl wrote:
> >> This patch enables U-Boot to modify the MAC address of the AX88179.
> >> Tested on RECS5250 (similar to Arndale5250)
On Mon, 2015-01-12 at 10:34 -0700, Stephen Warren wrote:
> On 01/11/2015 11:15 AM, Tom Rini wrote:
> > On Sun, Jan 11, 2015 at 10:54:03AM -0700, Stephen Warren wrote:
> >> On 01/11/2015 02:45 AM, Ian Campbell wrote:
> >>> On Sun, 2014-12-28 at 09:26 +, Ian Campbell wrote:
> > +boot_scripts:
On Mon, Jan 12, 2015 at 11:37 AM, Marek Vasut wrote:
>
> On Monday, January 12, 2015 at 06:07:27 PM, René Griessl wrote:
> > Am 12.01.2015 um 17:54 schrieb Marek Vasut:
> > > On Monday, January 12, 2015 at 05:51:16 PM, Rene Griessl wrote:
> > >> This patch enables U-Boot to modify the MAC address
On Mon, 12 Jan 2015 10:42:27 -0700
Stephen Warren wrote:
> On 01/10/2015 11:27 AM, Dennis Gilmore wrote:
> > On Tue, 06 Jan 2015 17:43:19 -0700
> > Stephen Warren wrote:
> >
> >> (CCing Dennis so he can comment from a distro perspective re:
> >> partition table bootable flags v.s. scanning all p
On 01/12/2015 10:57 AM, Ian Campbell wrote:
On Mon, 2015-01-12 at 10:34 -0700, Stephen Warren wrote:
On 01/11/2015 11:15 AM, Tom Rini wrote:
On Sun, Jan 11, 2015 at 10:54:03AM -0700, Stephen Warren wrote:
On 01/11/2015 02:45 AM, Ian Campbell wrote:
On Sun, 2014-12-28 at 09:26 +, Ian Campb
On Mon, 2015-01-12 at 17:57 +, Ian Campbell wrote:
> On Mon, 2015-01-12 at 10:34 -0700, Stephen Warren wrote:
> > * boot.scr must be generated (to boot.scr.uimg) using
> > bootloader-specific tools, rather than extlinux.conf, grub.conf, ... all
> > just need the generation of a text file.
>
On Mon, Dec 15, 2014 at 12:07:52PM -0800, Kevin Hilman wrote:
> From: Kevin Hilman
>
> When CONFIG_TRACE is disabled, linking fails with:
>
> common/built-in.o:(.data.init_sequence_f+0x8): undefined reference to
> `trace_early_init'
>
> To fix, wrap trace init calls with #ifdef CONFIG_TRACE.
On Fri, Dec 19, 2014 at 02:19:07PM +0900, Masahiro Yamada wrote:
> This commit fixes warnings reported by tools/genboardscfg.py.
>
> Signed-off-by: Masahiro Yamada
> Cc: Vikas Manocha
> Acked-by: Vikas Manocha
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital sig
On Fri, Dec 19, 2014 at 02:20:58PM +0900, Masahiro Yamada wrote:
> Commit 1e4ad74b875f (beagle_x15: add board support for Beagle x15)
> missed to add board/ti/beagle_x15/MAINTAINERS.
>
> Signed-off-by: Masahiro Yamada
> Cc: Felipe Balbi
Applied to u-boot/master, thanks!
--
Tom
signature.as
On Fri, Dec 19, 2014 at 02:27:13PM +0900, Masahiro Yamada wrote:
> - "string" type for SYS_* is defined in arch/Kconfig
> - SYS_CPU "armv7" has been replaced with "select CPU_V7"
> - SYS_SOC "tegra124" is already defined in tegra124/Kconfig
>
> Signed-off-by: Masahiro Yamada
> Acked-by: Bo She
On Thu, Jan 08, 2015 at 10:11:40AM +0100, Pali Rohár wrote:
> Since commit 41623c91b09a0c865fab41acdaff30f060f29ad6 u-boot running in qemu
> is
> crashing in function do_omap3_emu_romcode_call(). RX-51 board uses this
> function
> for Cortex-A8 errata 430973 workaround (Set IBE bit in ACR) which
On Sun, Dec 28, 2014 at 02:09:50PM +0100, Stefan Herbrechtsmeier wrote:
> Signed-off-by: Stefan Herbrechtsmeier
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http:
On Fri, Jan 09, 2015 at 03:42:51PM -0600, Peter Tyser wrote:
> Add Peter Tyser as the maintainer of Extreme Engineering Solutions products.
>
> Signed-off-by: Peter Tyser
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
__
On Sun, Dec 28, 2014 at 02:09:51PM +0100, Stefan Herbrechtsmeier wrote:
> Signed-off-by: Stefan Herbrechtsmeier
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http:
On Fri, Jan 09, 2015 at 03:42:50PM -0600, Peter Tyser wrote:
> From: John Schmoller
>
> Convert Extreme Engineering Solutions products to use generic board
> support.
>
> Signed-off-by: John Schmoller
> Signed-off-by: Peter Tyser
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Des
Hey all,
I've pushed v2015.01 out to the repository and tarballs should exist
soon.
As v2014.10 was our first release with Kconfig, v2015.01 is when we've
started migrating things from include/configs/* and into Kconfig files
for real. We've got a way to go but I want to thank people for pushing
Hey all,
As I said in the release email, but spelling out here as well, I plan to
drop boards that have not been converted to CONFIG_SYS_GENERIC_BOARD
after the release of v2015.04-rc1, which gives this merge window for
them to get fixed up. Thanks all!
--
Tom
signature.asc
Description: Digit
Apologies for the long delay, this is v2 of the series of patches that creates
a generic PSCI v0.2 framework for ARMv8.
The first 3 patches refactor existing code so that ARMv7 PSCI,
ARMv8 spin-table and ARMv8 PSCI can coexist.
The 4th patch modifies the spin table implementation for the ARMv8 f
Signed-off-by: Arnab Basu
Cc: Bhupesh Sharma
Cc: Marc Zyngier
---
arch/arm/include/asm/psci.h | 42 +-
1 file changed, 41 insertions(+), 1 deletion(-)
diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h
index 704b4b0..68579cd 100644
--
Both ARMv7 and ARMv8 need to patch the device tree but the kind
of patching done is different. This creates a function that can be
defined by each architecture to handle the differences
Signed-off-by: Arnab Basu
Cc: Bhupesh Sharma
Cc: Marc Zyngier
---
arch/arm/cpu/armv7/virt-dt.c | 7 ++-
This creates the function cpu_update_dt for ARMv8 which currently patches
the cpu node in the device table and sets enable-method to spin-table.
Signed-off-by: Arnab Basu
Cc: Bhupesh Sharma
Cc: York Sun
---
arch/arm/cpu/armv8/Makefile | 1 +
arch/arm/cpu/armv8/{fsl-lsch3/
A separate linker section makes it possible to keep this code either
in DDR or in some secure memory location provided specifically for the
purpose.
So far no one is using this section.
Signed-off-by: Arnab Basu
Cc: Bhupesh Sharma
Cc: Marc Zyngier
---
arch/arm/config.mk| 2 +-
ar
Set the enable-method in the cpu node to psci, create the psci
device tree node and also add a reserved-memory for the psci code
that lives in in normal RAM, so that the kernel leaves does not map it
Signed-off-by: Arnab Basu
Cc: Bhupesh Sharma
Cc: Marc Zyngier
---
arch/arm/cpu/armv8/cpu-dt.c
Signed-off-by: Arnab Basu
---
arch/arm/cpu/armv8/cpu-dt.c | 16 -
arch/arm/cpu/armv8/cpu.c | 113 ++
arch/arm/cpu/armv8/start.S| 141 +-
arch/arm/include/asm/armv8/mp.h | 36 ++
arch/arm/include
Implement core support for PSCI. As this is generic code, it doesn't
implement anything really useful (all the functions are returning
Not Implemented).
This is largely ported from the similar code that exists for ARMv7
Signed-off-by: Arnab Basu
Cc: Bhupesh Sharma
Cc: Marc Zyngier
---
arch/ar
Setup the ARMv8 PSCI code just before switching to EL2 and jumping
to the kernel.
Signed-off-by: Arnab Basu
Cc: Bhupesh Sharma
Cc: Marc Zyngier
---
arch/arm/cpu/armv8/cpu.c | 23 +++
arch/arm/cpu/armv8/psci.S | 6 ++
arch/arm/include/asm/system.h | 3 +++
arc
Enable the SMC instruction so that the kernel can use the psci code
Signed-off-by: Arnab Basu
Cc: Bhupesh Sharma
Cc: Marc Zyngier
---
arch/arm/include/asm/macro.h | 5 +
1 file changed, 5 insertions(+)
diff --git a/arch/arm/include/asm/macro.h b/arch/arm/include/asm/macro.h
index 1c8c425.
Dear Stefan,
In message <54b37759.7040...@denx.de> you wrote:
>
> > Should we add a memset(buf, 0, sizeof(buf)) before the memcpy() to
> > prevent information from earlier activities to leak?
>
> "buf" points to the new data to be written into the flash. We're
> overwriting the first "len" by
Dear Gerlando Falauto,
In message <54b380c2.4050...@keymile.com> you wrote:
>
> That's right, and that's the whole point: cmp_buf points to the data
> read from the flash sector before erasing it, because that's what we
> want to keep (by re-writing it).
> The first part, however, we overwrite
Dear Tom,
In message <20150112201143.GX10826@bill-the-cat> you wrote:
>
> I've pushed v2015.01 out to the repository and tarballs should exist
> soon.
Thanks. Tarballs are out.
Here the release statistics:
Processed 1588 csets from 162 developers
30 employers found
A
Hi,
this series will remove a couple of esd 4xx boards that became
obsolete in the past. Some others will be switched to generic board code.
Matthias
Matthias Fuchs (22):
ppx4xx: remove APC405 board
ppc4xx: remove AR405 board
ppc4xx: remove ASH405 board
ppc4xx: remove CMS700 board
ppc4
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |4 -
board/esd/dp405/Kconfig | 12 --
board/esd/dp405/MAINTAINERS |6 -
board/esd/dp405/Makefile| 13 ---
board/esd/dp405/dp405.c | 112 --
board/esd/dp405/flash.c |
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |4 -
board/esd/du440/Kconfig | 12 -
board/esd/du440/MAINTAINERS |6 -
board/esd/du440/Makefile|9 -
board/esd/du440/config.mk | 16 -
board/esd/du440/du440.c | 882 --
Signed-off-by: Matthias Fuchs
---
include/configs/CPCI2DP.h |2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h
index 05106cd..845ed81 100644
--- a/include/configs/CPCI2DP.h
+++ b/include/configs/CPCI2DP.h
@@ -20,6 +20,8 @@
#define CONFI
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |4 -
board/esd/hub405/Kconfig| 12 --
board/esd/hub405/MAINTAINERS|6 -
board/esd/hub405/Makefile | 10 --
board/esd/hub405/flash.c| 85 --
board/esd/hub405/hub405.c | 208 ---
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |4 -
board/esd/du405/Kconfig | 12 -
board/esd/du405/MAINTAINERS |6 -
board/esd/du405/Makefile|8 -
board/esd/du405/du405.c | 187 --
board/esd/du405/du405.h | 28 -
board/
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |4 -
board/esd/pmc405/Kconfig| 12 --
board/esd/pmc405/MAINTAINERS|6 -
board/esd/pmc405/Makefile | 13 --
board/esd/pmc405/pmc405.c | 142 -
configs/PMC405_defconfig|
Signed-off-by: Matthias Fuchs
---
include/configs/PLU405.h |2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 8705161..a236e11 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -21,6 +21,8 @@
#define CONFIG_PLU
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |4 -
board/esd/cms700/Kconfig| 12 --
board/esd/cms700/MAINTAINERS|6 -
board/esd/cms700/Makefile | 16 --
board/esd/cms700/cms700.c | 192
board/esd/cms700/flash.c
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |4 -
board/esd/ocrtc/Kconfig | 12 --
board/esd/ocrtc/MAINTAINERS |6 -
board/esd/ocrtc/Makefile|8 --
board/esd/ocrtc/cmd_ocrtc.c | 68 --
board/esd/ocrtc/flash.c | 140 ---
Signed-off-by: Matthias Fuchs
---
include/configs/PMC405DE.h |2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h
index 94b9547..f7d28e3 100644
--- a/include/configs/PMC405DE.h
+++ b/include/configs/PMC405DE.h
@@ -12,6 +12,8 @@
#define
Signed-off-by: Matthias Fuchs
---
include/configs/VOM405.h |2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h
index c06897b..e229256 100644
--- a/include/configs/VOM405.h
+++ b/include/configs/VOM405.h
@@ -19,6 +19,8 @@
#define CONFIG_VOM
only keep CPCI4052
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |9 -
board/esd/cpci405/Kconfig | 39
configs/CPCI405AB_defconfig |3 -
configs/CPCI405DT_defconfig |3 -
configs/CPCI405_defconfig |3 -
doc/README.scrapyard
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |4 -
board/g2000/Kconfig |9 -
board/g2000/MAINTAINERS |6 -
board/g2000/Makefile|8 -
board/g2000/g2000.c | 245 -
board/g2000/strataflash.c | 774 --
Signed-off-by: Matthias Fuchs
---
arch/powerpc/cpu/ppc4xx/Kconfig |4 -
board/esd/pci405/Kconfig| 12 -
board/esd/pci405/MAINTAINERS|6 -
board/esd/pci405/Makefile |9 -
board/esd/pci405/cmd_pci405.c | 97 ---
board/esd/pci405/flash.c| 85 ---
board/e
On Mon, 12 Jan 2015 20:57:29 +0100
Sjoerd Simons wrote:
> On Mon, 2015-01-12 at 17:57 +, Ian Campbell wrote:
> > On Mon, 2015-01-12 at 10:34 -0700, Stephen Warren wrote:
>
> > > * boot.scr must be generated (to boot.scr.uimg) using
> > > bootloader-specific tools, rather than extlinux.conf,
It's done in spi_alloc_slave().
Signed-off-by: Axel Lin
---
drivers/spi/davinci_spi.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c
index 0ec5b9d..bf18362 100644
--- a/drivers/spi/davinci_spi.c
+++ b/drivers/spi/davinci_spi.c
@@ -32,9
For boards which use multiple I2C devices, or for SOCs which support
multiple boards, we might want to convert these to driver model at different
times. At present this is difficult because we need to either use
CONFIG_DM_I2C for a board or not.
Add a compatibility layer which implements the old A
This series allows you to use driver model for I2C drivers while still
using the old I2C interface. This is achieved by using a dm_ prefix for the
driver model version of i2c_read(), i2c_write() and i2c_probe(), and
providing compatibility version of these and other functions from the old
I2C API.
Add a dm_ prefix to driver model I2C functions so that we can keep the old
ones around.
This is a little unfortunate, but on reflection it is too difficult to
change the API. We can undo this rename when most boards and drivers are
converted to use driver model for I2C.
Signed-off-by: Simon Glass
Hi Tom,
The following changes since commit 92fa7f53f1f3f03296f8ffb14bdf1baefab83368:
Prepare v2015.01 (2015-01-12 09:39:08 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-x86.git
for you to fetch changes up to c479f96c0e0ceb226a8fb83a7996b78bfdcfd7b2:
x86: Remove
1 - 100 of 138 matches
Mail list logo