Thanks Simon,
On 05/01/2015 03:02 PM, Simon Glass wrote:
+Masahiro, for my of_match_ptr() comment below.
Hi Vikas,
On 1 May 2015 at 15:48, Vikas Manocha vikas.mano...@st.com wrote:
This patch adds device tree support for arm pl010/pl011 driver.
Signed-off-by: Vikas Manocha
On Wednesday, April 29, 2015 at 04:58:14 PM, dingu...@opensource.altera.com
wrote:
From: Dinh Nguyen dingu...@opensource.altera.com
This patch enables the SDRAM controller that is used on Altera's SoCFPGA
family. This patch configures the SDRAM controller based on a configuration
file that
On Saturday, October 11, 2014 at 06:42:57 PM, Marek Vasut wrote:
The GPIO driver didn't correctly compute the bank offset
from the GPIO number and caused random writes into the
GPIO block address space. Fix the driver so it actually
does the writes correctly. While at it, make use of the
On Sat, 2015-05-02 at 02:46 +0200, Marek Vasut wrote:
On Thursday, November 27, 2014 at 03:03:50 AM, Scott Wood wrote:
On Sat, Oct 11, 2014 at 06:42:50PM +0200, Marek Vasut wrote:
The correct name of this symbol is CONFIG_S3C2410_NAND_HWECC , the
_SYS is redundant.
What makes that
On Saturday, October 11, 2014 at 06:42:56 PM, Marek Vasut wrote:
This is a matter of simple additional ifdefery to cater
for the different register layout of the S3C2440 chip.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Heiko Schocher h...@denx.de
Cc: Kyungmin Park
On Thursday, November 27, 2014 at 03:03:50 AM, Scott Wood wrote:
On Sat, Oct 11, 2014 at 06:42:50PM +0200, Marek Vasut wrote:
The correct name of this symbol is CONFIG_S3C2410_NAND_HWECC , the
_SYS is redundant.
What makes that the correct name? The symbol is not documented anywhere,
and
Signed-off-by: Vikas Manocha vikas.mano...@st.com
---
arch/arm/dts/Makefile |1 +
arch/arm/dts/stv0991.dts | 23 +++
configs/stv0991_defconfig |1 +
include/configs/stv0991.h |3 +++
4 files changed, 28 insertions(+)
create mode 100644
On 1 May 2015 at 16:43, Vikas Manocha vikas.mano...@st.com wrote:
Signed-off-by: Vikas Manocha vikas.mano...@st.com
---
board/st/stv0991/stv0991.c |2 ++
1 file changed, 2 insertions(+)
Needs a commit message. With that:
Reviewed-by: Simon Glass s...@chromium.org
diff --git
Hi Vikas,
On 1 May 2015 at 16:43, Vikas Manocha vikas.mano...@st.com wrote:
commit message here
Signed-off-by: Vikas Manocha vikas.mano...@st.com
---
arch/arm/dts/Makefile |1 +
arch/arm/dts/stv0991.dts | 23 +++
configs/stv0991_defconfig |1 +
On Thursday, October 16, 2014 at 11:28:44 AM, Anatolij Gustschin wrote:
Hi Marek,
On Sat, 11 Oct 2014 18:42:49 +0200
Marek Vasut ma...@denx.de wrote:
Add basic framebuffer driver for the S3C24xx family of CPUs.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Anatolij Gustschin
Hi Vikas,
On 1 May 2015 at 17:18, vikasm vikas.mano...@st.com wrote:
Thanks Simon,
On 05/01/2015 04:01 PM, Simon Glass wrote:
Hi Vikas,
On 1 May 2015 at 16:43, Vikas Manocha vikas.mano...@st.com wrote:
commit message here
There is not much to add in the commit message apart from info in
On Wednesday, April 29, 2015 at 04:58:15 PM, dingu...@opensource.altera.com
wrote:
From: Dinh Nguyen dingu...@opensource.altera.com
This patch adds the DDR calibration portion of the Altera SDRAM driver.
Signed-off-by: Dinh Nguyen dingu...@opensource.altera.com
[...]
On Saturday, May 02, 2015 at 03:11:41 AM, Scott Wood wrote:
On Sat, 2015-05-02 at 02:46 +0200, Marek Vasut wrote:
On Thursday, November 27, 2014 at 03:03:50 AM, Scott Wood wrote:
On Sat, Oct 11, 2014 at 06:42:50PM +0200, Marek Vasut wrote:
The correct name of this symbol is
Thanks Simon,
On 05/01/2015 04:01 PM, Simon Glass wrote:
Hi Vikas,
On 1 May 2015 at 16:43, Vikas Manocha vikas.mano...@st.com wrote:
commit message here
There is not much to add in the commit message apart from info in the title,
that is why i didn't add any message in the body. Please let
Hi Simon,
On 05/01/2015 04:45 PM, Simon Glass wrote:
Hi Vikas,
On 1 May 2015 at 17:18, vikasm vikas.mano...@st.com wrote:
Thanks Simon,
On 05/01/2015 04:01 PM, Simon Glass wrote:
Hi Vikas,
On 1 May 2015 at 16:43, Vikas Manocha vikas.mano...@st.com wrote:
commit message here
There is
This patchset adds device tree support for stv0991 soc.
Changes in v2:
- added commit messages for both patches.
Vikas Manocha (2):
stv0991: fdt: add stv0991 device tree
stv0991: use fdt for serial port platform data
arch/arm/dts/Makefile |1 +
arch/arm/dts/stv0991.dts | 23
This patch adds device tree for the ST Micro stv0991 board enables
device tree control. Progressively device tree support for the drivers
being used will also be added.
Signed-off-by: Vikas Manocha vikas.mano...@st.com
---
Changes in v2:
- added commit message.
arch/arm/dts/Makefile |
This patch ignores the serial port static platform data at compilation time
in case of device tree control.
Signed-off-by: Vikas Manocha vikas.mano...@st.com
Reviewed-by: Simon Glass s...@chromium.org
---
Changes in v2:
- added commit message.
board/st/stv0991/stv0991.c |2 ++
1 file
On Thursday, November 27, 2014 at 03:20:53 AM, Scott Wood wrote:
On Sat, Oct 11, 2014 at 06:42:53PM +0200, Marek Vasut wrote:
+#ifdef CONFIG_S3C2410
#define S3C2410_NFCONF_TACLS(x)((x)8)
#define S3C2410_NFCONF_TWRPH0(x) ((x)4)
#define S3C2410_NFCONF_TWRPH1(x) ((x)0)
On Sat, 2015-05-02 at 02:48 +0200, Marek Vasut wrote:
On Thursday, November 27, 2014 at 03:20:53 AM, Scott Wood wrote:
On Sat, Oct 11, 2014 at 06:42:53PM +0200, Marek Vasut wrote:
+#ifdef CONFIG_S3C2410
+ sel_reg = (uint32_t)nand-nfconf;
+ sel_bit = S3C2410_NFCONF_nFCE;
On Sat, 2015-05-02 at 03:18 +0200, Marek Vasut wrote:
On Saturday, May 02, 2015 at 03:11:41 AM, Scott Wood wrote:
On Sat, 2015-05-02 at 02:46 +0200, Marek Vasut wrote:
On Thursday, November 27, 2014 at 03:03:50 AM, Scott Wood wrote:
On Sat, Oct 11, 2014 at 06:42:50PM +0200, Marek Vasut
This patchset adds device tree support for stv0991 soc.
Vikas Manocha (2):
stv0991: fdt: add stv0991 device tree
stv0991: use fdt for serial port platform data
arch/arm/dts/Makefile |1 +
arch/arm/dts/stv0991.dts | 23 +++
board/st/stv0991/stv0991.c |2
Signed-off-by: Vikas Manocha vikas.mano...@st.com
---
board/st/stv0991/stv0991.c |2 ++
1 file changed, 2 insertions(+)
diff --git a/board/st/stv0991/stv0991.c b/board/st/stv0991/stv0991.c
index 38f6e1d..09f973f 100644
--- a/board/st/stv0991/stv0991.c
+++ b/board/st/stv0991/stv0991.c
@@
On 2015-05-01, Fabio Estevam wrote:
On Fri, May 1, 2015 at 5:20 PM, Fabio Estevam feste...@gmail.com wrote:
Looking at Solid-run's tree they have the following commit that may be
related to this PHY issue:
I applied Rabeeh's patch on top of this v2 series and generated the
two attached
Hi Tom,
On 1 May 2015 at 07:38, Tom Rini tr...@konsulko.com wrote:
On Thu, Apr 30, 2015 at 07:54:21PM -0600, Simon Glass wrote:
Hi Joe,
On 29 April 2015 at 10:17, Joe Hershberger joe.hershber...@gmail.com
wrote:
Hi Simon,
On Wed, Apr 29, 2015 at 8:30 AM, Simon Glass
On Friday, May 01, 2015 at 11:01:09 AM, Pavel Machek wrote:
This is needed for the SoCFPGA booting from SPI NOR flash
e.g. (N25Q256A) as long as u-boot-spl 2013 is used (newer one is not
available).
Signed-off-by: Stefan Roese s...@denx.de
Signed-off-by: Pavel Machek pa...@denx.de
---
On Fri, May 1, 2015 at 4:33 AM, Stefano Babic sba...@denx.de wrote:
Hi Vagrant,
On 01/05/2015 07:50, Vagrant Cascadian wrote:
Net: Phy 0 not found
PHY reset timed out
FEC
ok, the PHY is not found, but I cannot understand how Fabio's changes
dropping ASIX can be the cause. Have you
On Fri 2015-05-01 16:24:45, Marek Vasut wrote:
On Friday, May 01, 2015 at 11:01:09 AM, Pavel Machek wrote:
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index 201471c..f7cfbd9 100644
--- a/drivers/mtd/spi/sf_probe.c
+++ b/drivers/mtd/spi/sf_probe.c
@@ -347,6
On 05/01/2015 03:14 AM, Pavel Machek wrote:
If there's duplicty between config system and config_cmd_default, a
ton of warnings is raised, because one uses plain defines, and other
defines it to 1. Adjust config_cmd_default.h not to provoke the
warnings.
I believe the correct way to fix this
Hi,
On 01-05-15 00:04, Simon Glass wrote:
Hi Hans,
On 30 April 2015 at 13:38, Hans de Goede hdego...@redhat.com wrote:
Hi,
On 30-04-15 16:48, Simon Glass wrote:
Hi Hans,
On 30 April 2015 at 08:35, Hans de Goede hdego...@redhat.com wrote:
Hi Simon and Marek,
This series completes my
Hi,
On 01-05-15 06:11, Simon Glass wrote:
Hi Hans,
On 30 April 2015 at 08:35, Hans de Goede hdego...@redhat.com wrote:
Currently we copy over a number of usb_device values stored in the on stack
struct usb_device probed in usb_scan_device() to the final driver-model managed
struct usb_device
Hi Vagrant,
On 01/05/2015 07:50, Vagrant Cascadian wrote:
Net: Phy 0 not found
PHY reset timed out
FEC
ok, the PHY is not found, but I cannot understand how Fabio's changes
dropping ASIX can be the cause. Have you reverted back U-Boot to V1 set
of patchset to check again if it works ? It
Hi Simon,
I Added the email listed in the test script to this conversation
Please do add tests for the new functionality - see test/image for
some existing tests. Python is preferred if the test is non-trivial.
Absolutely, I'll be sure to include some tests in the patch(es)..
Great. This
On Fri, May 1, 2015 at 1:20 PM, Vagrant Cascadian vagr...@aikidev.net wrote:
I did revert back, and at first that seemed to fix it, but after more
testing, the issue appears to be intermittent, and unrelated to the USB
changes.
So my earlier Tested-By stands; I think it's worth applying.
Hi Hans,
On 1 May 2015 at 04:04, Hans de Goede hdego...@redhat.com wrote:
Currently we copy over a number of usb_device values stored in the on stack
struct usb_device probed in usb_scan_device() to the final driver-model
managed
struct usb_device in usb_child_pre_probe() through
On 2015-05-01, Stefano Babic wrote:
On 01/05/2015 07:50, Vagrant Cascadian wrote:
Net: Phy 0 not found
PHY reset timed out
FEC
ok, the PHY is not found, but I cannot understand how Fabio's changes
dropping ASIX can be the cause. Have you reverted back U-Boot to V1 set
of patchset to
On Fri, May 1, 2015 at 2:10 PM, Fabio Estevam feste...@gmail.com wrote:
On Fri, May 1, 2015 at 1:20 PM, Vagrant Cascadian vagr...@aikidev.net wrote:
I did revert back, and at first that seemed to fix it, but after more
testing, the issue appears to be intermittent, and unrelated to the USB
On Wed, Apr 29, 2015 at 09:11:03AM -0500, Rob Herring wrote:
On Wed, Apr 29, 2015 at 3:12 AM, Maxime Ripard
maxime.rip...@free-electrons.com wrote:
Hi Rob,
On Tue, Apr 28, 2015 at 05:24:59PM -0500, Rob Herring wrote:
On Wed, Apr 22, 2015 at 8:04 AM, Maxime Ripard
Hi Tom,
This includes PIRQ routing support for a few platforms, the beginnings
of better GPIO/pinmux support and multi-core + SFI support.
The following changes since commit ace97d26176a3ebc9ec07738450de93eea35975c:
Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze
(2015-04-29
On Friday, May 01, 2015 at 04:49:37 PM, Pavel Machek wrote:
On Fri 2015-05-01 16:24:45, Marek Vasut wrote:
On Friday, May 01, 2015 at 11:01:09 AM, Pavel Machek wrote:
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index 201471c..f7cfbd9 100644
---
This is needed for the SoCFPGA booting from SPI NOR flash
e.g. (N25Q256A) as long as u-boot-spl 2013 is used (newer one is not
available).
Signed-off-by: Stefan Roese s...@denx.de
Signed-off-by: Pavel Machek pa...@denx.de
---
Ported to today's u-boot version.
diff --git
Hi,
On 01-05-15 09:21, Hans de Goede wrote:
Hi,
On 01-05-15 06:11, Simon Glass wrote:
Hi Hans,
On 30 April 2015 at 08:35, Hans de Goede hdego...@redhat.com wrote:
Currently we copy over a number of usb_device values stored in the on stack
struct usb_device probed in usb_scan_device() to the
Hi,
On 01-05-15 06:12, Simon Glass wrote:
Hi Hans,
On 30 April 2015 at 08:35, Hans de Goede hdego...@redhat.com wrote:
Convert sunxi-boards which use the sunxi-ehci code to the driver-model.
Signed-off-by: Hans de Goede hdego...@redhat.com
---
board/sunxi/Kconfig | 3 ++
If there's duplicty between config system and config_cmd_default, a
ton of warnings is raised, because one uses plain defines, and other
defines it to 1. Adjust config_cmd_default.h not to provoke the
warnings.
Signed-off-by: Pavel Machek pa...@denx.de
diff --git a/include/config_cmd_default.h
Interrupt endpoints typically are polled for a long time by the usb
controller before they return anything, so calls to submit_int_msg() can
take a long time to complete this.
To avoid this the u-boot code has the an interrupt queue mechanism / API,
add support for this to the driver-model usb
Convert sunxi-boards which use the sunxi-ehci code to the driver-model.
Signed-off-by: Hans de Goede hdego...@redhat.com
Acked-by: Simon Glass s...@chromium.org
---
board/sunxi/Kconfig | 3 ++
drivers/usb/host/ehci-sunxi.c | 89 +--
2 files
The ehci driver model code for finding the first upstream usb-2 hub before
this commit has a number of issues:
1) if (!ttdev-speed != USB_SPEED_HIGH) does not work because the '!'
takes presedence over the '!=' this should simply be
if (ttdev-speed == USB_SPEED_HIGH)
2) It makes ttdev point
This is a preparation patch for adding interrupt-queue support to the
ehci dm code.
Signed-off-by: Hans de Goede hdego...@redhat.com
Acked-by: Simon Glass s...@chromium.org
---
drivers/usb/host/ehci-hcd.c | 31 +--
1 file changed, 25 insertions(+), 6 deletions(-)
Hi,
On 01-05-15 06:11, Simon Glass wrote:
Hi Hans,
On 30 April 2015 at 08:35, Hans de Goede hdego...@redhat.com wrote:
Use the controller_dev pointer in the ehci hcd code rather then going up
the tree till we find the first UCLASS_USB device.
Signed-off-by: Hans de Goede hdego...@redhat.com
Hi,
On 01-05-15 06:11, Simon Glass wrote:
Hi Hans,
On 30 April 2015 at 08:35, Hans de Goede hdego...@redhat.com wrote:
When calling into the hcd code in usb_scan_device() we do not yet have
the actual udevice for the device we are scanning, so we temporarily set
usb_device.dev to the parent.
Currently we copy over a number of usb_device values stored in the on stack
struct usb_device probed in usb_scan_device() to the final driver-model managed
struct usb_device in usb_child_pre_probe() through usb_device_platdata, and
then call usb_select_config() to fill in the rest.
There are 3
Without this usb-1 device descriptors do not get read properly.
Signed-off-by: Hans de Goede hdego...@redhat.com
Acked-by: Simon Glass s...@chromium.org
---
drivers/usb/host/ehci-hcd.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/usb/host/ehci-hcd.c
Hi Simon and Marek,
Here is v2 of my driver-model fixes and dm support for sunxi-ehci.c set.
Changes since v1:
-Improved the commit mesg for dm: usb: Copy over usb_device values from
usb_scan_device() to final usb_device adding that doing select config
twice does not work for (some) usb-1
Use usb_get_bus in dm ehci code rather then re-implementing it.
Signed-off-by: Hans de Goede hdego...@redhat.com
---
drivers/usb/host/ehci-hcd.c | 9 +
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index
Add support for interrupt queues to the dm ehci code.
Signed-off-by: Hans de Goede hdego...@redhat.com
Acked-by: Simon Glass s...@chromium.org
---
drivers/usb/host/ehci-hcd.c | 26 ++
1 file changed, 26 insertions(+)
diff --git a/drivers/usb/host/ehci-hcd.c
Make usb_get_bus easier to use for callers, by directly returning the bus
rather then returning it via a pass-by-ref argument.
This also removes the error checking from the single current caller, as
we alreayd have an assert() for bus not being NULL in usb_get_bus().
Signed-off-by: Hans de Goede
Vagrant,
On Fri, May 1, 2015 at 5:20 PM, Fabio Estevam feste...@gmail.com wrote:
Looking at Solid-run's tree they have the following commit that may be
related to this PHY issue:
I applied Rabeeh's patch on top of this v2 series and generated the
two attached patches.
Could you please give
This patch adds device tree support for arm pl010/pl011 driver.
Signed-off-by: Vikas Manocha vikas.mano...@st.com
---
doc/device-tree-bindings/serial/pl01x.txt |7 +
drivers/serial/serial_pl01x.c | 41 -
2 files changed, 47 insertions(+), 1
+Masahiro, for my of_match_ptr() comment below.
Hi Vikas,
On 1 May 2015 at 15:48, Vikas Manocha vikas.mano...@st.com wrote:
This patch adds device tree support for arm pl010/pl011 driver.
Signed-off-by: Vikas Manocha vikas.mano...@st.com
---
doc/device-tree-bindings/serial/pl01x.txt |7
Hi All,
I’d like to add spi nand support in u-boot. But I don’t know where should
the spi nand drivers put in and how to define the architecture.
I find that currently spi_flash in u-boot means spi nor flash. Should I create
a struct spi_nand_flash or make spi_flash compatible?
Thanks
Peter Pan
I'm having an issue using CONFIG_MTD_CONCAT with a dual-die NOR flash
part. Assistance appreciated.
We're using the driver for greater compatibility between single and
dual-die NOR flash parts.
= mtdparts
device nor2 of-flash.2, # parts = 5
#: namesizeoffset
On Thu, Apr 30, 2015 at 07:54:21PM -0600, Simon Glass wrote:
Hi Joe,
On 29 April 2015 at 10:17, Joe Hershberger joe.hershber...@gmail.com wrote:
Hi Simon,
On Wed, Apr 29, 2015 at 8:30 AM, Simon Glass s...@chromium.org wrote:
Hi Joe,
On 28 April 2015 at 22:14, Joe Hershberger
62 matches
Mail list logo
