Hello Wenyou,
Am 09.12.2015 um 08:43 schrieb Yang, Wenyou:
Hello Heiko,
-Original Message-
From: Heiko Schocher [mailto:h...@denx.de]
Sent: 2015年12月9日 15:39
To: Yang, Wenyou
Cc: U-Boot Mailing List ; andreas.de...@googlemail.com;
Meier, Roger
Subject: Re: [PATCH] defconfig: taurus_de
To reduce the duplicated code, add UTMI PLL enable/disable functions,
replace the UTMI PLL handle code with these functions.
It is based on the following patch set.
[PATCH v2 0/5] ARM: at91: improve peripheral and system clock handle
functions
Changes in v2:
- remain asm/io.h include.
Due to introducing the new UTMI PLL clock handle functions,
use these function to reduce the duplicated code.
Signed-off-by: Wenyou Yang
---
Changes in v2:
- remain asm/io.h include.
drivers/usb/host/ehci-atmel.c | 38 --
drivers/usb/host/ohci-at91.c |
Due to introducing the UTMI PLL enable function, use this function
to reduce the duplicated code.
Signed-off-by: Wenyou Yang
---
Changes in v2: None
arch/arm/mach-at91/armv7/sama5d2_devices.c |5 +
arch/arm/mach-at91/armv7/sama5d3_devices.c |5 +
arch/arm/mach-at91/armv7/sama5d
To avoid the duplicated code, add the UTMI PLL handle functions,
and add PMC_USB init function too.
Signed-off-by: Wenyou Yang
---
Changes in v2: None
arch/arm/mach-at91/clock.c| 48 +
arch/arm/mach-at91/include/mach/clk.h |3 +++
2 files chang
Due to introducing the new UTMI PLL clock handle functions,
use the functions to reduce the duplicated code.
Signed-off-by: Wenyou Yang
---
Changes in v2: None
board/siemens/corvus/board.c |4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/board/siemens/corvus/board.c b/
Hello Marek,
On Tue, 8 Dec 2015 14:43:42 +0100, Marek Vasut wrote:
> The arch/arm/lib/cache-cp15.c checks for CONFIG_ARMV7 and if this macro is
> set, it configures TTBR0 register. This register must be configured for the
> cache on ARMv7 to operate correctly.
>
> The problem is that noone actu
On 8.12.2015 15:44, Nathan Rossi wrote:
> When the Zynq Boot ROM code loads the payload from QSPI it uses the
> LQSPI feature of the QSPI device, however it does not clean up its
> configuration before handing over to the payload which leaves the device
> confgured to by-pass the standard non-linea
On 8.12.2015 15:44, Nathan Rossi wrote:
> Update the ZYBO device tree and enable config options that relate to the
> added devices in the device tree.
>
> Signed-off-by: Nathan Rossi
> Cc: Albert Aribaud
> Cc: Michal Simek
> Cc: Simon Glass
> ---
> arch/arm/dts/zynq-zybo.dts | 18 +++
Hey Geoff
On Mon, 2015-12-07 at 22:13 -0500, Geoff Cleary wrote:
> We have successfully built u-boot loader for rk3288 from the rock_bsp
> repository here:
> https://github.com/radxa/rock-bsp.git
The u-boot loader in the radxa/rockchip BSP is a vendor fork of an old
mainline u-boot. This list is
Hi
> -Original Message-
> From: Heiko Schocher [mailto:h...@denx.de]
> Sent: 2015年12月9日 16:00
> To: Yang, Wenyou
> Cc: U-Boot Mailing List ; andreas.de...@googlemail.com;
> Meier, Roger
> Subject: Re: [PATCH] defconfig: taurus_defconfig: disable SPL
>
> Hello Wenyou,
>
> Am 09.12.2015
Hello Wenyou,
Am 09.12.2015 um 09:34 schrieb Yang, Wenyou:
Hi
-Original Message-
From: Heiko Schocher [mailto:h...@denx.de]
Sent: 2015年12月9日 16:00
To: Yang, Wenyou
Cc: U-Boot Mailing List ; andreas.de...@googlemail.com;
Meier, Roger
Subject: Re: [PATCH] defconfig: taurus_defconfig: d
Hello Heiko,
> -Original Message-
> From: Heiko Schocher [mailto:h...@denx.de]
> Sent: 2015年12月9日 16:46
> To: Yang, Wenyou
> Cc: U-Boot Mailing List ; andreas.de...@googlemail.com;
> Meier, Roger
> Subject: Re: [PATCH] defconfig: taurus_defconfig: disable SPL
>
> Hello Wenyou,
>
> Am 0
Hi Michal,
> Hi Marek and Lukasz,
>
> On 3.11.2015 11:14, Lukasz Majewski wrote:
> > Hi Michal,
> >
> >> Cast u32 bit value to 64bit before recasting to 64bit pointer to
> >> avoid pointer from integer cast size mismatch warnings.
> >>
> >> Warning log:
> >> +../drivers/usb/gadget/udc/udc-core.c
Hi Tom,
On Wed, Dec 9, 2015 at 10:02 AM, Bin Meng wrote:
> Hi Tom,
>
> This includes fixes to PCI UART on CrownBay and Galileo, and minor
> changes to x86 timer.
>
> The following changes since commit 8555dd88cd1a7b5dd1e76c111fe635a92223b98b:
>
> axs10x: add support of generic EHCI USB 2.0 cont
On 9.12.2015 10:33, Lukasz Majewski wrote:
> Hi Michal,
>
>> Hi Marek and Lukasz,
>>
>> On 3.11.2015 11:14, Lukasz Majewski wrote:
>>> Hi Michal,
>>>
Cast u32 bit value to 64bit before recasting to 64bit pointer to
avoid pointer from integer cast size mismatch warnings.
Warning
On Wed, Dec 9, 2015 at 3:58 PM, Stefan Roese wrote:
> Hi Bin,
>
> On 07.12.2015 10:39, Bin Meng wrote:
>>
>> Currently OF_BAD_ADDR is always -1ULL. When using OF_BAD_ADDR as the
>> return value of dev_get_addr(), it creates potential size mismatch
>> as dev_get_addr() uses FDT_ADDR_T_NONE as the r
Hi Marek,
> The driver is for the dwc2 otg block , so rename it accordingly
> finally.
>
> Marek Vasut (24):
> usb: s3c-otg: Rename regs-otg.h to s3c_udc_otg_regs.h
> usb: s3c-otg: Rename struct s3c_udc to dwc2_udc
> usb: s3c-otg: Rename struct s3c_usbotg_reg to dwc2_usbotg_reg
> usb: s3c
Hi Tom,
This includes fixes to PCI UART on CrownBay and Galileo, minor changes
to x86 timer and some clean up to ivybridge support.
The following changes since commit 8555dd88cd1a7b5dd1e76c111fe635a92223b98b:
axs10x: add support of generic EHCI USB 2.0 controller (2015-12-08
17:29:56 +0300)
a
Hello Andreas,
Am 09.12.2015 um 09:37 schrieb Andreas Bießmann:
Hi Heiko,
On 09.12.2015 08:14, Heiko Schocher wrote:
Hello Wenyou,
Am 09.12.2015 um 05:36 schrieb Wenyou Yang:
To avoid the duplicated code, add the PMC_PLLICPR init function.
Signed-off-by: Wenyou Yang
---
arch/arm/mach-a
Hello Wenyou,
Am 09.12.2015 um 08:48 schrieb Wenyou Yang:
To reduce the duplicated code, rework the peripheral's and
system's clock handle functions, use these functions to replace
the clock handle code.
Changes in v2:
- fix checkpatch warning.
Wenyou Yang (5):
ARM: at91: asm/at91_pmc.h:
On 12/04/2015 08:32 PM, Eric Nelson wrote:
> The low four bits of the SYSCTL register are reserved on the USDHC
> controller on i.MX6 and i.MX7 processors, but are used for clocking
> operations on earlier models.
>
> Guard against their usage by hiding the bit mask macros on those
> processors.
>
Hi Eric and Fabio,
On 12/07/2015 03:50 PM, Eric Nelson wrote:
> Table 41 of the JEDEC standard for eMMC says that bit 31 of
> the command argument is obsolete when issuing the ERASE
> command (CMD38) on page 115 of this document:
> http://www.jedec.org/sites/default/files/docs/jesd84-B45.pdf
Hi All!
On 09.12.2015 09:09, Albert ARIBAUD wrote:
On Tue, 8 Dec 2015 14:43:42 +0100, Marek Vasut wrote:
The arch/arm/lib/cache-cp15.c checks for CONFIG_ARMV7 and if this macro is
set, it configures TTBR0 register. This register must be configured for the
cache on ARMv7 to operate correctly.
On Tue, 2015-12-08 at 13:57 +0100, Marek Vasut wrote:
> On Tuesday, December 08, 2015 at 01:34:53 PM, Chin Liang See wrote:
> > On Mon, 2015-12-07 at 18:46 +0100, Marek Vasut wrote:
> > > On Monday, December 07, 2015 at 03:56:01 PM, Chin Liang See
> > > wrote:
> > > [...]
> > >
> > > > > The cpu_e
On 9 December 2015 at 10:24, Simon Glass wrote:
> On 6 December 2015 at 11:34, Jagan Teki wrote:
>> Since all spi-flash core operations are moved into
>> sf_ops.c then it's better to renamed as spi-flash.c
>>
>> Signed-off-by: Jagan Teki
>> ---
>> drivers/mtd/spi/Makefile | 2 +
On Tue, 2015-12-08 at 13:54 +0100, Marek Vasut wrote:
> On Tuesday, December 08, 2015 at 01:04:29 PM, Stefan Roese wrote:
> > On 08.12.2015 12:13, Pavel Machek wrote:
> > > > > > > Usage:
> > > > > > > ubifsmount
> > > > > > >
> > > > > > > - mount 'volume-name' volume
> > > > > > >
> > > >
On Tue, 2015-12-08 at 13:53 +0100, Marek Vasut wrote:
> On Tuesday, December 08, 2015 at 12:13:23 PM, Pavel Machek wrote:
>
> [...]
>
> > > > Thanks for the pointers.
> > > >
> > > > I checked the source and enabled the debug message. Noticed my
> > > > failure
> > > > is due to small LEB and PE
On Wednesday, December 09, 2015 at 10:37:42 AM, Lukasz Majewski wrote:
> Hi Marek,
>
> > The driver is for the dwc2 otg block , so rename it accordingly
> > finally.
> >
> > Marek Vasut (24):
> > usb: s3c-otg: Rename regs-otg.h to s3c_udc_otg_regs.h
> > usb: s3c-otg: Rename struct s3c_udc to
On Wednesday, December 09, 2015 at 02:02:03 PM, Stefan Roese wrote:
> Hi All!
>
> On 09.12.2015 09:09, Albert ARIBAUD wrote:
> > On Tue, 8 Dec 2015 14:43:42 +0100, Marek Vasut wrote:
> >> The arch/arm/lib/cache-cp15.c checks for CONFIG_ARMV7 and if this macro
> >> is set, it configures TTBR0 reg
On Wednesday, December 09, 2015 at 02:48:49 PM, Chin Liang See wrote:
> On Tue, 2015-12-08 at 13:54 +0100, Marek Vasut wrote:
> > On Tuesday, December 08, 2015 at 01:04:29 PM, Stefan Roese wrote:
> > > On 08.12.2015 12:13, Pavel Machek wrote:
> > > > > > > > Usage:
> > > > > > > > ubifsmount
> > >
Hi Heiko,
On 09.12.2015 08:14, Heiko Schocher wrote:
> Hello Wenyou,
>
> Am 09.12.2015 um 05:36 schrieb Wenyou Yang:
>> To avoid the duplicated code, add the PMC_PLLICPR init function.
>>
>> Signed-off-by: Wenyou Yang
>> ---
>>
>> arch/arm/mach-at91/armv7/clock.c |7 +++
>>
passing argv/argc can produce off-by-one errors
Signed-off-by: Andreas Fenkart
---
common/env_flags.c | 14 +++---
include/env_flags.h | 2 +-
tools/env/fw_env.c | 11 +++
3 files changed, 15 insertions(+), 12 deletions(-)
diff --git a/common/env_flags.c b/common/env_flags.c
Currently parameter parsing happens in two steps. First with
getopt at the beginning of main to parse the common options.
Then second is using adhoc parsing in printenv/setenv code path.
When doing adhoc parsing, the order of arguments is important.
This patch will parse arguments only in one plac
Signed-off-by: Andreas Fenkart
---
tools/env/fw_env.c | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c
index 22507f6..5b76b74 100644
--- a/tools/env/fw_env.c
+++ b/tools/env/fw_env.c
@@ -207,7 +207,7 @@ char *fw_getdefenv(cha
Signed-off-by: Andreas Fenkart
---
tools/env/fw_env_main.c | 62 +
1 file changed, 37 insertions(+), 25 deletions(-)
diff --git a/tools/env/fw_env_main.c b/tools/env/fw_env_main.c
index daf4688..39c8771 100644
--- a/tools/env/fw_env_main.c
+++ b/to
Signed-off-by: Andreas Fenkart
---
tools/env/fw_env.c | 54 ++---
tools/env/fw_env_main.c | 4
2 files changed, 15 insertions(+), 43 deletions(-)
diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c
index 2cfff02..b1cf9ae 100644
--- a/tools/
disabled original parsing, but not yet removed since the
argument indexing needs to be fixed
Signed-off-by: Andreas Fenkart
---
tools/env/fw_env.c | 64 ++---
tools/env/fw_env.h | 15
tools/env/fw_env_main.c | 31
goal is to use getopt for all argument parsing instead of adhoc
parsing in fw_getenv/fw_setenv functions
Signed-off-by: Andreas Fenkart
---
tools/env/fw_env.h | 9
tools/env/fw_env_main.c | 113
2 files changed, 84 insertions(+), 38 de
Signed-off-by: Andreas Fenkart
---
tools/env/fw_env_main.c | 117 +++-
1 file changed, 75 insertions(+), 42 deletions(-)
diff --git a/tools/env/fw_env_main.c b/tools/env/fw_env_main.c
index 39c8771..4bd4216 100644
--- a/tools/env/fw_env_main.c
+++ b/to
The value TBIANA_SETTINGS is also work on the p2041rdb board, so it can work
on the both phy and phyless connections.
At 2015-11-26 12:17:42, "Shaohui Xie" wrote:
>> -Original Message-
>> From: York Sun [mailto:york...@freescale.com]
>> Sent: Thursday, November 26, 2015 1:03 AM
>> To:
Hi Marek,
> On Wednesday, December 09, 2015 at 10:37:42 AM, Lukasz Majewski wrote:
> > Hi Marek,
> >
> > > The driver is for the dwc2 otg block , so rename it accordingly
> > > finally.
> > >
> > > Marek Vasut (24):
> > > usb: s3c-otg: Rename regs-otg.h to s3c_udc_otg_regs.h
> > > usb: s3c-o
On Wednesday, December 09, 2015 at 04:02:58 PM, Lukasz Majewski wrote:
> Hi Marek,
>
> > On Wednesday, December 09, 2015 at 10:37:42 AM, Lukasz Majewski wrote:
> > > Hi Marek,
> > >
> > > > The driver is for the dwc2 otg block , so rename it accordingly
> > > > finally.
> > > >
> > > > Marek Vas
Hi Marek,
> On Wednesday, December 09, 2015 at 04:02:58 PM, Lukasz Majewski wrote:
> > Hi Marek,
> >
> > > On Wednesday, December 09, 2015 at 10:37:42 AM, Lukasz Majewski
> > > wrote:
> > > > Hi Marek,
> > > >
> > > > > The driver is for the dwc2 otg block , so rename it
> > > > > accordingly fi
On Wednesday, December 09, 2015 at 05:06:52 PM, Lukasz Majewski wrote:
> Hi Marek,
>
> > On Wednesday, December 09, 2015 at 04:02:58 PM, Lukasz Majewski wrote:
> > > Hi Marek,
> > >
> > > > On Wednesday, December 09, 2015 at 10:37:42 AM, Lukasz Majewski
> > > >
> > > > wrote:
> > > > > Hi Marek,
On 12/02/2015 03:18 PM, Stephen Warren wrote:
This tool aims to test U-Boot by executing U-Boot shell commands using the
console interface. A single top-level script exists to execute or attach
to the U-Boot console, run the entire script of tests against it, and
summarize the results. Advantages
From: Stephen Warren
Unfortunately U-Boot assumes that almost all numbers are in hex, including
partition numbers passed to e.g. "load". So, the command "part list mmc 0
-bootable devplist" should use hex when writing partition numbers into
$devplist, so they'll be correctly interpreted.
Change-
When doing a software reset, the reset flag should be written without
other bits set. Writing the current state will lead to restoring the
state of the PHY (e.g. Powerdown), which is not what is expected from
a software reset.
Signed-off-by: Stefan Agner
---
This lead to the PHY staying powered d
On Wed, Dec 09, 2015 at 11:21:25AM -0800, Stefan Agner wrote:
> When doing a software reset, the reset flag should be written without
> other bits set. Writing the current state will lead to restoring the
> state of the PHY (e.g. Powerdown), which is not what is expected from
> a software reset.
>
On Wed, Dec 09, 2015 at 05:55:05PM +0800, Bin Meng wrote:
> Hi Tom,
>
> This includes fixes to PCI UART on CrownBay and Galileo, minor changes
> to x86 timer and some clean up to ivybridge support.
>
> The following changes since commit 8555dd88cd1a7b5dd1e76c111fe635a92223b98b:
>
> axs10x: ad
For some board designs, it might be useful to switch the DC-DC
clock source to something else rather the default 24 MHz, e.g.
for EMI reasons.
For this, use something like this in your board configuration:
Signed-off-by: Michael Heimpold
Cc: Marek Vasut
Cc: Otavio Salvador
Cc: Fabio Estevam
-
Hi Michael,
On Wed, Dec 9, 2015 at 7:30 PM, Michael Heimpold wrote:
> For some board designs, it might be useful to switch the DC-DC
> clock source to something else rather the default 24 MHz, e.g.
> for EMI reasons.
>
> For this, use something like this in your board configuration:
It seems you
On Wednesday, December 09, 2015 at 10:30:46 PM, Michael Heimpold wrote:
> For some board designs, it might be useful to switch the DC-DC
> clock source to something else rather the default 24 MHz, e.g.
> for EMI reasons.
>
> For this, use something like this in your board configuration:
>
> Signe
Hi Tom,
On 8 December 2015 at 16:58, Tom Rini wrote:
>
> On Tue, Dec 08, 2015 at 04:42:17PM -0700, Simon Glass wrote:
> > Hi Tom,
> >
> > On Dec 8, 2015 4:28 PM, "Tom Rini" wrote:
> > >
> > > On Tue, Dec 08, 2015 at 12:35:23PM -0700, Simon Glass wrote:
> > > > Hi Tom,
> > > >
> > > > On 7 Decemb
On Thu, Dec 10, 2015 at 3:21 AM, Stefan Agner wrote:
> When doing a software reset, the reset flag should be written without
> other bits set. Writing the current state will lead to restoring the
> state of the PHY (e.g. Powerdown), which is not what is expected from
> a software reset.
>
> Signed
The function ext4fs_free_node() exists for dealing with "dirnode"
structures that we allocate. However, we do not allocate these
dynamically as needed but rather as a single instance in ext4fs_mount()
that we zalloc(). Coverity scan notes that in two places we're doing
what it calls a "Free of ad
On Wed, Dec 09, 2015 at 04:58:12PM -0700, Simon Glass wrote:
> Hi Tom,
>
> On 8 December 2015 at 16:58, Tom Rini wrote:
> >
> > On Tue, Dec 08, 2015 at 04:42:17PM -0700, Simon Glass wrote:
> > > Hi Tom,
> > >
> > > On Dec 8, 2015 4:28 PM, "Tom Rini" wrote:
> > > >
> > > > On Tue, Dec 08, 2015 at
On Mon, Dec 7, 2015 at 2:34 AM, Jagan Teki wrote:
> Intension is that sf_ops should deals all spi_flash
> related stuff and sf_probe (which should renamed future)
> should be an interface layer for spi_flash versus spi drivers.
>
> sf_ops => spi_flash interface
> sf_probe => interface layer vs spi
On Mon, Dec 7, 2015 at 2:34 AM, Jagan Teki wrote:
> Use static for file-scope functions and removed
> them from header files.
>
> Signed-off-by: Jagan Teki
> ---
> drivers/mtd/spi/sf_internal.h | 18 --
> drivers/mtd/spi/sf_ops.c | 11 ++-
> 2 files changed, 6 insert
On Mon, Dec 7, 2015 at 2:34 AM, Jagan Teki wrote:
> read_id code is related to spi_flash stuff
> hence moved to sf_ops.
>
> Reviewed-by: Simon Glass
> Signed-off-by: Jagan Teki
> ---
> drivers/mtd/spi/sf_internal.h | 3 +--
> drivers/mtd/spi/sf_ops.c | 21 ++---
> drivers/
On Mon, Dec 7, 2015 at 2:34 AM, Jagan Teki wrote:
> Rename spi_flash_validate_params to spi_flash_scan
> as this code not only deals with params setup but
> also configure all spi_flash attributes.
>
> And also moved all flash related code into
> spi_flash_scan for future functionality addition.
>
On Mon, Dec 7, 2015 at 2:34 AM, Jagan Teki wrote:
> Using macro's for flash power up read-only access code
> leads wrong behaviour hence use idcode0 for runtime
> detection, hence the flash which require this functionality
> gets detected at runtime.
>
> Reviewed-by: Simon Glass
> Signed-off-by:
On Mon, Dec 7, 2015 at 2:34 AM, Jagan Teki wrote:
> - Move bar read code below the bar write hance both
> at once place, hence it easy for #ifdef macro only
> once and readable.
> - Move read_cmd_array at top
>
> Reviewed-by: Simon Glass
> Signed-off-by: Jagan Teki
> ---
> drivers/mtd/spi/s
On Mon, Dec 7, 2015 at 2:34 AM, Jagan Teki wrote:
> Most of the register access function are static,
> so used simple name to represent each.
>
> Reviewed-by: Simon Glass
> Signed-off-by: Jagan Teki
> ---
> drivers/mtd/spi/sf_ops.c | 52
>
> 1 f
On Mon, Dec 7, 2015 at 2:34 AM, Jagan Teki wrote:
> SST parts added on sf_params.c supports both SST_WR which consits
> of both BP and WP and there is a spi controller ich which supports
> only BP so the relevent _write hook set based on "slave->op_mode_tx"
> hence there is no respective change re
On Mon, Dec 7, 2015 at 2:34 AM, Jagan Teki wrote:
> Since spi_slave is a spi pointer in spi_flash{} then assign
> spi_slave{} pointer to flash->spi and remove spi_slave
> pointer argument to
> - spi_flash_probe_slave
> - spi_flash_scan
>
> Cc: Simon Glass
> Signed-off-by: Jagan Teki
> ---
> dri
On Mon, Dec 7, 2015 at 2:34 AM, Jagan Teki wrote:
> Removed unneeded header includes in sf_ops and sf_probe
>
> Reviewed-by: Simon Glass
> Signed-off-by: Jagan Teki
> ---
> drivers/mtd/spi/sf_ops.c | 2 --
> drivers/mtd/spi/sf_probe.c | 3 ---
> 2 files changed, 5 deletions(-)
>
Reviewed-by:
On Wed, Dec 9, 2015 at 12:54 PM, Simon Glass wrote:
> On 6 December 2015 at 11:34, Jagan Teki wrote:
>> Since all spi-flash core operations are moved into
>> sf_ops.c then it's better to renamed as spi-flash.c
>>
>> Signed-off-by: Jagan Teki
>> ---
>> drivers/mtd/spi/Makefile |
On Mon, Dec 7, 2015 at 2:34 AM, Jagan Teki wrote:
> Used static for file-scope functions in sf_probe.c
>
> Cc: Simon Glass
> Signed-off-by: Jagan Teki
> ---
> drivers/mtd/spi/sf_probe.c | 10 +-
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
Reviewed-by: Bin Meng
Hi Mugunthan,
On Wed, Dec 2, 2015 at 5:50 PM, Mugunthan V N wrote:
> On Wednesday 02 December 2015 02:59 PM, Bin Meng wrote:
>> Hi Mugunthan,
>>
>> On Tue, Dec 1, 2015 at 10:39 AM, Bin Meng wrote:
>>> Hi Mugunthan,
>>>
>>> On Sun, Nov 29, 2015 at 9:16 PM, Mugunthan V N wrote:
On Saturday 2
Hi Heiko,
> -Original Message-
> From: Heiko Schocher [mailto:h...@denx.de]
> Sent: 2015年12月9日 18:01
> To: Yang, Wenyou
> Cc: U-Boot Mailing List ; andreas.de...@googlemail.com
> Subject: Re: [PATCH v2 0/5] ARM: at91: improve peripheral and system clock
> handle functions
>
> Hello Weny
On Tue, Dec 08, 2015 at 05:20:49PM +0100, Wolfgang Denk wrote:
> Dear Marek,
>
> In message <201512081439.50797.ma...@denx.de> you wrote:
> >
> > Please ignore, after discussing this on IRC, we decided on doing
> > s/CONFIG_ARMV7/CONFIG_CPU_V7/g instead.
>
> As IRC si (to the best or my knowled
On Wed, Dec 09, 2015 at 03:09:13PM +0100, Marek Vasut wrote:
> On Wednesday, December 09, 2015 at 02:02:03 PM, Stefan Roese wrote:
> > Hi All!
> >
> > On 09.12.2015 09:09, Albert ARIBAUD wrote:
> > > On Tue, 8 Dec 2015 14:43:42 +0100, Marek Vasut wrote:
> > >> The arch/arm/lib/cache-cp15.c check
To reduce the duplicated code, rework the peripheral's and
system's clock handle functions, use these functions to replace
the clock handle code.
Changes in v3:
- fix incorrectly used the indicator '&' to achieve the variable
pointer of pmc->pcer and pmc->pcdr.
Changes in v2:
- fix checkpatc
Remove unnecessary #ifdef CPU_HAS_PCR.
Signed-off-by: Wenyou Yang
---
Changes in v3: None
Changes in v2: None
arch/arm/mach-at91/include/mach/at91_pmc.h |8 ++--
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h
b/arch/arm/mach-at
To reduce the duplicated code, add a new file to accommodate
the peripheral's and system's clock handle code, shared with
the SoCs with different ARM core.
Signed-off-by: Wenyou Yang
---
Changes in v3:
- fix incorrectly used the indicator '&' to achieve the variable
pointer of pmc->pcer and
Due to introducing the new peripheral clock handle functions,
use these functions to clean up the duplicated code.
Meanwhile, remove unneeded header file include, at91_pmc.h.
Signed-off-by: Wenyou Yang
---
Changes in v3: None
Changes in v2: None
arch/arm/mach-at91/arm920t/at91rm9200_devices.c
Due to introducing the new peripheral clock handle functions,
use these functions to reduce duplicated code.
Signed-off-by: Wenyou Yang
---
Changes in v3: None
Changes in v2:
- fix checkpatch warning.
board/atmel/at91rm9200ek/at91rm9200ek.c |1 -
board/atmel/at91rm9200ek/led.c
Due to introducing the new peripheral clock handle functions,
use these functions to reduce the duplicated code.
Signed-off-by: Wenyou Yang
---
Changes in v3: None
Changes in v2: None
drivers/net/at91_emac.c |9 -
drivers/usb/host/ehci-atmel.c |8
drivers/usb/hos
On Thursday, December 10, 2015 at 03:27:08 AM, Tom Rini wrote:
> On Wed, Dec 09, 2015 at 03:09:13PM +0100, Marek Vasut wrote:
> > On Wednesday, December 09, 2015 at 02:02:03 PM, Stefan Roese wrote:
> > > Hi All!
> > >
> > > On 09.12.2015 09:09, Albert ARIBAUD wrote:
> > > > On Tue, 8 Dec 2015 14:
Hello Wenyou,
Am 10.12.2015 um 03:15 schrieb Yang, Wenyou:
Hi Heiko,
-Original Message-
From: Heiko Schocher [mailto:h...@denx.de]
Sent: 2015年12月9日 18:01
To: Yang, Wenyou
Cc: U-Boot Mailing List ; andreas.de...@googlemail.com
Subject: Re: [PATCH v2 0/5] ARM: at91: improve peripheral
Hi Heiko,
> -Original Message-
> From: Heiko Schocher [mailto:h...@denx.de]
> Sent: 2015年12月10日 14:02
> To: Yang, Wenyou
> Cc: U-Boot Mailing List ; andreas.de...@googlemail.com;
> Meier, Roger
> Subject: Re: [PATCH v2 0/5] ARM: at91: improve peripheral and system clock
> handle function
Hi Simon,
On 08.12.2015 03:46, Simon Glass wrote:
Hi Stefan,
On 4 December 2015 at 00:45, Stefan Roese wrote:
Hi Simon,
On 03.12.2015 18:21, Simon Glass wrote:
Hi Stefan,
On 3 December 2015 at 04:31, Stefan Roese wrote:
Hi Simon,
On 02.12.2015 18:45, Simon Glass wrote:
Hi Stefan,
On
From: Ying Zhang
The fuse status register provides the values from on-chip
voltage ID efuses programmed at the factory.
These values define the voltage requirements for
the chip. u-boot reads FUSESR and translates the values
into the appropriate commands to set the voltage output
value of an exte
From: Wang Dongsheng
Fix PSCI hang up without CONFIG_ARMV7_SECURE_BASE define.
"DISCARD" will remove ._secure.text relocate, but PSCI framework
has already used some absolute address those need to relocate.
Use readelf -t -r u-boot show us:
.__secure_start addr: 601408e4
.__secure_end
From: Shaohui Xie
Fixes lsch2 SerDes registers define according to LS1043A RM Rev D.
Signed-off-by: Shaohui Xie
---
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 67 +++---
1 file changed, 47 insertions(+), 20 deletions(-)
diff --git a/arch/arm/include/asm/arch-fsl-laye
86 matches
Mail list logo