Default enable device tree for mx6ul_14x14_evk and
mx6ul_9x9_evk board. And sort the defconfig file to be in
alphabet order.
Enable pinctrl driver for the two boards.
Signed-off-by: Peng Fan
Cc: Stefano Babic
Cc: Fabio Estevam
---
configs/mx6ul_14x14_evk_defconfig | 15 ++-
config
Convert to use DM_PMIC/DM_REGULATOR/DM_I2C for mx6ul evk.
To mx6ul_14x14_evk, there is no pmic on board, so only enable DM_I2C.
Since we have PINCTRL driver and DM_I2C enabled, we could discard
the pinmux setting in board file, but we can not do this, because
still some dependency in arch/arm/imx-
This patch set is to covert to enable pinctrl driver and
DM_PMIC and DM_REGULATOR for imx6ul 14x14/9x9 evk board.
This patch set is only to add device tree for i.MX6UL and
is just initial step to convert to support device tree for
i.MX6/7, I just have an idea to discard the pinmux settings
in boar
Return i2c mux to the default channel after accessing retimer.
Signed-off-by: Wenbin Song
---
Change for v2:
-Rework the commit message and the subject
---
board/freescale/ls1043aqds/ls1043aqds.c | 6 --
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/board/freescale/ls
Signed-off-by: Wenbin Song
---
Changes for v2:
-Rework the subject
---
include/configs/ls1043aqds.h | 10 ++
1 file changed, 10 insertions(+)
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 158cf02..e269522 100644
--- a/include/configs/ls1043aqds.h
IR chip is on one of the channels on multiplexed I2C-bus.
Reset to default channel after accessing.
Signed-off-by: Wenbin Song
---
Changes for v2:
-Rework the commit message and the tag int the subject.
---
board/freescale/common/vid.c | 12 +---
1 file changed, 9 insertions(+),
When the MMC framework was added in u-boot, the mmc_go_idle was
added before mmc_send_op_cond_iter in function mmc_send_op_cond
annotating that some cards seemed to need this. Actually, we still
need to do this in function mmc_complete_op_cond for those cards.
This has been verified on Micron MTFC4
Hi, Jagan,
> On 03/03/2016 01:06 PM, york sun wrote:
> > On 02/29/2016 04:26 AM, Jagan Teki wrote:
> >> Hi York,
> >>
> >> On 27 February 2016 at 02:14, york sun wrote:
> >>> On 02/22/2016 10:18 AM, Jagan Teki wrote:
>
>
>
>
> Can you pls- test the dataflash changes? use u-boot-spi/s
> -Original Message-
> From: Scott Wood [mailto:o...@buserror.net]
> Sent: Wednesday, March 09, 2016 1:02 AM
> To: Prabhakar Kushwaha ; u-
> b...@lists.denx.de
> Cc: york sun ; Priyanka Jain
> Subject: Re: [RFC] armv8: layerscape: Add support of u-boot device tree fix-
> up
>
> On Tue, 2
As QSPI driver is supported in ls1021aqds_sdcard_qspi_defconfig, SPI-NOR
with MTD uclass, CONFIG_MTD_DATAFLASH and new flash vendor config
CONFIG_SPI_NOR_SPANSION need be enabled.
Signed-off-by: Alison Wang
---
configs/ls1021aqds_sdcard_qspi_defconfig | 7 +--
1 file changed, 5 insertions(+)
As QSPI driver is supported in ls1021atwr_sdcard_qspi_defconfig,
CONFIG_MTD needs to be enabled for SPI-NOR with MTD uclass.
Signed-off-by: Alison Wang
---
configs/ls1021atwr_sdcard_qspi_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig
b/con
G'day George,
On 3/03/2016 10:57 PM, George Broz wrote:
On 2 March 2016 at 23:11, Phil Reid wrote:
On 3/03/2016 2:49 PM, George Broz wrote:
On 1 March 2016 at 19:49, Phil Reid wrote:
On 2/03/2016 10:40 AM, George Broz wrote:
Sorry for the delayed response - got called away, but am back
On Thu, Mar 03, 2016 at 09:34:13AM +0100, Stefan Roese wrote:
> These cyg_ prototypes are not referenced anywhere in current mainline
> U-Boot. So lets remove them.
>
> Signed-off-by: Stefan Roese
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
___
On Thu, Mar 03, 2016 at 09:34:12AM +0100, Stefan Roese wrote:
> The original name of this function is unclear. This patch renames this
> CRC16 function to crc16_ccitt() matching its name with its
> implementation.
>
> To make the usage of this function more flexible, lets add the CRC start
> valu
On Thu, Mar 03, 2016 at 09:34:11AM +0100, Stefan Roese wrote:
> lib/crc16.c is changed to match the common U-Boot coding-style.
>
> Signed-off-by: Stefan Roese
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
___
U-Boot m
On Sun, Mar 06, 2016 at 07:39:30PM -0700, Simon Glass wrote:
> Hi Joe,
>
> On 7 May 2015 at 03:17, Joe Hershberger wrote:
> > Hi Simon,
> >
> > Is there a way to make buildman compile sandbox with a non-system tool
> > chain? I've tried creating an alias from sandbox to i386 and removing
> > the
On Sun, Mar 06, 2016 at 07:27:45PM -0700, Simon Glass wrote:
> This is missing, with causes lldiv() to fail on boards with use the private
> libgcc. Add the missing routine.
>
> Code is available for using the CLZ instruction but it is not enabled at
> present.
Mention the rev of coreboot we pul
On Sat, Mar 05, 2016 at 02:07:44PM -0500, Tom Rini wrote:
> - The macro __BIGGEST_ALIGNMENT__ is gcc-specific. If it is not defined
> we'll just assume 16. This is correct for at least the common cases
> and LLVM does not provide an equivalent macro.
> - When linking U-Boot we're passing -T
On Sat, Mar 05, 2016 at 10:30:53AM -0700, Stephen Warren wrote:
> Following the previous patch, malloc() is never called before gd is set,
> so we can remove the special-case check for this condition.
>
> This reverts commit 854d2b9753e4 "dlmalloc: ensure gd is set for early
> alloc".
>
> Cc: Ra
On Sat, Mar 05, 2016 at 10:30:52AM -0700, Stephen Warren wrote:
> When running sandbox, the following phases occur, each with different
> malloc implementations or behaviors:
>
> 1) Dynamic linker execution, using the dynamic linker's own malloc()
> implementation. This is fully functional.
>
>
On Tue, Mar 01, 2016 at 09:56:34AM +0100, Alexander Graf wrote:
> Now that we fall back to the FS code path when we don't find u-boot
> at the raw sector offset, there is no good reason to not default to
> raw boot.
>
> With this patch, I can successfully boot u-boot from a raw sector
> offset on
On Tue, Mar 01, 2016 at 02:19:04PM +0200, Stanislav Galabov wrote:
> This patch makes the U-Boot api export its structure address as an environment
> variable, so it can be used to directly hint FreeBSD's loader of api's
> location.
>
> The relevant FreeBSD loader change is currently under revie
On Sat, Mar 05, 2016 at 01:19:59PM -0600, Derald D. Woods wrote:
> - Add required UBI/UBIFS config definitions
> - Add reasonable MTD partition layout
> - Remove JFFS2 config definitions
> - Drop some CFI verbage and definitions
> - Make comment 'one-liners' truly one line
> - Improve readability
On Sat, Mar 05, 2016 at 01:19:58PM -0600, Derald D. Woods wrote:
> Select 8-bit BCH ecc-scheme with s/w based error correction
> - OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
>
> Signed-off-by: Derald D. Woods
> Reviewed-by: Tom Rini
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Descriptio
Hi Masahiro,
On 8 March 2016 at 04:37, Masahiro Yamada wrote:
> We are generally supposed to implement SoC/board-specific SPL init
> code in spl_board_init(), but it is called after spl_init() where the
> FDT is setup and devices are bound.
>
> This new stub spl_early_board_init() would be useful
Hi Tom,
On 7 March 2016 at 16:37, Tom Rini wrote:
> On Sun, Mar 06, 2016 at 07:38:47PM -0700, Simon Glass wrote:
>> Hi Stephen,
>>
>> On 5 March 2016 at 23:26, Stephen Warren wrote:
>> >
>> > On 02/05/2016 09:19 PM, Stephen Warren wrote:
>> >>
>> >> On 02/05/2016 02:43 PM, Eric Anholt wrote:
>>
On 8 March 2016 at 02:19, Masahiro Yamada wrote:
>
> The serial output from the debug UART carries on going far to the
> right in the console.
>
> Signed-off-by: Masahiro Yamada
> ---
>
> include/debug_uart.h | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
Reviewed-by: Simon Glass
On 7 March 2016 at 20:08, Adam Ford wrote:
> A few boards still use ns16550_platdata structures, but assume the structure
> is going to be in a specific order. By explicitly naming each entry,
> this should also help 'future-proof' in the event the structure changes.
>
> Tested on the Logic PD Tor
Hi Stefan,
On 8 March 2016 at 10:41, Stefan Roese wrote:
> Hi Simon,
>
> On 08.03.2016 17:54, Simon Glass wrote:
>> Hi Stefan,
>>
>> On 8 March 2016 at 09:45, Stefan Roese wrote:
>>> Hi Simon, Hi Bin,
>>>
>>> On 12.08.2015 05:54, Simon Glass wrote:
+Gabriel
Hi Andrew,
On
On Tue, Mar 8, 2016 at 7:48 PM, Akshay Bhat wrote:
> If there are no further review comments, can this patch be applied in the
> next merge window (for v2016.05)?
>
> Also I have couple updates to the bx50v3.c file. Should I wait for this
> patch to be applied before sending a new patch with the
On Tue, Mar 08, 2016 at 08:34:44PM +0900, Masahiro Yamada wrote:
> To make SPL_OF_CONTROL work on ARM64 SoCs, _image_binary_end must be
> defined in the linker script.
>
> LD spl/u-boot-spl
> lib/built-in.o: In function `fdtdec_setup':
> lib/fdtdec.c:1186: undefined reference to `_image_bin
On Tue, Mar 08, 2016 at 08:37:16PM +0900, Masahiro Yamada wrote:
> We are generally supposed to implement SoC/board-specific SPL init
> code in spl_board_init(), but it is called after spl_init() where the
> FDT is setup and devices are bound.
>
> This new stub spl_early_board_init() would be use
Hi Stefano,
On 01/29/2016 11:07 PM, Peng Fan wrote:
Hi Akshay,
On Fri, Jan 29, 2016 at 03:16:40PM -0500, Akshay Bhat wrote:
Add support for GE B450v3, B650v3 and B850v3 boards. The boards
are based on Advantech BA16 module which has a i.MX6D processor.
The boards support:
- FEC Ethernet
- USB
On Mon, Mar 07, 2016 at 03:50:11PM +0200, Siarhei Siamashka wrote:
> On Mon, 7 Mar 2016 13:44:11 +0100
> Maxime Ripard wrote:
>
> > From: Boris Brezillon
> >
> > Unlike the datasheet recommendation, the R8 SoC requires a 1.4V supply
> > for its CPU when operating at 1Ghz.
>
> That's interesti
From: Stuart Yoder
Remove stream ID partitioning support that has been made
obsolete by upstream device tree bindings that specify how
representing how PCI requester IDs are mapped to MSI specifiers
and SMMU stream IDs.
Signed-off-by: Stuart Yoder
---
-v5: no change
arch/arm/cpu/armv8/fsl-lay
From: Stuart Yoder
-update comments around how stream IDs are partitioned
-stream IDs allocated to PCI are no longer divided up by
controller, but are instead a contiguous range
Signed-off-by: Stuart Yoder
---
-v5: no change
.../asm/arch-fsl-layerscape/ls2080a_stream_id.h| 55
From: Stuart Yoder
msi-map properties are used to tell an OS how PCI requester
IDs are mapped to ARM SMMU stream IDs. This patch defines a
function to append a single msi-map entry to a given PCI controller
device tree node.
Signed-off-by: Stuart Yoder
---
-v5: no change
drivers/pci/pcie_lay
From: Stuart Yoder
The per-PCI controller LUT (Look-Up-Table) is a 32-entry table
that maps PCI requester IDs (bus/dev/fun) to a stream ID.
This patch implements infrastructure to enable LUT initialization:
-define registers offsets
-add an index to 'struct ls_pcie' to track next available s
On Tue, Mar 08, 2016 at 10:10:20AM +0530, Lokesh Vutla wrote:
> All the mux configurations needs to be done as part of the IODelay
> sequence to avoid glitch. Adding all the mux configuration, MANUAL/VIRTUAL
> mode configuration as needed for DRA72-evm.
>
> Also update the mux for SD card detect
On Wed, Mar 09, 2016 at 01:18:19AM +0900, Masahiro Yamada wrote:
> Hi Tom,
>
> This is probably the last PR from me for the v2016.03 release.
> It includes some bug fixes and a minor document update.
>
>
> The following changes since commit 08b24722f0ac9159697360faed35d12852592eb3:
>
> Merge
> -Original Message-
> From: york sun
> Sent: Tuesday, March 08, 2016 1:46 PM
> To: Stuart Yoder ; u-boot@lists.denx.de
> Cc: Prabhakar Kushwaha ; Yang-Leo Li
>
> Subject: Re: [PATCH 4/7 v4] pci/layerscape: add support for LUT
>
> On 03/08/2016 11:36 AM, Stuart Yoder wrote:
> >
> >
> >
> -Original Message-
> From: york sun
> Sent: Tuesday, March 08, 2016 11:30 AM
> To: Stuart Yoder ; u-boot@lists.denx.de
> Cc: Prabhakar Kushwaha ; Yang-Leo Li
>
> Subject: Re: [PATCH 4/7 v4] pci/layerscape: add support for LUT
>
> On 03/08/2016 07:56 AM, Stuart Yoder wrote:
> > From:
On 03/08/2016 11:36 AM, Stuart Yoder wrote:
>
>
>> -Original Message-
>> From: york sun
>> Sent: Tuesday, March 08, 2016 11:30 AM
>> To: Stuart Yoder ; u-boot@lists.denx.de
>> Cc: Prabhakar Kushwaha ; Yang-Leo Li
>>
>> Subject: Re: [PATCH 4/7 v4] pci/layerscape: add support for LUT
>>
>
On Tue, 2016-02-23 at 04:09 +, Prabhakar Kushwaha wrote:
> > -Original Message-
> > From: Scott Wood [mailto:o...@buserror.net]
> > Sent: Tuesday, February 23, 2016 6:52 AM
> > To: Prabhakar Kushwaha ; u-
> > b...@lists.denx.de
> > Cc: york sun ; Priyanka Jain
> > Subject: Re: [RFC] ar
On 2016-03-05, FUKAUMI Naoki wrote:
> on v2016.03-rc3, size of SPL image compiled by gcc 5.3.0 is too large for
> Firefly-RK3288. (it's fine for Rock2)
...
> to reduce size of SPL image, this patch makes configure_emmc() empty for
> Firefly-RK3288 as same as Rock2.
>
> Signed-off-by: FUKAUMI Naoki
Shengzhou,
On 03/07/2016 10:01 PM, Shengzhou Liu wrote:
> During the initial DDR training, false parity errors may be detected.
> This can lead to the ERR_DETECT[APE], ERR_DETECT[MME] bits getting
> set during DDR training and the DDR could enter a bad state to try
> and recover since it thinks a
Shengzhou,
Subject is inaccurate. Not only UDIMM for DDR4.
On 03/07/2016 10:01 PM, Shengzhou Liu wrote:
> Add support of command/address parity for DDR4 UDIMM or discrete memory.
> It requires to configurate corresponding MR5[2:0] and TIMING_CFG_7[PAR_LAT].
> Parity can be turned on/off by hwconf
Hi Simon,
On 08.03.2016 17:54, Simon Glass wrote:
> Hi Stefan,
>
> On 8 March 2016 at 09:45, Stefan Roese wrote:
>> Hi Simon, Hi Bin,
>>
>> On 12.08.2015 05:54, Simon Glass wrote:
>>> +Gabriel
>>>
>>> Hi Andrew,
>>>
>>> On 11 August 2015 at 09:20, Andrew Bradford
>>> wrote:
Hi Simon,
On 03/08/2016 07:56 AM, Stuart Yoder wrote:
> From: Stuart Yoder
>
> The per-PCI controller LUT (Look-Up-Table) is a 32-entry table
> that maps PCI requester IDs (bus/dev/fun) to a stream ID.
>
> This patch implements infrastructure to enable LUT initialization:
> -define registers offsets
>
Hi Stefan,
On 8 March 2016 at 09:45, Stefan Roese wrote:
> Hi Simon, Hi Bin,
>
> On 12.08.2015 05:54, Simon Glass wrote:
>> +Gabriel
>>
>> Hi Andrew,
>>
>> On 11 August 2015 at 09:20, Andrew Bradford
>> wrote:
>>> Hi Simon,
>>>
>>> On 08/11 08:06, Simon Glass wrote:
Hi Andrew,
On
Hi Simon, Hi Bin,
On 12.08.2015 05:54, Simon Glass wrote:
> +Gabriel
>
> Hi Andrew,
>
> On 11 August 2015 at 09:20, Andrew Bradford
> wrote:
>> Hi Simon,
>>
>> On 08/11 08:06, Simon Glass wrote:
>>> Hi Andrew,
>>>
>>> On 11 August 2015 at 06:08, Andrew Bradford
>>> wrote:
Hi Simon,
Hi Tom,
This is probably the last PR from me for the v2016.03 release.
It includes some bug fixes and a minor document update.
The following changes since commit 08b24722f0ac9159697360faed35d12852592eb3:
Merge branch 'master' of git://git.denx.de/u-boot-usb (2016-03-04
20:53:50 -0500)
are av
2016-03-07 20:29 GMT+09:00 Masahiro Yamada :
> This function should just return for unknown SoCs rather than writing
> unexpected values to registers.
>
> Signed-off-by: Masahiro Yamada
Applied to u-boot-uniphier/master.
--
Best Regards
Masahiro Yamada
__
2016-03-04 15:56 GMT+09:00 Masahiro Yamada :
> CONFIG_PINCTRL_UNIPHIER is more suitable than CONFIG_ARCH_UNIPHIER
> to guard the drivers/pinctrl/uniphier directory.
>
> The current CONFIG_PINCTRL_UNIPHIER_CORE is a bit long, so rename it
> into CONFIG_PINCTRL_UNIPHIER.
>
> Signed-off-by: Masahiro Y
2016-03-04 15:56 GMT+09:00 Masahiro Yamada :
> While IECTRL is disabled, input signals are pulled-down internally.
> If pin-muxing is set up first, glitch signals (Low to High transition)
> might be input to hardware blocks.
>
> Bad case scenario:
> [1] The hardware block is already running before
2016-03-04 15:54 GMT+09:00 Masahiro Yamada :
> The build fails if compiled with CONFIG_CMD_DDRMPHY_DUMP=y since commit
> 46abfcc99e04 ("ARM: uniphier: rework struct uniphier_board_data").
>
> Fixes: 46abfcc99e04 ("ARM: uniphier: rework struct uniphier_board_data")
> Signed-off-by: Masahiro Yamada
2016-03-01 13:10 GMT+09:00 Masahiro Yamada :
> Signed-off-by: Masahiro Yamada
Applied to u-boot-uniphier/master.
--
Best Regards
Masahiro Yamada
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Tue, Mar 08, 2016 at 10:10:20AM +0530, Lokesh Vutla wrote:
> All the mux configurations needs to be done as part of the IODelay
> sequence to avoid glitch. Adding all the mux configuration, MANUAL/VIRTUAL
> mode configuration as needed for DRA72-evm.
>
> Also update the mux for SD card detect
From: Stuart Yoder
put pci_get_hose_head() prototype in header so it is available to
external users-- allowing them to find and iterate over all pci controllers
Signed-off-by: Stuart Yoder
---
-v4: no changes
include/pci.h |1 +
1 file changed, 1 insertion(+)
diff --git a/include/pci.h b
From: Stuart Yoder
The per-PCI controller LUT (Look-Up-Table) is a 32-entry table
that maps PCI requester IDs (bus/dev/fun) to a stream ID.
This patch implements infrastructure to enable LUT initialization:
-define registers offsets
-add an index to 'struct ls_pcie' to track next available s
From: Stuart Yoder
A binding for PCI nodes has been finalized specifying how PCI
device IDs can be mapped to MSI specifiers. See
Documentation/devicetree/bindings/pci/pci-msi.txt in the kernel.
For ls2080a and similar Layerscape SoCs, the MSI specifier is the stream
id. A programmable table (L
From: Stuart Yoder
Remove stream ID partitioning support that has been made
obsolete by upstream device tree bindings that specify how
representing how PCI requester IDs are mapped to MSI specifiers
and SMMU stream IDs.
Signed-off-by: Stuart Yoder
---
-v4: no changes
arch/arm/cpu/armv8/fsl-la
From: Stuart Yoder
for all PCI devices discovered in a system:
-allocate a LUT (look-up-table) entry in that PCI controller
-allocate a stream ID for the device
-program and enable a LUT entry (maps PCI requester id to stream ID)
-set the msi-map property on the controller reflecting the
From: Stuart Yoder
add a function to return the next available stream ID
for PCI
Signed-off-by: Stuart Yoder
---
-v4: no changes
drivers/pci/pcie_layerscape.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c
index
From: Stuart Yoder
msi-map properties are used to tell an OS how PCI requester
IDs are mapped to ARM SMMU stream IDs. This patch defines a
function to append a single msi-map entry to a given PCI controller
device tree node.
Signed-off-by: Stuart Yoder
---
-v4: no changes
drivers/pci/pcie_la
On Tue, Mar 08, 2016 at 06:42:27PM +0700, Semen Protsenko wrote:
> From: Sam Protsenko
>
> Use 8-bit access instead of 4-bit to speed up eMMC flashing speed.
>
> Signed-off-by: Sam Protsenko
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
___
On Tue, Mar 08, 2016 at 06:42:26PM +0700, Semen Protsenko wrote:
> From: Sam Protsenko
>
> serial# variable is used to correctly display device ID in
> "fastboot devices".
>
> Signed-off-by: Sam Protsenko
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
_
On Tue, Mar 08, 2016 at 06:42:25PM +0700, Semen Protsenko wrote:
> From: Sam Protsenko
>
> "fastboot oem format" command reuses "gpt write" command, which in turn
> requires correct partitions defined in $partitions variable. This patch
> adds such definition of Android partitions for AM57XX EVM
> -Original Message-
> From: york sun
> Sent: Monday, March 07, 2016 4:32 PM
> To: Stuart Yoder ; u-boot@lists.denx.de
> Cc: Prabhakar Kushwaha ; Mingkai Hu
> ;
> Minghuan Lian ; Yang-Leo Li ;
> marc.zyng...@arm.com
> Subject: Re: [PATCH 4/7 v3] pci/layerscape: add support for LUT
>
> O
On Tue, Mar 08, 2016 at 06:42:24PM +0700, Semen Protsenko wrote:
> From: Sam Protsenko
>
> Enable fastboot by default for AM57XX EVM.
>
> This is based on following patch modified accordingly:
> http://git.omapzoom.org/?p=repo/u-boot.git;a=commit;h=b2e04f92b5d91c708b6fd6b79d2266966ac51f4b
>
>
On Tue, Mar 08, 2016 at 06:42:22PM +0700, Semen Protsenko wrote:
>
> Hi All,
>
> This patch series add Fastboot support to TexasInstruments AM57XX EVM board
> and
> improves eMMC support. The most of code was borrowed from DRA7 EVM (since
> this board is very similar to DRA7 EVM).
>
> Next comm
On Tuesday 08 March 2016 05:12 PM, Semen Protsenko wrote:
> From: Sam Protsenko
>
> Use 8-bit access instead of 4-bit to speed up eMMC flashing speed.
Reviewed-by: Lokesh Vutla
Thanks and regards,
Lokesh
>
> Signed-off-by: Sam Protsenko
> ---
> include/configs/am57xx_evm.h | 1 +
> 1 fil
On Tuesday 08 March 2016 05:12 PM, Semen Protsenko wrote:
> From: Sam Protsenko
>
> Enable fastboot by default for AM57XX EVM.
>
> This is based on following patch modified accordingly:
> http://git.omapzoom.org/?p=repo/u-boot.git;a=commit;h=b2e04f92b5d91c708b6fd6b79d2266966ac51f4b
Also menti
On Tuesday 08 March 2016 05:12 PM, Semen Protsenko wrote:
> From: Sam Protsenko
>
> Enable dwc3, dwc3-omap and PHY for dwc3.
> Also enable USB gadget.
Reviewed-by: Lokesh Vutla
Thanks and regards,
Lokesh
>
> Signed-off-by: Sam Protsenko
> ---
> include/configs/am57xx_evm.h | 14 +
In order to avoid effecting some i2c devices
mounted on default channel, return the default
channel after retimer initialization.
Signed-off-by: Wenbin Song
---
board/freescale/ls1043aqds/ls1043aqds.c | 6 --
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/board/freescale/ls104
If the IR chip is connected to one of the channel of I2C-bus
multiplexer, Set to the default channel after accessing the IR chip.
Signed-off-by: Wenbin Song
---
board/freescale/common/vid.c | 12 +---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/board/freescale/common/vi
Signed-off-by: Wenbin Song
---
include/configs/ls1043aqds.h | 10 ++
1 file changed, 10 insertions(+)
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 158cf02..e269522 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -114,6 +11
On Tue, Mar 08, 2016 at 09:07:28AM +0530, Lokesh Vutla wrote:
> On Tuesday 08 March 2016 05:06 AM, Tom Rini wrote:
> > On Sat, Mar 05, 2016 at 05:32:27PM +0530, Lokesh Vutla wrote:
> >
> >> This series fixes miscellaneous bugs for the emif driver.
> >>
> >> Lokesh Vutla (4):
> >> ARM: DRA7: emi
On Tuesday 08 March 2016 05:12 PM, Semen Protsenko wrote:
> From: Sam Protsenko
>
> Use eMMC (instead of SD card) to store U-Boot environment.
Any specific reason why you want this change?
Thanks and regards,
Lokesh
>
> Signed-off-by: Sam Protsenko
> ---
> include/configs/am57xx_evm.h | 1
From: Sam Protsenko
Use 8-bit access instead of 4-bit to speed up eMMC flashing speed.
Signed-off-by: Sam Protsenko
---
include/configs/am57xx_evm.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index d075d61..1ab9498 100644
---
From: Sam Protsenko
Use eMMC (instead of SD card) to store U-Boot environment.
Signed-off-by: Sam Protsenko
---
include/configs/am57xx_evm.h | 12 +++-
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index 1ab949
From: Sam Protsenko
serial# variable is used to correctly display device ID in
"fastboot devices".
Signed-off-by: Sam Protsenko
---
board/ti/am57xx/board.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 042f9ab..751de39 100644
--- a/
Hi All,
This patch series add Fastboot support to TexasInstruments AM57XX EVM board and
improves eMMC support. The most of code was borrowed from DRA7 EVM (since
this board is very similar to DRA7 EVM).
Next commands were tested:
- fastboot devices
- fastboot getvar
- fastboot oem format
From: Sam Protsenko
"fastboot oem format" command reuses "gpt write" command, which in turn
requires correct partitions defined in $partitions variable. This patch
adds such definition of Android partitions for AM57XX EVM board.
By default $partitions variable contains Linux partition table. In
From: Sam Protsenko
Enable fastboot by default for AM57XX EVM.
This is based on following patch modified accordingly:
http://git.omapzoom.org/?p=repo/u-boot.git;a=commit;h=b2e04f92b5d91c708b6fd6b79d2266966ac51f4b
Signed-off-by: Sam Protsenko
---
include/configs/am57xx_evm.h | 11 +++
From: Sam Protsenko
Enable dwc3, dwc3-omap and PHY for dwc3.
Also enable USB gadget.
Signed-off-by: Sam Protsenko
---
include/configs/am57xx_evm.h | 14 ++
1 file changed, 14 insertions(+)
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index 6308cab..9191
We are generally supposed to implement SoC/board-specific SPL init
code in spl_board_init(), but it is called after spl_init() where the
FDT is setup and devices are bound.
This new stub spl_early_board_init() would be useful to put something
really SoC-specific, for example, debug_uart_init().
I
To make SPL_OF_CONTROL work on ARM64 SoCs, _image_binary_end must be
defined in the linker script.
LD spl/u-boot-spl
lib/built-in.o: In function `fdtdec_setup':
lib/fdtdec.c:1186: undefined reference to `_image_binary_end'
lib/fdtdec.c:1186: undefined reference to `_image_binary_end'
make[1]
Hi,
On 25-02-16 08:31, Ing. Damiano Bolla wrote:
Good morning Peng
I did revert the commit, see attached image showing git repository status
Unfortunately the result is still negative, see the following log
U-Boot 2016.03-rc2-00117-gde889c0 (Feb 25 2016 - 08:12:50 +0100) Allwinner
Technology
Hi Marek,
> What do you mean by this ? Is your ethernet controller synthesised in
> the FPGA ? The arriaV socdk u-boot uses the top-side ethernet port,
> which is connected to the ethernet controller in the HPS.
I managed to get it working.
Right after configuring fpga from Linux I made a soft re
On 08.03.2016 10:19, Masahiro Yamada wrote:
The serial output from the debug UART carries on going far to the
right in the console.
Signed-off-by: Masahiro Yamada
Yes, this has bugged me as well a few times as well. Thanks!
Reviewed-by: Stefan Roese
Thanks,
Stefan
The serial output from the debug UART carries on going far to the
right in the console.
Signed-off-by: Masahiro Yamada
---
include/debug_uart.h | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/include/debug_uart.h b/include/debug_uart.h
index 5d5349b..0d640b9 100644
--- a/
92 matches
Mail list logo
