Hi Stefan,
Well done!
On Thu, Sep 29, 2016 at 5:34 PM, Stefan Roese wrote:
> Booting Linux kernel v4.7+ does not work since commit 974f221c
Please specify this is Linux kernel commit.
> "x86/boot: Move compressed kernel to the end of the decompression buffer".
>
> This patch adds the latest ve
Hi Stefano,
On Wed, Sep 28, 2016 at 11:57 PM, Jagan Teki wrote:
> From: Jagan Teki
>
> This series supports Engicam i.CoreM6 QDL modules on top of
> u-boot-imx.git/next
> and test on the respective starter kits as well.
>
> Tested both MMC and NAND boot.
>
> Changes for v5:
> - Add NAND
The topic-miami SoMs contain a Zynq xc7z015 or xc7z030 SoC, 1GB DDR3L RAM,
32MB QSPI NOR flash and 256MB NAND flash.
The topic-miamiplus SoMs contain a Zynq xc7z035, xc7z045 or xc7z100 SoC,
2x 1GB DDR3L RAM, 64MB dual-parallel QSPI flash, clock sources
and a fan controller.
The "Florida" carrier
Now we can use compiler wrapper such as ccache or distcc for buildman.
Signed-off-by: York Sun
CC: Simon Glass
---
This is not perfect and may need some improvement. Something I didn't figure
out is how to drop the name under [toolchain-wrapper]. I intended to have this
format but bsettings.GetI
Hello Simon,
On Thu, 29 Sep 2016 14:23:02 -0600
Simon Glass wrote:
> Move these option to Kconfig and tidy up existing uses.
>
> Signed-off-by: Simon Glass
> ---
>
> Changes in v3: None
> Changes in v2:
> - Change CONFIG_PRE_CON_BUF_SZ default to 4096
> - Change CONFIG_PRE_CON_BUF_SZ to 'int'
Enables driver model flag CONFIG_DM_USB for LS1043A
platform defconfigs.
Signed-off-by: Sriram Dash
---
configs/ls1043aqds_defconfig | 1 +
configs/ls1043aqds_lpuart_defconfig | 1 +
configs/ls1043aqds_nand_defconfig| 1 +
configs/ls1043aqds_nor_ddr3_defconfig| 1 +
Add the USB node for LS1043 in dts.
Signed-off-by: Sriram Dash
---
arch/arm/dts/fsl-ls1043a.dtsi | 21 +
1 file changed, 21 insertions(+)
diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi
index a8bffba..f038f96 100644
--- a/arch/arm/dts/fsl-ls1043a.d
Signed-off-by: York Sun
CC: Simon Glass
---
The duplicated code seems to exist since the beginning of buildman.
tools/buildman/builderthread.py | 4
1 file changed, 4 deletions(-)
diff --git a/tools/buildman/builderthread.py b/tools/buildman/builderthread.py
index c512d3b..16e87f3 100644
2016-09-27 22:41 GMT-07:00 Mike Looijmans :
> The Zynq/ZynqMP boot.bin file contains a region for register initialization
> data. Filling in proper values in this table can reduce boot time
> (e.g. about 50ms faster on QSPI boot) and also reduce the size of
> the SPL binary.
>
> The table is a sim
Enable the CONFIG_DM_USB in defconfigs and add the usb node
in dts for LS1043
Sriram Dash (2):
armv8: ls1043: Enable CONFIG_DM_USB in defconfigs
armv8: ls1043: Add USB node in dts for ls1043
arch/arm/dts/fsl-ls1043a.dtsi| 21 +
configs/ls1043aqds_defconfig
On 29 September 2016 at 03:34, Stefan Roese wrote:
>
> Booting Linux kernel v4.7+ does not work since commit 974f221c
> "x86/boot: Move compressed kernel to the end of the decompression buffer".
>
> This patch adds the latest version of the setup_header struct, adding
> "init_size" which is needed
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
README | 3 ---
common/Kconfig | 9 +
configs/MIP405T_de
2016-09-27 22:46 GMT-07:00 Mike Looijmans :
> Add a string description for SYS_VENDOR to allow configuring boards from
> other vendors than just "xilinx".
>
> Signed-off-by: Mike Looijmans
> ---
> This patch is needed to support a set of Zynq and ZynqMP boards
>
> arch/arm/mach-zynq/Kconfig | 1
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_INFO_QUIET
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2:
- Make CONFIG_SYS_CONSOLE_INFO_QUIET the default if !CONFIG_MUX
Reviewed-by: Heiko Schocher
We have a number of OlinuXino Lime2 boards (both NAND and eMMC versions)
which were experiencing sporadic hangs. After testing with some heavy
benchmarking and help from the Armbian forum, it was pinned down as the
DRAM settings for the board. The default is 480MHz, but this is unstable,
and even t
Hi all,
I am trying to port U-boot for Gumstix verdex pxa270 board. Could anyone
having this board help me test the patches?
Regards,
Raashid
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
Reviewed-by: Heiko Schocher
bye,
Heiko
--
DENX Software
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This converts the following to Kconfig:
CONFIG_LCD
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
Reviewed-by: Heiko Schocher
bye,
Heiko
--
DENX Software Engineering GmbH, Man
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This is not used in U-Boot. Drop it.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
include/configs/edminiv2.h | 1 -
include/configs/km/km_arm.h| 1 -
include/configs/
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This should be defined in a header file so that arguments are checked.
Move it to video.h.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
board/liebherr/lwmon5/lwmon5.c | 1 +
board/mo
Hi Patrick,
On 29 September 2016 at 00:24, Patrick Brünn wrote:
>>From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon Glass
>>Sent: Mittwoch, 28. September 2016 19:52
>>Subject: Re: [PATCH] arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
>>
>>Hi,
> Hi Simon,
> thanks for the fast f
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This converts the following to Kconfig:
CONFIG_CONSOLE_EXTRA_INFO
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
configs/MIP405T_defconfig| 1 +
configs/MIP405_defconfi
Hello Andreas,
Am 17.08.2016 um 09:13 schrieb Heiko Schocher:
This series add some missing things for an at91sam9g15
board, which gets not mainlined, but there are common
fixes, which are posted with this patchserie.
2 important things:
- enable icache for AT91 based boards
speeds up them a
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This converts the following to Kconfig:
CONFIG_VIDEO_SW_CURSOR
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
Reviewed-by: Heiko Schocher
bye,
Heiko
--
DENX Software Engineering Gm
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This is not used in U-Boot.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
Reviewed-by: Heiko Schocher
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang De
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This converts the following to Kconfig:
CONFIG_VGA_AS_SINGLE_DEVICE
Once we migrate to driver model for video, we should be able to drop this
option.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2: None
Reviewed
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This is not used in U-Boot.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
README | 5 -
drivers/video/Makefile | 1 -
drivers/video/cfb_console.c |
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This is not used in U-Boot.
Signed-off-by: Simon Glass
Acked-by: Minkyu Kang
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
drivers/video/Makefile | 1 -
drivers/video/cfb_console.c | 2 +-
drivers/vid
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This is not used in U-Boot anymore.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
README | 6 -
drivers/video/Makefile | 1 -
drivers/video/cfb_console
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This is not used anywhere in U-Boot.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
drivers/video/Makefile| 1 -
drivers/video/imx25lcdc.c | 121 --
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_BG_COL
CONFIG_SYS_CONSOLE_FG_COL
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
README | 5 ---
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This converts the following to Kconfig:
CONFIG_VIDEO_CT69000
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
README | 23 ---
configs/MIP405
The series adds support for Palmas family of PMICs.
Implements functions to configure regulators. Enable/Disable
Get/Set voltages of regulators.
Supports TPS659038, TPS65917, Palmas.
Tested on TPS659038, TPS65917 using DRA7XX-EVM and AM57XX-EVM.
Changes in v5:
removed u8 i2c read/write function
The driver provides regulator set/get voltage
enable/disable functions for lp873x family of PMICs.
Signed-off-by: Keerthy
Reviewed-by: Simon Glass
---
Changes in v2:
* Used pmic_reg_read/pmic_reg_write instead of direct i2c
read/write calls.
drivers/power/regulator/Kconfig|
Add support to bind the regulators/child nodes with the pmic.
Signed-off-by: Keerthy
Reviewed-by: Simon Glass
---
Changes in v3:
* Used dm_i2c_write and dm_i2c_read in place of dm_i2c_reg_write
dm_i2c_reg_read respectively.
Changes in v2:
* Added pmic read/write functions.
drivers/
Enable CMD_REG option.
Signed-off-by: Keerthy
---
configs/am57xx_evm_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
index 6c60d9b..38424e6 100644
--- a/configs/am57xx_evm_defconfig
+++ b/configs/am57xx_evm_defconfig
@@
Hi Keethy,
On 29 September 2016 at 00:11, Keerthy wrote:
>
>
> On Thursday 29 September 2016 11:32 AM, Keerthy wrote:
>>
>>
>>
>> On Wednesday 28 September 2016 11:21 PM, Simon Glass wrote:
>>>
>>> Hi Keerthy,
>>>
>>> On 27 September 2016 at 22:27, Keerthy wrote:
Add support to bind th
The series adds support for LP873X family of PMICs.
Implements functions to configure regulators. Enable/Disable
Get/Set voltages of regulators.
Keerthy (2):
power: pmic: lp873x: Add the base pmic support
power: regulator: lp873x: Add regulator support
drivers/power/pmic/Kconfig
On 09/29/2016 08:59 PM, Masahiro Yamada wrote:
> 2016-09-30 0:47 GMT+09:00 york sun :
>> On 09/28/2016 12:17 PM, Simon Glass wrote:
>>> +Masahiro, who may know
>>
>> Masahiro,
>>
>> Need some advise on this. How do we deal with duplicated config?
>>
>> York
>>
>>>
>>> On 28 September 2016 at 12:57,
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This converts the following to Kconfig:
CONFIG_CFB_CONSOLE_ANSI
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
Reviewed-by: Heiko Schocher
bye,
Heiko
--
DENX Software Engineering G
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This converts the following to Kconfig:
CONFIG_CFB_CONSOLE
Signed-off-by: Simon Glass
---
Changes in v3:
- Change CONFIG_CFB_CONSOLE to default y if CONFIG_VIDEO
Changes in v2: None
Reviewed-by: Heiko Schocher
bye,
Heiko
--
DE
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
These two files have patch merge markers in them, within comments or
strings. Remove then, so that a search for merge markers does not show up
matches in these files.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3:
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This converts the following to Kconfig:
CONFIG_VIDEO
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
Reviewed-by: Heiko Schocher
bye,
Heiko
--
DENX Software Engineering GmbH, M
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This is not really a config. Rename it to avoid confusion.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
include/configs/advantech_dms-ba16.h | 4 ++--
include/configs/aristainetos-co
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
Move these option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2:
- Change CONFIG_PRE_CON_BUF_SZ default to 4096
- Change CONFIG_PRE_CON_BUF_SZ to 'int' type
- Drop the depend clau
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
This is not really a config. Rename it to avoid confusion.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
include/configs/MPC8349ITX.h | 6 +++---
scripts/config_whitelist.txt | 1 -
2
2016-09-30 0:47 GMT+09:00 york sun :
> On 09/28/2016 12:17 PM, Simon Glass wrote:
>> +Masahiro, who may know
>
> Masahiro,
>
> Need some advise on this. How do we deal with duplicated config?
>
> York
>
>>
>> On 28 September 2016 at 12:57, york sun wrote:
>>> On 09/27/2016 10:55 AM, Simon Glass wr
Hello Simon,
Am 29.09.2016 um 22:23 schrieb Simon Glass:
Move these option to Kconfig and tidy up existing uses.
The Power PC boards don't have a suitable common element: the common header
files don't appear to line up with the Kconfig files as far as I can tell.
This results in a lot of defcon
The driver provides regulator set/get voltage
enable/disable functions for palmas family of PMICs.
Signed-off-by: Keerthy
Reviewed-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v5:
* Used pmic_reg_read pmic_reg_write functions instead of
direct i2c calls.
drivers/power/regulato
Add support to bind the regulators/child nodes with the pmic.
Also adds the pmic i2c based read/write funtions to access pmic
registers.
Signed-off-by: Keerthy
Reviewed-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v6:
* Used dm_i2c_write and dm_i2c_read in place of dm_i2c_reg_write
As soon as a mapping is unlinked from the list, there are no further
references to it, so it should be freed. If it not unlinked,
update the start address and length.
Signed-off-by: Stefan Brüns
---
lib/efi_loader/efi_memory.c | 7 +--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --
The ctrl reg contains bit fields to enable and disable regulators,
and volt_reg has the bit fields to configure the voltage values.
The registers are frequently accessed hence make them part
of dm_regulator_uclass_platdata structure.
Signed-off-by: Keerthy
Reviewed-by: Tom Rini
Reviewed-by: Simo
Enable palmas PMIC config options.
Signed-off-by: Keerthy
Reviewed-by: Tom Rini
---
configs/dra7xx_evm_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
index c74dc18..4af1b03 100644
--- a/configs/dra7xx_evm_defconfig
++
memory_map_size as IN parameter specifies the size of the provided buffer.
If the buffer is to small, memory_map_size is updated to indicate the
required size, and an error code is returned.
Signed-off-by: Stefan Brüns
---
lib/efi_loader/efi_memory.c | 8 +---
1 file changed, 5 insertions(+)
In 74c16acce30bb882ad5951829d8dafef8eea564c the return values where
changed, but the description was kept.
Signed-off-by: Stefan Brüns
---
lib/efi_loader/efi_memory.c | 14 +++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/lib/efi_loader/efi_memory.c b/lib/efi_loader/
The code assumes sorted mappings in descending address order. When
splitting a mapping, insert the new part next to the current mapping.
Signed-off-by: Stefan Brüns
---
lib/efi_loader/efi_memory.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/lib/efi_loader/efi_memory.c b
Linux 4.8 no longer boots, as it runs out of descriptor space. Readding
the mapping allows reuse, and the next AllocatePool will likely not add
a new mapping.
Also fix some small issues found while debugging.
Stefan Brüns (6):
efi_loader: Update description of internal efi_mem_carve_out
efi_l
Enable palmas PMIC config options.
Signed-off-by: Keerthy
Reviewed-by: Tom Rini
---
configs/am57xx_evm_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
index 27ea472..6c60d9b 100644
--- a/configs/am57xx_evm_defconfig
++
allocate_pool has to return a buffer which is 8-byte aligned. Shift the
region returned by allocate_pages by 8 byte and store the size in the
headroom. The 8 byte overhead is neglegible, but provides the required
size when freeing the allocation later.
Signed-off-by: Stefan Brüns
---
lib/efi_loa
Currently each allocation creates a new mapping. Readding the mapping
as free memory (EFI_CONVENTIONAL_MEMORY) potentially allows to hand out
an existing mapping, thus limiting the number of mapping descriptors in
the memory map.
Mitigates a problem with current (4.8rc7) linux kernels when doing a
On Friday 30 September 2016 05:12 AM, Simon Glass wrote:
Hi Keethy,
On 29 September 2016 at 00:11, Keerthy wrote:
On Thursday 29 September 2016 11:32 AM, Keerthy wrote:
On Wednesday 28 September 2016 11:21 PM, Simon Glass wrote:
Hi Keerthy,
On 27 September 2016 at 22:27, Keerthy wr
This converts the following to Kconfig:
CONFIG_CONSOLE_EXTRA_INFO
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
configs/MIP405T_defconfig| 1 +
configs/MIP405_defconfig | 1 +
configs/MiniFAP_defconfig| 1
This is not used in U-Boot.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
drivers/video/cfb_console.c | 33 +-
drivers/video/ct69000.c | 79
include/video_fb.h | 4 ---
Since all boards enable this, we may as well drop the option.
This is a separate patch from the previous one, so it can be skipped if
someone identifies a need.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
README | 1 -
dr
This converts the following to Kconfig:
CONFIG_SYS_STDIO_DEREGISTER
This option should never be enabled in SPL, so use
CONFIG_IS_ENABLED(SYS_STDIO_DEREGISTER) when checking the option.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2:
- Make CONFIG_SYS_STDIO_DEREGISTER the de
This converts the following to Kconfig:
CONFIG_USB_KEYBOARD
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2:
- Add new patch to convert CONFIG_USB_KEYBOARD to Kconfig
configs/Cyrus_P5020_defconfig | 1 +
configs/Cyrus_P5040_defconfig
This converts the following to Kconfig:
CONFIG_LCD
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
configs/TQM823L_LCD_defconfig | 3 ++-
configs/TTTech_defconfig | 3 ++-
configs/at91sam9261ek_dataflash_cs0_
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_INFO_QUIET
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2:
- Make CONFIG_SYS_CONSOLE_INFO_QUIET the default if !CONFIG_MUX
README | 3 ---
common/Kconfig
This is not used in U-Boot. Drop it.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
include/configs/edminiv2.h | 1 -
include/configs/km/km_arm.h| 1 -
include/configs/mv-common.h| 1 -
include/configs/mvebu_db-88f3720.h |
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_ENV_OVERWRITE
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
README | 3 ---
common/Kconfig | 9 +
configs/socfpga_arria5
This converts the following to Kconfig:
CONFIG_CONSOLE_SCROLL_LINES
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
README | 6 --
configs/bayleybay_defconfig | 1
This converts the following to Kconfig:
CONFIG_VIDEO_SW_CURSOR
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
drivers/video/Kconfig | 10 ++
drivers/video/cfb_console.c | 6 --
include/configs/MIP405.h |
This converts the following to Kconfig:
CONFIG_VGA_AS_SINGLE_DEVICE
Once we migrate to driver model for video, we should be able to drop this
option.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2: None
configs/Chuwi_V7_CW0825_defconfig | 1 +
confi
This should be defined in a header file so that arguments are checked.
Move it to video.h.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
board/liebherr/lwmon5/lwmon5.c | 1 +
board/mosaixtech/icon/icon.c | 1 +
board/mpl/common/common_util.c
This is not used in U-Boot.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
README | 5 -
drivers/video/Makefile | 1 -
drivers/video/cfb_console.c | 9 --
drivers/video/sed13806.c | 286 --
This is not used anywhere in U-Boot.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
drivers/video/Makefile| 1 -
drivers/video/imx25lcdc.c | 121 --
2 files changed, 122 deletions(-)
delete mode 1
This is not used in U-Boot.
Signed-off-by: Simon Glass
Acked-by: Minkyu Kang
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
drivers/video/Makefile | 1 -
drivers/video/cfb_console.c | 2 +-
drivers/video/s3c-fb.c | 172
This is not used in U-Boot anymore.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
README | 6 -
drivers/video/Makefile | 1 -
drivers/video/cfb_console.c | 13 -
drivers/video/smiLynxEM.c| 835 ---
This converts the following to Kconfig:
CONFIG_SYS_CONSOLE_BG_COL
CONFIG_SYS_CONSOLE_FG_COL
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
README | 5 ---
configs/pxm2_defconfig | 2 +
configs/rut_defconfig
This converts the following to Kconfig:
CONFIG_VIDEO
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
README | 5 -
configs/MIP405T_defconfig | 1 +
configs/MIP405
This converts the following to Kconfig:
CONFIG_CFB_CONSOLE
Signed-off-by: Simon Glass
---
Changes in v3:
- Change CONFIG_CFB_CONSOLE to default y if CONFIG_VIDEO
Changes in v2: None
README| 39 -
configs/eb_cpu5282_defconfig
This converts the following to Kconfig:
CONFIG_VIDEO_CT69000
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
README | 23 ---
configs/MIP405T_defconfig| 1 +
configs/MIP405_defconfig | 1 +
con
This converts the following to Kconfig:
CONFIG_CFB_CONSOLE_ANSI
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
README | 4
configs/T1042D4RDB_NAND_defconfig | 1 +
configs/T1042D4RDB_SDC
This is not really a config. Rename it to avoid confusion.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
include/configs/advantech_dms-ba16.h | 4 ++--
include/configs/aristainetos-common.h | 2 +-
include/configs/aristainetos.h| 2 +-
i
Move these option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2:
- Change CONFIG_PRE_CON_BUF_SZ default to 4096
- Change CONFIG_PRE_CON_BUF_SZ to 'int' type
- Drop the depend clause on the CONFIG_PRE_CON_BUF_SZ default
- Move CONFIG_PRE_CO
This is not really a config. Rename it to avoid confusion.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
include/configs/MPC8349ITX.h | 6 +++---
scripts/config_whitelist.txt | 1 -
2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/i
Move these option to Kconfig and tidy up existing uses.
The Power PC boards don't have a suitable common element: the common header
files don't appear to line up with the Kconfig files as far as I can tell.
This results in a lot of defconfig changes.
Signed-off-by: Simon Glass
---
Changes in v3
These two files have patch merge markers in them, within comments or
strings. Remove then, so that a search for merge markers does not show up
matches in these files.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v3: None
Changes in v2: None
drivers/net/ax88180.c |
This series moves a number of console-related CONFIG options to Kconfig.
Those that are not currently used are removed.
A few unused video drivers are also removed and there are a few minor
adjustments to improve the code. But mostly this follows the output of
the moveconfig tool.
It is build-tes
On 28.9.2016 12:13, Joe Hershberger wrote:
> On Wed, Sep 28, 2016 at 2:10 PM, Marek Vasut wrote:
>> On 09/28/2016 09:04 PM, Joe Hershberger wrote:
>>> On Wed, Sep 28, 2016 at 2:01 PM, Marek Vasut wrote:
On 09/28/2016 08:55 PM, Joe Hershberger wrote:
> On Tue, Sep 27, 2016 at 7:59 AM, Mar
On 09/28/2016 12:17 PM, Simon Glass wrote:
> +Masahiro, who may know
Masahiro,
Need some advise on this. How do we deal with duplicated config?
York
>
> On 28 September 2016 at 12:57, york sun wrote:
>> On 09/27/2016 10:55 AM, Simon Glass wrote:
>>> Hi York,
>>>
>>> On 27 September 2016 at 11:
from README file:
There are two classes of configuration variables:
* Configuration _OPTIONS_:
These are selectable by the user and have names beginning with
"CONFIG_".
* Configuration _SETTINGS_:
These depend on the hardware etc. and should not be meddled with if
you do
Hi Peng,
On Mon, Jun 20, 2016 at 7:15 AM, Peng Fan wrote:
> Hi Simon,
>
> On Fri, Jun 17, 2016 at 04:59:49PM -0600, Simon Glass wrote:
>>Hi Peng,
>>
>>On 17 June 2016 at 00:19, Peng Fan wrote:
>>> Support driver model for ehci mx6 driver.
>>> Consolidate code to be shared between DM and non-DM,
On Thu, Aug 4, 2016 at 11:52 AM, Belisko Marek wrote:
> Hi,
>
> I'm trying to figure out how it is possible easily update u-boot in
> nand on custom imx7 board. I can start u-boot using imx_usb tool. I
> came from ti am33xx world where I simply get u-boot.img from tftp
> server and store it to beg
Booting Linux kernel v4.7+ does not work since commit 974f221c
"x86/boot: Move compressed kernel to the end of the decompression buffer".
This patch adds the latest version of the setup_header struct, adding
"init_size" which is needed since this commit referenced above. With this
patch, booting L
Hi Tom,
Please pull the following patch from u-boot-nds32 into your tree.
Thanks!
The following changes since commit 06572f0301c18e63b887efc91803bb9467e55dbe:
Merge git://www.denx.de/git/u-boot-ppc4xx (2016-09-27 12:48:18 -0400)
are available in the git repository at:
git://git.denx.de
Hi Alex,
On Thu, Sep 29, 2016 at 4:06 PM, Alexander Graf wrote:
> On 09/29/2016 09:28 AM, Bin Meng wrote:
>>
>> Hi Alex,
>>
>> On Thu, Sep 29, 2016 at 3:13 PM, Alexander Graf wrote:
>>>
>>> On 09/29/2016 07:37 AM, Bin Meng wrote:
Hi Alex,
On Thu, Sep 29, 2016 at 1:08 PM, Alex
On 09/29/2016 09:28 AM, Bin Meng wrote:
Hi Alex,
On Thu, Sep 29, 2016 at 3:13 PM, Alexander Graf wrote:
On 09/29/2016 07:37 AM, Bin Meng wrote:
Hi Alex,
On Thu, Sep 29, 2016 at 1:08 PM, Alexander Graf wrote:
Am 29.09.2016 um 05:37 schrieb Bin Meng :
Hi Simon,
On Wed, Sep 28, 2016 at 10:
From: rick
Enable pie option for relocation.
Signed-off-by: rick
Cc: Andes
---
arch/nds32/config.mk |2 +-
arch/nds32/cpu/n1213/ag101/lowlevel_init.S | 13 +--
arch/nds32/cpu/n1213/start.S | 120 +++-
arch/nds32/cpu/n1213/u-bo
Hi Simon,
> Hi,
>
> On 27 September 2016 at 07:37, Lukasz Majewski
> wrote:
> > Hi Simon,
> >
> >> Hi Lukasz,
> >>
> >> On 16 September 2016 at 22:57, Lukasz Majewski
> >> wrote:
> >> > This script looks for env_common.o object file and extracts from
> >> > it default u-boot environment, which
1 - 100 of 104 matches
Mail list logo