Add CONFIG_USB_STORAGE to the defconfig file.
Signed-off-by: Uri Mashiach
---
configs/cl-som-am57x_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/cl-som-am57x_defconfig b/configs/cl-som-am57x_defconfig
index 916b836..1831f45 100644
--- a/configs/cl-som-am57x_defconfig
+++
Add CONFIG_CMD_USB to the defconfig file.
Signed-off-by: Uri Mashiach
---
configs/cl-som-am57x_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/cl-som-am57x_defconfig b/configs/cl-som-am57x_defconfig
index 1831f45..83d7bd0 100644
--- a/configs/cl-som-am57x_defconfig
+++ b/co
USB bus scan attempt:
--cut--
=> usb start
starting USB...
USB0: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... data abort
pc : [] lr : []
reloc pc : [<8081b40e>]lr : [<80
Invoke enable_usb_clocks during board_usb_init and disable_usb_clocks
during board_usb_exit to enable and disable clocks respectively.
Modifications:
* Enable USB clocks in the OMAP version of the function
board_usb_init.
* Disable USB clocks in the OMAP version of the function
board_usb_clean
A weak version of the function board_usb_init is implemented in:
common/usb.c
drivers/usb/host/xhci-omap.c
To fix the double implementations:
* Convert the board_usb_init function in drivers/usb/host/xhci-omap.c
normal (not weak).
* The function board_usb_init in drivers/usb/host/xhci-omap.c cal
The following XHCI registers base address are set to OMAP5 values:
OMAP_XHCI_BASE, OMAP_OCP1_SCP_BASE, OMAP_OTG_WRAPPER_BASE
Captured crash for "usb start" command:
--cut--
=> usb start
starting USB...
USB0: data abort
pc : []
On 02/02/2017 01:41 PM, Jaehoon Chung wrote:
> If there are alias nodes as "mmc", use the devnum as alias index
> number.
> This patch is for fixing a problem of Exynos4 series.
> Problem is the below thing.
>
> Current legacy mode:
> EXYNOS DWMMC: 0, SAMSUNG SDHCI: 1
>
> After using DM:
> SAMSUN
On 01/25/2017 06:00 PM, Fiach Antaw wrote:
> MMC devices accessed exclusively via the driver model were not
> being initialized before being exposed as block devices, causing
> issues in scenarios where the MMC device is first accessed via the
> uclass block interface.
>
> Signed-off-by: Fiach Ant
Hi,
On 02/02/2017 05:04 PM, Jaehoon Chung wrote:
> To use driver-model adds the pmic node for max8997.
> This is used as kernel device-tree in Linux.
>
> Signed-off-by: Jaehoon Chung
> Reviewed-by: Simon Glass
Minkyu doesn't review this patch. but i will pick this patch on my repository.
Appl
Hi,
On 02/02/2017 05:04 PM, Jaehoon Chung wrote:
> Add the max8997 controller for Driver model.
> Exynos4210 is using max8997 pmic controller.
> (pmic_max8997.c should be deprecated.)
>
> Signed-off-by: Jaehoon Chung
> Reviewed-by: Simon Glass
Applied on pmic branch of u-boot-mmc. Thanks!
Bes
On 02/02/2017 08:58 PM, Tom Rini wrote:
> On Thu, Feb 02, 2017 at 07:33:36PM +0900, Jaehoon Chung wrote:
>
>> ftsdc021_sdhci.c is dead file.
>> There is no reason to maintain this host controller.
>> Removes the entire ftsdc021_sdhci.c.
>>
>> Signed-off-by: Jaehoon Chung
>
> Reviewed-by: Tom Rin
Hi
On 02/07/2017 02:31 AM, aford...@gmail.com wrote:
> From: Adam Ford
>
> On the OMAP36xx/37xx the CONTROL_WKUP_CTRL register has
> a field (bit 6) named GPIO_IO_PWRDNZ. If 0, the IO buffers which
> are related to GPIO_126, 127 and 129 are disabled. Some boards may
> need this for MMC. After t
All,
The patch Alex submitted to enable distro boot on ls2085ardb sets
up a default bootcmd that looks like this:
bootcmd=run mcinitcmd && fsl_mc lazyapply dpl 0x58070 &&
cp.b $kernel_start $kernel_load $kernel_size &&
bootm $kernel_load || run distro_bootcmd
> -Original Message-
> From: york sun
> Sent: Thursday, February 09, 2017 4:43 AM
> To: Peter Newton ; Stuart Yoder
> ; ag...@suse.de; Prabhakar Kushwaha
>
> Cc: u-boot@lists.denx.de
> Subject: Re: distro boot on ls2085ardb
>
> On 02/08/2017 03:08 PM, Peter Newton wrote:
> >> From: york
Hi Simon,
> -Original Message-
> From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon Glass
> Sent: 2017年2月8日 13:09
> To: Wenyou Yang - A41535
> Cc: U-Boot Mailing List ; Andreas Bießmann
> ; Scott Wood ; Wenyou
> Yang - A41535
> Subject: Re: [PATCH] nand: atmel: add drvice
On 02/08/2017 02:55 PM, Stuart Yoder wrote:
> All,
>
> The patch Alex submitted to enable distro boot on ls2085ardb sets
> up a default bootcmd that looks like this:
>
> bootcmd=run mcinitcmd && fsl_mc lazyapply dpl 0x58070 &&
> cp.b $kernel_start $kernel_load $kernel_size &
On Wednesday 08 February 2017 10:51 PM, Andrew F. Davis wrote:
> Add a Kconfig option that enables Legacy image support, this allows
> boards to explicitly disable this, for instance when needed for
> security reasons.
>
> Signed-off-by: Andrew F. Davis
> ---
> Kconfig | 8
>
On Wednesday 08 February 2017 10:51 PM, Andrew F. Davis wrote:
> CONFIG_SPL_ABORT_ON_RAW_IMAGE causes SPL to abort and move on when it
> encounters RAW images, express this same functionality as a positive
> option enabling support for RAW images: CONFIG_SPL_RAW_IMAGE_SUPPORT
>
> Signed-off-by:
On Thursday 09 February 2017 02:02 AM, Andrew F. Davis wrote:
> The non-HS defconfig has been modified without equivalent changes being
> applied to the HS defconfig. Sync these here.
>
> Signed-off-by: Andrew F. Davis
Reviewed-by: Lokesh Vutla
I am sure we might encounter this problem again
On Wednesday 08 February 2017 10:03 PM, Ladislav Michl wrote:
> On Wed, Feb 08, 2017 at 06:03:33PM +0530, Lokesh Vutla wrote:
>> To make SPL_OF_CONTROL work on OAP2+ SoCs, _image_binary_end must be
> OMAP2+ ---> ^
>
> Just a nitpick, but helps grepping for changes in git
On Wednesday 08 February 2017 07:19 PM, Tom Rini wrote:
> On Wed, Feb 08, 2017 at 06:03:34PM +0530, Lokesh Vutla wrote:
>
>> Add a generic dts file for spl that is used by all
>> AM57xx based platforms.
>>
>> Signed-off-by: Lokesh Vutla
>> ---
>> arch/arm/dts/Makefile | 1 +
>>
Add u-boot specific dtsi so that this will be
included automatically while building dts.
Signed-off-by: Lokesh Vutla
---
arch/arm/dts/omap5-u-boot.dtsi | 46 ++
1 file changed, 46 insertions(+)
create mode 100644 arch/arm/dts/omap5-u-boot.dtsi
diff --git
Enable SPL_DM on all DRA7 based platforms.
Signed-off-by: Lokesh Vutla
---
configs/dra7xx_evm_defconfig | 5 -
configs/dra7xx_hs_evm_defconfig | 5 -
include/configs/dra7xx_evm.h | 5 -
include/configs/ti_omap5_common.h | 8 +---
4 files changed, 9 insertions(+), 14 d
To make SPL_OF_CONTROL work on OMAP2+ SoCs, _image_binary_end must be
defined in the linker script along with CONFIG_SPL_SEPARATE_BSS.
Reviewed-by: Tom Rini
Signed-off-by: Lokesh Vutla
---
arch/arm/mach-omap2/u-boot-spl.lds | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-oma
Enable SPL_DM on all AM57xx based platforms.
Signed-off-by: Lokesh Vutla
---
configs/am57xx_evm_defconfig| 7 +--
configs/am57xx_hs_evm_defconfig | 5 -
include/configs/am57xx_evm.h| 5 -
3 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/configs/am57xx_evm_defcon
- Enable SPL_DM on all DRA7 and AM57xx based platforms.
- SPL uses a generic dts on all platforms with same defconfig.
- After this series SPL size is increased by ~8KB.
Verified MMC, eMMC boot on DRA74-evm, DRA72-evm.
MMC boot on AM57xx-evm.
Changes since v1:
- Instead of creating a new dts file
The size field in GP header that is expected by ROM is size of the
image + size of the header. But omapimage generates a gp header
only with size of the image as size field. Fix it
Reviewed-by: Tom Rini
Signed-off-by: Lokesh Vutla
---
tools/gpimage.c | 2 +-
tools/omapimage.c | 2 +-
2 files
Hi Stefan,
On Thu, Feb 9, 2017 at 12:44 AM, Stefan Roese wrote:
> Hi Bin,
>
>
> On 04.02.2017 06:57, Bin Meng wrote:
>>
>> On Mon, Jan 23, 2017 at 10:55 PM, Stefan Roese wrote:
>>>
>>> Without configuring these registers in the SPI controller, the Linux
>>> MTD device driver is not able to corre
On Wed, Feb 8, 2017 at 5:23 PM, Marek Vasut wrote:
> On 02/08/2017 11:51 PM, Dinh Nguyen wrote:
>>
>>
>> On 02/08/2017 03:04 PM, Marek Vasut wrote:
>>> On 02/08/2017 06:59 PM, Dinh Nguyen wrote:
On 02/07/2017 07:32 PM, Marek Vasut wrote:
> On 02/08/2017 02:21 AM, Marek Vasut wro
On Wed, Feb 08, 2017 at 10:45:20AM -0700, Simon Glass wrote:
> Hi Tom,
>
> This includes a few more DM and patman/buildman patches and some
> cros_ec additions. The change to of_offset is best applied now that
> rc1 is out, since I should have picked up all the usages.
>
>
> The following chang
On Tue, Jan 31, 2017 at 03:37:03PM -0600, Grygorii Strashko wrote:
> Now when CONFIG_CMD_IMLS_NAND is enabled the u-boot build will fail,
> because nand_read_skip_bad() function has been changed to accept more
> parameters, hence fix it.
>
> CC cmd/bootm.o
> cmd/bootm.c: In function 'nand_i
On Mon, Feb 06, 2017 at 07:11:41AM -0500, Robert P. J. Day wrote:
> Signed-off-by: Robert P. J. Day
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx
On Sat, Feb 04, 2017 at 12:30:06PM +0900, Masahiro Yamada wrote:
> There are two typos in the comment "invalide i-cache is enabled".
> We can fix it by
> invalide -> invalidate
> is -> if
>
> Or, if we want to match the comment to the code, we can say
> "skip invalidating i-cache if dis
On Fri, Feb 03, 2017 at 12:31:46PM +, Phil Edworthy wrote:
> CONFIG_SPL_STACK_SIZE is not a config option, so rename it.
>
> Signed-off-by: Phil Edworthy
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
On Mon, Feb 06, 2017 at 12:30:19PM +0100, Lars Poeschel wrote:
> Albeit it's a typo, neither CONGIG_CMD_STORAGE nor CONFIG_CMD_STORAGE
> are used anywhere, so remove the define from the board configs.
>
> Signed-off-by: Lars Poeschel
> Reviewed-by: Tom Rini
Applied to u-boot/master, thanks!
-
On Sun, Feb 05, 2017 at 10:42:56AM +0900, Masahiro Yamada wrote:
> CONFIG_CMD_ZIP is not defined by any board. I am moving
> CONFIG_CMD_UNZIP to defconfig files except UniPhier SoC family.
>
> I am the maintainer of UniPhier platform, so I know "select CMD_UNZIP"
> is better for this platform.
>
On Fri, Feb 03, 2017 at 05:04:08PM +0530, Keerthy wrote:
> The array indices used currently are dispalaced by 1 for
> SMPS6 through SMPS10 in the respective places of voltage and ctrl
> arrays hence fix the same as to assign the right voltage and ctrl
> registers.
>
> Signed-off-by: Keerthy
App
On Wed, Feb 01, 2017 at 02:51:47PM +0100, Jean-Jacques Hiblot wrote:
> The default values for the configuration defines CONFIG_ENV_SPI_xxx are
> arbitrary values. It makes more sense to set them to the values used by
> the sf command.
>
> Signed-off-by: Jean-Jacques Hiblot
> Reviewed-by: Tom Rin
On Thu, Feb 02, 2017 at 04:04:11PM +0900, Masahiro Yamada wrote:
> Both CONFIG_PWM_TEGRA and CONFIG_PWM_EXYNOS depend on CONFIG_DM_PWM,
> i.e. they are already guarded by Kconfig correctly. Remove unneeded
> ifdef CONFIG_DM_PWM ... endif.
>
> While we are here, let's tidy up alignment and sort t
On Tue, Jan 31, 2017 at 02:15:53PM -0600, Dan Murphy wrote:
> Pick commit 66b47b4a9dad0 checkpatch: look for common misspellings
> from the Linux kernel for spelling check from Kees Cook
>
> In addition pulled in additional changes
> commit ebfd7d6237531 checkpatch: add optional --codespell dicti
On Wed, Feb 01, 2017 at 02:46:00PM +0100, Albert ARIBAUD (3ADEV) wrote:
> The sequence erroneously launched the DDR controller
> initialization before the pad muxing was done, causing
> DRAM size computation to hang.
>
> Configuring the pads first then launching DDR controller
> initialization pr
On Wed, Feb 01, 2017 at 09:20:49AM +0530, Lokesh Vutla wrote:
> cpsw driver tries to get macid for am43xx SoCs using the compatible
> ti,am4372. But not all variants of am43x uses this complatible like
> epos evm uses ti,am438x. So use a generic compatible ti,am43 to get
> macid for all am43 based
On Tue, Jan 31, 2017 at 12:17:05PM +0100, Emmanuel Vadot wrote:
> Now that we have a Kconfig for the API, convert the two boards that
> are using this to Kconfig and remove CONFIG_API from the whitelist.
>
> Signed-off-by: Emmanuel Vadot
> Reviewed-by: Tom Rini
> Reviewed-by: Simon Glass
Appl
On Tue, Jan 31, 2017 at 08:11:33PM +0900, Masahiro Yamada wrote:
> Use the kbuild style log.
>
> Prior to this commit:
>
> ./scripts/check-config.sh u-boot.cfg \
> ./scripts/config_whitelist.txt . 1>&2
>
> With this commit:
>
> CFGCHK u-boot.cfg
>
> Signed-off-by: Masahiro Yamada
>
On Tue, Jan 31, 2017 at 09:32:57AM +0530, Lokesh Vutla wrote:
> As reported in [1], rename the k2* dts files to keystone-* files
> this will force consistency throughout.
>
> Script for the same (and hand modified for Makefile and config
> files):
> for i in arch/arm/dts/k2*
> do
> b=`basen
On Tue, Jan 31, 2017 at 12:17:04PM +0100, Emmanuel Vadot wrote:
> Add kconfig file to enable API support
>
> Signed-off-by: Emmanuel Vadot
> Reviewed-by: Tom Rini
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
_
On Mon, Jan 30, 2017 at 11:35:04AM -0800, max...@google.com wrote:
> Fix H-PLL and M-PLL rate calculation in ast2500 clock driver.
> Without this fix, valid setting can lead to division by zero
> when requesting the rate of H-PLL or M-PLL clocks.
>
> Signed-off-by: Maxim Sloyko
> Reviewed-by: Si
On Mon, Jan 30, 2017 at 03:46:07PM +0300, Andy Shevchenko wrote:
> From: Vincent Tinelli
>
> On some cases the first 440 bytes of MBR are used to keep an additional
> information for ROM boot loader. 'gpt write' command doesn't preserve
> that area and makes boot code gone.
>
> Preserve boot co
On Mon, Jan 30, 2017 at 11:12:06AM +0900, Masahiro Yamada wrote:
> Import scripts/basic/bin2c.c of Linux.
>
> In Linux Kernel, this file was moved to scripts/basic directory by
> commit 8370edea81e3 ("bin2c: move bin2c in scripts/basic").
>
> In U-Boot, we do not need to follow that commit. Jus
On Mon, Jan 30, 2017 at 11:12:08AM +0900, Masahiro Yamada wrote:
> The previous commit ("add a new command to show .config contents")
> improves the basic infrastructure of "embed a compressed file into
> the U-Boot image, and print it by a command". The same pattern for
> the "license" command.
On Mon, Jan 30, 2017 at 11:12:07AM +0900, Masahiro Yamada wrote:
> This feature is inspired by /proc/config.gz of Linux. In Linux,
> if CONFIG_IKCONFIG is enabled, the ".config" file contents are
> embedded in the kernel image. If CONFIG_IKCONFIG_PROC is also
> enabled, the ".config" contents ar
On Fri, Jan 27, 2017 at 04:15:30PM +0900, Masahiro Yamada wrote:
> Save one instruction.
>
> Signed-off-by: Masahiro Yamada
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boo
On Fri, Jan 27, 2017 at 04:15:29PM +0900, Masahiro Yamada wrote:
> AArch64 has a zero register (xzr). Use it instead of x2.
>
> Signed-off-by: Masahiro Yamada
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
_
On Fri, 2017-02-03 at 10:36 -0800, Dalon Westergreen wrote:
> From: Dalon Westergreen
>
> This adds support for the spl to seach for and boot from an arbitrary
> partition type rather then a specific partition number. When
> USE_PARTITION_TYPE is enabled, splwill search for the partition type b
On 02/08/2017 11:51 PM, Dinh Nguyen wrote:
>
>
> On 02/08/2017 03:04 PM, Marek Vasut wrote:
>> On 02/08/2017 06:59 PM, Dinh Nguyen wrote:
>>>
>>>
>>> On 02/07/2017 07:32 PM, Marek Vasut wrote:
On 02/08/2017 02:21 AM, Marek Vasut wrote:
> On 01/31/2017 07:33 PM, Dinh Nguyen wrote:
>>
Hi,
SoCFPGA PR for 2017.03 , I checked with Dinh and it should be OK.
The following changes since commit c83a824e62277162ad35f52879b2316902c0eff5:
Merge git://git.denx.de/u-boot-fsl-qoriq (2017-02-03 20:33:42 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-socfpga.g
On 02/08/2017 03:08 PM, Peter Newton wrote:
>> From: york sun
>>
>> It was for backward compatibility. Even I have pointed out numerous times
>> (internally) that cp.b should not be used for this case, and
>> even pointed out how to make a FIT image with load address, the board
>> maintainer(s)
On 02/08/2017 02:12 PM, Simon Glass wrote:
> Hi York,
>
> On 8 February 2017 at 14:58, york sun wrote:
>> Simon,
>>
>> I stumped on this issue when I was rewriting the code to reserve secure
>> memory. I didn't realize gd->ram_size was used in the driver. I made the
>> top of memory secure so EL2
On 02/08/2017 03:04 PM, Marek Vasut wrote:
> On 02/08/2017 06:59 PM, Dinh Nguyen wrote:
>>
>>
>> On 02/07/2017 07:32 PM, Marek Vasut wrote:
>>> On 02/08/2017 02:21 AM, Marek Vasut wrote:
On 01/31/2017 07:33 PM, Dinh Nguyen wrote:
> The mpuclk register in the Altera group of the clock man
On Tue, Feb 7, 2017 at 11:52 AM, Tom Rini wrote:
> On Mon, Feb 06, 2017 at 07:17:35PM -0800, Alexandru Gagniuc wrote:
>
>> From: "Andrew F. Davis"
>>
>> Signed-off-by: Andrew F. Davis
> [snip]
>> 756 files changed, 860 insertions(+), 579 deletions(-)
>
> So this shows we have some places where
Simon,
I stumped on this issue when I was rewriting the code to reserve secure
memory. I didn't realize gd->ram_size was used in the driver. I made the
top of memory secure so EL2 code wouldn't be able to access. All of the
sudden my PCI device failed. By reducing the gd->ram_size, PCI works ag
Hi York,
On 8 February 2017 at 14:58, york sun wrote:
> Simon,
>
> I stumped on this issue when I was rewriting the code to reserve secure
> memory. I didn't realize gd->ram_size was used in the driver. I made the
> top of memory secure so EL2 code wouldn't be able to access. All of the
> sudden
On Tue, Jan 31, 2017 at 03:37:04PM -0600, Grygorii Strashko wrote:
> From: Mugunthan V N
>
> nand_info is used all over the file so abstract it with
> get_nand_dev_by_index() which will help for DM conversion.
>
> Signed-off-by: Mugunthan V N
> Signed-off-by: Grygorii Strashko
> Reviewed-by:
On 02/08/2017 06:59 PM, Dinh Nguyen wrote:
>
>
> On 02/07/2017 07:32 PM, Marek Vasut wrote:
>> On 02/08/2017 02:21 AM, Marek Vasut wrote:
>>> On 01/31/2017 07:33 PM, Dinh Nguyen wrote:
The mpuclk register in the Altera group of the clock manager
divides the mpu_clk that is generated fro
On Wed, Feb 08, 2017 at 02:46:22PM -0600, Andrew F. Davis wrote:
> On 02/08/2017 02:40 PM, Tom Rini wrote:
> > On Wed, Feb 08, 2017 at 12:42:33PM -0600, Andrew F. Davis wrote:
> >> On 02/08/2017 07:07 AM, Lokesh Vutla wrote:
> >>>
> >>>
> >>> On Wednesday 08 February 2017 06:26 PM, Tom Rini wrote:
On 02/08/2017 02:40 PM, Tom Rini wrote:
> On Wed, Feb 08, 2017 at 12:42:33PM -0600, Andrew F. Davis wrote:
>> On 02/08/2017 07:07 AM, Lokesh Vutla wrote:
>>>
>>>
>>> On Wednesday 08 February 2017 06:26 PM, Tom Rini wrote:
On Wed, Feb 08, 2017 at 06:03:31PM +0530, Lokesh Vutla wrote:
>
On Wed, Feb 08, 2017 at 12:42:33PM -0600, Andrew F. Davis wrote:
> On 02/08/2017 07:07 AM, Lokesh Vutla wrote:
> >
> >
> > On Wednesday 08 February 2017 06:26 PM, Tom Rini wrote:
> >> On Wed, Feb 08, 2017 at 06:03:31PM +0530, Lokesh Vutla wrote:
> >>
> >>> - Enable SPL_DM on all DRA7 and AM57xx b
The non-HS defconfig has been modified without equivalent changes being
applied to the HS defconfig. Sync these here.
Signed-off-by: Andrew F. Davis
---
configs/am43xx_hs_evm_defconfig | 12 ++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/configs/am43xx_hs_evm_defconf
On 02/07/2017 09:08 PM, Priyanka Jain wrote:
>
>
> We have verified VID support on LS2080AQDS, LS2080ARDB, LS2088AQDS,
> LS2080ARDB (all SoCs in upstream for which LSCH3 flag is applicable)
>
>
Great! Thanks.
York
___
U-Boot mailing list
U-Boot@lis
On Wed, Feb 8, 2017 at 12:26 AM, Sekhar Nori wrote:
> On Wednesday 08 February 2017 12:36 AM, Yung-Ching LIN wrote:
>> On Tue, Feb 7, 2017 at 12:50 AM, Sekhar Nori wrote:
>>> On Monday 06 February 2017 11:06 PM, Ken.Lin wrote:
>>>
>> The register setting would turn out to be 0x3D47 on our pro
On 02/08/2017 07:07 AM, Lokesh Vutla wrote:
>
>
> On Wednesday 08 February 2017 06:26 PM, Tom Rini wrote:
>> On Wed, Feb 08, 2017 at 06:03:31PM +0530, Lokesh Vutla wrote:
>>
>>> - Enable SPL_DM on all DRA7 and AM57xx based platforms.
>>> - SPL uses a generic dts on all platforms with same defconf
On 02/07/2017 07:32 PM, Marek Vasut wrote:
> On 02/08/2017 02:21 AM, Marek Vasut wrote:
>> On 01/31/2017 07:33 PM, Dinh Nguyen wrote:
>>> The mpuclk register in the Altera group of the clock manager
>>> divides the mpu_clk that is generated from the C0 output of the main
>>> pll.
>>>
>>> Without
FIT support in the net boot case is much like the RAM boot case in that
we load our image to "load_addr" and pass a dummy read function into
"spl_load_simple_fit()". As the load address is no longer hard-coded to
the final execution address, RAW image loading will rely on "load_addr"
pointing to th
Hi Tom,
This includes a few more DM and patman/buildman patches and some
cros_ec additions. The change to of_offset is best applied now that
rc1 is out, since I should have picked up all the usages.
The following changes since commit 446d4e048ee3b00f7907e15cd02aa404cc714c77:
x86: make LOAD_FR
On 8 February 2017 at 06:03, Simon Glass wrote:
> On 7 February 2017 at 00:11, Chris Packham wrote:
>> When gathering addresses for the Cc list patman would encounter a
>> UnicodeDecodeError due to non-ascii characters in the author name.
>> Address this by explicitly using utf-8 when building th
On 23 January 2017 at 05:38, Simon Glass wrote:
> As well as showing the number of boards, allow showing the actual list of
> boards that would be built, if -v is provided.
>
> Signed-off-by: Simon Glass
> ---
>
> tools/buildman/README | 2 +-
> tools/buildman/board.py | 10 +-
>
On 8 February 2017 at 06:04, Simon Glass wrote:
> On 20 January 2017 at 13:35, Moritz Fischer wrote:
>> Add support for version 3 of the ec protocol. It basically works by
>> stitching some additional header in front (special command code),
>> and having a result and packet_length stitched on for
On 7 February 2017 at 22:09, Simon Glass wrote:
> Hi Kever,
>
> On 4 February 2017 at 17:24, Kever Yang wrote:
>>
>> Hi Simon,
>>
>> Found 1 typo on the subject, 'suport' should be 'support',
>> do I need to send a new patch or you can correct it when you apply?
>
> I can correct it when I ap
On 8 February 2017 at 06:02, Simon Glass wrote:
> On 12 January 2017 at 10:47, Moritz Fischer wrote:
>>
>> Replace dm_i2c_write() / dm_i2c_read() with transaction using
>> struct i2c_msg[2] in order to allow for i2c controller to detect
>> write/read cycle to emit a repeated start condition.
>>
>
On 17 January 2017 at 16:52, Simon Glass wrote:
> At present devices use a simple integer offset to record the device tree
> node associated with the device. In preparation for supporting a live
> device tree, which uses a node pointer instead, refactor existing code to
> access this field through
On 17 January 2017 at 16:52, Simon Glass wrote:
> It is convenient to be able to deal with checkpatch warnings in the same
> way as build warnings. Tools such as emacs and kate can quickly locate
> the source file and line automatically.
>
> To achieve this, adjust the format to match the C compil
On 15 January 2017 at 21:09, Simon Glass wrote:
> If there is a '.' in a compatible string, then dtoc will produce a struct
> with a name containing a '.'. This won't work, so replace it with '_'.
>
> Also add a suitable test to the sandbox device tree to catch this.
>
> Signed-off-by: Simon Glass
On 9 January 2017 at 03:17, Ladislav Michl wrote:
> fdt_fixup_mtdparts currently does nothing when partitin info is
> runtime generated or compiled-in defaults are used.
>
> Signed-off-by: Ladislav Michl
> ---
> common/fdt_support.c | 5 -
> 1 file changed, 5 deletions(-)
Fixed commit messa
Disable support for loading non-FIT images for AM335x platforms using
the high-security (HS) device variant.
Signed-off-by: Andrew F. Davis
---
configs/am335x_hs_evm_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/am335x_hs_evm_defconfig b/configs/am335x_hs_evm_defconfig
On 02/07/2017 10:48 PM, Udit Agarwal wrote:
> For validating images from uboot (Such as Kernel Image), either keys
> from SoC fuses can be used or keys from a verified table of public keys
> can be used. The latter feature is called IE Key Extension Feature.
>
> On ls-ch3 platforms,IE table is vali
Disable support for loading non-FIT images for AM43xx platforms using
the high-security (HS) device variant.
Signed-off-by: Andrew F. Davis
---
configs/am43xx_hs_evm_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig
Add a Kconfig option that enables Legacy image support, this allows
boards to explicitly disable this, for instance when needed for
security reasons.
Signed-off-by: Andrew F. Davis
---
Kconfig | 8
common/spl/spl.c | 9 +++--
2 files changed, 15 insertions(+), 2 deletions(-
Disable support for loading non-FIT images for DRA7xx platforms using
the high-security (HS) device variant.
Signed-off-by: Andrew F. Davis
---
configs/dra7xx_hs_evm_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig
Disable support for loading non-FIT images for AM57xx platforms using
the high-security (HS) device variant.
Signed-off-by: Andrew F. Davis
---
configs/am57xx_hs_evm_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig
CONFIG_SPL_ABORT_ON_RAW_IMAGE causes SPL to abort and move on when it
encounters RAW images, express this same functionality as a positive
option enabling support for RAW images: CONFIG_SPL_RAW_IMAGE_SUPPORT
Signed-off-by: Andrew F. Davis
---
Kconfig | 7 +++
README
Hello all,
To address a needed feature brought up by Andreas[0], we need a way to
disable SPL from loading non-FIT images.
The function spl_parse_image_header is common to all SPL loading paths
(common/spl/spl_(nand|net|nor|etc..)) so we add the check here.
This version of the series is a bit di
Hi Bin,
On 04.02.2017 06:57, Bin Meng wrote:
On Mon, Jan 23, 2017 at 10:55 PM, Stefan Roese wrote:
Without configuring these registers in the SPI controller, the Linux
MTD device driver is not able to correctly read/write to the SPI
NOR chip at all. In fact, the chip is not detected at all.
S
On 02/08/2017 05:28 PM, Konstantin Porotchkin wrote:
> Hi, Marek,
>
> On 02/08/2017 06:04 PM, Marek Vasut wrote:
>> On 02/08/2017 04:45 PM, Konstantin Porotchkin wrote:
>>> Hi, Marek,
>>>
>>> On 02/08/2017 05:35 PM, Marek Vasut wrote:
On 02/08/2017 04:34 PM, kos...@marvell.com wrote:
> Fr
On 02/08/2017 08:05 AM, Lokesh Vutla wrote:
>
>
> On Wednesday 08 February 2017 04:29 AM, Andrew F. Davis wrote:
>> FIT support in the net boot case is much like the RAM boot case in that
>> we load our image to "load_addr" and pass a dummy read function into
>> "spl_load_simple_fit()". As the lo
On 02/08/2017 04:07 AM, Vignesh R wrote:
>
>
> On Wednesday 08 February 2017 04:29 AM, Andrew F. Davis wrote:
>> FIT support in the net boot case is much like the RAM boot case in that
>> we load our image to "load_addr" and pass a dummy read function into
>> "spl_load_simple_fit()". As the load
On Wed, Feb 08, 2017 at 06:03:33PM +0530, Lokesh Vutla wrote:
> To make SPL_OF_CONTROL work on OAP2+ SoCs, _image_binary_end must be
OMAP2+ ---> ^
Just a nitpick, but helps grepping for changes in git log.
Thank you,
ladis
> defined in the linker script along wit
Hi, Marek,
On 02/08/2017 06:04 PM, Marek Vasut wrote:
On 02/08/2017 04:45 PM, Konstantin Porotchkin wrote:
Hi, Marek,
On 02/08/2017 05:35 PM, Marek Vasut wrote:
On 02/08/2017 04:34 PM, kos...@marvell.com wrote:
From: Konstantin Porotchkin
The USB device should linked to VBUS regulator thro
On 02/08/2017 04:45 PM, Konstantin Porotchkin wrote:
> Hi, Marek,
>
> On 02/08/2017 05:35 PM, Marek Vasut wrote:
>> On 02/08/2017 04:34 PM, kos...@marvell.com wrote:
>> > From: Konstantin Porotchkin
>> >
>> > The USB device should linked to VBUS regulator through "vbus-supply"
>> > DTS property.
Hi, Marek,
On 02/08/2017 05:35 PM, Marek Vasut wrote:
On 02/08/2017 04:34 PM, kos...@marvell.com wrote:
> From: Konstantin Porotchkin
>
> The USB device should linked to VBUS regulator through "vbus-supply"
> DTS property.
> This patch adds handling for "vbus-supply" property inside the USB
> d
On 02/08/2017 04:34 PM, kos...@marvell.com wrote:
> From: Konstantin Porotchkin
>
> The USB device should linked to VBUS regulator through "vbus-supply"
> DTS property.
> This patch adds handling for "vbus-supply" property inside the USB
> device entry for turning on the VBUS regulator upon the h
1 - 100 of 152 matches
Mail list logo