Re: [U-Boot] [PATCH] armv8: ls1043a/ls1046aqds: fix the offsets of MTD partitions on Nor flash

On 03/16/2017 06:05 PM, Wenbin Song wrote: > Hi york, > > Do you mean it is not necessary to supply so much partitions for user, just > supplying two partitions, one is reserved for firmware(including RCW, U-boot, > Env, PPA, kernel.itb and so on), the other is the rest of flashes, if not, >

Re: [U-Boot] [RFC PATCH] driver: pci: Fix regions for local memory

On 03/16/2017 08:14 PM, Simon Glass wrote: > Hi York, > > On 16 March 2017 at 16:47, Simon Glass wrote: >> On 9 February 2017 at 11:35, York Sun wrote: >>> When adding local memory to PCI region, gd->ram_size is correct only >>> if the memory is in one

Re: [U-Boot] [PATCH 03/22] x86: baytrail: acpi: Add APIs for determining/clearing sleep state

On 16 March 2017 at 08:26, Bin Meng wrote: > This adds APIs for determining previous sleep state from ACPI I/O > registers, as well as clearing sleep state on BayTrail SoC. > > Signed-off-by: Bin Meng > --- > > arch/x86/cpu/baytrail/acpi.c |

Re: [U-Boot] [PATCH 01/22] dm: rtc: Add 16-bit read/write support

On 16 March 2017 at 08:26, Bin Meng wrote: > At present there are only 8-bit and 32-bit read/write routines in > the rtc uclass driver. This adds the 16-bit support. > > Signed-off-by: Bin Meng > --- > > drivers/rtc/rtc-uclass.c | 30

Re: [U-Boot] [PATCH 04/22] x86: Add post codes for OS resume

On 16 March 2017 at 08:26, Bin Meng wrote: > This adds OS_RESUME (0x40) and RESUME_FAILURE (0xed) post codes. > > Signed-off-by: Bin Meng > --- > > arch/x86/include/asm/post.h | 2 ++ > 1 file changed, 2 insertions(+) Reviewed-by: Simon Glass

Re: [U-Boot] [PATCH 02/22] x86: acpi: Add Kconfig option and header file for ACPI resume

Hi Bin, On 16 March 2017 at 08:26, Bin Meng wrote: > This introduces a Kconfig option for ACPI S3 resume, as well as a > header file to include anything related to ACPI S3 resume. > > Signed-off-by: Bin Meng > --- > > arch/x86/Kconfig | 12

Re: [U-Boot] [PATCH 00/22] x86: Add ACPI S3 resume support

Hi Bin, On 16 March 2017 at 08:26, Bin Meng wrote: > This adds ACPI S3 (suspend to ram) resume capability in U-Boot. > With S3 support within U-Boot, the board wakes up and resumes to > OS very quickly. > > This so far is enabled and tested on Intel MinnowMax board. Please >

Re: [U-Boot] [RFC PATCH] driver: pci: Fix regions for local memory

Hi York, On 16 March 2017 at 16:47, Simon Glass wrote: > On 9 February 2017 at 11:35, York Sun wrote: >> When adding local memory to PCI region, gd->ram_size is correct only >> if the memory is in one continuous block. In case memory is split >> into several

Re: [U-Boot] [PATCH] ARM: dts: skeleton: fix unit name warning from dtc

Hi Simon, > -Original Message- > From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon Glass > Sent: 2017年3月13日 21:24 > To: Masahiro Yamada > Cc: Wenyou Yang - A41535 ; U-Boot Mailing > List ;

Re: [U-Boot] [PATCH] armv8: ls1043a/ls1046aqds: fix the offsets of MTD partitions on Nor flash

Hi york, Do you mean it is not necessary to supply so much partitions for user, just supplying two partitions, one is reserved for firmware(including RCW, U-boot, Env, PPA, kernel.itb and so on), the other is the rest of flashes, if not, Could you give me more details? Best Regards Wenbin

Re: [U-Boot] [PATCH v2] ARM: dts: Makefile: use board id to decide which dts compile

Hi Simon, > -Original Message- > From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon Glass > Sent: 2017年3月13日 21:24 > To: Wenyou Yang - A41535 > Cc: U-Boot Mailing List ; Stephen Warren > ; Andreas

[U-Boot] Please pull u-boot-rockchip

Hi Tom, This is an updated version of the previous pull request, includes support for rk3188 from Heiko Stübner and and rk3328 from Kever Yang. Also included is SPL support for rk3399 and a fix for rk3288 to get it booting again (spl_early_init()). The following changes since commit

Re: [U-Boot] [PATCHv3 3/3] lib: move hash CONFIG options to Kconfig

On Thu, Mar 16, 2017 at 04:06:40PM -0600, Simon Glass wrote: > Hi Tom, > > On 9 March 2017 at 11:44, Tom Rini wrote: > > On Tue, Mar 07, 2017 at 11:20:08AM -0500, Tom Rini wrote: > >> Commit 94e3c8c4fd7b ("crypto/fsl - Add progressive hashing support > >> using hardware

Re: [U-Boot] [PATCH v3] Add single register pin controller driver

Hi, On 11 March 2017 at 04:52, James wrote: > Hi Felix, > > Not 'hijacking' a patch, just following Linux Developer's Certificate of > Origin 1.1 guidelines. > > As you know, I contacted you directly with this patch suggestion prior to > posting to the mailing list (keeping

Re: [U-Boot] [RFC PATCH] driver: pci: Fix regions for local memory

On 9 February 2017 at 11:35, York Sun wrote: > When adding local memory to PCI region, gd->ram_size is correct only > if the memory is in one continuous block. In case memory is split > into several banks, each bank should be added separately. > > Signed-off-by: York Sun

Re: [U-Boot] [PATCH v3 1/2] spl: Add spl_early_init()

On 03/16/2017 11:39 PM, Simon Glass wrote: > Hi Marek, > > On 16 March 2017 at 16:37, Marek Vasut wrote: >> On 03/16/2017 11:28 PM, Simon Glass wrote: >>> Hi Marek, >>> >>> On 16 March 2017 at 16:24, Marek Vasut wrote: On 03/16/2017 11:21 PM, Simon Glass

Re: [U-Boot] [PATCH v3 1/2] spl: Add spl_early_init()

Hi Marek, On 16 March 2017 at 16:37, Marek Vasut wrote: > On 03/16/2017 11:28 PM, Simon Glass wrote: >> Hi Marek, >> >> On 16 March 2017 at 16:24, Marek Vasut wrote: >>> On 03/16/2017 11:21 PM, Simon Glass wrote: Hi Marek, On 16 March 2017 at 16:17,

Re: [U-Boot] [PATCH v4 1/1] usb: gadget: avoid variable name clipping in cb_getvar

On 03/13/2017 11:30 AM, Nicolas le bayon wrote: > From: Nicolas Le Bayon > > Instead of using a fixed-size array to store variable name, preferring a > dynamic allocation treats correctly all variable name lengths. > Variable names are growing through releases and features.

Re: [U-Boot] [PATCH v3 1/2] spl: Add spl_early_init()

On 03/16/2017 11:28 PM, Simon Glass wrote: > Hi Marek, > > On 16 March 2017 at 16:24, Marek Vasut wrote: >> On 03/16/2017 11:21 PM, Simon Glass wrote: >>> Hi Marek, >>> >>> On 16 March 2017 at 16:17, Marek Vasut wrote: On 03/15/2017 01:06 AM, Simon Glass

Re: [U-Boot] [PATCH v3 1/2] spl: Add spl_early_init()

Hi Marek, On 16 March 2017 at 16:24, Marek Vasut wrote: > On 03/16/2017 11:21 PM, Simon Glass wrote: >> Hi Marek, >> >> On 16 March 2017 at 16:17, Marek Vasut wrote: >>> On 03/15/2017 01:06 AM, Simon Glass wrote: From: Eddie Cai

Re: [U-Boot] [PATCH v3 1/2] spl: Add spl_early_init()

On 03/16/2017 11:21 PM, Simon Glass wrote: > Hi Marek, > > On 16 March 2017 at 16:17, Marek Vasut wrote: >> On 03/15/2017 01:06 AM, Simon Glass wrote: >>> From: Eddie Cai >>> >>> At present malloc_base/_limit/_ptr are not initialised in spl_init() when

[U-Boot] [PATCH v2] Pass empty CFLAGS on invocation of libfdt/setup.py

When building u-boot tools in cross-build environment CFLAGS environment variable set up for target is taken into an account when building code for host. Make it empty on invocation of python. This fixes the following build errors when cross-compiling for xtensa: cc1: error: unrecognized

Re: [U-Boot] [PATCH v4 2/2] rockchip: rk3288: use spl_early_init() instead of spl_init()

Hi Kever, On 16 March 2017 at 01:08, Kever Yang wrote: > Hi Eddie, Simon, > > Could you help to correct rk3188, rk3399 spl at the same time? I don't have boards to test with for these, sorry. Regards, Simon ___ U-Boot

Re: [U-Boot] [PATCH v4 2/2] rockchip: rk3288: use spl_early_init() instead of spl_init()

On 16 March 2017 at 09:04, Eddie Cai wrote: > > > 2017-03-15 22:43 GMT+08:00 Simon Glass : >> >> From: Eddie Cai >> >> Use spl_early_init() to make sure that early malloc() is initialised. This >> fixes booting on

Re: [U-Boot] [PATCH v4 1/2] spl: Add spl_early_init()

On 16 March 2017 at 09:02, Eddie Cai wrote: > > > 2017-03-15 22:43 GMT+08:00 Simon Glass : >> >> From: Eddie Cai >> >> At present malloc_base/_limit/_ptr are not initialised in spl_init() when >> we call spl_init() in

Re: [U-Boot] [PATCH v3 1/2] spl: Add spl_early_init()

Hi Marek, On 16 March 2017 at 16:17, Marek Vasut wrote: > On 03/15/2017 01:06 AM, Simon Glass wrote: >> From: Eddie Cai >> >> At present malloc_base/_limit/_ptr are not initialised in spl_init() when >> we call spl_init() in board_init_f(). > > Are you

Re: [U-Boot] [PATCH v3 1/2] spl: Add spl_early_init()

On 03/15/2017 01:06 AM, Simon Glass wrote: > From: Eddie Cai > > At present malloc_base/_limit/_ptr are not initialised in spl_init() when > we call spl_init() in board_init_f(). Are you even supposed to call spl_init() from board_init_f() ? I was under the impression

Re: [U-Boot] [PATCH v2 2/8] Revert "spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible"

On 03/16/2017 11:11 PM, Rush, Jason A. wrote: > Marek Vasut wrote: >> On 03/14/2017 03:23 PM, Rush, Jason A. wrote: >>> Marek Vasut wrote: On 03/07/2017 04:18 PM, Rush, Jason A. wrote: > Marek Vasut wrote: >> On 03/03/2017 04:17 PM, Rush, Jason A. wrote: >>> Marek Vasut wrote:

Re: [U-Boot] [PATCH v2 2/8] Revert "spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible"

Marek Vasut wrote: > On 03/14/2017 03:23 PM, Rush, Jason A. wrote: >> Marek Vasut wrote: >>> On 03/07/2017 04:18 PM, Rush, Jason A. wrote: Marek Vasut wrote: > On 03/03/2017 04:17 PM, Rush, Jason A. wrote: >> Marek Vasut wrote: >>> On 03/01/2017 05:36 PM, Rush, Jason A. wrote:

Re: [U-Boot] [PATCH v2 00/20] Add Intel Arria 10 SoC support

On 03/09/2017 01:26 AM, Ley Foon Tan wrote: > This is the 2nd version of patchset to adds support for Intel Arria 10 SoC. > This version mainly resolved comments from Marek in [v1]. > > This is initial patchset enables the basic support for Arria 10 and other > features will come after this. > >

Re: [U-Boot] [PATCH v3 1/2] armv7m: add instruction & data cache support

Hi Vikas, On 14 March 2017 at 11:27, Vikas Manocha wrote: > This patch adds armv7m instruction & data cache support. > > Signed-off-by: Vikas Manocha > cc: Christophe KERELLO > --- > > Changed in v3: > - uint32 replcaed

Re: [U-Boot] [PATCH 2/4] Kconfig: introduce md5sum command selection

On 14 March 2017 at 19:19, Andre Przywara wrote: > So far CONFIG_MD5SUM would need to be set by a board's include file. > Since the command is really generic, move it over to Kconfig to allow > it to be defined by either a board's defconfig, menuconfig or some > config

Re: [U-Boot] [PATCH] Pass empty CFLAGS on invocation of libfdt/setup.py

Hi Max, On 16 March 2017 at 12:38, Max Filippov wrote: > > When building u-boot tools in cross-build environment CFLAGS environment > variable set up for target is taken into an account when building code > for host. Set it to empty on invocation of python. > > This fixes the

Re: [U-Boot] [PATCH 1/4] kirkwood: remove get_random_hex() and MD5 dependency

On 14 March 2017 at 19:19, Andre Przywara wrote: > Commit 19a5944fcd62 ("mvgbe: remove setting of ethaddr within the > driver") removed the usage of get_random_hex() from the mvgbe driver > about six years ago. However the prototype of that function survived > till today

Re: [U-Boot] [PATCHv3 3/3] lib: move hash CONFIG options to Kconfig

Hi Tom, On 9 March 2017 at 11:44, Tom Rini wrote: > On Tue, Mar 07, 2017 at 11:20:08AM -0500, Tom Rini wrote: >> Commit 94e3c8c4fd7b ("crypto/fsl - Add progressive hashing support >> using hardware acceleration.") created entries for CONFIG_SHA1, >> CONFIG_SHA256,

Re: [U-Boot] [PATCH 3/4] Kconfig: define MD5 dependency for FIT support

On 14 March 2017 at 19:19, Andre Przywara wrote: > FIT images require MD5 support to verify image checksums. So far this > was expressed by defining a CPP symbol in image.h. Since MD5 is now a > first class Kconfig citizen, express that in Kconfig instead. > >

Re: [U-Boot] [PATCH 4/4] configs: move CMD_MD5SUM definition to defconfigs

Hi Andre, On 14 March 2017 at 19:19, Andre Przywara wrote: > Boards with an apparent need for the md5sum command had the connected > config symbol defined in their board header file. > Move this over to the respective defconfig files now that md5sum is > configured via

Re: [U-Boot] [PATCH v2 1/2] armv7m: add instruction & data cache support

On 03/16/2017 10:39 PM, vikas wrote: > Thanks Marek, > > On 03/16/2017 02:40 PM, Marek Vasut wrote: >> On 03/13/2017 10:45 PM, vikas wrote: >>> Thanks Marek, >>> >>> On 03/11/2017 10:02 PM, Marek Vasut wrote: On 03/12/2017 01:13 AM, Vikas Manocha wrote: > This patch adds armv7m

Re: [U-Boot] [PATCH v2 1/2] armv7m: add instruction & data cache support

Thanks Marek, On 03/16/2017 02:40 PM, Marek Vasut wrote: > On 03/13/2017 10:45 PM, vikas wrote: >> Thanks Marek, >> >> On 03/11/2017 10:02 PM, Marek Vasut wrote: >>> On 03/12/2017 01:13 AM, Vikas Manocha wrote: This patch adds armv7m instruction & data cache support. Signed-off-by:

Re: [U-Boot] [PATCH 29/31] ARM: dts: k2g: Add DT support for K2G Industrial Communication Engine evm

On 03/09/2017 07:09 AM, Tom Rini wrote: > On Thu, Mar 02, 2017 at 01:04:33PM -0600, Franklin S Cooper Jr wrote: > >> Add basic DT support for K2G ICE evm. Only minimal peripherals are >> supported to allow console output and MMC boot. >> >> Signed-off-by: Franklin S Cooper Jr

Re: [U-Boot] [PATCH 28/31] ARM: dts: k2g: Disable netcp by default

On 03/09/2017 07:09 AM, Tom Rini wrote: > On Thu, Mar 02, 2017 at 01:04:32PM -0600, Franklin S Cooper Jr wrote: > >> Disable netcp by default like all other peripherals in the dtsi file. >> Enable the peripheral explicitly in the board specific dts file. >> >> Signed-off-by: Franklin S Cooper

Re: [U-Boot] [PATCH] Pass empty CFLAGS on invocation of libfdt/setup.py

On Thu, Mar 16, 2017 at 2:11 PM, Tom Rini wrote: > On Thu, Mar 16, 2017 at 11:38:00AM -0700, Max Filippov wrote: > >> When building u-boot tools in cross-build environment CFLAGS environment >> variable set up for target is taken into an account when building code >> for host.

[U-Boot] [PATCH 17/17] aspeed: Network Driver configuration for EVB

Enable Network Driver along with network related commands -- ping, dhcp, mii -- in ast2500 Eval Board's defconfig. Add MAC devices' configuration to Eval Board Device Tree. Signed-off-by: Maxim Sloyko --- --- arch/arm/dts/ast2500-evb.dts | 14 ++

Re: [U-Boot] [PATCH 18/31] defconfig: keystone2: Enable U-boot runtime DTB detection

On 03/09/2017 07:08 AM, Tom Rini wrote: > On Thu, Mar 02, 2017 at 01:04:22PM -0600, Franklin S Cooper Jr wrote: > >> Enable various config options to allow U-boot at runtime to select the >> proper dtb to use from the list of dtb's within the FIT image. >> >> Signed-off-by: Franklin S Cooper Jr

Re: [U-Boot] [U-Boot 0/3] introduce Rockchip rockusb

On 03/15/2017 08:56 AM, Eddie Cai wrote: > rockusb is a protocol run between host pc and device. it help people get > device > info, flash image to device. this patch implement rockusb on device side. What is the benefit of this yet-another NIH protocol compared to ie. DFU/UMS/Thor/Fastboot ?

Re: [U-Boot] [PATCH v2 2/8] Revert "spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible"

On 03/14/2017 03:23 PM, Rush, Jason A. wrote: > Marek Vasut wrote: >> On 03/07/2017 04:18 PM, Rush, Jason A. wrote: >>> Marek Vasut wrote: On 03/03/2017 04:17 PM, Rush, Jason A. wrote: > Marek Vasut wrote: >> On 03/01/2017 05:36 PM, Rush, Jason A. wrote: >>> This reverts commit

[U-Boot] [PATCH 15/17] aspeed: Cleanup ast2500-u-boot.dtsi Device Tree

Remove unnecessary apb and ahb nodes and just override necessary nodes/values. Signed-off-by: Maxim Sloyko --- arch/arm/dts/ast2500-u-boot.dtsi | 41 1 file changed, 21 insertions(+), 20 deletions(-) diff --git

[U-Boot] [PATCH 16/17] aspeed: Add AST2500/AST2400 compatible NIC Driver

The device that Aspeed uses is basically Faraday FTGMAC100, but with some differences here and there. Since I don't have access to a properly implemented FTGMAC100 though, I can't really test it and so I don't feel comfortable claiming compatibility, even though I reused a lot of FTGMAC100 driver

[U-Boot] [PATCH 14/17] aspeed: Refactor SCU to use consistent mask & shift

Refactor SCU header to use consistent Mask & Shift values. Now, consistently, to read value from SCU register, mask needs to be applied before shift. Signed-off-by: Maxim Sloyko --- arch/arm/include/asm/arch-aspeed/scu_ast2500.h | 12

Re: [U-Boot] [PATCH v2 1/2] armv7m: add instruction & data cache support

On 03/13/2017 10:45 PM, vikas wrote: > Thanks Marek, > > On 03/11/2017 10:02 PM, Marek Vasut wrote: >> On 03/12/2017 01:13 AM, Vikas Manocha wrote: >>> This patch adds armv7m instruction & data cache support. >>> >>> Signed-off-by: Vikas Manocha >>> --- >>> >>> Changed in

[U-Boot] [PATCH 12/17] aspeed: Enable I2C in EVB defconfig

Enable I2C driver in ast2500 Eval Board defconfig. Also enable i2c command. Signed-off-by: Maxim Sloyko --- configs/evb-ast2500_defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/configs/evb-ast2500_defconfig b/configs/evb-ast2500_defconfig index

[U-Boot] [PATCH 11/17] aspeed: Add I2C Driver

Add Device Model based I2C driver for ast2500/ast2400 SoCs. The driver is very limited, it only supports master mode and synchronous byte-by-byte reads/writes, no DMA or Pool Buffers. Signed-off-by: Maxim Sloyko --- drivers/i2c/Kconfig | 9 ++ drivers/i2c/Makefile | 1

Re: [U-Boot] [PATCH v3 1/2] armv7m: add instruction & data cache support

On 03/14/2017 06:27 PM, Vikas Manocha wrote: > This patch adds armv7m instruction & data cache support. > > Signed-off-by: Vikas Manocha > cc: Christophe KERELLO > --- > > Changed in v3: > - uint32 replcaed with u32. > - multiple read of

[U-Boot] [PATCH 08/17] aspeed: AST2500 Pinctrl Driver

This driver uses Generic Pinctrl framework and is compatible with the Linux driver for ast2500: it uses the same device tree configuration. Not all pins are supported by the driver at the moment, so it actually compatible with ast2400. In general, however, there are differences that in the future

[U-Boot] [PATCH 07/17] aspeed: Refactor AST2500 RAM Driver and Sysreset Driver

This change switches all existing users of ast2500 Watchdog to Driver Model based Watchdog driver. To perform system reset Sysreset Driver uses first Watchdog device found via uclass_first_device call. Since the system is going to be reset anyway it does not make much difference which watchdog is

[U-Boot] [PATCH 13/17] aspeed: Add support for Clocks needed by MACs

Add support for clocks needed by MACs to ast2500 clock driver. The clocks are D2-PLL, which is used by both MACs and PCLK_MAC1 and PCLK_MAC2 for MAC1 and MAC2 respectively. The rate of D2-PLL is hardcoded to 250MHz -- the value used in Aspeed SDK. It is not entirely clear from the datasheet how

[U-Boot] [PATCH 03/17] aspeed: Watchdog Timer Driver

This driver supports ast2500 and ast2400 SoCs. Only ast2500 supports reset_mask and thus the option of resettting individual peripherals using WDT. Signed-off-by: Maxim Sloyko --- arch/arm/include/asm/arch-aspeed/wdt.h | 53 -- arch/arm/mach-aspeed/ast_wdt.c

[U-Boot] [PATCH 10/17] aspeed: Add P-Bus clock in ast2500 clock driver

Add P-Bus Clock support to ast2500 clock driver. This is the clock used by I2C devices. Signed-off-by: Maxim Sloyko --- arch/arm/include/asm/arch-aspeed/scu_ast2500.h | 3 ++- drivers/clk/aspeed/clk_ast2500.c | 11 +++ 2 files changed, 13

[U-Boot] [PATCH 09/17] aspeed: Enable Pinctrl Driver in AST2500 EVB

Enable Pinctrl Driver in AST2500 Eval Board's defconfig Signed-off-by: Maxim Sloyko --- configs/evb-ast2500_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/evb-ast2500_defconfig b/configs/evb-ast2500_defconfig index 74808a71ee..f8ef9b779c 100644 ---

[U-Boot] [PATCH 04/17] aspeed: Make SCU lock/unlock functions part of SCU API

Make functions for locking and unlocking SCU part of SCU API. Many drivers need to modify settings in SCU and thus need to unlock it first. This change makes it possible. Signed-off-by: Maxim Sloyko --- arch/arm/include/asm/arch-aspeed/scu_ast2500.h | 14 ++

[U-Boot] [PATCH 06/17] aspeed: Device Tree configuration for Reset Driver

Add Reset Driver configuration to ast2500 SoC Device Tree and bindings for various reset signals Signed-off-by: Maxim Sloyko --- arch/arm/dts/ast2500-evb.dts | 15 +++ arch/arm/dts/ast2500-u-boot.dtsi | 10 +++

[U-Boot] [PATCH 05/17] aspeed: Reset Driver

Add Reset Driver for ast2500 SoC. This driver uses Watchdog Timer to perform resets and thus depends on it. The actual Watchdog device used needs to be configured in Device Tree using "aspeed,wdt" property, which must be WDT phandle, for example: rst: reset-controller { compatible =

[U-Boot] [PATCH 02/17] dm: Simple Watchdog uclass

This is a simple uclass for Watchdog Timers. It has four operations: start, restart, reset, stop. Drivers must implement start, restart and stop operations, while implementing reset is optional: It's default implementation expires watchdog timer in one clock tick. Signed-off-by: Maxim Sloyko

[U-Boot] [PATCH 01/17] aspeed: Update ast2500 Device Tree

Pull in the Device Tree for ast2500 from the mainline Linux kernel Signed-off-by: Maxim Sloyko --- arch/arm/dts/ast2500.dtsi | 881 +- 1 file changed, 880 insertions(+), 1 deletion(-) diff --git a/arch/arm/dts/ast2500.dtsi

[U-Boot] [PATCH 00/17] Expand Aspeed AST2500 Support

This series expands support for Aspeed AST2500 SoC, commonly used as Board Management Controller in many servers, to the point where it can actually be useful. The main goal of this series is I2C and Network drivers, the rest are either cleanups or supporting patches. Most notable among them is

[U-Boot] [PATCH] Kconfig: Don't use RSA_FREESCALE_EXP on IMX

The CAAM in IMX parts doesn't support public key hardware acceleration (PKHA), so don't use RSA_FREESCALE_EXP. If you try to use it on IMX (assuming you have the clocks enabled first) you will get back an "Invalid KEY Command" error since PKHA isn't a valid key destination for these parts.

Re: [U-Boot] [U-Boot,v2] Add support for Microchip LAN78xx

On Fri, Mar 10, 2017 at 06:38:10PM +, yuiko.osh...@microchip.com wrote: > From: Yuiko Oshino > > Add support for Microchip LAN7800 and 7850, USB to 10/100/1000 Ethernet > Controllers > > Signed-off-by: Yuiko Oshino > Cc: Marek Vasut

Re: [U-Boot] [PATCH] Pass empty CFLAGS on invocation of libfdt/setup.py

On Thu, Mar 16, 2017 at 11:38:00AM -0700, Max Filippov wrote: > When building u-boot tools in cross-build environment CFLAGS environment > variable set up for target is taken into an account when building code > for host. Set it to empty on invocation of python. > > This fixes the following

[U-Boot] [PATCH] ARM: am43xx: fix SOC revision print outs

Currently, AM43xx just re-uses the version strings from AM33xx which is wrong; the actual values for AM43xx are different. Fix this by adding a separate version string array for AM43xx and use this instead. Signed-off-by: Tero Kristo Reported-by: Sekhar Nori ---

[U-Boot] Why is ns16550 guarded by !OF_PLATDATA ?

I'm trying to use the ns16550 DM driver in a platform where havind a dtb in SPL is not plausible, so we're using platdata. Now for ns16550 The U_BOOT_DRIVER is guarded by !OF_PLATDATA, so the driver is not compiled in SPL. This seems inconsistent with other U_BOOT_DRIVERs. This was introduced

[U-Boot] [PATCH] armv8/fsl-layerscape: fdt: On ls1012 don't check sysclk for USB

USB requires 100MHz clock. On ls1012, sysclk(125MHz) is not for USB. Another 100MHz clock is for USB. So For USB, check if sysclk is 100MHz is failed on ls1012, sysclk is not for USB. Don't check sysclk for USB on ls1012. Signed-off-by: Yingxi Yu ---

[U-Boot] iMX6 (Arm) failing to initialize console. Hangs when running relocation code.

I have a board that is running u-boot based on "U-Boot 2009.08". I am in the process of developing another board that is very similar but want to upgrade the u-boot to "U-Boot 2013.06". The boards are NXP iMX6DL CPU (ARM) based with 32 bit DDR3 and console via UART1. These designs are based on

Re: [U-Boot] [U-Boot,v7,8/9] STiH410-B2260: Add device tree

On Tue, Feb 21, 2017 at 01:37:11PM +0100, Patrice Chotard wrote: > From: Patrice Chotard > > This device tree has been extracted from v4.9 kernel > > Signed-off-by: Patrice Chotard > Reviewed-by: Tom Rini > Reviewed-by:

Re: [U-Boot] [U-Boot,v7,3/9] STiH410: Add STi sysreset driver

On Tue, Feb 21, 2017 at 01:37:06PM +0100, Patrice Chotard wrote: > From: Patrice Chotard > > Signed-off-by: Patrice Chotard > Reviewed-by: Simon Glass Applied to u-boot/master, thanks! -- Tom signature.asc Description:

Re: [U-Boot] [U-Boot,v7,7/9] STiH410: Add STi pinctrl driver

On Tue, Feb 21, 2017 at 01:37:10PM +0100, Patrice Chotard wrote: > From: Patrice Chotard > > Add STMicroelectronics STiH410 pinctrl driver > > Signed-off-by: Patrice Chotard > Reviewed-by: Tom Rini > Reviewed-by: Simon Glass

Re: [U-Boot] tools: fix cross-compiling tools when HOSTCC is overridden

On Mon, Mar 13, 2017 at 05:43:16PM +0900, Masahiro Yamada wrote: > Richard reported U-Boot tools issues in OpenEmbedded/Yocto project. > > OE needs to be able to change the default compiler. If we pass in > HOSTCC through the make command, it overwrites all HOSTCC instances, > including ones in

Re: [U-Boot] [U-Boot, v7, 5/9] gpio: do not include for ARCH_STI

On Tue, Feb 21, 2017 at 01:37:08PM +0100, Patrice Chotard wrote: > From: Patrice Chotard > > As no gpio.h is defined in arch/arm/include/asm/arch-stih410, > to avoid compilation failure, do not include asm/arch/gpio.h. > > This is needed for example when including

Re: [U-Boot] [U-Boot, v7, 9/9] board: Add STMicroelectronics STiH410-B2260 support

On Tue, Feb 21, 2017 at 01:37:12PM +0100, Patrice Chotard wrote: > From: Patrice Chotard > > This is a 96Board compliant board based on STiH410 SoC: > - 1GB DDR > - On-Board USB combo WiFi/Bluetooth RTL8723BU > with PCB soldered antenna > - Ethernet 1000-BaseT

Re: [U-Boot] [U-Boot,v7,2/9] STiH410: Add STi timer driver

On Tue, Feb 21, 2017 at 01:37:05PM +0100, Patrice Chotard wrote: > From: Patrice Chotard > > Add ARM global timer based timer > > Signed-off-by: Patrice Chotard > Reviewed-by: Simon Glass Applied to u-boot/master, thanks!

Re: [U-Boot] [U-Boot, v3] arm64: booti: allow to place kernel image anywhere in physical memory

On Thu, Mar 09, 2017 at 04:28:25PM +0900, Masahiro Yamada wrote: > At first, the ARM64 Linux booting requirement recommended that the > kernel image be placed text_offset bytes from 2MB aligned base near > the start of usable system RAM because memory below that base address > was unusable at

Re: [U-Boot] [U-Boot,v7,4/9] STiH410: Add STi serial driver

On Tue, Feb 21, 2017 at 01:37:07PM +0100, Patrice Chotard wrote: > From: Patrice Chotard > > This patch adds support to ASC (asynchronous serial controller) > driver, which is basically a standard serial driver. This IP > is common across other STMicroelectronics SoCs >

Re: [U-Boot] [U-Boot,v7,6/9] STiH410: Add STi SDHCI driver

On Tue, Feb 21, 2017 at 01:37:09PM +0100, Patrice Chotard wrote: > From: Patrice Chotard > > Add SDHCI host controller found on STMicroelectronics SoCs > > On some ST SoCs, i.e. STiH407/STiH410, the MMC devices can live > inside a dedicated flashSS sub-system that

Re: [U-Boot] [U-Boot,1/2] igep00x0: disable environment

On Sun, Feb 19, 2017 at 12:23:39AM +0100, Ladislav Michl wrote: > ISEE's U-Boot and Linux are using 1bit ECC scheme, while we > switched to 8bit ECC to fullfill flash specification requirements. > However when trying to run U-Boot on board with 1bit ECC'd data > on flash, UBI code takes several

Re: [U-Boot] [U-Boot,v3] armv7m: Add SysTick timer driver

On Fri, Feb 17, 2017 at 08:22:17AM +, Phil Edworthy wrote: > The SysTick is a 24-bit down counter that is found on all ARM Cortex > M3, M4, M7 devices and is always located at a fixed address. > > The number of reference clock ticks that correspond to 10ms is normally > defined in the

Re: [U-Boot] [U-Boot, v7, 1/9] arm: Add support for STMicroelectronics STiH410 soc

On Tue, Feb 21, 2017 at 01:37:04PM +0100, Patrice Chotard wrote: > From: Patrice Chotard > > The STiH410 is an advanced multi-HD AVC processor with 3D > graphics acceleration and 1.5-GHz ARM Cortex-A9 SMP CPU > part of the STiH407 family. > > It has wide connectivity

Re: [U-Boot] [U-Boot, 2/2] igep00x0: fixup FDT according to detected flash type

On Sun, Feb 19, 2017 at 12:24:49AM +0100, Ladislav Michl wrote: > Leave only detected flash type enabled in FTD as otherwise GPMC CS is > claimed (and never freed) by Linux, causing 'concurent' flash type > not to be probed. > > Signed-off-by: Ladislav Michl Applied to

Re: [U-Boot] tiny-printf: add static to locally used functions

On Sun, Feb 12, 2017 at 06:08:43PM +0900, Masahiro Yamada wrote: > These two functions are only used in lib/tiny-printf.c . > > Signed-off-by: Masahiro Yamada > Tested-by: Andreas Färber > Reviewed-by: Stefan Roese Applied to

Re: [U-Boot] [U-Boot,v4] tools: omapimage: Fix size in header

On Wed, Feb 15, 2017 at 06:42:54PM +0530, Lokesh Vutla wrote: > The size field in GP header that is expected by ROM is size of the > image + size of the header. But omapimage generates a gp header > only with size of the image as size field. Fix it > > Signed-off-by: Lokesh Vutla

Re: [U-Boot] pull request: u-boot-uniphier/master

On Tue, Mar 14, 2017 at 05:57:31AM +0900, Masahiro Yamada wrote: > Hi Tom, > > Please pull my first round of UniPhier changes for v2017.05: > > - Fix regression of DRAM settings > - DT updates (fix W=1 warnings, re-sync with Linux) > > > (For Linux, I had already sent equivalent patches >

[U-Boot] [Resend] Please pull u-boot-fsl-qoriq master

Tom, The following changes since commit 8537ddd769f460d7fb7a62a3dcc9669049702e51: Prepare v2017.03 (2017-03-13 13:54:16 -0400) are available in the git repository at: git://git.denx.de/u-boot-fsl-qoriq.git for you to fetch changes up to 9b6639fa85bddd90df4c371f25a89c791a6ee6ef:

[U-Boot] [PATCH] Pass empty CFLAGS on invocation of libfdt/setup.py

When building u-boot tools in cross-build environment CFLAGS environment variable set up for target is taken into an account when building code for host. Set it to empty on invocation of python. This fixes the following build errors when cross-compiling for xtensa: cc1: error: unrecognized

Re: [U-Boot] [PATCH v4 2/2] rockchip: rk3288: use spl_early_init() instead of spl_init()

2017-03-15 22:43 GMT+08:00 Simon Glass : > From: Eddie Cai > > Use spl_early_init() to make sure that early malloc() is initialised. This > fixes booting on firefly-rk3288, for example. > > Signed-off-by: Eddie Cai >

Re: [U-Boot] [PATCH v4 1/2] spl: Add spl_early_init()

2017-03-15 22:43 GMT+08:00 Simon Glass : > From: Eddie Cai > > At present malloc_base/_limit/_ptr are not initialised in spl_init() when > we call spl_init() in board_init_f(). This is due to a recent change aimed > at avoiding overwriting the malloc

Re: [U-Boot] [U-Boot 0/2] add spl_early_init to fix rk3288 board broken issue

2017-03-16 9:39 GMT+08:00 Simon Glass : > Hi Eddie, > > On 6 March 2017 at 00:03, Eddie Cai wrote: > > Hi Simon > > I guess you may lost this patch. So a friendly ping. > > I did not lose it, but I thought I commented on it, that we needed to >

[U-Boot] [PATCH 13/22] x86: fsp: Save stack address to CMOS for next S3 boot

At the end of pre-relocation phase, save the new stack address to CMOS and use it as the stack on next S3 boot for fsp_init() continuation function. Signed-off-by: Bin Meng --- arch/x86/cpu/cpu.c | 8 arch/x86/include/asm/cmos_layout.h | 31

[U-Boot] [PATCH 02/22] x86: acpi: Add Kconfig option and header file for ACPI resume

This introduces a Kconfig option for ACPI S3 resume, as well as a header file to include anything related to ACPI S3 resume. Signed-off-by: Bin Meng --- arch/x86/Kconfig | 12 + arch/x86/include/asm/acpi_s3.h | 58

[U-Boot] [PATCH 12/22] x86: Add an early CMOS access library

This adds a library that provides CMOS (inside RTC SRAM) access at a very early stage when driver model is not available yet. Signed-off-by: Bin Meng --- arch/x86/include/asm/early_cmos.h | 43 + arch/x86/lib/Makefile | 1 +

[U-Boot] [PATCH 16/22] x86: apci: Change PM1_CNT register access to RMW

In enter_acpi_mode() PM1_CNT register is changed to PM1_CNT_SCI_EN directly without preserving its previous value. Update to change the register access to read-modify-write (RMW). Signed-off-by: Bin Meng --- arch/x86/lib/acpi_table.c | 4 +++- 1 file changed, 3

[U-Boot] [PATCH 19/22] x86: acpi: Turn on ACPI mode for S3

Before jumping to OS waking up vector, we need turn on ACPI mode for S3, just like what we do for a normal boot. Signed-off-by: Bin Meng --- arch/x86/lib/acpi_s3.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/lib/acpi_s3.c b/arch/x86/lib/acpi_s3.c index

[U-Boot] [PATCH 18/22] x86: acpi: Refactor acpi_resume()

To do something more in acpi_resume() like turning on ACPI mode, we need locate ACPI FADT table pointer first. But currently this is done in acpi_find_wakeup_vector(). This changes acpi_resume() signature to accept ACPI FADT pointer as the parameter. A new API acpi_find_fadt() is introduced, and

  1   2   >