Hi Marek,
On Sat, Jun 24, 2017 at 2:02 AM, Marek Vasut wrote:
> On 06/23/2017 11:54 AM, Bin Meng wrote:
>> xHCI spec says: the values of the 'route string' field shall be
>> initialized by the first 'Address Device' command issued to a
>> device slot, and shall not be modified by any other comman
Hi Marek,
On Sat, Jun 24, 2017 at 1:59 AM, Marek Vasut wrote:
> On 06/23/2017 11:54 AM, Bin Meng wrote:
>> USB 3.0 hub port status field has different bit positions from 2.0
>> hubs. Since U-Boot only understands the old version, translate the
>> new one into the old one.
>
> This is quite hairy.
Hi Marek,
On Sat, Jun 24, 2017 at 1:57 AM, Marek Vasut wrote:
> On 06/23/2017 11:54 AM, Bin Meng wrote:
>> Sometimes we need know if a given hub device is root hub or not.
>> Add a new API to test this.
>>
>> Signed-off-by: Bin Meng
>> ---
>>
>> common/usb_hub.c | 10 ++
>> include/usb.
On Fri, Jun 23, 2017 at 04:35:43PM -0400, Rob Clark wrote:
> On Fri, Jun 23, 2017 at 4:24 PM, Rob Clark wrote:
> > On Fri, Jun 23, 2017 at 10:32 AM, Tom Rini wrote:
> >> On Tue, Jun 20, 2017 at 05:55:25PM -0400, Rob Clark wrote:
> >>
> >>> Signed-off-by: Rob Clark
> >>> ---
> >>> Maybe there is
Add support for second revision of NI Ettus Research Project Sulfur
Revision 3 SDR board.
Signed-off-by: Moritz Fischer
---
arch/arm/dts/Makefile| 1 +
arch/arm/dts/zynq-ni-sulfur-rev3-uboot.dtsi | 26 ++
arch/arm/dts/zynq-ni-sulfur-rev3.dts | 325
Add support for second revision of NI Ettus Research Project Sulfur
Revision 2 SDR board.
Signed-off-by: Moritz Fischer
---
arch/arm/dts/Makefile| 1 +
arch/arm/dts/zynq-ni-sulfur-rev2-uboot.dtsi | 16 ++
arch/arm/dts/zynq-ni-sulfur-rev2.dts | 275
Hi Michal,
this series adds (basic) support for the NI Ettus Research Project Sulfur SDR.
I have a bunch of follow up patches that still need cleanup, so maybe we
can start with this.
I'm not entirely happy with duplicating a large amount of code from
the board/xilinx/zynq/board.c file so sugges
On Fri, Jun 23, 2017 at 4:24 PM, Rob Clark wrote:
> On Fri, Jun 23, 2017 at 10:32 AM, Tom Rini wrote:
>> On Tue, Jun 20, 2017 at 05:55:25PM -0400, Rob Clark wrote:
>>
>>> Signed-off-by: Rob Clark
>>> ---
>>> Maybe there is a better way to not hardcode this? But at least with
>>> the build of lk
On Fri, Jun 23, 2017 at 10:32 AM, Tom Rini wrote:
> On Tue, Jun 20, 2017 at 05:55:25PM -0400, Rob Clark wrote:
>
>> Signed-off-by: Rob Clark
>> ---
>> Maybe there is a better way to not hardcode this? But at least with
>> the build of lk that I have, the fdt table is at 0x81e0. I guess
>> t
On Fri, Jun 23, 2017 at 08:39:15PM +0200, Wolfgang Denk wrote:
> Dear Tom,
>
> In message <20170623140934.GD27196@bill-the-cat> you wrote:
> >
> > Since he addressed a number of the comments from the previous
> > discussions, it would be helpful to point out the things that were
> > overlooked, t
Simon Glass writes:
> If a system module is named the same as one of those used by binman we
> currently pick the system module. Adjust the ordering so that our modules
> are chosen instead.
>
> The module conflict reported was 'tools' from jira-python. I cannot access
> that package to test it.
Dear Tom,
In message <20170623140934.GD27196@bill-the-cat> you wrote:
>
> Since he addressed a number of the comments from the previous
> discussions, it would be helpful to point out the things that were
> overlooked, thanks!
I thought this should be clear from the previous discussion. The
maj
On 06/23/2017 11:54 AM, Bin Meng wrote:
> Sometimes we need know if a given hub device is root hub or not.
> Add a new API to test this.
>
> Signed-off-by: Bin Meng
> ---
>
> common/usb_hub.c | 10 ++
> include/usb.h| 8
> 2 files changed, 18 insertions(+)
>
> diff --git
On 06/23/2017 11:54 AM, Bin Meng wrote:
> xHCI spec says: the values of the 'route string' field shall be
> initialized by the first 'Address Device' command issued to a
> device slot, and shall not be modified by any other command.
>
> So far U-Boot does not program this field, and it does not pr
On 06/23/2017 11:54 AM, Bin Meng wrote:
> USB 3.0 hub port status field has different bit positions from 2.0
> hubs. Since U-Boot only understands the old version, translate the
> new one into the old one.
This is quite hairy. I'd rather see some protocol version agnostic flag
field rather than pa
On 06/23/2017 11:54 AM, Bin Meng wrote:
> Sometimes we need know if a given hub device is root hub or not.
> Add a new API to test this.
>
> Signed-off-by: Bin Meng
> ---
>
> common/usb_hub.c | 10 ++
> include/usb.h| 8
> 2 files changed, 18 insertions(+)
>
> diff --git
On 06/23/2017 11:54 AM, Bin Meng wrote:
> Use USB hub device's dev->uclass_priv to point to 'usb_hub_device'
> so that with driver model usb_hub_reset() and usb_hub_allocate()
> are no longer needed.
>
> Signed-off-by: Bin Meng
Can you trim down the ifdeffery somehow or keep it more contained ?
On 06/23/2017 11:54 AM, Bin Meng wrote:
> This cleans up the driver a little bit.
>
> Signed-off-by: Bin Meng
> ---
>
> drivers/usb/host/xhci-pci.c | 16 ++--
> 1 file changed, 2 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci
On 06/23/2017 11:54 AM, Bin Meng wrote:
> As there is no board that currently uses xhci-pci driver without DM
> USB, drop its support and leave only DM support.
You should add something into the Kconfig to make this driver depend on
DM_USB ; unless it's already there.
> Signed-off-by: Bin Meng
>
since commit: f8b7fff1d5c5 "serial: atmel_usart: Add clk support"
smartweb board comes not up anymore. Fix it.
Signed-off-by: Heiko Schocher
---
Changes in v2: None
arch/arm/dts/at91sam9260-smartweb.dts | 2 ++
board/siemens/smartweb/smartweb.c | 9 -
configs/smartweb_defconfig
fix warnings:
drivers/usb/gadget/at91_udc.c:1344:12: warning: 'at91rm9200_udc_init' defined
but not used [-Wunused-function]
drivers/usb/gadget/at91_udc.c:1379:13: warning: 'at91rm9200_udc_pullup' defined
but not used [-Wunused-function]
drivers/usb/gadget/at91_udc.c:1476:12: warning: 'at91sam926
since commit: f8b7fff1d5c5 "serial: atmel_usart: Add clk support"
smartweb board comes not up anymore. Fix it.
While at it, fix compiler warning for drivers/usb/gadget/at91_udc.c
Patchset comiles clean on travis.
Changes in v2:
- add comment from Lukasz Majewski and Tom Rini
delete not used f
From: Yuiko Oshino
Add an mii helper function to resolve flow control status per IEEE 802.3-2005
table 28B-3.
This function was taken from the linux source tree.
Signed-off-by: Yuiko Oshino
---
include/linux/mii.h | 23 +++
1 file changed, 23 insertions(+)
diff --git a/in
Hi,
On Fri, Jun 23, 2017 at 8:45 AM, Wolfgang Denk wrote:
> Dear Christophe,
>
> [adding Joe on Cc:]
>
> In message
>
> you wrote:
>> LXT973 PHY is a PHY of the LXT970 family. This patch
>> ensures the fec driver supports it.
>
> This patch is totally unrelated to 8xx; it should go through the
Hi,
On mvebu_db-88f3720 I am seeing endless resets when doing "scsi scan" or
"scan reset" (SATA). I am chain-loading U-Boot from the vendor U-Boot.
It seems the latest version working was v2017.01, v2017.03 is failing.
Haven't had time to bisect between releases yet.
Regards,
Andreas
--
SUSE L
Am 16.06.2017 um 02:05 schrieb Paul Burton:
> This commit allows an architecture to provide a Makefile.postlink whose
> u-boot target gets invoked after the u-boot ELF is linked. This will be
> of use for MIPS in a following commit.
>
> This mirrors Linux commit fbe6e37dab97 ("kbuild: add arch s
Am 19.06.2017 um 20:53 schrieb Paul Burton:
> U-Boot has up until now built with -fpic for the MIPS architecture,
> producing position independent code which uses indirection through a
> global offset table, making relocation fairly straightforward as it
> simply involves patching up GOT entries.
Tom,
there’s a few minor fixes on the Rockchip repository for you.
Regards,
Philipp.
The following changes since commit 235c5b8315c6a9eb566fd3d99a098cc6db869fc5:
Merge branch 'master' of git://git.denx.de/u-boot-samsung (2017-06-21
08:01:07 -0400)
are available in the git repository at:
On Wed, Jun 21, 2017 at 10:00:06AM +0900, Jaehoon Chung wrote:
> From: Minkyu Kang
>
> Dear Tom,
>
> The following changes since commit 5cafcbab580bac6c7f44ca4a164c422b7e1ecf20:
>
> Merge git://git.denx.de/u-boot-net (2017-06-03 18:05:28 -0400)
>
> are available in the git repository at:
>
On Tue, Jun 20, 2017 at 05:55:25PM -0400, Rob Clark wrote:
> Signed-off-by: Rob Clark
> ---
> Maybe there is a better way to not hardcode this? But at least with
> the build of lk that I have, the fdt table is at 0x81e0. I guess
> there must be a more robust way to do this, since presumably
Dear Tom,
On 21 June 2017 at 10:00, Jaehoon Chung wrote:
> From: Minkyu Kang
>
> Dear Tom,
>
> The following changes since commit 5cafcbab580bac6c7f44ca4a164c42
> 2b7e1ecf20:
>
> Merge git://git.denx.de/u-boot-net (2017-06-03 18:05:28 -0400)
>
> are available in the git repository at:
>
>
>
On Fri, Jun 23, 2017 at 03:54:10PM +0200, Wolfgang Denk wrote:
> Dear Christophe Leroy,
>
> In message <20170623125720.3F5FD6A48A@localhost.localdomain> you wrote:
> > Signed-off-by: Christophe Leroy
> > ---
> > v4: Restored some common CONFIG_ removed by 5xx removal in README and
> > config_wh
Hi Heiko,
> Hello Lukasz,
>
> Am 23.06.2017 um 14:50 schrieb Lukasz Majewski:
> > Hi Heiko,
> >
> >> fix warnings:
> >> drivers/usb/gadget/at91_udc.c:1344:12: warning:
> >> 'at91rm9200_udc_init' defined but not used [-Wunused-function]
> >> drivers/usb/gadget/at91_udc.c:1379:13: warning:
> >> 'at
On Fri, Jun 23, 2017 at 03:48:54PM +0200, Wolfgang Denk wrote:
> Dear Christophe Leroy,
>
> In message
> <8be66e1dd57e24e6442e88ec175161f5c819f993.1498132599.git.christophe.le...@c-s.fr>
> you wrote:
> > Signed-off-by: Christophe Leroy
>
> NAK.
>
> The patch does not even apply as there is n
Dear Christophe Leroy,
In message <20170623125720.3F5FD6A48A@localhost.localdomain> you wrote:
> Signed-off-by: Christophe Leroy
> ---
> v4: Restored some common CONFIG_ removed by 5xx removal in README and
> config_whitelist
> Removed all impacts on 4xx; Removed a few remaining references
Dear Christophe Leroy,
In message
<2ffe402f2d7b3c4d2156e6e1e9a871304c551efd.1498132599.git.christophe.le...@c-s.fr>
you wrote:
> CS Systemes d'Information (CSSI) manufactures two boards, named MCR3000
> and CMPC885 which are respectively based on MPC866 and MPC885 processors.
>
> This patch add
On Fri, Jun 23, 2017 at 9:39 PM, wrote:
> 在 2017-06-23 21:35，Maxime Ripard 写道：
>>
>> On Fri, Jun 23, 2017 at 09:24:25PM +0800, icen...@aosc.io wrote:
>>>
>>> 在 2017-06-07 20:51，Marc Zyngier 写道：
>>> > On 07/06/17 13:12, Icenowy Zheng wrote:
>>> > >
>>> > >
>>> > > 于 2017年6月7日 GMT+08:00 下午8:11:12,
Dear Christophe Leroy,
In message
<243f0cadb778fb5186d026bf0900fde56487e636.1498132599.git.christophe.le...@c-s.fr>
you wrote:
> For processors whose core runs at twice the bus frequency,
> the fallback frequency calculation in Linux provides a wrong
> result. Therefore, U-boot needs to pass the
On Fri, Jun 23, 2017 at 03:31:35PM +0200, Heiko Schocher wrote:
> Hello Lukasz,
>
> Am 23.06.2017 um 14:50 schrieb Lukasz Majewski:
> >Hi Heiko,
> >
> >>fix warnings:
> >>drivers/usb/gadget/at91_udc.c:1344:12: warning: 'at91rm9200_udc_init'
> >>defined but not used [-Wunused-function]
> >>drivers/
Dear Christophe Leroy,
In message
<8be66e1dd57e24e6442e88ec175161f5c819f993.1498132599.git.christophe.le...@c-s.fr>
you wrote:
> Signed-off-by: Christophe Leroy
NAK.
The patch does not even apply as there is no such file in mainline:
CONFLICT (modify/delete): arch/powerpc/cpu/mpc8xx/cpu_init
Dear Christophe,
[adding Joe on Cc:]
In message
you wrote:
> LXT973 PHY is a PHY of the LXT970 family. This patch
> ensures the fec driver supports it.
This patch is totally unrelated to 8xx; it should go through the
network maintainer [adding Joe on Cc:]
> Signed-off-by: Christophe Leroy
>
在 2017-06-23 21:35，Maxime Ripard 写道：
On Fri, Jun 23, 2017 at 09:24:25PM +0800, icen...@aosc.io wrote:
在 2017-06-07 20:51，Marc Zyngier 写道：
> On 07/06/17 13:12, Icenowy Zheng wrote:
> >
> >
> > 于 2017年6月7日 GMT+08:00 下午8:11:12, Marc Zyngier
> > 写到:
> > > On 07/06/17 08:00, Chen-Yu Tsai wrote:
> >
On Fri, Jun 23, 2017 at 09:24:25PM +0800, icen...@aosc.io wrote:
> 在 2017-06-07 20:51，Marc Zyngier 写道：
> > On 07/06/17 13:12, Icenowy Zheng wrote:
> > >
> > >
> > > 于 2017年6月7日 GMT+08:00 下午8:11:12, Marc Zyngier
> > > 写到:
> > > > On 07/06/17 08:00, Chen-Yu Tsai wrote:
> > > > > On Wed, Jun 7, 201
Hello Lukasz,
Am 23.06.2017 um 14:50 schrieb Lukasz Majewski:
Hi Heiko,
fix warnings:
drivers/usb/gadget/at91_udc.c:1344:12: warning: 'at91rm9200_udc_init'
defined but not used [-Wunused-function]
drivers/usb/gadget/at91_udc.c:1379:13: warning:
'at91rm9200_udc_pullup' defined but not used [-Wu
On Fri, Jun 23, 2017 at 02:57:40PM +0200, Christophe Leroy wrote:
> Signed-off-by: Christophe Leroy
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listin
On Fri, Jun 23, 2017 at 02:57:42PM +0200, Christophe Leroy wrote:
> For processors whose core runs at twice the bus frequency,
> the fallback frequency calculation in Linux provides a wrong
> result. Therefore, U-boot needs to pass the correct value.
>
> Signed-off-by: Christophe Leroy
Reviewed
On Fri, Jun 23, 2017 at 02:57:38PM +0200, Christophe Leroy wrote:
> LXT973 PHY is a PHY of the LXT970 family. This patch
> ensures the fec driver supports it.
>
> Signed-off-by: Christophe Leroy
Reviewed-by: Tom Rini
And, please make a note on your TODO list that the driver needs to be
update
在 2017-06-07 20:51，Marc Zyngier 写道：
On 07/06/17 13:12, Icenowy Zheng wrote:
于 2017年6月7日 GMT+08:00 下午8:11:12, Marc Zyngier
写到:
On 07/06/17 08:00, Chen-Yu Tsai wrote:
On Wed, Jun 7, 2017 at 2:50 PM, Maxime Ripard
wrote:
On Wed, Jun 07, 2017 at 11:47:24AM +0800, Chen-Yu Tsai wrote:
On Wed,
On Fri, Jun 23, 2017 at 10:42:42AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull 2 mvebu related pinctrl bug-fixes from Ken.
>
> Thanks,
> Stefan
>
> The following changes since commit 235c5b8315c6a9eb566fd3d99a098cc6db869fc5:
>
> Merge branch 'master' of git://git.denx.de/u-boot-sams
I tried to drop some old 85xx boards but got resistance from our silicon
support team. There is a demand to maintain those SoCs still shipping.
York
Sent from my iPhone
> On Jun 23, 2017, at 03:56, Simon Glass wrote:
>
> Hi York,
>
> There are about 258 mpc85xx boards. In converting things
CS Systemes d'Information (CSSI) manufactures two boards, named MCR3000
and CMPC885 which are respectively based on MPC866 and MPC885 processors.
This patch adds support for the first board.
Signed-off-by: Christophe Leroy
---
arch/powerpc/cpu/mpc8xx/Kconfig| 5 +
arch/powerpc/cpu/mpc8xx/
Signed-off-by: Christophe Leroy
---
arch/powerpc/cpu/mpc8xx/cpu_init.c | 12
1 file changed, 12 insertions(+)
diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c
b/arch/powerpc/cpu/mpc8xx/cpu_init.c
index f621d6285c..5da12faf21 100644
--- a/arch/powerpc/cpu/mpc8xx/cpu_init.c
+++ b/arch
For processors whose core runs at twice the bus frequency,
the fallback frequency calculation in Linux provides a wrong
result. Therefore, U-boot needs to pass the correct value.
Signed-off-by: Christophe Leroy
---
arch/powerpc/cpu/mpc8xx/fdt.c | 2 ++
1 file changed, 2 insertions(+)
diff --git
LXT973 PHY is a PHY of the LXT970 family. This patch
ensures the fec driver supports it.
Signed-off-by: Christophe Leroy
---
arch/powerpc/cpu/mpc8xx/fec.c | 4
1 file changed, 4 insertions(+)
diff --git a/arch/powerpc/cpu/mpc8xx/fec.c b/arch/powerpc/cpu/mpc8xx/fec.c
index b27310fffb..680d2
This serie adds MCR3000 board from CS Systemes d'Information.
Christophe Leroy (4):
powerpc, 8xx: add support for LXT973 PHY
powerpc, 8xx: Implement GLL2 ERRATA
powerpc, 8xx: Properly set CPM frequency in the device tree
powerpc, 8xx: Add support for MCR3000 board from CSSI
arch/powerpc/
Hi Heiko,
> fix warnings:
> drivers/usb/gadget/at91_udc.c:1344:12: warning: 'at91rm9200_udc_init'
> defined but not used [-Wunused-function]
> drivers/usb/gadget/at91_udc.c:1379:13: warning:
> 'at91rm9200_udc_pullup' defined but not used [-Wunused-function]
> drivers/usb/gadget/at91_udc.c:1476:12:
On Thu, Jun 22, 2017 at 03:41:28PM +0800, Bin Meng wrote:
> Hi Tom,
>
> The following changes since commit 235c5b8315c6a9eb566fd3d99a098cc6db869fc5:
>
> Merge branch 'master' of git://git.denx.de/u-boot-samsung
> (2017-06-21 08:01:07 -0400)
>
> are available in the git repository at:
>
> g
Dear Christophe,
In message <71d351cb-2c42-99a0-0b4b-64cfa74ec...@c-s.fr> you wrote:
>
> Ok, noted. Please take care to not remove anything that is common with
> 8xx before 8xx is back.
8xx is gone. Please get used to that fact.
> Yes I realised that after Tom suggested to perform a travis-CI
Update MC address caluclation as per MC design requirement
of address as least significant 512MB address
of MC private allocated memory.
Signed-off-by: Priyanka Jain
Signed-off-by: Ashish Kumar
---
drivers/net/fsl-mc/mc.c |7 ++-
1 files changed, 6 insertions(+), 1 deletions(-)
diff --
Patch makes below changes:
-Update QSPI flash type
As per updated board design,
different QSPI flash is connected on boards,
hence change QSPI flash type from
Micron n25q512a device to spansion s25fs512s
device in dts and config.
-Update QIXIS_QMAP_MASK value
Increase env size from 64kb to 256kb for qspi boot
Signed-off-by: Santan Kumar
Signed-off-by: Priyanka Jain
---
This patch is split version of another patch
https://patchwork.ozlabs.org/patch/773670/
include/configs/ls2080a_common.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff
For future extension, change xhci_setup_addressable_virt_dev()
signature to accept a pointer to 'struct usb_device', instead
of its members slot_id & speed, as the struct already contains
these two plus some other useful information of the device.
Signed-off-by: Bin Meng
---
drivers/usb/host/xh
For USB host controllers like xHC, its internal representation of
hub needs to be updated after the hub descriptor is fetched. This
adds a new op that does this.
Signed-off-by: Bin Meng
---
drivers/usb/host/usb-uclass.c | 11 +++
include/usb.h | 21 -
Now that we have a generic public API, remove the xHCI driver's own
version is_root_hub() and use the new API.
While we are here, remove the unused/commented out get_usb_device().
Signed-off-by: Bin Meng
---
drivers/usb/host/xhci.c | 24 ++--
1 file changed, 2 insertions(+)
After fetching hub descriptor, we need call USB uclass operation
update_hub_device() to notify HCD to do some preparation work.
Signed-off-by: Bin Meng
---
common/usb_hub.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/common/usb_hub.c b/common/usb_hub.c
index 4911981..2fc544
Use USB hub device's dev->uclass_priv to point to 'usb_hub_device'
so that with driver model usb_hub_reset() and usb_hub_allocate()
are no longer needed.
Signed-off-by: Bin Meng
---
common/usb_hub.c | 10 +-
drivers/usb/host/usb-uclass.c | 2 --
2 files changed, 9 insertio
xHCI spec says: the values of the 'route string' field shall be
initialized by the first 'Address Device' command issued to a
device slot, and shall not be modified by any other command.
So far U-Boot does not program this field, and it does not prevent
SS device directly attached to root port, or
So far LS/FS devices directly attached to xHC root port can be
successfully enumerated by xHCI driver, but if they are connected
behind a hub, the enumeration process fails to address the device.
It turns out xHCI driver still misses a part that in the device's
input slot context, all Transaction
Sometimes we need know if a given hub device is root hub or not.
Add a new API to test this.
Signed-off-by: Bin Meng
---
common/usb_hub.c | 10 ++
include/usb.h| 8
2 files changed, 18 insertions(+)
diff --git a/common/usb_hub.c b/common/usb_hub.c
index 18bd827..d780251 1
These two macros really need a parameter to make them useful.
Signed-off-by: Bin Meng
---
drivers/usb/host/xhci.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index cdce67c..a497d9d 100644
--- a/drivers/usb/host/xhci.h
The only work we need do in usb_setup_descriptor() is to initialize
dev->descriptor.bMaxPacketSize0, when do_read is false. Other steps
are the same as do_read being true.
While we are here, update the comment block to be within 80 cols.
Signed-off-by: Bin Meng
---
common/usb.c | 40 ++
There is no way to know whether the attached device is a hub or
not in advance before device's descriptor is fetched. But once
we know it's a high speed hub, per xHCI spec, we need tell xHC
it's a hub device by initializing hub related fields in the
input slot context.
Signed-off-by: Bin Meng
---
USB 3.0 hub port status field has different bit positions from 2.0
hubs. Since U-Boot only understands the old version, translate the
new one into the old one.
Since we are going to add USB 3.0 hub support, this feature is only
available with driver model USB.
Signed-off-by: Bin Meng
---
commo
USB 3.0 hub uses a hub depth value multiplied by four as an offset
into the 'route string' to locate the bits it uses to determine the
downstream port number. We shall set the hub depth value of a USB
3.0 hub after it is configured.
Signed-off-by: Bin Meng
---
common/usb_hub.c | 52 ++
A high speed hub has a special responsibility to handle full speed/
low speed devices connected on downstream ports. In this case, the
hub must isolate the high speed signaling environment from the full
speed/low speed signaling environment with the help of Transaction
Translator (TT). TT details a
As there is no board that currently uses xhci-pci driver without DM
USB, drop its support and leave only DM support.
Signed-off-by: Bin Meng
---
drivers/usb/host/xhci-pci.c | 52 -
1 file changed, 52 deletions(-)
diff --git a/drivers/usb/host/xhci-pc
This cleans up the driver a little bit.
Signed-off-by: Bin Meng
---
drivers/usb/host/xhci-pci.c | 16 ++--
1 file changed, 2 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 5ad8452..56fd650 100644
--- a/drivers/usb/host/xh
This series is a follow-up series to previous series [1] that adds
support for USB 3.0 hubs.
USB 3.0 hubs have slightly different hub descriptor format, as well
as different port status bit positions. These needs to be properly
handled by U-Boot USB core stack codes. xHCI driver has also been
upda
Rockchip rk322x sysreset is much like rk3036 and other Rockchip SoCs,
only difference is that the target register address is different.
Signed-off-by: Kever Yang
Reviewed-by: Philipp Tomsich
---
Changes in v2: None
drivers/sysreset/sysreset_rk322x.c | 45 ++
evb_rk3229 is a RK3229 based board, with:
- 8GB eMMC;
- 1GB DDR SDRAM;
- 2 USB2.0 HOST port;
- 1 MAC port;
- 1 HDMI port;
- IR;
- WiFi;
Signed-off-by: Kever Yang
Reviewed-by: Philipp Tomsich
---
Changes in v2: None
arch/arm/mach-rockchip/Kconfig | 1 +
board/rockchip/evb_rk3229/Kconf
Enable soc support for SPL and U-boot skeleton.
Signed-off-by: Kever Yang
Reviewed-by: Philipp Tomsich
---
Changes in v2:
- some update for sdram common code
arch/arm/include/asm/arch-rockchip/clock.h| 1 +
arch/arm/mach-rockchip/Kconfig| 13 +++
arch/arm/mach-rockchip/
The dts files are from kernel and with modify to adapt U-Boot.
Signed-off-by: Kever Yang
Reviewed-by: Philipp Tomsich
---
Changes in v2: None
arch/arm/dts/rk3229-evb.dts| 77
arch/arm/dts/rk322x.dtsi | 710 +
include/dt-bindings/
Add init pinctrl driver support for:
- i2c;
- spi;
- uart;
- pwm;
- emmc/sdmmc;
Signed-off-by: Kever Yang
Reviewed-by: Philipp Tomsich
---
Changes in v2: None
arch/arm/include/asm/arch-rockchip/grf_rk322x.h | 519
drivers/pinctrl/Kconfig | 10
Add clock driver init support for:
- cpu, bus clock init;
- emmc, sdmmc clock;
- ddr clock;
Signed-off-by: Kever Yang
Reviewed-by: Philipp Tomsich
---
Changes in v2:
- update copyright
- fix typo
arch/arm/include/asm/arch-rockchip/cru_rk322x.h | 215
drivers/clk/rockchip/Makefile
Add support for rk322x package header in mkimage tool.
Signed-off-by: Kever Yang
Reviewed-by: Philipp Tomsich
---
Changes in v2: None
tools/rkcommon.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/rkcommon.c b/tools/rkcommon.c
index fd95abc..6e9595f 100644
--- a/tools/rkcommon.c
+
RK3229 is a Quad-core Cortex-A7 SoC, which supports:
- 4K 10bit H.264/H.265,VP9.
- 32KB internal memory;
- eMMC 4.5.1, SD3.0;
- DDR3, LPDDR2, LPDDR3;
- HDMI 2.0 output, 4K@60Hz;
- USB2.0 OTG and USB2.0 host;
Changes in v2:
- update copyright
- fix typo
- some update for sdram common code
Kever
Kever,
> On 23 Jun 2017, at 10:46, Dr. Philipp Tomsich
> wrote:
>
+int rk322x_sysreset_request(struct udevice *dev, enum sysreset_t type)
+{
+struct rk322x_cru *cru = rockchip_get_cru();
+
+if (IS_ERR(cru))
+return PTR_ERR(cru);
+switch (ty
> On 23 Jun 2017, at 10:49, Kever Yang wrote:
>
> Hi Philipp,
>
>
> On 06/12/2017 07:00 PM, Philipp Tomsich wrote:
>>
>>
>> On Fri, 9 Jun 2017, Kever Yang wrote:
>>
>>> Add clock driver init support for:
>>> - cpu, bus clock init;
>>> - emmc, sdmmc clock;
>>> - ddr clock;
>>>
>>> Signed-of
Hi Philipp,
On 06/12/2017 07:00 PM, Philipp Tomsich wrote:
On Fri, 9 Jun 2017, Kever Yang wrote:
Add clock driver init support for:
- cpu, bus clock init;
- emmc, sdmmc clock;
- ddr clock;
Signed-off-by: Kever Yang
---
arch/arm/include/asm/arch-rockchip/cru_rk322x.h | 215
dr
Kever,
> On 23 Jun 2017, at 10:41, Kever Yang wrote:
>
> Hi Philipp,
>
>
> On 06/12/2017 10:19 PM, Philipp Tomsich wrote:
>>
>>
>> On Fri, 9 Jun 2017, Kever Yang wrote:
>>
>>> Rockchip rk322x sysreset is much like rk3036 and other Rockchip SoCs,
>>> only difference is that the target regist
Hi Tom,
please pull 2 mvebu related pinctrl bug-fixes from Ken.
Thanks,
Stefan
The following changes since commit 235c5b8315c6a9eb566fd3d99a098cc6db869fc5:
Merge branch 'master' of git://git.denx.de/u-boot-samsung (2017-06-21
08:01:07 -0400)
are available in the git repository at:
git://
Hi Philipp,
On 06/12/2017 10:19 PM, Philipp Tomsich wrote:
On Fri, 9 Jun 2017, Kever Yang wrote:
Rockchip rk322x sysreset is much like rk3036 and other Rockchip SoCs,
only difference is that the target register address is different.
Signed-off-by: Kever Yang
---
drivers/sysreset/sysreset
On 22.06.2017 11:13, m...@marvell.com wrote:
From: Ken Ma
In armada_37xx_gpiochip_register, the return value of fdtdec_get_bool
should be true when gpio-controller is found; current codes makes a
wrong inverse return value judgement, this patch fixes it.
Signed-off-by: Ken Ma
Cc: Stefan Roese
On 22.06.2017 11:13, m...@marvell.com wrote:
From: Ken Ma
If north bridge selection register bit1 is clear, pins [10:8] are for
SDIO0 Resetn, Wakeup, and PDN while if bit1 is set, pins [10:8]are for
GPIO; when bit1 is clear, pin 9 and pin 10 can be used for uart2 RTSn
and CTSn, so bit1 should b
Hi all
I do some test on my board which have two armv8 CA53 core, and I found some
region (1MB size) don't be correctly mapped by MMU. Through ds5 I can't find
this region were mapped.
I did some deep debug and found add_map function in cache_v8.c files maybe
have some wrong operation for Some
Hello Heiko,
Le 22/06/2017 à 15:06, Heiko Schocher a écrit :
Hello Christophe,
Am 22.06.2017 um 13:20 schrieb Christophe LEROY:
Le 22/06/2017 à 11:59, Wolfgang Denk a écrit :
Dear Christophe,
In message <0784ad6e-86ab-9c1d-1b81-a5cacaf2b...@c-s.fr> you wrote:
Please see my previous comm
Hi Simon,
On 06/17/2017 11:41 AM, Simon Glass wrote:
On 13 June 2017 at 03:29, Kever Yang wrote:
Add sdram driver in U-Boot for get the correct sdram size from
sys_reg, so that U-Boot can co-work with Rockchip loader or SPL
to get different dram capability and then tell the kernel.
Do you th
The rv1108 do not have DRAM driver now, so disable it first,
or else it will get conflict with the sdram common code.
Signed-off-by: Kever Yang
---
Changes in v2: None
configs/evb-rv1108_defconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/configs/evb-rv1108_defconfig b/configs/evb-rv1
Add dmc node to enable sdram driver.
Signed-off-by: Kever Yang
---
Changes in v2: None
arch/arm/dts/rk3368.dtsi | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/dts/rk3368.dtsi b/arch/arm/dts/rk3368.dtsi
index 025dc32..9daf765 100644
--- a/arch/arm/dts/rk3368.dtsi
+++ b/arch
The bank0 ram size should be the DRAM size minus reserved size,
the DRAM size may be 1GB, 2GB, 4GB, we can not hard code it.
Signed-off-by: Kever Yang
---
Changes in v2:
- move the dram_init_banksize() from board file into soc file for we
have the same setting for different board in one SoC no
1 - 100 of 115 matches
Mail list logo
