Hi,
On Thu, Nov 30, 2017 at 12:23:06AM +, André Przywara wrote:
> Hi Maxime,
>
> On 28/11/17 10:34, Maxime Ripard wrote:
> > The partitions variable is especially useful to create a partition table
> > from U-Boot, either directly from the U-Boot shell, or through flashing
> > tools like fast
On 21.11.2017 10:54, Marek Vasut wrote:
On 11/21/2017 03:52 AM, York Sun wrote:
On 11/18/2017 11:09 AM, York Sun wrote:
Commit 72443c7f7d21 ("mtd: cfi: Add support for status register
polling") added a feature check to determine if status register
is available for certain flash chips. The "lowe
For example to store the environment in a file named "/uboot.env" in MMC
"0", where partition "1" contains the EXT4 filesystem, the following
configs should be added to the board's default config:
CONFIG_ENV_IS_IN_EXT4=y
CONFIG_ENV_EXT4_DEVICE_AND_PART="0:1"
CONFIG_ENV_EXT4_FILE="/uboot.env"
This commit adds support for 96Boards Dragonboard820C.
The board is based on APQ8086 Qualcomm Soc, complying with the
96Boards specification.
Features
- 4x Kyro CPU (64 bit) up to 2.15GHz
- USB2.0
- USB3.0
- ISP
- Qualcomm Hexagon DSP
- SD 3.0 (UHS-I)
- UFS 2.0
- Qualcomm Adreno 530 GPU
In preparation to add support for the Dragonboard820c (APQ8096),
refactor the current Snapdragon clock driver.
No new functionality has been added.
---
arch/arm/mach-snapdragon/Makefile | 6 +-
arch/arm/mach-snapdragon/clock-apq8016.c | 181 ++---
arch
this patch enable rockusb support on rk3288 based device.
Signed-off-by: Eddie Cai
Reviewed-by: Simon Glass
Changes in v10:
-rebase to latest mainline U-Boot, add vyasa board support
Changes in v9:
-fix compile error
Changes in v8:
-fix compile error
Changes in v7:
-use imply in the Kconfig
add a simple readme to introduce rockusb and tell people how to use it
Signed-off-by: Eddie Cai
Reviewed-by: Simon Glass
Changes in v10:
-none
Changes in v9:
-none
Changes in v8:
-none
Changes in v7:
-none
Changes in v6:
-none
Changes in v5:
-none
Changes in v4:
-add some blank line to ma
this patch add rockusb command. the usage is
rockusb
e.g. rockusb 0 mmc 0
Signed-off-by: Eddie Cai
Reviewed-by: Simon Glass
Changes in v10:
-fix build error
Changes in v9:
-none
Changes in v8:
-none
Changes in v7:
-none
Changes in v6:
-none
Changes in v5:
-none
Changes in v4:
-move USB
this patch implement rockusb protocol on the device side. this is based on USB
download gadget infrastructure. the rockusb function implements the rd, wl, rid
commands. it can work with rkdeveloptool
Signed-off-by: Eddie Cai
Reviewed-by: Simon Glass
Changes in v10:
-fix build error
Changes in
Changes in v10:
-rebase to latest mainline U-Boot
-fix build error
Changes in v9:
-rebase to the latest mainline
-fix compile error
Changes in v8:
-rebase to v2017.09-rc2
-fix compile error
Changes in v7:
-use imply in the Kconfig to enable rockusb
Changes in v6:
-enable rockusb in defconfig
-m
Sets DDR configuration parameter cdr1 before all other settings
to support case 0.9v VDD is enabled for some SoCs
Signed-off-by: Ashish Kumar
Signed-off-by: Rajesh Bhagat
---
drivers/ddr/fsl/fsl_ddr_gen4.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/ddr/fsl/fs
When VID feature is supported, check the contents of fuse register
and configure DDR operate at 0.9v.
Signed-off-by: Ashish Kumar
Signed-off-by: Rajesh Bhagat
---
board/freescale/ls1088a/ddr.c | 21 +
1 file changed, 21 insertions(+)
diff --git a/board/freescale/ls1088a/ddr
This patch adds the support for VID on LS1088AQDS and LS1088ARDB systems.
It reads the fusesr register and changes the VDD accordingly by adjusting
the voltage via LTC3882 regulator.
This patch also takes care of the special case of 0.9V VDD is present in
fusesr register. In that case,it also chan
Adds a VID specific API in init_sequence_f and spl code flow
namely init_func_vid which is required to adjust core voltage.
VID specific code is required in spl, hence moving flag CONFIG_VID
out of spl flags.
Signed-off-by: Ashish Kumar
Signed-off-by: Rajesh Bhagat
---
arch/arm/cpu/armv8/fsl-l
Adds below voltage values supported by LS1088A Soc:
1.025 V(default), 0.9875V, 0.9750 V, 0.9V, 1.0 V, 1.0125 V, 1.0250 V
Signed-off-by: Ashish Kumar
Signed-off-by: Rajesh Bhagat
---
Changes in v7:
None
Restructures common driver to support LTC3882 voltage regulator
chip.
Signed-off-by: Ashish Kumar
Signed-off-by: Rajesh Bhagat
---
Changes in v7:
None
Changes in v6:
Adds below LTC3882 voltage regulator config:
CONFIG_VOL_MONITOR_LTC3882_READ
CONFIG_VOL_MONITOR_LTC3882_SET
Signed-off-by: Ashish Kumar
Signed-off-by: Rajesh Bhagat
---
Changes in v7:
None
Changes in v6:
Moves IR chip (IR36021) specific code in flag to resolve
compilation issue where it is not present. For example,
LS1088A is having a new LTC3882 voltage chip.
Signed-off-by: Ashish Kumar
Signed-off-by: Rajesh Bhagat
---
Changes in v7:
Adds SERDES voltage and reset SERDES lanes API and makes
enable/disable DDR controller support 0.9V API common.
Signed-off-by: Ashish Kumar
Signed-off-by: Rajesh Bhagat
---
Changes in v7:
- Used APIs clr/set/clrsetbits_le32() fo
Adds a board specific API namely board_adjust_vdd which
is required to define the board VDD adjust settings.
Signed-off-by: Ashish Kumar
Signed-off-by: Rajesh Bhagat
---
Changes in v7:
None
Changes in v6:
Adds LTC3882 voltage regulator chip support in common VID driver.
And adds VID support for LS1088A QDS and RDB platforms.
Rajesh Bhagat (10):
armv8: lsch3: Add serdes and DDR voltage setup
board: common:vid: Add LS1088A VID Supported voltage values
board: common: vid: Add board specific vdd
On Wed, Nov 29, 2017 at 11:46 PM, Stefan Roese wrote:
> This patch changes the calls to uclass_first/next_device() in blk_first/
> next_device() to use uclass_find_first/next_device() instead. These functions
> don't prepare the devices, which is correct in this case.
>
> With this patch applied,
Hi Tom,
The following changes since commit b06c46de632c55f4c39d404c6f0f65e414b31050:
Merge tag 'xilinx-for-v2018.01' of
git://www.denx.de/git/u-boot-microblaze (2017-11-29 08:26:07 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-x86.git
for you to fetch changes up t
On Thu, Nov 30, 2017 at 1:31 PM, Bin Meng wrote:
> On Wed, Nov 29, 2017 at 11:23 PM, Stefan Roese wrote:
>> This patch removes the inclusion of the libgcc math functions and
>> replaces them by functions coded in C, taken from the coreboot
>> project. This makes U-Boot building more independent f
On Thu, Nov 30, 2017 at 1:27 PM, Bin Meng wrote:
> On Sat, Nov 25, 2017 at 5:32 AM, Heinrich Schuchardt
> wrote:
>> Currently X86 does not properly support distro defaults.
>> This patch is only a partial fix.
>>
>> It provides the name of the bootloader EFI application
>> for the X86 architectu
Hello Joe, York,
Any comments on V2 series?
http://patchwork.ozlabs.org/project/uboot/list/?series=13261
Regards
Ashish
From: Ashish Kumar
Sent: Monday, November 13, 2017 3:07 PM
To: u-boot@lists.denx.de
Cc: York Sun; joe.hershber...@ni.com; Ashish Kumar;
On Wed, Nov 29, 2017 at 11:23 PM, Stefan Roese wrote:
> This patch removes the inclusion of the libgcc math functions and
> replaces them by functions coded in C, taken from the coreboot
> project. This makes U-Boot building more independent from the toolchain
> installed / available on the build
On Sat, Nov 25, 2017 at 5:32 AM, Heinrich Schuchardt wrote:
> Currently X86 does not properly support distro defaults.
> This patch is only a partial fix.
>
> It provides the name of the bootloader EFI application
> for the X86 architecture.
>
> The architecture dependent file names are defined in
On 11/28/2017 11:10 PM, Tom Rini wrote:
> On Tue, Nov 28, 2017 at 04:20:39PM +0900, Jaehoon Chung wrote:
>
>> After updating dtc-1.4.5 version, there are too many warning.
>> This patch is to fix about exynos4 series.
>>
>> Signed-off-by: Jaehoon Chung
>
> Have these changes been pushed to the a
> -Original Message-
> From: Wenbin song [mailto:wenbin.s...@nxp.com]
> Sent: Thursday, November 30, 2017 8:27 AM
> To: York Sun ; Prabhakar Kushwaha
> ; Ran Wang ; Mingkai
> Hu ; u-boot@lists.denx.de
> Cc: Wenbin Song
> Subject: [PATCH 2/2] armv8: ls1043a: Discard the needless cpu nodes
This header was renamed to rawnand.h in Linux.
The following is the corresponding commit in Linux.
commit d4092d76a4a4e57b65910899948a83cc8646c5a5
Author: Boris Brezillon
Date: Fri Aug 4 17:29:10 2017 +0200
mtd: nand: Rename nand.h into rawnand.h
We are planning to share mo
The Linux derived log functions can be used anywhere and easily
turned on/off by CONFIG_LOGLEVEL.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/denali_dt.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c
i
Include necessary headers explicitly without relying on indirect
header inclusion.
, are unneeded.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/denali.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index
This is needed for ARCH_DMA_MINALIGN.
Signed-off-by: Masahiro Yamada
---
include/linux/mtd/rawnand.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 192709b..6c3e838 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/
Hi York,
I copied hardware team Kinjalk's explain here.
"Enabling SDHC2 on ‘00’ is not correct on revision D and later boards as the sd
wifi is not on there on these revs.
The IO expander was designed to override the dip switch values. So, the DIP
switch values are driven through low strength d
Hi York,
See my comments inline.
Thanks a lot.
Best regards,
Yangbo Lu
> -Original Message-
> From: York Sun
> Sent: 2017年11月30日 3:43
> To: Y.b. Lu ; u-boot@lists.denx.de
> Subject: Re: [PATCH] armv8: ls1088ardb: support force SDHC mode by
> hwconfig
>
> On 11/26/2017 11:59 PM, Yangbo L
On Mon, Nov 20, 2017 at 03:33:31PM -0700, Simon Glass wrote:
> Add a command which exercises the logging system.
>
> Signed-off-by: Simon Glass
> Reviewed-by: Lukasz Majewski
NAK. With clang-3.8 we see this (and many more):
test/log/log_test.c:35:16: warning: implicit conversion from
enumerat
There are many variants for ls1043a. Modify the detecting way to
make that the below fixup apply to all variants of ls1043a.
- Fix GIC offset for rev1.1
- Fix msi node for rev1.1
- erratum_a010151
Signed-off-by: Wenbin Song
---
arch/arm/cpu/armv8/fsl-layerscape/fdt.c
Using "cpu_pos_mask()" function to detect the real online cpus,
and discard the needless cpu nodes on kernel dft.
Signed-off-by: Wenbin Song
---
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 4
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 32 +++
2 files changed, 3
Update IFC NOR timings to fix that the NOR flash can not
be erased with V4 FPGA image on ls1046aqds.
Signed-off-by: Wenbin Song
---
include/configs/ls1046aqds.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
i
Hi Heinrich,
On Thu, Nov 30, 2017 at 2:46 AM, Heinrich Schuchardt wrote:
>
>
> On 11/29/2017 10:00 AM, Bin Meng wrote:
>>
>> Hi Heinrich,
>>
>> On Fri, Nov 24, 2017 at 4:12 PM, Bin Meng wrote:
>>>
>>> Hi Heinrich,
>>>
>>> On Mon, Nov 20, 2017 at 5:20 PM, Bin Meng wrote:
On Mon, Nov 20
Hi Tom,
Please pull the following patch from u-boot-nds32 into your tree.
Thanks!
The following changes since commit b06c46de632c55f4c39d404c6f0f65e414b31050:
Merge tag 'xilinx-for-v2018.01' of git://www.denx.de/git/u-boot-microblaze
(2017-11-29 08:26:07 -0500)
are available in the git re
Hi Peter,
> -Original Message-
> From: Peter Robinson [mailto:pbrobin...@gmail.com]
> Sent: Wednesday, November 29, 2017 5:27 PM
> To: Peng Fan
> Cc: sba...@denx.de; Fabio Estevam ; u-
> b...@lists.denx.de
> Subject: Re: [U-Boot] [PATCH 00/23] imx: add i.MX8M support and i.MX8MQ
> EVK
>
Typo fix: CONIFG->CONFIG
Signed-off-by: Peng Fan
Cc: Tom Rini
Cc: Simon Glass
---
scripts/Makefile.uncmd_spl | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/Makefile.uncmd_spl b/scripts/Makefile.uncmd_spl
index 15d0836b49..b3994110dc 100644
--- a/scripts/Makefile.un
On 11/29/2017 01:22 AM, Jean-Jacques Hiblot wrote:
> Hi all,
>
>
> On 28/11/2017 13:15, Tom Rini wrote:
>> On Tue, Nov 28, 2017 at 11:20:04AM +0900, Jaehoon Chung wrote:
>>
>>> Dear Tom,
>>>
>>> Could you pull these patches to u-boot/master?
>>> After applied these patches, i will send the patche
On 11/28/2017 09:15 PM, Tom Rini wrote:
> On Tue, Nov 28, 2017 at 11:20:04AM +0900, Jaehoon Chung wrote:
>
>> Dear Tom,
>>
>> Could you pull these patches to u-boot/master?
>> After applied these patches, i will send the patches relevant to fixing
>> patches.
>> - I have tested the buildman, it's
From: Amit Singh Tomar
ARMv8 boards require a struct describing the memory regions for the
mandatory MMU setup.
Add the respective data for the Nexell S5P6818 SoC.
Signed-off-by: Amit Singh Tomar
Signed-off-by: Andre Przywara
---
arch/arm/mach-nexell/Makefile| 1 +
arch/arm/mach-nexell/m
The Nexell S5P6818 SoC uses a UART very similar to those used in the
Samsung S5P SoCs.
Enable the driver in the config and add the necessary glue headers
and clock functions to make the S5P driver happy.
Signed-off-by: Andre Przywara
---
arch/arm/Kconfig | 3 ++
arch/arm/i
The Nexell S5P6818 SoC is an octa-core SoC with ARM Cortex-A53 cores.
The chip contains the usual peripherals for an smartphone/tablet/set-top
box SoC.
Add the .dtsi file describing the peripherals supported so far, but
keep them still disabled.
Signed-off-by: Andre Przywara
---
arch/arm/Kconfig
From: Amit Singh Tomar
Nexell based SoCs (S5P4414 and S5P6818) contain the same timer block as
present on Samsungs SoCs.
Add this timer code when compiling for Nexell SoC and provide the
necessary glue functions to make the Samsung timer driver happy.
Signed-off-by: Amit Singh Tomar
Signed-off
The NanoPi M3 is a single board computer containing a
Nexell S5P6818 SoC (with 8 ARMv8 Cortex-A53 cores).
Add the respective defconfig and a (preliminary) device tree listing
the devices that we support so far.
Signed-off-by: Andre Przywara
---
arch/arm/Kconfig | 6 ++
The vendor provided SPL blob (called "secondboot") runs completely in
AArch32, so expects U-Boot to be AArch32 as well.
Also the lack of a working arch timer limits Linux to 32-bits, as the
mainline arm64 kernel heavily relies on the arch timer.
This commit switches the NanoPiM3 board over to gene
The primary boot loaders provided by the SoC vendor or derived from that
use an image format called "NSIH" to learn the load address and size of
the boot payload. This header occupies 512 bytes, but contains only a
few essential words of information.
Use the boot0 feature to prepend this header bef
The Nexell S5P6818 is a typical SoC with ARM Cortex-A53 cores.
It has many peripherals derived from Samsung SoCs (MMC, serial, I2C,
Ethernet, ...).
Add the required files to introduce this new SoC (family?) to U-Boot.
Signed-off-by: Andre Przywara
---
arch/arm/Kconfig | 6 ++
a
From: Amit Singh Tomar
The Nexell SoCs contain multiple MMC devices, which can be driven by
U-Boot's DesignWare MMC driver, if supported by the required glue driver
file.
Provide that file along with the Makefile/Kconfig changes.
Signed-off-by: Amit Singh Tomar
Signed-off-by: Andre Przywara
--
SYS_ARCH_TIMER guards the usage of the ARM Generic Timer (aka arch
timer) in U-Boot.
At the moment it is mandatory for ARMv8 and used by two ARMv7 boards.
Add a proper Kconfig symbol to express this dependency properly,
allowing certain board configuration to later disable arch timer in case
there
From: Amit Singh Tomar
The simplest and most generic form of a reset controller just exposes
multiple MMIO registers, where each bit toggles a separate reset line.
Add a generic driver to describe this kind of reset controller.
This is used on the Nexell S5P6818, for instance, but also by other
At the moment the serial_s5p driver takes care of both Exynos UARTs
as well as those from older Samsung SoCs (s3c/s5p series).
Looking more closely the only difference between those two groups is
how the fractional baud rate is programmed: via a "divslot" (s3c) or as
a proper fractional value (Exyn
Currently the UART used by some Samsung SoCs is selected by the
generic CONFIG_S5P define. This makes it hard to re-use that UART
without pulling in the whole of the S5P code. Also the Exynos SoCs
use this driver, which is in fact a generic Samsung UART driver.
So create a new Kconfig symbol CONFI
Hi,
this is a first draft of the things Amit and I have been working on in
the last months. It introduces support for an SoC called "Nexell S5P6818".
This is an Octa-core ARMv8 SoC with Cortex-A53 cores, which apparently is
closely related to (older) Samsung SoCs. Many peripherals are compatible
t
On 2017/11/29 11:25, Alan Ott wrote:
The .probe_chip function is supposed to probe an i2c device on the bus to
determine whether a device is answering to a particular address.
at91_i2c_probe_chip() did not do anything resembling this and always
returned 0.
It looks as though at91_i2c_probe_chi
On 2017/11/29 11:25, Alan Ott wrote:
The driver must wait for TXRDY after each byte is pushed into
the i2c FIFO before pushing the next byte. Previously this was
not done for the first byte, causing a race condition with zeros
sometimes being sent for the next byte (which is typically the
first
On 11/29/2017 11:13 AM, Masahiro Yamada wrote:
> This option is no longer used.
>
> Signed-off-by: Masahiro Yamada
Applied both, thanks!
> ---
>
> include/configs/socfpga_common.h | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/include/configs/socfpga_common.h
> b/include/configs/so
On 11/29/2017 04:28 PM, Chris Brandt wrote:
> On Tuesday, November 28, 2017, Marek Vasut wrote:
> So, I can't use wait_for_bit()
Can we somehow extend wait_for_bit() ?
>>>
>>> It's a nice function, so it would be good if it worked with more than
>>> just 32-bit registers.
>>>
>>> Howe
On 11/29/2017 08:49 PM, Chris Brandt wrote:
> It is better to use an existing wait loop implementation.
>
> Signed-off-by: Chris Brandt
Applied, thanks
> ---
> v2:
> * return -ETIMEDOUT instead of -1
> ---
> drivers/usb/host/r8a66597-hcd.c | 13 +
> 1 file changed, 5 insertions(+)
On 11/29/2017 06:59 AM, Heiko Schocher wrote:
> Hello Marek,
>
> Am 29.11.2017 um 03:48 schrieb Marek Vasut:
>> Add driver for the RCar IIC or DVFS I2C controller. This driver is based
>> on the SH I2C driver, but supports DM and DT probing as well as modern
>> I2C framework API.
>>
>> Signed-off-
Hi Maxime,
On 28/11/17 10:34, Maxime Ripard wrote:
> The partitions variable is especially useful to create a partition table
> from U-Boot, either directly from the U-Boot shell, or through flashing
> tools like fastboot and its oem format command.
>
> This is especially useful on devices with a
On 28/11/17 10:34, Maxime Ripard wrote:
> Now that more and more devices are built using eMMC, providing a way to
> easily flash the system without too much hassle seems like a right thing to
> do.
>
> Since fastboot is the most deployed tool to do that these days, we can just
> rely on it to prov
On 28/11/17 10:34, Maxime Ripard wrote:
> The SPL must be located at 8kB (16 sectors) offset. That's right in the
> middle of the GPT, so we need to define a smaller amount of partitions to
> accomodate for that location.
>
> Signed-off-by: Maxime Ripard
The math is correct ;-)
Reviewed-by: And
On 28/11/17 10:34, Maxime Ripard wrote:
> On some SoCs, the SPL needs to be located right in the middle of the GPT
> partition entries.
>
> One way to work around that is to create partition entries for a smaller
> number of partitions to accomodate with where the SPL will be. Create a
> Kconfig o
Hi Wolfgang,
> This is the correct, expected behaviour. "loads" starts an S-Revord
> download over the serial line, so U-Boot is waiting for and readind
> the input which it expects t be in SREC format.
>
> What did you think "loads" would do?
>
It was my fault, sorry for the noise. I was feedin
On Wed, Nov 29, 2017 at 5:49 PM, Chris Brandt wrote:
> It is better to use an existing wait loop implementation.
>
> Signed-off-by: Chris Brandt
> ---
> v2:
> * return -ETIMEDOUT instead of -1
Reviewed-by: Fabio Estevam
___
U-Boot mailing list
U-Boot
Dear Dipanjan,
In message
you wrote:
> I have compiled an older version of u-boot for ARM versatilepb board and
> booted in qemu as: qemu-system-arm -M versatilepb -m 128M -nographic
> -kernel flash.bin
>
> It boots fine, basic commans like `printenv` works. However, issuing
> `loads` makes the
It is better to use an existing wait loop implementation.
Signed-off-by: Chris Brandt
---
v2:
* return -ETIMEDOUT instead of -1
---
drivers/usb/host/r8a66597-hcd.c | 13 +
1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/hos
On Wednesday, November 29, 2017, Fabio Estevam wrote:
> > + if (readw_poll_timeout(r8a66597->reg + DCPCTR, dcpctr,
> > + dcpctr & BSTS, 1000) < 0) {
> > + printf("DCPCTR BSTS timeout!\n");
> > + return -1
On 11/27/2017 12:58 AM, Yangbo Lu wrote:
> For LS1012ARDB RevD and later versions, the I2C reading for DIP
> switch setting had been no longer reliable since the board was
> reworked. This patch is to add hwconfig support to enable/disable
> eSDHC1 manually.
What do you mean "no longer reliable"?
Hi,
On Tue, 2017-11-28 at 22:32 -0800, Dipanjan Das wrote:
>
> The [official source](https://github.com/u-boot/u-boot) doesn't have
> a
> configs/versatilepb_defconfig, hence can't be built for versatilepb.
> Has
> versatilepb board support permanently been dropped in latest u-boot?
>
In case y
On 11/26/2017 11:59 PM, Yangbo Lu wrote:
> The BRDCFG5[SPISDHC] register field of Qixis device is used
> to control SPI and SDHC signal routing.
>
> 10 = Force SDHC Mode
> - SPI_CS[0] is routed to CPLD for SDHC_VS use.
> - SPI_CS[1] is unused.
> - SPI_CS[2:3] are routed to the TDMRiser slot.
On Wed, Nov 29, 2017 at 5:37 PM, Chris Brandt wrote:
> @@ -308,13 +308,10 @@ static int send_setup_packet(struct r8a66597 *r8a66597,
> struct usb_device *dev,
> #if defined(CONFIG_RZA_USB)
> dcpctr = r8a66597_read(r8a66597, DCPCTR);
> if ((dcpctr & PID) == PID_BUF) {
> -
It is better to use an existing wait loop implementation.
Signed-off-by: Chris Brandt
---
drivers/usb/host/r8a66597-hcd.c | 13 +
1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 28d2bc8454..7ae26b33
On 11/23/2017 03:22 AM, Prabhakar Kushwaha wrote:
> The MAC addresses get fixed in the device tree for "ethernet" nodes
> is by using trailing number behind "ethernet" found in "/aliases".
> It may not be necessary for the "ethernet" nodes to be sequential.
> There can be gaps in between or any eth
On 11/08/2017 10:45 PM, Xiaowei Bao wrote:
>
> Hi York,
>
> For the general pcie devices, it will not bring delay, because the RC access
> these
> devices can get the link up state correctly, usually, if the slot have the
> device,
> return the L0 state, if the slot have not device, return DET
On 11/29/2017 10:00 AM, Bin Meng wrote:
Hi Heinrich,
On Fri, Nov 24, 2017 at 4:12 PM, Bin Meng wrote:
Hi Heinrich,
On Mon, Nov 20, 2017 at 5:20 PM, Bin Meng wrote:
On Mon, Nov 20, 2017 at 3:07 PM, Bin Meng wrote:
On Mon, Nov 20, 2017 at 1:30 AM, Heinrich Schuchardt wrote:
Enable CONFI
On Wed, Nov 29, 2017 at 03:29:54PM +0100, Jean-Jacques Hiblot wrote:
> Not all boards have an eMMC and not all users have a need for this.
> Allow to compile it out. By default it is still included.
>
> Signed-off-by: Jean-Jacques Hiblot
Seems good, subject is "eMMMC" however, thanks!
--
Tom
On Tue, Nov 28, 2017 at 10:32:49PM -0800, Dipanjan Das wrote:
> In order to compile u-boot for versatilepb, I had to use [this](
> https://github.com/toyoshim/u-boot) version of u-boot that contains a patch
> for the board with this commit message.:
>
> "Restore ARM versatile platform only for QE
On Wed, Nov 29, 2017 at 03:29:52PM +0100, Jean-Jacques Hiblot wrote:
> Error messages may not be as valued as code space. Allow to compile out
> most of them to free space.
>
> Signed-off-by: Jean-Jacques Hiblot
> ---
> drivers/mmc/Kconfig | 1 +
> drivers/mmc/mmc.c | 44
On 05/15/2017 09:16 AM, york sun wrote:
> From: Ruchika Gupta
>
> Make secure boot validation available without using command.
>
> Signed-off-by: Ruchika Gupta
> Signed-off-by: York Sun
> ---
Due to SPL image size increase, secure boot feature cannot be enabled
together with falcon boot. Defe
The boot device is selected according to BOOT_CFG1[7:4] fuse.
Any value equal or higher then 0x8 is used for nand.
Currently, only values up to 0x8 are handled by the switch.
Add rest of the values up to 0xf to cover all nand cases.
Signed-off-by: Jiri Luznicky
Cc: Stefano Babic
---
arch/arm/i
On 10/05/2017 12:55 AM, Sumit Garg wrote:
>
> I will wait for SD boot patches to be accepted in upstream. As reducing SPL
> size
> for ls1088ardb in upstream does only makes sense once we have base platform
> support merged in upstream.
>
Please rework this patch set.
York
__
On Wed, Nov 29, 2017 at 01:39:05PM +0100, Michal Simek wrote:
> Hi Tom,
>
> please pull these changes to your tree. Travis is not showing any issue
> https://travis-ci.org/michalsimek-test/u-boot/builds/308832565
>
> Changes are described below.
>
> Thanks,
> Michal
>
>
> The following change
Hi Simon,
On 29.11.2017 14:08, Simon Glass wrote:
Hi Stefan,
On 28 November 2017 at 02:40, Stefan Roese wrote:
Hi Bin, Hi Simon,
On 20.11.2017 16:38, Simon Glass wrote:
On 20 November 2017 at 00:07, Bin Meng wrote:
Hi Stefan,
On Wed, Sep 27, 2017 at 1:03 AM, Stefan Roese wrote:
Hi,
Hi Bin,
On 29.11.2017 13:31, Bin Meng wrote:
Hi Stefan,
On Wed, Nov 29, 2017 at 6:01 PM, Stefan Roese wrote:
Hi Bin,
On 29.11.2017 10:23, Bin Meng wrote:
On Wed, Nov 29, 2017 at 4:42 PM, Stefan Roese wrote:
Hi Bin,
On 29.11.2017 09:30, Bin Meng wrote:
I wrote some codes soemthing
On Wed, Nov 29, 2017 at 11:33:09PM +0800, Chen-Yu Tsai wrote:
> On Wed, Nov 29, 2017 at 11:16 PM, Maxime Ripard
> wrote:
> > On Wed, Nov 29, 2017 at 01:14:22PM +0530, Jagan Teki wrote:
> >> Add USB host node, ehci1 and usbphy for bananapi m64
> >>
> >> Signed-off-by: Jagan Teki
> >
> > Acked-by:
This patch changes the calls to uclass_first/next_device() in blk_first/
next_device() to use uclass_find_first/next_device() instead. These functions
don't prepare the devices, which is correct in this case.
With this patch applied, the "usb storage" command now works again as
expected:
=> usb s
On Wed, Nov 29, 2017 at 11:16 PM, Maxime Ripard
wrote:
> On Wed, Nov 29, 2017 at 01:14:22PM +0530, Jagan Teki wrote:
>> Add USB host node, ehci1 and usbphy for bananapi m64
>>
>> Signed-off-by: Jagan Teki
>
> Acked-by: Maxime Ripard
Not to complain, but shouldn't we just sync up with Linux?
Ch
On Tuesday, November 28, 2017, Marek Vasut wrote:
> >>> So, I can't use wait_for_bit()
> >>
> >> Can we somehow extend wait_for_bit() ?
> >
> > It's a nice function, so it would be good if it worked with more than
> > just 32-bit registers.
> >
> > However, it's used in 98 places at the moment, so
This patch removes the inclusion of the libgcc math functions and
replaces them by functions coded in C, taken from the coreboot
project. This makes U-Boot building more independent from the toolchain
installed / available on the build system.
The code taken from coreboot is authored from Vadim Be
On Wed, Nov 29, 2017 at 01:14:22PM +0530, Jagan Teki wrote:
> Add USB host node, ehci1 and usbphy for bananapi m64
>
> Signed-off-by: Jagan Teki
Acked-by: Maxime Ripard
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
signature.asc
Des
On Wed, Nov 29, 2017 at 01:14:23PM +0530, Jagan Teki wrote:
> Order sun50i-h5-orangepi-prime.dts nodes in alphabetic
>
> Signed-off-by: Jagan Teki
Acked-by: Maxime Ripard
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
signature.asc
D
On Wed, Nov 29, 2017 at 07:13:37PM +0530, Jagan Teki wrote:
> On Wed, Nov 29, 2017 at 7:00 PM, Maxime Ripard
> wrote:
> > Hi Jagan,
> >
> > On Wed, Nov 29, 2017 at 01:15:50PM +0530, Jagan Teki wrote:
> >> Add uart2-pins for A64 SOC.
> >>
> >> Signed-off-by: Jagan Teki
> >
> > Usually, we will hav
1 - 100 of 167 matches
Mail list logo
