Hi Vikas
On 01/31/2018 07:20 PM, Vikas Manocha wrote:
> Hi Patrice,
>
> On 01/31/2018 08:09 AM, patrice.chot...@st.com wrote:
>> From: Patrice Chotard
>>
>> This allows to read the CPU ID into STM32 DBGMCU_IDCODE register
>> and create an environment variable which contains the soc name.
>>
>> S
If a bigger EL32 is used, fip.bin can be larger than the currently
assumed boot firmware size. Adjust the update commands.
Signed-off-by: Masahiro Yamada
---
include/configs/uniphier.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/configs/uniphier.h b/includ
I have source of an old version of uboot (2012/07) of this board
(actually 5... ipq806x general and router r7800,d7800 and other 3
model)
Someone can port it to new version or can help me do it? Don't think
it would be difficult as we have all the source that we need. Tell me
if you need more info
For EFI binaries we need special CFLAGS.
They were specified for an object file that since has been replaced.
Signed-off-by: Heinrich Schuchardt
---
Alex, could you, please, forsee this patch for your rc2 pull request.
---
lib/efi_selftest/Makefile | 6 --
1 file changed, 4 insertions(+), 2
With CONFIG_DM_MMC the BananaPi does not detect SD cards.
The sunxi device trees use the cd-inverted property to indicate that
the card detect is inverted.
This property is documented in Linux kernel devicetree/bindings/mmc/mmc.txt
The property is not marked as deprecated.
A similar patch was po
On Thu, Feb 01, 2018 at 08:20:59PM +0300, Alexey Brodkin wrote:
> Now when Blackfin is gone CONFIG_SYS_TEXT_BASE is supposed to be
> set for each and every board which makes checks for this macro being set
> completely redundant.
>
> Note there're still checks for CONFIG_SYS_TEXT_BASE in quite a
Hi Alexey,
On 1 February 2018 at 10:33, Alexey Brodkin wrote:
>
> For some reason we used to print not only location of .text
> section [before relocation] but also .bss start and end.
>
> Moreover how that was printed was obviously misleading:
> ->8---
For some reason we used to print not only location of .text
section [before relocation] but also .bss start and end.
Moreover how that was printed was obviously misleading:
->8---
U-Boot code: 20001000 -> 30008C00 BSS: -> 3000C58E
--
Now when Blackfin is gone CONFIG_SYS_TEXT_BASE is supposed to be
set for each and every board which makes checks for this macro being set
completely redundant.
Note there're still checks for CONFIG_SYS_TEXT_BASE in quite a few board
configurations in "include/configs/XXX.h" which at some point mig
Hi
On 1 Feb. 2018 6:06 pm, "Fabio Estevam" wrote:
[Please do not top post in mailing lists]
On Tue, Jan 30, 2018 at 6:40 AM, Mehmet Ali İPİN
wrote:
> Dear Estevam,
>
> I used GPIO 16 to generate the 25MHZ clock, using
enable_fec_anatop_clock(1,ENET_25MHZ), in ;
> board_eth_init() function, b
[Please do not top post in mailing lists]
On Tue, Jan 30, 2018 at 6:40 AM, Mehmet Ali İPİN
wrote:
> Dear Estevam,
>
> I used GPIO 16 to generate the 25MHZ clock, using
> enable_fec_anatop_clock(1,ENET_25MHZ), in ;
> board_eth_init() function, but got 50 MHz on GPIO_16;
>
> When I manually set th
I'm looking at u-boot source code, and see a huge amount of hardware
drivers, used only for the loader.
On the other side, modern Linux kernels eat a more than half of RAM on
cheap embedded modules like HLK-R04.
Linux kernels have got fat. I believe it would be easier to remove modules,
and avoid
Dear Dmitry,
In message
you wrote:
>
> I'm looking at u-boot source code, and see a huge amount of hardware
> drivers, used only for the loader.
> On the other side, modern Linux kernels eat a more than half of RAM on
> cheap embedded modules like HLK-R04.
>
> Is it suitable to morph u-boot in
On 02/01/2018 04:11 PM, Tuomas Tynkkynen wrote:
Hi Heinrich,
On Wed, 2018-01-31 at 18:08 +0100, Heinrich Schuchardt wrote:
On 07/04/2017 09:31 PM, Simon Glass wrote:
Add a driver-model version of this driver which mostly uses the
existing
code. The old code can be removed once all boards are
Hi Heinrich,
On Wed, 2018-01-31 at 18:08 +0100, Heinrich Schuchardt wrote:
> On 07/04/2017 09:31 PM, Simon Glass wrote:
> > Add a driver-model version of this driver which mostly uses the
> > existing
> > code. The old code can be removed once all boards are switched
> > over.
> >
> > Signed-off-
On 01/30/2018 09:15 AM, Stefan Mavrodiev wrote:
On 01/22/2018 10:36 AM, Jagan Teki wrote:
On Tue, Jan 2, 2018 at 4:31 PM, Stefan Mavrodiev
wrote:
On 12/26/2017 11:47 AM, Jagan Teki wrote:
On Fri, Dec 22, 2017 at 3:30 PM, Stefan Mavrodiev
wrote:
Driver testing is done with A20-OLinuXino-Lime
On Tue, Jan 30, 2018 at 10:08:50AM +0100, Lukasz Majewski wrote:
> Hi Maxime,
>
> > Hi,
> >
> > On Mon, Jan 29, 2018 at 07:25:54PM +0100, Lukasz Majewski wrote:
> > > This commit moves USB_FUNCTION_MASS_STORAGE config to Kconfig.
> > >
> > > Signed-off-by: Lukasz Majewski
> > > ---
> > >
> > >
Hi Marek,
On Wed, 2018-01-31 at 16:13 +0100, Marek Vasut wrote:
> On 01/31/2018 03:56 PM, Alexey Brodkin wrote:
> > For some reason from day one we used to have both CONFIG_DWC2_UTMI_WIDTH
> > mentioned in dwc2.h and in scripts/config_whitelist.txt but never really
> > used
> > and CONFIG_DWC2_UT
On Thu, Feb 1, 2018 at 8:08 PM, Stefan Mavrodiev
wrote:
> On 01/30/2018 09:15 AM, Stefan Mavrodiev wrote:
>>
>> On 01/22/2018 10:36 AM, Jagan Teki wrote:
>>>
>>> On Tue, Jan 2, 2018 at 4:31 PM, Stefan Mavrodiev
>>> wrote:
On 12/26/2017 11:47 AM, Jagan Teki wrote:
>
> On Fri, Dec
Hi,
On Thu, Feb 01, 2018 at 12:12:46PM +0200, Stefan Mavrodiev wrote:
> This is new System-On-Module platform with universal dimm socket for
> easy insertation. The EVB board is designed to be universal with
> future modules. Product page is located here [1].
>
> Base features of A20-SOM204 board
Hi,
On Thu, Feb 01, 2018 at 12:12:45PM +0200, Stefan Mavrodiev wrote:
> By default PHY address used for sunxi boards is 1. Some new boards
> (A20-SOM204-EVB) uses different address.
>
> The code enables selective PHY address via menuconfig inside ARM
> submenu. The option has default value of 1.
On 1 February 2018 at 05:26, Michal Simek wrote:
> On 31.1.2018 22:25, Ezequiel Garcia wrote:
>> On 26 January 2018 at 09:33, Michal Simek wrote:
>>> Hi,
>>>
>>>
>>> On 17.1.2018 14:56, Ezequiel Garcia wrote:
This commit adds CPU and silicon version information
consuming the SLCR IDCODE
On Wed, Jan 31, 2018 at 02:47:13PM +0100, Simon Goldschmidt wrote:
> For the redundant environment configuration, env_sf_load still
> contained duplicate code instead of using env_import_redund().
>
> Simplify the code by only executing the load twice and delegating
> everything else to env_impor
On Wed, Jan 31, 2018 at 02:47:12PM +0100, Simon Goldschmidt wrote:
> For multiple env drivers to correctly implement fallback when
> one environment fails to load (e.g. crc error), the return value
> of env_import has to be propagated by all env driver's load
> function.
>
> Without this change,
On Wed, Jan 31, 2018 at 02:47:10PM +0100, Simon Goldschmidt wrote:
> env_import (and env_import_redund) currently return 1 on success
> and 0 on error. However, they are only used from functions
> returning 0 on success or a negative value on error.
>
> Let's clean this up by making env_import an
On Wed, Jan 31, 2018 at 02:47:11PM +0100, Simon Goldschmidt wrote:
> There is more common code in mmc, nand and ubi env drivers that
> can be shared by moving to env_import_redund.
>
> For this, a status/error value whether the buffers were loaded
> are passed as additional parameters to env_impo
On Wed, Jan 31, 2018 at 07:56:48AM +0100, Simon Goldschmidt wrote:
> env_get_f calls env_get_char to load single characters from the
> environment. However, the return value of env_get_char was not
> checked for errors. Now if the env driver does not support the
> .get_char call, env_get_f did not
On Wed, Jan 31, 2018 at 11:04:00PM +, York Sun wrote:
> Tom,
>
> The following changes since commit ae5326a6b34b34b1827edf2eee1a0e9e5363c5a2:
>
> serial: Make full device search optional (2018-01-29 08:18:02 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boo
Find out MDIO bus and enable MDIO access to it if this is done via
different controller.
Signed-off-by: Michal Simek
---
Hi Joe,
this is the code I have hacked a year ago for ZynqMP where we can have
configuration that 4 gems are enabled but they share the same MDIO bus
which can be assigned to
Change the return type of efi_driver_init() to efi_status_t.
efi_driver_init() calls efi_add_driver() which returns an efi_status_t
value. efi_driver_init() should not subject this value to a conversion to
int losing high bits on 64bit systems.
Signed-off-by: Heinrich Schuchardt
---
include/efi
Good Day
I'm looking at u-boot source code, and see a huge amount of hardware
drivers, used only for the loader.
On the other side, modern Linux kernels eat a more than half of RAM on
cheap embedded modules like HLK-R04.
Is it suitable to morph u-boot into tiny embedded microkernel OS adding
mult
A20-SOM204 board has option with onboard 16GB eMMC. The chip is wired
to MMC2 slot.
This patch adds defconfig and dts files for this board. The dts is same
with mainline kernel.
Signed-off-by: Stefan Mavrodiev
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/sun7i-a20-
This is new System-On-Module platform with universal dimm socket for
easy insertation. The EVB board is designed to be universal with
future modules. Product page is located here [1].
Base features of A20-SOM204 board includes:
* 1GB DDR3 RAM
* AXP209 PMU
* KSZ9031 Gigabit
By default PHY address used for sunxi boards is 1. Some new boards
(A20-SOM204-EVB) uses different address.
The code enables selective PHY address via menuconfig inside ARM
submenu. The option has default value of 1.
Signed-off-by: Stefan Mavrodiev
---
arch/arm/mach-sunxi/Kconfig| 9 +++
On 23.01.2018 21:17, Maxime Ripard wrote:
Now that we have everything in place in the code, let's allow to build
multiple environments backend through Kconfig.
Reviewed-by: Andre Przywara
Reviewed-by: Lukasz Majewski
Reviewed-by: Simon Glass
Signed-off-by: Maxime Ripard
I get a build error
Hi,
On 01/02/18 08:26, Maxime Ripard wrote:
> Hi Andre,
>
> On Wed, Jan 31, 2018 at 01:40:23PM +, Andre Przywara wrote:
>>> Is this issue happening when you sync the whole DT, and would it break
>>> if you just convert the EMAC binding?
>>>
>>> Otherwise, we might try to revive the DTC garbag
On 02/01/2018 08:06 AM, Chee, Tien Fong wrote:
> On Tue, 2018-01-30 at 13:12 +0100, Marek Vasut wrote:
>> On 01/30/2018 12:16 PM, tien.fong.c...@intel.com wrote:
>>>
>>> From: Tien Fong Chee
>>>
>>> This is file system generic loader which can be used to load
>>> the file image from the storage in
On 01.02.2018 00:00, York Sun wrote:
On 01/30/2018 10:57 PM, Simon Goldschmidt wrote:
env_get_f calls env_get_char to load single characters from the
environment. However, the return value of env_get_char was not
checked for errors. Now if the env driver does not support the
.get_char call, env_
Use zynqmp clock driver instead of fixed clocks.
Signed-off-by: Michal Simek
---
arch/arm/dts/zynqmp-clk-ccf.dtsi | 290 +++
arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 2 +-
arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts | 2 +-
arch/arm/dts/zyn
On 01.02.2018 09:05, Michal Simek wrote:
Check !desc earlier to simplify code.
Signed-off-by: Michal Simek
Acked-by: Simon Goldschmidt
Reviewed-by: Simon Goldschmidt
---
drivers/fpga/fpga.c | 21 +++--
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/dri
Hi Andre,
On Wed, Jan 31, 2018 at 01:40:23PM +, Andre Przywara wrote:
> > Is this issue happening when you sync the whole DT, and would it break
> > if you just convert the EMAC binding?
> >
> > Otherwise, we might try to revive the DTC garbage collection of unused
> > nodes patches. This wou
On 31.1.2018 22:25, Ezequiel Garcia wrote:
> On 26 January 2018 at 09:33, Michal Simek wrote:
>> Hi,
>>
>>
>> On 17.1.2018 14:56, Ezequiel Garcia wrote:
>>> This commit adds CPU and silicon version information
>>> consuming the SLCR IDCODE and DEVCFG MCTRL registers,
>>> respectively.
>>>
>>> Sign
Now that showing silicon version is part of the CPU
info display, let's remove checkboard().
Note that the generic show_board_info() will still
show the DT 'model' property. For instance:
U-Boot 2018.01-00172-g5e296ab7317a (Jan 17 2018 - 09:57:36 -0300)
CPU: Zynq 7z010
Silicon: v3.1
Mo
This commit moves the FPGA descriptor definition
to mach-zynq, where it makes more sense.
Based on patches from Ariel D'Alessandro ,
and Ezequiel Garcia
Signed-off-by: Michal Simek
---
It is just test how this can be done. Didn't spent enought time to
prepare it to the state that it is fine to
Check !desc earlier to simplify code.
Signed-off-by: Michal Simek
---
drivers/fpga/fpga.c | 21 +++--
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/fpga/fpga.c b/drivers/fpga/fpga.c
index 6aead27f1626..ac01612d7518 100644
--- a/drivers/fpga/fpga.c
+++ b
45 matches
Mail list logo