Hi Anatolij
On 03/05/2018 11:51 PM, Anatolij Gustschin wrote:
> On Fri, 2 Mar 2018 16:44:01 +0100
> yannick fertre yannick.fer...@st.com wrote:
>
>> Version 2:
>> - Replace debug log by pr_error, pr_warn or pr_info.
>> - Rework bridge between ltdc & dsi panel
>> - Rework backligh management (with
Hi Vignesh,
On Mon, Mar 5, 2018 at 7:27 PM, Vignesh R wrote:
> DWC3 USB3 controllers will need USB3 PHY to be enabled, in addition to
> USB2 PHY, to be functional. Therefore enable USB3 PHY when available.
>
> Signed-off-by: Vignesh R
> ---
> drivers/usb/host/xhci-dwc3.c | 35 ++
On Mon, Mar 5, 2018 at 7:27 PM, Vignesh R wrote:
> It is wrong that expect phy init to also power on the PHY. Therefore,
> explicitly, call generic_phy_power_on() after generic_phy_power_init() in
> order to power on PHY before using it.
>
> Signed-off-by: Vignesh R
> ---
> drivers/usb/host/xhci
From: Mario Six
The @gdsys.cc addresses are supposed to be used for mailing lists.
Switch all occurrences of @gdsys.de mail addresses to their @gdsys.cc
equivalent.
Also, Dirk's address was wrong in one place; fix that as well.
Signed-off-by: Mario Six
---
board/gdsys/a38x/MAINTAINERS| 4
Commit 286ede6 ("drivers: core: Add translation in live tree case") made
dev_get_addr always use proper bus translations for addresses read from
the device tree. But this leads to problems with certain busses, e.g.
I2C busses, which run into an error during translation, and hence stop
working.
It
On Wed, Feb 28, 2018 at 3:12 PM, Prabhakar Kushwaha
wrote:
> [Resending on correct patch of the patch-set]
>
> Dear Jagan,
>
>
>> -Original Message-
>> From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Jagan
>> Teki
>> Sent: Thursday, December 28, 2017 11:42 AM
>> To: u-boot@
Dear Jagan,
> -Original Message-
> From: Boris Brezillon [mailto:boris.brezil...@bootlin.com]
> Sent: Wednesday, February 28, 2018 5:40 PM
> To: Prabhakar Kushwaha ; Jagan Teki
> ; Cyrille Pitchen
>
> Cc: u-boot@lists.denx.de; Suresh Gupta ; Yogesh
> Narayan Gaur ; Poonam Aggrwal
> ; Ash
Hi,
Do you have any comments?
On 2/9/2018 11:34 AM, Wenyou Yang wrote:
In order to provide the clocks UHP48MHz and UHP12MHz to the USB
Host OHCI, add the USB clock and PLLADIV clock driver.
Wenyou Yang (3):
clk: at91: add USB Host clock driver
clk: at91: add PLLADIV driver
clk: at91
Hi,
On Mon, Mar 05, 2018 at 05:29:08PM +0100, Jean-Jacques Hiblot wrote:
>Hi Peng,
>
>I'm glad you are adding HS400 support. Thanks.
>
>
>On 05/03/2018 10:11, Peng Fan wrote:
>>Add HS400 support.
>>Selecting HS400 needs first select HS199 according to spec, so use
>>a dedicated function for HS400.
Hey all,
It's release day and I've released v2018.03-rc4. I've included a few
different regression fixes I've seen along with some fixes and cleanups.
I would like to do the release on March 12th, and likely will so long as
no big regressions show up. I am worried about the RPi3 issue I've seen
On Mon, Mar 05, 2018 at 09:33:12PM +0100, Marek Vasut wrote:
> Hi,
>
> below is the final PR for 2018.03 from me. It adds R8A77965 M3N and a
> matching board. All that are mostly various IDs, since on this level the
> SoC is ~compatible with 7796 . There are two critical fixes though, the
> PFC o
Hi Patrick,
On 03/05/2018 06:24 AM, Patrick Delaunay wrote:
>
> This patch-set adds initial support of STMicroelectronics STM32MP157
> microprocessor (MPU)
> - add new arm arch stm32mp1 (based on armv7)
> - support for stm32mp157 SOC (based on Cortex-A7)
> - add minimal support for board evaluati
Hi,
On Mon, 5 Mar 2018 14:08:20 -0600
Adam Ford wrote:
...
>
> What I was hoping to do was help clean the whitelist table by first
> searching for #defines that are never used anywhere and/or are dead.I
> will be the first person to admit that I am not very good with shell
> scripts, so I thoug
The following config symbols are only defined once and never referenced
anywhere else:
CONFIG_AT91SAM9263EK
CONFIG_AT91SAM9RLEK
CONFIG_BARIX_IPAM390
CONFIG_BOARD_H2200
CONFIG_EP9301
CONFIG_KZM_A9_GT
CONFIG_PICOSAM
CONFIG_PLATINUM_PICON
CONFIG_PLATINUM_TITANIUM
CONFIG_PM9261
CONFIG_PM9263
CONFIG_PM
The following config symbols are only defined once and never referenced
anywhere else:
CONFIG_DBAU1X00
CONFIG_PB1X00
Most of them are config symbols named after the respective boards which
seems to have been a standard practice at some point.
Signed-off-by: Tuomas Tynkkynen
---
include/configs
The following config symbols are only defined once and never referenced
anywhere else:
CONFIG_ARM926EJS
CONFIG_CPUAT91
CONFIG_EXYNOS5800
CONFIG_SYS_CORTEX_R4
Most of them are config symbols named after the respective SoCs which
seems to have been a standard practice at some point.
Signed-off-by:
On Fri, 2 Mar 2018 16:44:01 +0100
yannick fertre yannick.fer...@st.com wrote:
> Version 2:
> - Replace debug log by pr_error, pr_warn or pr_info.
> - Rework bridge between ltdc & dsi panel
> - Rework backligh management (with or witout gpio)
> - Rework panel otm8009a
> - Add new panel raydium rm68
On Fri, 2 Mar 2018 15:59:20 +0100
yannick fertre yannick.fer...@st.com wrote:
> Version 2:
> - Add patch to display bitmap stmicroelectronics_uboot_logo_8bit_rle
> - Add patch to defconfig to add splash screen
> - Rename panel in dts.
>
> Version 1:
> - Initial commit
>
> This serie contains all
Because someone was wondering what the usb speed was in linux. My
kernel is based on 3.2. Note I have USB DMA disabled so that doesn't
help the speed. Not sure if u-boot is using DMA but I'd guess not.
ADB over usb
$ time adb -s 16019491 push userdata.img /mnt/obb/
userdata.img: 1 file pushed. 3
I changed fdt_high but got the same result.
I wrote my device tree, added it into the makefile and copy the
sama5d2.config with my board name. I also got rid of all the unnecessary
stuff.
I'm now using the correct .dtb file (in arch/arm/boot/dts/)
My device tree stdout-path does point into my flexc
CONFIG_SYS_CBSIZE determines the maximum length of the kernel command
line, and the default value of 256 is too small for booting some Linux
images in the wild.
Signed-off-by: Tuomas Tynkkynen
--
Hoping to get this in 2018.03.
---
include/configs/qemu-arm.h | 2 ++
1 file changed, 2 insertions(+
Hi,
I was playing around with qemu_arm and qemu_arm64 and noticed some images
using the distro bootcmd infrastructure failed to boot there due to the buffer
for kernel command line arguments (which is determined by CONFIG_SYS_CBSIZE)
was too small. I found this odd given the images worked on some
There are several items in the whitelist which don't appear to be
used anywhere outside of the whitelist itself. These include:
CONFIG_IMX_NAND
CONFIG_MXS_AUART
CONFIG_MXS_AUART_BASE
CONFIG_NORFLASH_PS32BIT
CONFIG_QSPI
CONFIG_REV3
CONFIG_SIMU
CONFIG_STV0991
CONFIG_SYS_MEMORY_TOP
CONFIG_SYS_SERIAL
On Sat, Mar 3, 2018 at 11:43 AM, Calvin Johnson wrote:
> Add configurations for PFE.
>
> Signed-off-by: Calvin Johnson
> Signed-off-by: Anjaneyulu Jagarlmudi
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de
On Sat, Mar 3, 2018 at 11:43 AM, Calvin Johnson wrote:
> SoC specific PFE macros are defined and structure ccsr_scfg
> is updated with members defined for PFE.
>
> Signed-off-by: Calvin Johnson
> Signed-off-by: Anjaneyulu Jagarlmudi
Acked-by: Joe Hershberger
___
On Sat, Mar 3, 2018 at 11:43 AM, Calvin Johnson wrote:
> This patch enables ethernet support for ls1012a2g5rdb.
>
> Signed-off-by: Calvin Johnson
> Signed-off-by: Bhaskar Upadhaya
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
On Mon, Mar 5, 2018 at 6:00 PM, Jonathan Cormer
wrote:
> On Sat, 2018-03-03 at 12:00 +, u-boot-requ...@lists.denx.de wrote:
>>
>> On 1 March 2018 at 16:33, Tom Rini wrote:
>> >
>> > On Thu, Mar 01, 2018 at 04:10:44PM +0200, Ruslan Bilovol wrote:
>> > >
>> > > Hi Lukasz,
>> > >
>> > > On Thu,
Hi,
below is the final PR for 2018.03 from me. It adds R8A77965 M3N and a
matching board. All that are mostly various IDs, since on this level the
SoC is ~compatible with 7796 . There are two critical fixes though, the
PFC one and the PHY reset GPIO.
btw it'd be nice if the release didn't overlap
On Sat, Mar 3, 2018 at 11:43 AM, Calvin Johnson wrote:
> This patch enables ethernet support for ls1012aqds.
>
> Signed-off-by: Calvin Johnson
> Signed-off-by: Anjaneyulu Jagarlmudi
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.
On Sat, Mar 3, 2018 at 11:43 AM, Calvin Johnson wrote:
> Contains all the pfe header files.
>
> Signed-off-by: Calvin Johnson
> Signed-off-by: Anjaneyulu Jagarlmudi
>
> ---
>
> Changes in v3:
> -Move pfe_eth header files to include/net/pfe_eth
> -Use BIT macro wherever applicable
>
> Changes in
I went through my boards to look for junk #defines in the header that
do nothing and/or are dead.
I then created a pretty poor script that runs through and scans the
whitelist and greps the code searching for C code that uses the
defines.
I started isolating sections and found that in some places
Signed-off-by: Álvaro Fernández Rojas
---
v5: no changes
v4: no changes
v3: no changes
v2: no changes
arch/mips/dts/brcm,bcm6348.dtsi | 26 ++
1 file changed, 26 insertions(+)
diff --git a/arch/mips/dts/brcm,bcm6348.dtsi b/arch/mips/dts/brcm,bcm6348.dtsi
index d774c5
Hi Grygorii,
Thanks for reporting that, it should be fixed on v5.
Regards,
Álvaro.
El 05/03/2018 a las 20:35, Grygorii Strashko escribió:
On 02/22/2018 10:18 AM, Simon Glass wrote:
On 21 February 2018 at 09:10, Álvaro Fernández Rojas wrote:
Move dma_ops to a separate header file, followi
Signed-off-by: Álvaro Fernández Rojas
---
v5: no changes
v4: no changes
v3: no changes
v2: no changes
arch/mips/dts/comtrend,ct-5361.dts| 12
configs/comtrend_ct5361_ram_defconfig | 8 +++-
2 files changed, 19 insertions(+), 1 deletion(-)
diff --git a/arch/mips/dts/com
Signed-off-by: Álvaro Fernández Rojas
---
v5: no changes
v4: no changes
v3: no changes
v2: no changes
arch/mips/dts/sagem,f...@st1704.dts | 12
configs/sagem_f@st1704_ram_defconfig | 9 -
2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/arch/mips/dts/s
Signed-off-by: Álvaro Fernández Rojas
---
v5: no changes
v4: no changes
v3: no changes
v2: no changes
arch/mips/dts/huawei,hg556a.dts | 12
configs/huawei_hg556a_ram_defconfig | 8 +++-
2 files changed, 19 insertions(+), 1 deletion(-)
diff --git a/arch/mips/dts/huawei,
Signed-off-by: Álvaro Fernández Rojas
---
v5: no changes
v4: no changes
v3: no changes
v2: no changes
arch/mips/dts/brcm,bcm6358.dtsi | 28
1 file changed, 28 insertions(+)
diff --git a/arch/mips/dts/brcm,bcm6358.dtsi b/arch/mips/dts/brcm,bcm6358.dtsi
index 1468
Signed-off-by: Álvaro Fernández Rojas
---
v5: no changes
v4: no changes
v3: no changes
v2: no changes
arch/mips/dts/brcm,bcm6338.dtsi | 15 +++
1 file changed, 15 insertions(+)
diff --git a/arch/mips/dts/brcm,bcm6338.dtsi b/arch/mips/dts/brcm,bcm6338.dtsi
index 4125f71d9f..62127
Signed-off-by: Álvaro Fernández Rojas
---
v5: no changes
v4: no changes
v3: no changes
v2: no changes
arch/mips/dts/brcm,bcm6348.dtsi | 16
include/dt-bindings/dma/bcm6348-dma.h | 17 +
2 files changed, 33 insertions(+)
create mode 100644 include/dt-bi
Signed-off-by: Álvaro Fernández Rojas
---
v5: Receive as much packets as possible from bcm6348-eth and cache them in
net_rx_packets. This is needed in order to fix flow control issues.
v4: Fix issues reported by Grygorii Strashko and other fixes:
- Copy received dma buffer to net_rx_packets i
Signed-off-by: Álvaro Fernández Rojas
---
v5: no changes
v4: no changes
v3: no changes
v2: no changes
arch/mips/dts/sfr,nb4-ser.dts | 24
configs/sfr_nb4-ser_ram_defconfig | 8 +++-
2 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/arch/mips/dts
BCM6348 IUDMA controller is present on multiple BMIPS (BCM63xx) SoCs.
Signed-off-by: Álvaro Fernández Rojas
---
v5: Several fixes and improvements:
- Remove unused defines.
- Increment rx descriptors.
- Fix flow control issues.
- Error checking now depends on hw.
- Remove unneeded inte
Signed-off-by: Álvaro Fernández Rojas
---
v5: no changes
v4: no changes
v3: no changes
v2: no changes
include/phy.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/phy.h b/include/phy.h
index 0543ec10c2..8f3e53db01 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -50,6 +50,7 @
Signed-off-by: Álvaro Fernández Rojas
---
v5: no changes
v4: no changes
v3: no changes
v2: no changes
arch/mips/dts/brcm,bcm6358.dtsi | 18 ++
include/dt-bindings/dma/bcm6358-dma.h | 17 +
2 files changed, 35 insertions(+)
create mode 100644 include/dt-
Signed-off-by: Álvaro Fernández Rojas
---
v5: no changes
v4: no changes
v3: no changes
v2: no changes
arch/mips/dts/brcm,bcm6338.dtsi | 14 ++
include/dt-bindings/dma/bcm6338-dma.h | 15 +++
2 files changed, 29 insertions(+)
create mode 100644 include/dt-bindin
This adds channels support for dma controllers that have multiple channels
which can transfer data to/from different devices (enet, usb...).
Signed-off-by: Álvaro Fernández Rojas
Reviewed-by: Simon Glass
---
v5: remove unneeded dma.h include
v4: no changes
v3: Introduce changes reported by Si
Move dma_ops to a separate header file, following other uclass implementations.
While doing so, this patch also improves dma_ops documentation.
Signed-off-by: Álvaro Fernández Rojas
Reviewed-by: Simon Glass
---
v5: fix build of ti-edma3 (reported by Grygorii Strashko) and remove unneeded
dma.h
In order to add bcm6348-enet support, dma-uclass must be extended to support
dma channels and reworked to operate like the other dm uclass (clk, reset...).
v5: Fix issues reported by Grygorii Strashko and other fixes:
- Fix build of ti-edma3.
- Remove unused bcm6348-iudma defines.
- Increment b
Hi
On 03/03/2018 02:59 AM, Álvaro Fernández Rojas wrote:
> Move dma_ops to a separate header file, following other uclass
> implementations.
> While doing so, this patch also improves dma_ops documentation.
>
> Signed-off-by: Álvaro Fernández Rojas
> Reviewed-by: Simon Glass
> ---
> v4: no c
On 02/22/2018 10:18 AM, Simon Glass wrote:
> On 21 February 2018 at 09:10, Álvaro Fernández Rojas
> wrote:
>> Move dma_ops to a separate header file, following other uclass
>> implementations.
>> While doing so, this patch also improves dma_ops documentation.
>>
>> Signed-off-by: Álvaro Fernán
On 03/05/2018 07:54 PM, Tom Rini wrote:
> On Sun, Mar 04, 2018 at 07:17:52PM +0100, Marek Vasut wrote:
>
>> From: Ed Bartosh
>>
>> Enable DHCP support for this board.
>>
>> Signed-off-by: Ed Bartosh
>> Signed-off-by: Marek Vasut
>> Signed-off-by: Tom Rini
>
> Applied to u-boot/master, thanks!
Hi Mario,
https://patchwork.ozlabs.org/patch/860805/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
On Mon, Mar 05, 2018 at 08:15:51AM +0100, Heinrich Schuchardt wrote:
> POWER should be after ONENAND
>
> Signed-off-by: Heinrich Schuchardt
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Boot mailing list
U
Hi Bernhard,
https://patchwork.ozlabs.org/patch/873696/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Arno,
https://patchwork.ozlabs.org/patch/865881/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Eugeniy,
https://patchwork.ozlabs.org/patch/869785/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
On Mon, Mar 05, 2018 at 04:16:33AM -0600, Adam Ford wrote:
> This should clean up a warning about a missing phy-cells
>
> Signed-off-by: Adam Ford
>
> diff --git a/arch/arm/dts/logicpd-som-lv.dtsi
> b/arch/arm/dts/logicpd-som-lv.dtsi
> index 46dae55..c1aa7a4 100644
Applied to u-boot/master, t
On Sun, Mar 04, 2018 at 03:05:38PM -0600, Adam Ford wrote:
> Due to evolution of the MMC driver and better support, let's
> remove unnecessary undefs.
>
> Signed-off-by: Adam Ford
>
> diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
> index 6414383..7ffc4f7 100644
App
On Mon, Feb 12, 2018 at 05:56:37PM -0500, Jeremy Boone wrote:
> From: Jeremy Boone
>
> Ensure that the Atmel TPM driver performs sufficient
> validation of the length returned in the TPM response header.
> This patch prevents memory corruption if the header contains a
> length value that is larg
On Mon, Mar 05, 2018 at 10:21:19AM -0500, Tom Rini wrote:
> This was missing the 'S' line causing a warning from genboardscfg.py
>
> Signed-off-by: Tom Rini
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Bo
On Sun, Mar 04, 2018 at 10:55:19PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam
>
> Keep spelling.txt in sync with the version from kernel 4.16-rc4.
>
> Signed-off-by: Fabio Estevam
> Reviewed-by: Heinrich Schuchardt
Applied to u-boot/master, thanks!
And funny enough, checkpatch.pl com
On Thu, Mar 01, 2018 at 02:45:04PM +0100, Mario Six wrote:
> The PCA953x driver uses "gpio@%x_" as the GPIO bank name, where "%x" is
> instantiated with the I2C address of the chip. While this works, it
> becomes very confusing if a board has multiple PCAs with the same
> address on different I2C
On Fri, Feb 16, 2018 at 09:17:44PM +0530, Faiz Abbas wrote:
> Rename CONFIG_SPL_USBETH_SUPPORT to CONFIG_SPL_USB_ETHER.
>
> This enables users to block text using CONFIG_IS_ENABLED() instead
> of resorting to #if ladders with SPL and non-SPL cases.
>
> Signed-off-by: Faiz Abbas
Applied to u-bo
On Sun, Mar 04, 2018 at 02:54:15PM -0600, Adam Ford wrote:
> With the migration to Kconfig, the I2C block no longer exists in here.
> Let's clean up the comment.
>
> Signed-off-by: Adam Ford
>
> diff --git a/include/configs/ti_armv7_omap.h b/include/configs/ti_armv7_omap.h
> index 80d4476..9da6
On Fri, Mar 02, 2018 at 09:11:35PM +0100, Heinrich Schuchardt wrote:
> Add a comment indicating that the German key map assumes code page 437.
>
> Add support for character ² (square sign) in the German key map.
>
> Signed-off-by: Heinrich Schuchardt
Applied to u-boot/master, thanks!
--
Tom
On Mon, Feb 12, 2018 at 05:56:35PM -0500, Jeremy Boone wrote:
> From: Jeremy Boone
>
> This patch prevents integer underflow when the length was too small,
> which could lead to memory corruption.
>
> Signed-off-by: Jeremy Boone
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Descr
On Fri, Mar 02, 2018 at 09:56:00AM +0100, Marek Behún wrote:
> Signed-off-by: Marek Behun
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/
On Sun, Mar 04, 2018 at 07:17:52PM +0100, Marek Vasut wrote:
> From: Ed Bartosh
>
> Enable DHCP support for this board.
>
> Signed-off-by: Ed Bartosh
> Signed-off-by: Marek Vasut
> Signed-off-by: Tom Rini
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Thu, Mar 01, 2018 at 02:06:32PM +0100, Stefan Agner wrote:
> From: Stefan Agner
>
> Treat the first equal sign as a key/value separation too. This makes
> the script files compatible with mkenvimage input file format. It
> won't support variables with equal signs anymore, but this seems not
>
On Mon, Mar 05, 2018 at 01:20:11AM +0900, Masahiro Yamada wrote:
> Thomas reported U-Boot failed to build host tools if libfdt-devel
> package is installed because tools include libfdt headers from
> /usr/include/ instead of using internal ones.
>
> This commit moves the header code:
> include/
On Mon, Feb 12, 2018 at 05:56:36PM -0500, Jeremy Boone wrote:
> From: Jeremy Boone
>
> Ensure that the Infineon I2C and SPI TPM driver performs adequate
> validation of the length extracted from the TPM response header.
> This patch prevents integer underflow when the length was too small,
> whi
On Fri, Mar 02, 2018 at 11:13:42PM +0100, Paul Kocialkowski wrote:
> There are no headers for libfdt in lib/libfdt, as they are instead
> located in scripts/dtc/libfdt. Specifying lib/libfdt for headers
> inclusion in host tools results in using the system libfdt headers,
> which is not what we wa
Hi Mario,
https://patchwork.ozlabs.org/patch/860804/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Mario,
https://patchwork.ozlabs.org/patch/860794/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Mario,
https://patchwork.ozlabs.org/patch/860763/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
>>> Hi!
>>> I'm trying to boot from u-boot on a Raspberry Pi 3. But for some reason
>>> it
>>> isn't autobooting on the SD-card.
>>>
>>> Is it possible to get more debug output on the screen console? I don't
>>> have
>>> a serial console at the moment.
>>> The output on the screen is:
>>>
>>> Net:
Hi Mario,
https://patchwork.ozlabs.org/patch/860790/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Mario,
https://patchwork.ozlabs.org/patch/860801/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hi Mario,
https://patchwork.ozlabs.org/patch/860795/ was applied to
http://git.denx.de/?p=u-boot/u-boot-net.git
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Dear Dmitry,
In message <1520258115-29823-1-git-send-email-dun...@tecon.ru> you wrote:
> From: Dmitry Dunaev
>
> ---
It would be appropriate to provide an explantion of what you are
doing here and why, which advantages it brings, what it costs (in
terms of code size), etc.
In short: please pro
On 03/05/2018 08:19 AM, Anatolij Gustschin wrote:
Hi Heinrich,
On Sat, 3 Mar 2018 10:30:17 +0100
Heinrich Schuchardt xypron.g...@gmx.de wrote:
Inform the EFI subsystem that the framebuffer memory is reserved.
Without the patch the AllocatePool boot service allocates memory from the
framebuff
Hi Peng,
I'm glad you are adding HS400 support. Thanks.
On 05/03/2018 10:11, Peng Fan wrote:
Add HS400 support.
Selecting HS400 needs first select HS199 according to spec, so use
a dedicated function for HS400.
Add HS400 related macros.
Remove the restriction of only using the low 6 bits of
EX
Hi experts.
I am new to u-boot and would like to share some concern.
I will use GPIO on a custom board based on LS1043A so for now I’m using the
NXP LS1043ARDB.
When I enable GPIO in configs/ls1043ardb_defconfig cmd/gpio.c does not
compile because of a strange inclusion.
1) My code is based on the
On Sat, 2018-03-03 at 12:00 +, u-boot-requ...@lists.denx.de wrote:
>
> On 1 March 2018 at 16:33, Tom Rini wrote:
> >
> > On Thu, Mar 01, 2018 at 04:10:44PM +0200, Ruslan Bilovol wrote:
> > >
> > > Hi Lukasz,
> > >
> > > On Thu, Mar 1, 2018 at 12:53 PM, Lukasz Majewski
> > > wrote:
> > > >
This was missing the 'S' line causing a warning from genboardscfg.py
Signed-off-by: Tom Rini
---
board/devboards/dbm-soc1/MAINTAINERS | 1 +
1 file changed, 1 insertion(+)
diff --git a/board/devboards/dbm-soc1/MAINTAINERS
b/board/devboards/dbm-soc1/MAINTAINERS
index 8a556e1948bb..625f2c889964
On Sun, Mar 04, 2018 at 04:00:15PM +0200, Ruslan Bilovol wrote:
> On Thu, Mar 1, 2018 at 4:33 PM, Tom Rini wrote:
> > On Thu, Mar 01, 2018 at 04:10:44PM +0200, Ruslan Bilovol wrote:
> >> Hi Lukasz,
> >>
> >> On Thu, Mar 1, 2018 at 12:53 PM, Lukasz Majewski wrote:
> >> > Hi Ruslan,
> >> >
> >> >>
On Mon, Mar 05, 2018 at 05:43:36PM +0800, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee
>
> cmd_ubifs_umount() function would be called directly instead of involving
> whole command machinery in generic firmware loader, so checking on
> ubifs_initialized status need to be done in cmd_ub
On Mon, Mar 05, 2018 at 04:55:15PM +0300, dun...@tecon.ru wrote:
> From: Dmitry Dunaev
Please add some comments about why we're adding this support and where
it's used.
[snip]
> common/image-fit.c | 7 ++
> include/image.h | 12 +++
> include/u-boot/xxhash.h | 143 +
This driver implements register read/write operations for STPMU1.
The STPMU1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF
and 2 power switches. It is accessed via an I2C interface.
This device is used with STM32MP1 SoCs.
Signed-off-by: Patrick Delaunay
---
drivers/power/pmic/Kconfig | 8 +
driv
On Mon, Mar 05, 2018 at 05:43:37PM +0800, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee
>
> cmd_ubifs_mount() function would be called directly instead of
> involving whole command machinery for mounting ubifs in
> generic firmware loader, so some checking codes need to be factored out
add RCC clock driver for STMP32MP157
- base on driver model = UCLASS_CLK
- support ops to enable, disable and get rate
of all SOC clock needed by U-Boot
Signed-off-by: Patrick Delaunay
---
MAINTAINERS|1 +
drivers/clk/Kconfig|8 +
drivers/clk/Makefile |
STM32MP157 bootrom needs a specific header for first boot stage.
This patch adds support of this header in mkimage.
Signed-off-by: Patrick Delaunay
---
common/image.c | 1 +
include/image.h| 1 +
tools/Makefile | 1 +
tools/stm32image.c | 148 ++
This patch-set adds initial support of STMicroelectronics STM32MP157
microprocessor (MPU)
- add new arm arch stm32mp1 (based on armv7)
- support for stm32mp157 SOC (based on Cortex-A7)
- add minimal support for board evaluation board STM32MP157C-ED1
Patrick Delaunay (16):
tools/mkimage: add su
- add new arch stm32mp for STM32 MPU/Soc based on Cortex A
- support for stm32mp157 SOC
- SPL is used as first boot stage loader
- using driver model for all the drivers, even in SPL
- all security feature are deactivated (ETZC and TZC)
- reused STM32 MCU drivers when it is possible
Signed-off-by:
add binding and code for clock tree initialization from device tree
Signed-off-by: Patrick Delaunay
---
doc/device-tree-bindings/clock/st,stm32mp1.txt | 226 ++
drivers/clk/clk_stm32mp1.c | 576 +
include/dt-bindings/clock/stm32mp1-clksrc.h
Add first support for STM32MP157C-ED1 board with "Basic" boot chain
1/ Boot Rom: load SPL with STM32 image header in SYSRAM
2/ SPL: power up and initialize the DDR and load U-Boot image
from SDCARD in DDR
3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated)
Signed-off-by:
- move to livetree and allow to get address to parent
- add stm32mp1 compatible for probe
Signed-off-by: Patrick Delaunay
---
drivers/reset/Kconfig | 2 +-
drivers/reset/stm32-reset.c | 36 ++--
2 files changed, 31 insertions(+), 7 deletions(-)
diff --git
Kmalloc is using memalign allocation function. It is not necessary to
align this structure so to save bytes, we move to calloc.
And kmalloc function can't be used in SPL early stage (in board_init_f())
Signed-off-by: Patrick Delaunay
---
drivers/i2c/stm32f7_i2c.c | 4 ++--
1 file changed, 2 in
Add driver and binding for stm32mp1 ddr controller and phy
Signed-off-by: Patrick Delaunay
---
MAINTAINERS | 1 +
arch/arm/mach-stm32mp/include/mach/ddr.h | 12 +
doc/device-tree-bindings/ram/st,stm32mp1-ddr.txt | 299 ++
drivers/ram/K
- add the 2 new compatible used by STM32MP157
"st,stm32mp157-pinctrl"
"st,stm32mp157-z-pinctrl"
- update the mask for the port
Signed-off-by: Patrick Delaunay
---
drivers/pinctrl/pinctrl_stm32.c | 9 +++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers
1 - 100 of 153 matches
Mail list logo