Hi.
2018-07-09 11:39 GMT+09:00 Simon Glass :
> +Masahiro who might know
>
> On 2 July 2018 at 01:23, Dr. Philipp Tomsich
> wrote:
>> Kever,
>>
>> Could you check the build artifacts in Jenkins to see whether after
>> the ‘make [configname]_defconfig’, the link for asm/arch is correctly
>> set
Migrate most boards to the Cadence I2C driver and
use DM functions to read the MAC address from EEPROM
Additionally, remove the legacy eeprom command from
defconfig since it was only used to provide the functions
to read the MAC address
Boards ZC702 and ZC706 were not migrated because they have
Migrate boards to use the generic kconfig options to
read the MAC address
Signed-off-by: Luis Araneda
---
board/xilinx/zynq/board.c| 7 +++
configs/syzygy_hub_defconfig | 4 +++-
configs/zynq_zybo_defconfig | 4 +++-
include/configs/syzygy_hub.h | 1 -
include/configs/zynq_zybo.h | 1
Migrate boards to use the generic kconfig options to
read the MAC address
Additionally, remove the ZYNQ_GEM_I2C_MAC_OFFSET kconfig
option, since no boards is using it now
Signed-off-by: Luis Araneda
---
board/xilinx/zynqmp/zynqmp.c | 10 --
Add generic kconfig options to read MAC address(es) from an EEPROM
connected to an I2C bus
The SYS_I2C_EEPROM_* options can't be used because they depend
on I2C_EEPROM, which requires a DM driver, and not all boards
have DM I2C drivers yet
Signed-off-by: Luis Araneda
---
drivers/misc/Kconfig |
This series migrate most zynq boards to using the
Cadence DM I2C driver
The first patch adds kconfig options to generalize the concept
of reading the MAC address from an I2C EEPROM. Then the zynq and
zynqmp boards were migrated with patches two and three to use
the options
Finally, the last
This patch is to enable eSDHC for ls1021a.
Signed-off-by: Yinbo Zhu
---
arch/arm/dts/ls1021a.dtsi |1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/arch/arm/dts/ls1021a.dtsi b/arch/arm/dts/ls1021a.dtsi
index 5b3fc6a..59c97d5 100644
--- a/arch/arm/dts/ls1021a.dtsi
+++
This patch is to add eSDHC node for ls1046a.
Signed-off-by: Yinbo Zhu
---
arch/arm/dts/fsl-ls1046a.dtsi |8
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/arch/arm/dts/fsl-ls1046a.dtsi b/arch/arm/dts/fsl-ls1046a.dtsi
index 4acbaf7..7687d12 100644
---
This patch is to add eSDHC node for ls2088a.
Signed-off-by: Yinbo Zhu
---
arch/arm/dts/fsl-ls2080a.dtsi |8
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi
index b0f8517..2d537ae 100644
---
This patch is to add eSDHC node for ls1088a.
Signed-off-by: Yinbo Zhu
---
arch/arm/dts/fsl-ls1088a.dtsi |9 +
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
index 077caf3..72d755a 100644
---
This patch is to add eSDHC node for ls1043a.
Signed-off-by: Yinbo Zhu
---
arch/arm/dts/fsl-ls1043a.dtsi |8
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi
index ff40122..a804f51 100644
---
This patch adds esdhc clock support for ls1088a and ls2088a.
Signed-off-by: Yinbo Zhu
---
.../arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c | 14 ++
1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
This patch is to fix sd boot config compile issue for ls1088a.
Signed-off-by: Yinbo Zhu
---
include/mmc.h |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/include/mmc.h b/include/mmc.h
index 534c317..66e69b7 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -604,7
This enables the folowing to Kconfig:
CONFIG_BLK
CONFIG_DM_MMC
Signed-off-by: Yinbo Zhu
---
Change in v2:
Enable ls1021a CONFIG_BLK and CONFIG_DM_MMC to Kconfig
configs/ls1021atwr_nor_SECURE_BOOT_defconfig |2 ++
configs/ls1021atwr_nor_defconfig
On 05.07.18 19:39, Heinrich Schuchardt wrote:
> The function names utf16_strlen() and utf16_strnlen() are misnomers.
> The functions do not count utf-16 characters but non-zero words.
> So let's rename them to u16_strlen and u16_strnlen().
>
> In utf16_dup() avoid assignment in if clause.
>
>
On Mon, Jul 09, 2018 at 12:14:24AM +0200, Anatolij Gustschin wrote:
> Hi Tom,
>
> The following changes since commit 2121bbe49c27b2b2d865fac4e4071c5a90ae90b2:
>
> lib: div64: fix typeo in include/div64.h (2018-06-29 11:30:39 -0400)
>
> are available in the git repository at:
>
>
On 11 June 2018 at 13:00, Carlo Caione wrote:
> From: Carlo Caione
>
> No functional change but at least we can now guarantee type safety.
>
> Signed-off-by: Carlo Caione
> ---
> arch/arm/mach-rockchip/rk3288-board.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
Reviewed-by:
On 7 June 2018 at 05:00, Carlo Caione wrote:
> From: Carlo Caione
>
> Add support for pin voltage configuration. Besides to support UHS mode
> this is useful when the IO lines are connected to a configurable
> regulator not enabled at boot or always on.
>
> Signed-off-by: Carlo Caione
> ---
>
On 3 July 2018 at 02:48, Bin Meng wrote:
> This adds a generic reset driver for x86 processor.
>
> Signed-off-by: Bin Meng
> ---
>
> drivers/sysreset/Kconfig| 6 +
> drivers/sysreset/Makefile | 1 +
> drivers/sysreset/sysreset_x86.c | 49
>
On 2 July 2018 at 18:06, Joe Hershberger wrote:
> We don't necessarily want to re-enable ctrl-c if it was already disabled
> when calling tstc().
>
> Signed-off-by: Joe Hershberger
> ---
>
> common/console.c | 7 ---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
Reviewed-by: Simon
Hi Bin,
On 3 July 2018 at 02:48, Bin Meng wrote:
> In preparation for the reset driver conversion, eliminate the
> reset_cpu() call in the FSP init path as it's too early for the
> reset driver to work.
>
> Signed-off-by: Bin Meng
> ---
>
> arch/x86/lib/fsp/fsp_common.c | 2 +-
> 1 file
Hi Joe,
On 2 July 2018 at 18:06, Joe Hershberger wrote:
> In raw mode, handle ctrl-c as normal. This allows normal ctrl-c behavior
> such as aborting a command that is timing out without completely
> terminating the sandbox executable.
>
> In [1], Simon disabled this. His reason for it was that
On 3 July 2018 at 02:48, Bin Meng wrote:
> This adds full reset bit in the reset register value in the ACPI FADT
> table, so that kernel can do a thorough reboot.
>
> Signed-off-by: Bin Meng
> ---
>
> arch/x86/cpu/quark/acpi.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Hi Alex,
On 4 July 2018 at 00:48, Alexander Graf wrote:
> On 07/04/2018 09:34 AM, Emmanuel Vadot wrote:
>>
>> On Wed, 4 Jul 2018 09:25:16 +0200
>> Alexander Graf wrote:
>>
>>> On 07/04/2018 09:08 AM, Emmanuel Vadot wrote:
When running with special configuration (OF_BOARD and mmc
Hi Tien Fong,
On 2 July 2018 at 01:26, Chee, Tien Fong wrote:
> On Fri, 2018-06-29 at 21:19 -0700, Simon Glass wrote:
>> Hi Tien Fong,
>>
>> On 28 June 2018 at 01:58, Chee, Tien Fong
>> wrote:
>> >
>> > On Thu, 2018-06-28 at 01:04 -0700, Chee, Tien Fong wrote:
>> > >
>> > > On Wed, 2018-06-27
+Masahiro who might know
On 2 July 2018 at 01:23, Dr. Philipp Tomsich
wrote:
> Kever,
>
> Could you check the build artifacts in Jenkins to see whether after
> the ‘make [configname]_defconfig’, the link for asm/arch is correctly
> set up?
>
> Thanks,
> Philipp.
>
> On 2 Jul 2018, at 09:54,
On 1 July 2018 at 16:58, Ramon Fried wrote:
> Add basic smem sandbox testing.
>
> Signed-off-by: Ramon Fried
>
> ---
> Tom, this patch depends on https://patchwork.ozlabs.org/patch/932965/
>
> Changes in v5: None
> Changes in v4:
> - Fixed typo in function name.
>
> Changes in v3:
> - Adapt to
On 1 July 2018 at 16:57, Ramon Fried wrote:
> Add Sandbox driver for SMEM. mostly stub operations.
>
> Signed-off-by: Ramon Fried
> ---
>
> Changes in v5: None
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
> arch/sandbox/dts/test.dts | 4
>
On 1 July 2018 at 16:57, Ramon Fried wrote:
> The Shared Memory Manager driver implements an interface for allocating
> and accessing items in the memory area shared among all of the
> processors in a Qualcomm platform.
>
> Adapted from the Linux driver (4.17)
>
> Changes from the original Linux
Hi Heinrich,
On 1 July 2018 at 17:41, Heinrich Schuchardt wrote:
> fs_fat_write() is not able to write to subdirectories.
>
> Currently if a filepath with a leading slash is passed, the slash is
> treated as part of the filename to be created in the root directory.
>
> Strip leading
On Thu, Jul 05, 2018 at 04:12:59PM +0900, AKASHI Takahiro wrote:
> On Wed, Jul 04, 2018 at 02:35:19PM +0300, Tuomas Tynkkynen wrote:
> > Hi Akashi,
> >
> > Thank you for the DM conversion.
> >
> > On 07/04/2018 10:36 AM, AKASHI Takahiro wrote:
> > <..snip..>
> > >diff --git
Hi Tom,
The following changes since commit 2121bbe49c27b2b2d865fac4e4071c5a90ae90b2:
lib: div64: fix typeo in include/div64.h (2018-06-29 11:30:39 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-video.git master
for you to fetch changes up to
On 07.07.18 23:39, Heinrich Schuchardt wrote:
> Our implementation of rtc_to_tm() cannot handle dates of more than
> 0x7fff seconds after 1970-01-01.
>
> Adopt the Linux kernel implementation.
>
> Signed-off-by: Heinrich Schuchardt
This patch is slightly out of scope for efi-next and the
On 07.07.18 15:36, Heinrich Schuchardt wrote:
> The crc32 of the runtime services table must be updated after detaching.
>
> efi_update_table_header_crc32() must be __efi_runtime. So move it to
> efi_runtime.c
>
> Signed-off-by: Heinrich Schuchardt
Reviewed-by: Alexander Graf
Alex
On 07.07.18 15:36, Heinrich Schuchardt wrote:
> The function crc32() is needed by the EFI subsystem at runtime. So it has
> to be linked into the runtime section together with all dependencies.
>
> Eliminate empty define ZEXPORT.
>
> Signed-off-by: Heinrich Schuchardt
> ---
> v3
> new
Hi Chris,
thanks for your efforts. This basically works for me on my Kirkwood
LSCHLv2 board. So you may add
Tested-by: Michael Walle
But there are some issues. See below.
[snip]
-#if defined(CONFIG_PHYLIB)
+#if defined(CONFIG_PHYLIB) || defined(CONFIG_DM_ETH)
+#if
On 07.07.18 09:05, Heinrich Schuchardt wrote:
> On 07/06/2018 07:22 AM, Alexander Graf wrote:
>>> We should calculate the crc32 after initalizing all fields of the system
>>> table.
>>>
>>> Signed-off-by: Heinrich Schuchardt
>>
>> Thanks, applied to efi-next
>>
>> Alex
>>
>>
> Hello Alex,
>
>
This converts the following to Kconfig:
CONFIG_NAND_ATMEL
Signed-off-by: Adam Ford
diff --git a/configs/at91sam9260ek_dataflash_cs0_defconfig
b/configs/at91sam9260ek_dataflash_cs0_defconfig
index 3d2b8803ea..c77b8d8a20 100644
--- a/configs/at91sam9260ek_dataflash_cs0_defconfig
+++
Many boards check for CMD_NAND and not NAND. This makes CMD_NAND
imply NAND which will make some Kconfig migration of some NAND
options easier later.
Rsync all defconfig files using moveconfig.py
Signed-off-by: Adam Ford
---
cmd/Kconfig | 1 +
Some boards indicate support from booting NAND or
ONENAND booting, but don't enable the CONFIG_NAND. This
makes those boards imply NAND which will make
enabling other flags that are dependent on CONFIG_NAND
possible and easier to migrate.
Signed-off-by: Adam Ford
diff --git a/common/Kconfig
This converts the following to Kconfig:
CONFIG_NAND_DAVINCI
Signed-off-by: Adam Ford
diff --git a/configs/ea20_defconfig b/configs/ea20_defconfig
index 497e5515d7..43292a126d 100644
--- a/configs/ea20_defconfig
+++ b/configs/ea20_defconfig
@@ -30,6 +30,8 @@ CONFIG_CMD_DIAG=y
This converts the following to Kconfig:
CONFIG_NAND_LPC32XX_SLC
Signed-off-by: Adam Ford
diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
index 14c24ce6f2..8a37122104 100644
--- a/configs/devkit3250_defconfig
+++ b/configs/devkit3250_defconfig
@@ -34,6 +34,7 @@
Change-Id: I8b4af0b27591b6a9d85fb4ecb17e8ca86765b2c0
Signed-off-by: Michael Trimarchi
---
configs/imx6ull_isiot_nand_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/imx6ull_isiot_nand_defconfig
b/configs/imx6ull_isiot_nand_defconfig
index 5d02186..e02bbc9 100644
---
Hi
Sorry mistake ;)
On Sun, Jul 8, 2018 at 10:27 AM, Michael Trimarchi
wrote:
> Change-Id: I8b4af0b27591b6a9d85fb4ecb17e8ca86765b2c0
> Signed-off-by: Michael Trimarchi
> ---
> configs/imx6ull_isiot_nand_defconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git
44 matches
Mail list logo
