On 18/09/2018 04:05, Simon Glass wrote:
HI Jean-Jacques,
On 17 September 2018 at 09:31, Jean-Jacques Hiblot wrote:
scan_configs.py is tool that allow to check how some options are used for
a particular subset of platforms.
The purpose is to identify the targets that are actually using one or
Hi Masahiro,
On 7 September 2018 at 13:15, Masahiro Yamada
wrote:
> If there exist 10 or more nodes of the same type, the alignment
> of "dm tree" command is broken.
>
> Signed-off-by: Masahiro Yamada
> ---
>
> drivers/core/dump.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
This se
Something has changed in the last several month such that when buildman
builds U-Boot incrementally and a new CONFIG option has been added to the
Kconfig, the build hanges waiting for input:
Test new config (NEW_CONFIG) [N/y/?] (NEW)
Since binamn does not connect the build's stdin to anything
LX2160A Soc is based on Layerscape Chassis Generation 3.2 Architecture.
Features:
16 ARM v8 Cortex-A72 cores in 8 cluster, CCN508, SEC,
two 64-bit DDR4 memory controller, RGMII, 8 I2C controllers,
3 serdes modules, USB 3.0, SATA, 4 PL011 SBSA UARTs,
4 TZASC instances, etc.
SoC personalites:
LX
Signed-off-by: Priyanka Jain
---
include/configs/ls2080ardb.h | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 3d53a69..05c02df 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -3
some dpmacs in armv8a based freescale layerscape SOCs can be
configured via both serdes(sgmii, xfi, xlaui etc) bits and via
EC*_PMUX(rgmii) bits in RCW.
e.g. dpmac 17 and 18 in LX2160A can be configured as SGMII from
serdes bits and as RGMII via EC1_PMUX/EC2_PMUX bits
Now if a dpmac is enabled by s
In upcoming freescale board LX2160AQDS, the MDIO bus is muxed.
i.e. same MDIO bus can be routed to eight different slots depending
on mux register settings.
To support this mdio mux behavior, we add each MDIO bus mux as a
separate MDIO bus.
Now, various phy devices can be attached to each of thes
Hello Liviu,
Am 17.09.2018 um 18:51 schrieb Liviu Dudau:
The Arm Versatile Express I2C controller is a simple register-based
controller that uses a register to control the state of the SCL and
SDA lines. Add support for it.
Signed-off-by: Liviu Dudau
---
drivers/i2c/Kconfig | 7 +
Hello Liviu,
Am 17.09.2018 um 18:50 schrieb Liviu Dudau:
The Arm Versatile Express and Juno development boards contain an
OSC clock generator that can be accessed through the Versatile
Express config bus. The generators are quite often being controlled
by some MCU and the config bus offers a uni
Hello Liviu,
Am 17.09.2018 um 18:48 schrieb Liviu Dudau:
Add support for the Arm Versatile Express config bus that is
being used for exposing various subsystems via a generic
configuration bus. This driver adds support for generating
transactions on this configuration bus and can be used by
othe
Hello Liviu,
Am 17.09.2018 um 18:46 schrieb Liviu Dudau:
Remove duplicated inclusion of dm/ofnode.h
Signed-off-by: Liviu Dudau
---
include/dm.h | 1 -
1 file changed, 1 deletion(-)
Reviewed-by: Heiko Schocher
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang
Hello Liviu,
Am 17.09.2018 um 18:45 schrieb Liviu Dudau:
video_init, video_putc and video_puts functions are not implemented
anywhere, remove their declaration from the header.
Signed-off-by: Liviu Dudau
---
include/video.h | 6 --
1 file changed, 6 deletions(-)
Reviewed-by: Heiko Sch
Hello Liviu,
Am 17.09.2018 um 18:44 schrieb Liviu Dudau:
Use the uclass_foreach_dev() macro instead of the open coded version.
Signed-off-by: Liviu Dudau
---
drivers/core/uclass.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Reviewed-by: Heiko Schocher
bye,
Heiko
--
DENX Softw
Hello Liviu,
Am 17.09.2018 um 18:43 schrieb Liviu Dudau:
The comment references a structure name that doesn't exist. Use
the name of the actual uclass.
Signed-off-by: Liviu Dudau
---
include/clk.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Reviewed-by: Heiko Schocher
bye,
Hei
On 17 September 2018 at 10:44, Liviu Dudau wrote:
> Use the uclass_foreach_dev() macro instead of the open coded version.
>
> Signed-off-by: Liviu Dudau
> ---
> drivers/core/uclass.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Reviewed-by: Simon Glass
Perhaps you could also conver
On 17 September 2018 at 10:57, Liviu Dudau wrote:
> With drivers that have prefix names that are quite long (like
> 'versatile_') it is useful to have a wider column for the driver's
> name when dumping the device driver tree.
>
> Signed-off-by: Liviu Dudau
> ---
> drivers/core/dump.c | 8 --
HI Jean-Jacques,
On 17 September 2018 at 09:31, Jean-Jacques Hiblot wrote:
> scan_configs.py is tool that allow to check how some options are used for
> a particular subset of platforms.
> The purpose is to identify the targets that are actually using one or more
> options of interest.
> For exam
On 17 September 2018 at 10:46, Liviu Dudau wrote:
> Remove duplicated inclusion of dm/ofnode.h
>
> Signed-off-by: Liviu Dudau
> ---
> include/dm.h | 1 -
> 1 file changed, 1 deletion(-)
Reviewed-by: Simon Glass
___
U-Boot mailing list
U-Boot@lists.de
On 17 September 2018 at 10:43, Liviu Dudau wrote:
> The comment references a structure name that doesn't exist. Use
> the name of the actual uclass.
>
> Signed-off-by: Liviu Dudau
> ---
> include/clk.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Reviewed-by: Simon Glass
___
On 17 September 2018 at 10:45, Liviu Dudau wrote:
> video_init, video_putc and video_puts functions are not implemented
> anywhere, remove their declaration from the header.
>
> Signed-off-by: Liviu Dudau
> ---
> include/video.h | 6 --
> 1 file changed, 6 deletions(-)
Reviewed-by: Simon Gl
Hi Jen,
On 17 August 2018 at 14:48, Simon Glass wrote:
>
> On 10 August 2018 at 06:54, Jens Wiklander wrote:
> > Converts fdtdec_setup_memory_banksize() to use ofnode functions instead.
> >
> > Signed-off-by: Jens Wiklander
> > ---
> > lib/fdtdec.c | 46 +---
On 17 September 2018 at 16:30, Heinrich Schuchardt wrote:
> Spawn.exept has a try block without 'except'.
>
> If no output is available an OSError may arise. Catch this exception and
> continue testing.
>
> Signed-off-by: Heinrich Schuchardt
> ---
> I suggest that Alex takes the patch because we
On 16 September 2018 at 23:35, Bin Meng wrote:
>
> Now that we already disable the "strict-aliasing" globally, remove
> the duplicates in the nds32/riscv/x86 arch-specific Makefiles.
>
> Signed-off-by: Bin Meng
> Reviewed-by: Rick Chen
>
> ---
>
> arch/nds32/config.mk | 2 +-
> arch/riscv/confi
On 09/16/2018 07:45 AM, Simon Glass wrote:
> When I run
>
> $ sandbox/u-boot -D -c "bootefi selftest"
>
> I get at the end the network timeout failure:
>
> Setting up 'simple network protocol'
> Failed to open socket: 1 Operation not permitted
> Failed to open socket: 1 Operation not permitted
>
On 09/16/2018 07:45 AM, Simon Glass wrote:
> Hi Heinrich,
>
> On 15 September 2018 at 22:02, Heinrich Schuchardt wrote:
>> Hello Simon,
>>
>> in the chat with Alex you indicated that you see a problem with
>> efi_selftest expecting an input before resetting the board.
>>
>> I do not understand wh
Spawn.exept has a try block without 'except'.
If no output is available an OSError may arise. Catch this exception and
continue testing.
Signed-off-by: Heinrich Schuchardt
---
I suggest that Alex takes the patch because we need it when working on the
efi-next branch.
---
test/py/u_boot_spawn.py
Hi Bin,
On Mon, 2018-09-17 at 13:02 +0800, Bin Meng wrote:
> Hi Lukas,
>
> On Mon, Sep 17, 2018 at 5:09 AM Auer, Lukas
> wrote:
> >
> > Hi Bin,
> >
> > On Mon, 2018-09-10 at 21:54 -0700, Bin Meng wrote:
> > > We don't have a reset method on any RISC-V board yet. Instead of
> > > adding the sam
Hi Bin,
On Mon, 2018-09-17 at 12:55 +0800, Bin Meng wrote:
> Hi Lukas,
>
> On Mon, Sep 17, 2018 at 4:54 AM Auer, Lukas
> wrote:
> >
> > Hi Bin,
> >
> > On Mon, 2018-09-10 at 21:54 -0700, Bin Meng wrote:
> > > This adds a helper routine to print CPU information. Currently
> > > it prints all th
Hi Bin,
On Mon, 2018-09-17 at 13:18 +0800, Bin Meng wrote:
> Hi Lukas,
>
> On Mon, Sep 17, 2018 at 5:02 AM Auer, Lukas
> wrote:
> >
> > Hi Bin,
> >
> > On Mon, 2018-09-10 at 21:54 -0700, Bin Meng wrote:
> > > This adds QEMU RISC-V 'virt' board target support, with the hope
> > > of
> > > helpi
Hi Simon,
On Wed, Aug 29, 2018 at 08:51:24PM -0600, Simon Glass wrote:
> Hi,
>
> On 26 August 2018 at 17:13, Eugeniu Rosca wrote:
> > On Sun, Aug 19, 2018 at 09:51:32PM -0400, Tom Rini wrote:
> >> [..] we should be able to say more broadly that just about everyone
> >> can enable this, but only
In efi_next the command
./u-boot -v -d selfconfig.dtb
leads to a segmentation fault for sandbox_defconfig.
The command is executed by ConsoleSandbox.get_spawn().
We cannot expect 'make tests' to succeed until this is fixed.
Valgrind indicates where the segmentation fault occurs:
==13906== Inv
OK, so I got more than 2 weeks off of U-Boot, but here I'm back... ;-)
On 18.08.2018 14:25, Marek Vasut wrote:
On 08/18/2018 10:55 AM, Simon Goldschmidt wrote:
On Fri, Aug 17, 2018 at 12:20 PM Marek Vasut wrote:
On 08/17/2018 08:56 AM, Simon Goldschmidt wrote:
On Fri, Aug 17, 2018 at 1:57 A
On 09.08.2018 23:57, Marek Vasut wrote:
On 08/09/2018 09:17 PM, Simon Goldschmidt wrote:
On Mon, Aug 6, 2018 at 3:45 PM Simon Goldschmidt
wrote:
Marek Vasut schrieb am Mo., 6. Aug. 2018, 15:19:
On 08/06/2018 03:05 PM, Simon Goldschmidt wrote:
This fixes the board's dts to supply SPL with
Hello Wolfgang,
I have a slight problem with the U-Boot git:
git clone http://git.denx.de/u-boot-dm.git fails. Why is this incorrect
link shown on http://git.denx.de/?p=u-boot/u-boot-dm.git;a=summary?
$ git clone http://git.denx.de/u-boot-dm.git foo
Cloning into 'foo'...
warning: alternate disab
On 17.08.2018 08:52, Simon Goldschmidt wrote:
The table of spi flash chips 'spi_flash_ids' currently
includes chip names. The only usage of these is to
print the name when the chip is probed.
Since this message is not shown in SPL, we can remove
the names from the SPL binary.
Removing the chip
The option has never existed and config whitelist script accumulates
it from a comment block, wipe it out from the source code.
Signed-off-by: Vladimir Zapolskiy
---
The change has a trivial merge conflict with another config symbol
removal from https://patchwork.ozlabs.org/patch/970788/ , this
The option is unused, SPL image gets a wanted boot device by standard
spl_boot_device() call.
Signed-off-by: Vladimir Zapolskiy
---
include/configs/work_92105.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h
index 471b3f48616f..67b5
The CONFIG_LPC32XX_SPL option from board include file has never been
used, it is safe to remove it.
Signed-off-by: Vladimir Zapolskiy
---
include/configs/work_92105.h | 3 ---
scripts/config_whitelist.txt | 1 -
2 files changed, 4 deletions(-)
diff --git a/include/configs/work_92105.h b/include
The series contains a couple of trivial changes, which remove
unused legacy defines found in work_92105 board file.
Vladimir Zapolskiy (2):
work_92105: remove unused CONFIG_LPC32XX_SPL configuration option
work_92105: remove unused CONFIG_SPL_NAND_BOOT configuration option
include/configs/wo
To prevent accidental build failures the change converts a number of
NXP LPC32xx specific image targets to be conditionally dependent on
target build configuration. The wrapped image targets always contain
a U-Boot SPL binary and the images are supposed to be directly flashed
on a NAND flash device
The explicit arch specific build symbol allows to group supported
boards, generalize common config options and it will serve as
a dependency for platform only drivers.
Two related board defconfigs are resynced after the change.
Signed-off-by: Vladimir Zapolskiy
---
arch/arm/Kconfig
There is a need to introduce ARCH_LPC32XX build config symbol
to improve selection of build options for drivers, which are
specific to NXP LPC32xx platform only. At the same time the
new Kconfig file and sections can be used to describe common SoC
properties and collect entries of all LPC32xx board
On 09/17/2018 07:42 PM, Heinrich Schuchardt wrote:
> On 09/16/2018 07:45 AM, Simon Glass wrote:
>> Hi Heinrich,
>>
>> On 15 September 2018 at 22:02, Heinrich Schuchardt
>> wrote:
>>> Hello Simon,
>>>
>>> in the chat with Alex you indicated that you see a problem with
>>> efi_selftest expecting an
Create the handle of loaded images and the EFI_LOADED_IMAGE_PROTOCOL
inside efi_setup_loaded_image(). Do not use local variables.
Signed-off-by: Heinrich Schuchardt
---
v2
avoid unused variables if configured without CONFIG_EFI_SELFTEST
---
cmd/bootefi.c | 61
On 09/16/2018 07:45 AM, Simon Glass wrote:
> Hi Heinrich,
>
> On 15 September 2018 at 22:02, Heinrich Schuchardt wrote:
>> Hello Simon,
>>
>> in the chat with Alex you indicated that you see a problem with
>> efi_selftest expecting an input before resetting the board.
>>
>> I do not understand wh
On 09/16/2018 07:45 AM, Simon Glass wrote:
> Hi Heinrich,
>
> On 15 September 2018 at 22:02, Heinrich Schuchardt wrote:
>> Hello Simon,
>>
>> in the chat with Alex you indicated that you see a problem with
>> efi_selftest expecting an input before resetting the board.
>>
>> I do not understand wh
Create the handle of loaded images and the EFI_LOADED_IMAGE_PROTOCOL
inside efi_setup_loaded_image(). Do not use local variables.
Signed-off-by: Heinrich Schuchardt
---
cmd/bootefi.c | 61 +++
include/efi_loader.h | 8 ++---
lib/efi_loade
Remove all CONFIG_DBG_MONITOR references as it is not used
anywhere.
Signed-off-by: Fabio Estevam
---
include/configs/cl-som-imx7.h | 2 --
include/configs/colibri-imx6ull.h | 1 -
include/configs/colibri_imx7.h| 2 --
include/configs/mx7dsabresd.h | 1 -
scripts/config_whitelist.txt
Instead of hardcoding the memory size, use the generic
imx_ddr_size() function, which extracts the memory size
in runtime by reading the DDR controller registers.
This helps in supporting 512MB and 1GB modules.
Signed-off-by: Fabio Estevam
---
Hi Stefan,
I don't have the hardware to test, but
With drivers that have prefix names that are quite long (like
'versatile_') it is useful to have a wider column for the driver's
name when dumping the device driver tree.
Signed-off-by: Liviu Dudau
---
drivers/core/dump.c | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git
Add support for Arm Mali Display Processors DP500, DP550 and DP650.
Only one layer is being used to display the console or boot logo,
even if more layers are supported in the hardware.
Signed-off-by: Liviu Dudau
---
drivers/video/Kconfig | 8 +
drivers/video/Makefile | 1 +
drivers/video/
Add support for the NXP TDA19988 HDMI encoder as used on the Juno
development board from Arm.
Signed-off-by: Liviu Dudau
---
drivers/video/Kconfig| 7 +
drivers/video/Makefile | 1 +
drivers/video/tda19988.c | 637 +++
3 files changed, 645 insertions
The Arm Versatile Express I2C controller is a simple register-based
controller that uses a register to control the state of the SCL and
SDA lines. Add support for it.
Signed-off-by: Liviu Dudau
---
drivers/i2c/Kconfig | 7 +
drivers/i2c/Makefile| 1 +
drivers/i2c/i2c-versatil
The Arm Versatile Express and Juno development boards contain an
OSC clock generator that can be accessed through the Versatile
Express config bus. The generators are quite often being controlled
by some MCU and the config bus offers a uniform way of exposing them.
Signed-off-by: Liviu Dudau
---
Add support for the Arm Versatile Express config bus that is
being used for exposing various subsystems via a generic
configuration bus. This driver adds support for generating
transactions on this configuration bus and can be used by
other drivers to abstract the communication with the actual
func
Remove duplicated inclusion of dm/ofnode.h
Signed-off-by: Liviu Dudau
---
include/dm.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/include/dm.h b/include/dm.h
index bf4b07d28f..2e1afda440 100644
--- a/include/dm.h
+++ b/include/dm.h
@@ -6,7 +6,6 @@
#ifndef _DM_H_
#define _DM_H_
-#incl
video_init, video_putc and video_puts functions are not implemented
anywhere, remove their declaration from the header.
Signed-off-by: Liviu Dudau
---
include/video.h | 6 --
1 file changed, 6 deletions(-)
diff --git a/include/video.h b/include/video.h
index ddc2eeb5a9..e7fc5c94e2 100644
--
Use the uclass_foreach_dev() macro instead of the open coded version.
Signed-off-by: Liviu Dudau
---
drivers/core/uclass.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/core/uclass.c b/drivers/core/uclass.c
index 3113d6a56b..081571951d 100644
--- a/drivers/core/ucla
The comment references a structure name that doesn't exist. Use
the name of the actual uclass.
Signed-off-by: Liviu Dudau
---
include/clk.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/clk.h b/include/clk.h
index c0a20cd47a..8e366163f9 100644
--- a/include/clk.h
++
Convert "CONFIG_AT91SAM9_WATCHDOG" to new "CONFIG_WDT_AT91"
Kconfig option to support driver model and device tree.
Signed-off-by: Prasanthi Chellakumar
---
README| 3 ---
arch/arm/dts/at91sam9260-smartweb.dts | 1 +
arch/arm/dts/at91sam9g20-taurus.dts | 1 +
ar
scan_configs.py is tool that allow to check how some options are used for
a particular subset of platforms.
The purpose is to identify the targets that are actually using one or more
options of interest.
For example, it can tell what targets are still using CONFIG_DM_I2_COMPAT.
This is much slower
On Sun, 2018-09-16 at 18:23 +0100, Peter Robinson wrote:
> The CONFIG_KEYBOARD does nothing as it's legacy and unused
> so just drop it from the config.
>
> Signed-off-by: Peter Robinson
> Cc: Tom Warren
> Cc: Stephen Warren
> Cc: Allen Martin
Reviewed-by: Marcel Ziswiler
> ---
> include/c
On Sun, 2018-09-16 at 18:23 +0100, Peter Robinson wrote:
> Migrate TEGRA_KEYBOARD from headers to Kconfig, only the seaboard
> uses it but we
> drop CONFIG_KEYBOARD as the driver doesn't use the legacy
> drv_keyboard_init.
>
> Signed-off-by: Peter Robinson
> Cc: Tom Warren
> Cc: Stephen Warren
On Mon, 2018-09-17 at 15:51 +0200, Marcel Ziswiler wrote:
> On Sun, 2018-09-16 at 18:23 +0100, Peter Robinson wrote:
> > Migrate USB_EHCI_TEGRA from headers to Kconfig
> >
> > Signed-off-by: Peter Robinson
> > Cc: Tom Warren
> > Cc: Stephen Warren
> > Cc: Marek Vasut
> > Cc: Marcel Ziswiler
>
On Sun, 2018-09-16 at 18:22 +0100, Peter Robinson wrote:
> Migrate SYS_I2C_TEGRA from headers to Kconfig
>
> Signed-off-by: Peter Robinson
> Cc: Tom Warren
> Cc: Stephen Warren
> Cc: Heiko Schocher
> Cc: Marcel Ziswiler
> Cc: peter.ch...@data61.csiro.au
> Cc: Lucas Stach
> Cc: Stefan Agner
On Sun, 2018-09-16 at 18:23 +0100, Peter Robinson wrote:
> Migrate USB_EHCI_TEGRA from headers to Kconfig
>
> Signed-off-by: Peter Robinson
> Cc: Tom Warren
> Cc: Stephen Warren
> Cc: Marek Vasut
> Cc: Marcel Ziswiler
> Cc: peter.ch...@data61.csiro.au
> Cc: Lucas Stach
> Cc: Stefan Agner
>
On Sat, Sep 15, 2018 at 9:13 PM, Marek Vasut wrote:
> The following changes since commit ecb10a41c9adf2c499c3d19fff96a0
> 8bb9ad2aef:
>
> Revert "ARM: da850evm_direct_nor_defconfig: Enable DM_SERIAL"
> (2018-09-14 13:52:15 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.
On Sat, Sep 15, 2018 at 9:12 PM, Marek Vasut wrote:
> The following changes since commit ecb10a41c9adf2c499c3d19fff96a0
> 8bb9ad2aef:
>
> Revert "ARM: da850evm_direct_nor_defconfig: Enable DM_SERIAL"
> (2018-09-14 13:52:15 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.
On Sat, Sep 15, 2018 at 9:12 PM, Marek Vasut wrote:
> The following changes since commit ecb10a41c9adf2c499c3d19fff96a0
> 8bb9ad2aef:
>
> Revert "ARM: da850evm_direct_nor_defconfig: Enable DM_SERIAL"
> (2018-09-14 13:52:15 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.
On Sat, Sep 15, 2018 at 6:22 PM, Angelo Dureghello wrote:
> The following changes since commit 2976d3c1504960d3934a7404b0648e
> dc28b52eb9:
>
> Merge branch 'master' of git://git.denx.de/u-boot-ubi (2018-09-14
> 13:54:37 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de
The UEFI spec mandates that runtime sections are 64kb aligned to enable
support for 64kb page size OSs.
This patch ensures that we extend the runtime section to 64kb to be spec
compliant.
Signed-off-by: Alexander Graf
---
v1 -> v2:
- rename kb to KiB in accordance to the spec
- add refere
On 16.09.18 22:42, Heinrich Schuchardt wrote:
> On 09/17/2018 04:45 AM, Alexander Graf wrote:
>> The UEFI spec mandates that runtime sections are 64kb aligned to enable
> %s/kb/ kiB/g
> The spec requires a multiple of 64,000 not of 65,536.
The other way around you mean I guess? We do usually use
On 09/16/2018 06:14 PM, Otavio Salvador wrote:
> On Sun, Sep 16, 2018 at 6:16 PM Otavio Salvador
> wrote:
>> This upgrades U-Boot to 2018.09 release and drop the backported
>> security fixes which are now included upstream.
>>
>> Signed-off-by: Otavio Salvador
> When I mentioned, on IRC, about
On 09/17/2018 03:57 AM, akuster808 wrote:
>
>
> On 09/16/2018 06:14 PM, Otavio Salvador wrote:
>> On Sun, Sep 16, 2018 at 6:16 PM Otavio Salvador
>> wrote:
>>> This upgrades U-Boot to 2018.09 release and drop the backported
>>> security fixes which are now included upstream.
>>>
>>> Signed-off-
On Sun, 2018-09-16 at 18:22 +0100, Peter Robinson wrote:
> All other Tegra devices that define USB_EHCI_TXFIFO_THRESH use hex
> representation, fix tegra20 to be the same format.
>
> Signed-off-by: Peter Robinson
> Cc: Tom Warren
> Cc: Stephen Warren
> ---
> include/configs/tegra20-common.h |
On Sun, 2018-09-16 at 18:22 +0100, Peter Robinson wrote:
> There's a number of dangling comments in various tegra configs post
> migrations
> of various configs so lets clean them up.
>
> Signed-off-by: Peter Robinson
> Cc: Tom Warren
> Cc: Stephen Warren
> Cc: Marcel Ziswiler
> Cc: Tom Warren
Hi Tom,
The following changes since commit 2976d3c1504960d3934a7404b0648edc28b52eb9:
Merge branch 'master' of git://git.denx.de/u-boot-ubi (2018-09-14
13:54:37 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-x86.git
for you to fetch changes up to 6321da5263b513f1d69
On Mon, Sep 17, 2018 at 5:35 PM Georgii Staroselskii
wrote:
>
> On Mon, Sep 17, 2018 at 05:30:01PM +0800, Bin Meng wrote:
> > Hi Georgii,
> >
> > On Mon, Sep 17, 2018 at 5:28 PM Bin Meng wrote:
> > >
> > > Currently the code builds with a warning:
> > >
> > > w+../arch/x86/cpu/tangier/pinmux.c: I
On Mon, Sep 17, 2018 at 05:30:01PM +0800, Bin Meng wrote:
> Hi Georgii,
>
> On Mon, Sep 17, 2018 at 5:28 PM Bin Meng wrote:
> >
> > Currently the code builds with a warning:
> >
> > w+../arch/x86/cpu/tangier/pinmux.c: In function 'tangier_pinctrl_probe':
> > w+../arch/x86/cpu/tangier/pinmux.c:175
Hi Georgii,
On Mon, Sep 17, 2018 at 5:28 PM Bin Meng wrote:
>
> Currently the code builds with a warning:
>
> w+../arch/x86/cpu/tangier/pinmux.c: In function 'tangier_pinctrl_probe':
> w+../arch/x86/cpu/tangier/pinmux.c:175:11: warning: format '%d' expects
> argument of type 'int', but argument 3
Currently the code builds with a warning:
w+../arch/x86/cpu/tangier/pinmux.c: In function 'tangier_pinctrl_probe':
w+../arch/x86/cpu/tangier/pinmux.c:175:11: warning: format '%d' expects
argument of type 'int', but argument 3 has type 'ofnode {aka union
ofnode_union}' [-Wformat=]
This fixes it.
Hi Tom,
On Mon, Sep 17, 2018 at 4:54 PM Bin Meng wrote:
>
> Hi Tom,
>
> The following changes since commit 2976d3c1504960d3934a7404b0648edc28b52eb9:
>
> Merge branch 'master' of git://git.denx.de/u-boot-ubi (2018-09-14 13:54:37
> -0400)
>
> are available in the git repository at:
>
> git://g
Hi Tom,
The following changes since commit 2976d3c1504960d3934a7404b0648edc28b52eb9:
Merge branch 'master' of git://git.denx.de/u-boot-ubi (2018-09-14
13:54:37 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-x86.git
for you to fetch changes up to eab91d874c084ea11f1
Hi Siva,
+ Boris, Miquel,
Sorry for top posting, we have spi-mem which hopefully pushed in master
for this release.
So, since dual qspi is based with zynq qspi it's better write this as part
of spi-mem driver.
Better to start Linux driver first so that we can get more detail how to
proceed fur
84 matches
Mail list logo