On Wed, 8 May 2019 23:30:01 +
Trent Piepho tpie...@impinj.com wrote:
...
> diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
> index 69fbc8b690..9d7a94ff9d 100644
> --- a/board/wandboard/wandboard.c
> +++ b/board/wandboard/wandboard.c
> @@ -46,6 +46,15 @@ DECLARE_GLOBAL_DAT
On Mon, 2019-05-06 at 22:20 -0700, chee.hong@intel.com wrote:
> From: "Ang, Chee Hong"
>
> Add "SYTEM_RESET" (cold reset) and "CPU_ON" (SMP) PSCI support
> for booting Linux on Stratix 10 platform.
>
> Ang, Chee Hong (3):
> ARM: socfpga: stratix10: Enable PSCI system reset
> ARM: socfpga
On 08.05.19 16:47, Baruch Siach wrote:
This allows SPL to load the main U-Boot image from MMC once DM_MMC is
enabled.
Signed-off-by: Baruch Siach
Reviewed-by: Stefan Roese
Thanks,
Stefan
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.d
On 08.05.19 21:34, Matt Pelland wrote:
mvpp2 already has support for setting MAC addresses but this
functionality was not exposed to the ethernet core. This commit exposes
this functionality so that MAC address assignments stored in U-Boot's
environment are correctly applied before Linux boots.
On Sat, 27 Apr 2019 at 02:15, Ramon Fried wrote:
>
> Add Cadence PCIe endpoint driver supporting configuration
> of header, bars and MSI for device.
>
> Signed-off-by: Ramon Fried
> ---
>
> Changes in v3: None
>
> .../pci_endpoint/cdns,cdns-pcie-ep.txt| 18 +
> drivers/pci_endpoint/Kcon
On Sat, 27 Apr 2019 at 02:15, Ramon Fried wrote:
>
> Add basic PCI endpoint sandbox testing.
>
> Signed-off-by: Ramon Fried
> ---
>
> Changes in v3:
> - Added more testing of sandbox driver
>
> arch/sandbox/include/asm/test.h | 8 +
> test/dm/Makefile| 1 +
> test/dm/pci_ep
On Wed, 2019-05-08 at 14:55 +0200, Marek Vasut wrote:
> On 5/8/19 12:17 PM, Chee, Tien Fong wrote:
> >
> > On Tue, 2019-05-07 at 21:44 +0200, Marek Vasut wrote:
> > >
> > > On 5/7/19 9:43 PM, Simon Goldschmidt wrote:
> > > >
> > > >
> > > >
> > > >
> > > > On 07.05.19 21:41, Marek Vasut wrote
On Mon, 29 Apr 2019 at 03:23, Patrice Chotard wrote:
>
> This patch adds independent watchdog support for stm32mp157c
> in SPL.
>
> Signed-off-by: Patrice Chotard
> ---
>
> arch/arm/dts/stm32mp157-u-boot.dtsi | 4
> 1 file changed, 4 insertions(+)
Reviewed-by: Simon Glass
On Sat, 27 Apr 2019 at 02:15, Ramon Fried wrote:
>
> Add a dummy PCI endpoint for sandbox.
> Supporting only a single function, it allows setting
> and reading header configuration.
>
> Signed-off-by: Ramon Fried
> ---
>
> Changes in v3:
> - Added more description to commit message and kmsg
> - R
On Sat, 27 Apr 2019 at 02:15, Ramon Fried wrote:
>
> Introduce new UCLASS_PCI_EP class for handling PCI endpoint
> devices, allowing to set various attributes of the PCI endpoint
> device, such as:
> * configuration space header
> * BAR definitions
> * outband memory mapping
> * start/stop PCI lin
On 09/05/19 3:07 AM, Andreas Dannenberg wrote:
> The board detection scheme employed on various TI EVMs makes use of
> SRAM scratch space to share data read from an on-board EEPROM between
> the different bootloading stages. Map the associated definition that's
> used to locate this data into the
Hi,
On Fri, 5 Apr 2019 at 05:43, Christoph Müllner
wrote:
>
> Hi Simon,
>
> any plans to get this merged?
Yes, Kever should do it.
- Simon
>
> Thanks,
> Christoph
>
> > On 14.02.2019, at 02:54, Simon Glass wrote:
> >
> > On Tue, 12 Feb 2019 at 18:29, Christoph Muellner
> > wrote:
> >>
> >> T
Attaching GPIO functionality to SDMMC0_DET pin (which
does in Linux base dts) make dwmmc driver "fail to detect
the card".
Card did not respond to voltage select!
It may be because the existing driver can't support gpio
card detection. So, change the pinctrl functionality from
RK_FUNC_GPIO to R
> Subject: Re: [U-Boot] [PATCH 1/2] riscv: set CONFIG_SYS_BOOTM_LEN to
> SZ_64M
>
> On Tue, Apr 9, 2019 at 8:30 PM David Abdurachmanov
> wrote:
> >
> > After updating Fedora/RISCV kernel to 5.1-rc3+ the size increased
> > above the current threshold. Looking into HiKey, Dragonboards, etc.
> > seem
> Subject: Re: [PATCH 2/2] riscv: qemu-riscv.h: define CONFIG_PREBOOT (enables
> extlinux)
>
> On Fri, Apr 12, 2019 at 12:38 AM Auer, Lukas
> wrote:
> >
> > On Thu, 2019-04-11 at 14:51 +0200, David Abdurachmanov wrote:
> > > On Thu, Apr 11, 2019 at 2:41 PM Auer, Lukas
> > > wrote:
> > > > + Bin
>
On 05/08/2019 11:39 AM, Kever Yang wrote:
>
> On 05/08/2019 02:21 AM, Jagan Teki wrote:
>> Devicetree files in RK3399 platform is synced from Linux, like other
>> platforms does. Apart from these u-boot in rk3399 would also require
>> some u-boot specific node like dmc.
>>
>> dmc node has big chu
On 05/08/2019 11:39 AM, Kever Yang wrote:
>
> On 05/08/2019 02:21 AM, Jagan Teki wrote:
>> Now we have
>> - board specific -u-boot.dtsi files for board specific u-boot
>> dts changes.
>> - soc specific rk3399-u-boot.dtsi for soc specific u-boot
>> dts changes.
>>
>> So, include the rk3399-u-b
On 05/08/2019 11:39 AM, Kever Yang wrote:
>
> On 05/08/2019 02:21 AM, Jagan Teki wrote:
>> Add u-boot,dm-pre-reloc property for spi1, so-that the
>> subsequent rk3399 boards which boot from SPI.
>>
>> This help to separate the u-boot specific properties away
>> from base dts files so-that the Lin
On 05/08/2019 11:38 AM, Kever Yang wrote:
>
> On 05/08/2019 02:21 AM, Jagan Teki wrote:
>> - Sometimes u-boot specific dtsi files are included
>> automatically which would build for entire rockchip SoC,
>> even-though the respective dtsi should used it for specific
>> family of rockchip SoC
> From: Marek Vasut [mailto:marek.va...@gmail.com]
> Sent: Tuesday, May 07, 2019 9:11 AM
> To: Atish Patra; u-boot@lists.denx.de
> Cc: Tom Rini; Karsten Merker; Alexander Graf; Alex Kiernan; Anup Patel; Bin
> Meng; Heinrich Schuchardt; Joe Hershberger; Lukas Auer; Michal Simek; Rick
> Jian-Zhi Chen
At present the iasl tool (Intel ACPI (Advanced Configuration and Power
Interface) Source Language compiler) is called in such a way that it uses
the source directory for its temporary files.
This means we end up with these files when building x86 boards:
board/dfi/dfi-bt700/dsdt.aml
board/d
Hi Bin
Bin Meng 於 2019年5月9日 週四 上午10:21寫道:
>
> Hi Rick,
>
> On Thu, May 9, 2019 at 10:01 AM Rick Chen wrote:
> >
> > Hi Bin
> >
> > Bin Meng 於 2019年5月9日 週四 上午9:32寫道:
> > >
> > > Hi Rick,
> > >
> > > On Thu, May 9, 2019 at 9:30 AM Andes wrote:
> > > >
> > > > From: Rick Chen
> > > >
> > > > Thi
On Thu, May 09, 2019 at 12:52:33AM +0530, Jagan Teki wrote:
> Hi Tom,
>
> Please pull this PR.
>
> Summary:
> - H6 Beelink GS1 board (Clément)
> - Olimex A64-Teres-I board (Jonas)
> - sunxi build fix for CONFIG_CMD_PXE|DHCP (Ondrej)
> - Change include order (Jagan)
> - EPHY clock changes (Jagan)
From: Fabio Estevam
Add the TechNexion's logo from their internal U-Boot tree.
Signed-off-by: Fabio Estevam
Signed-off-by: Otavio Salvador
---
tools/logos/technexion.bmp | Bin 0 -> 22390 bytes
1 file changed, 0 insertions(+), 0 deletions(-)
create mode 100644 tools/logos/technexion.bmp
di
+ Rob
On Wed, May 08, 2019 at 11:05:29PM +, Vladimir Oltean wrote:
> On 5/9/19 1:55 AM, Tom Rini wrote:
> > On Wed, May 08, 2019 at 10:52:28PM +, Vladimir Oltean wrote:
> >> On 5/9/19 1:48 AM, Tom Rini wrote:
> >>> On Wed, May 08, 2019 at 10:45:50PM +, Vladimir Oltean wrote:
> On
This add the boot menu option for the DWARF baseboard as well as a
specific config file for users which wish to use it as a pre-defined
board.
Signed-off-by: Otavio Salvador
---
configs/pico-dwarf-imx6ul_defconfig | 66 +
include/configs/pico-imx6ul.h | 6 ++-
Hi Rick,
On Thu, May 9, 2019 at 10:01 AM Rick Chen wrote:
>
> Hi Bin
>
> Bin Meng 於 2019年5月9日 週四 上午9:32寫道:
> >
> > Hi Rick,
> >
> > On Thu, May 9, 2019 at 9:30 AM Andes wrote:
> > >
> > > From: Rick Chen
> > >
> > > This patch will fix Travis failure item as below:
> > > https://travis-ci.org/
Hi Bin
Bin Meng 於 2019年5月9日 週四 上午9:32寫道:
>
> Hi Rick,
>
> On Thu, May 9, 2019 at 9:30 AM Andes wrote:
> >
> > From: Rick Chen
> >
> > This patch will fix Travis failure item as below:
> > https://travis-ci.org/rickchen36/u-boot-riscv/jobs/529605196
> >
> > Check for configs without MAINTAINERS
Hi Sam,
Thanks for the amazing effort to put the recent BCB/AB-related
advancements together and make them work. I really look forward to
seeing this part of mainline. Still, I have some concerns/questions
and hope to get your feedback.
First, the ("Implement Reboot reason support") series includ
From: Rick Chen
This patch will fix Travis failure item as below:
https://travis-ci.org/rickchen36/u-boot-riscv/jobs/529605196
Check for configs without MAINTAINERS entry
Signed-off-by: Rick Chen
Cc: Greentime Hu
---
board/AndesTech/ax25-ae350/MAINTAINERS | 2 ++
1 file changed, 2 insertions
From: Rick Chen
When AE350 boots from ram, use CONFIG_OF_PRIOR_STAGE instead
of CONFIG_OF_BOARD.
Signed-off-by: Rick Chen
Cc: Greentime Hu
Reviewed-by: Bin Meng
Reviewed-by: Lukas Auer
---
configs/ae350_rv32_defconfig | 2 +-
configs/ae350_rv64_defconfig | 2 +-
2 files changed, 2 insertion
From: Rick Chen
When AE350 boots from flash, use CONFIG_OF_SEPARATE instead of
CONFIG_OF_BOARD.
Also remove unused code about prior_stage_fdt_address.
And modify CONFIG_SYS_FDT_BASE as flash address.
Signed-off-by: Rick Chen
Cc: Greentime Hu
Reviewed-by: Bin Meng
Reviewed-by: Lukas Auer
---
From: Rick Chen
Add two defconfigs to support AE350 SMP booting from flash.
Signed-off-by: Rick Chen
Cc: Greentime Hu
Reviewed-by: Bin Meng
Reviewed-by: Lukas Auer
---
configs/ae350_rv32_xip_defconfig | 37 +
configs/ae350_rv64_xip_defconfig | 38
From: Rick Chen
This patch will fix prior_stage_fdt_address write failure problem, when
AE350 boots from flash.
When AE350 boots from flash, prior_stage_fdt_address will be flash
address, we shall avoid it to be written.
Signed-off-by: Rick Chen
Cc: Greentime Hu
Reviewed-by: Bin Meng
Reviewe
Hi Rick,
On Thu, May 9, 2019 at 9:30 AM Andes wrote:
>
> From: Rick Chen
>
> This patch will fix Travis failure item as below:
> https://travis-ci.org/rickchen36/u-boot-riscv/jobs/529605196
>
> Check for configs without MAINTAINERS entry
>
> Signed-off-by: Rick Chen
> Cc: Greentime Hu
> ---
>
From: Rick Chen
In current RISC-V SMP flow, AE350 will encounter the the write
failure problem since hart_lottery and available_harts_lock was
not in ram address but in flash address when booing from flash.
This patch can help to fix the failure problem when AE350 was
booting from flash by disab
From: Rick Chen
When U-Boot boots from flash, during the boot process,
hart_lottery and available_harts_lock variable addresses
point to flash which is not writable. This causes boot
failures on AE350. Introduce a config option CONFIG_XIP
to support such configuration.
Signed-off-by: Rick Chen
On 05/07/2019 11:44 AM, Kever Yang wrote:
>
> On 04/16/2019 09:58 PM, David Wu wrote:
>> Only some Soc need Schmitter feature, so move the
>> implementation into their own files.
>>
>> Signed-off-by: David Wu
> Reviewed-by: Kever Yang
Applied to u-boot-rockchip, thanks!
>
> Thanks,
> - Kever
On 05/07/2019 11:44 AM, Kever Yang wrote:
>
> On 04/16/2019 09:57 PM, David Wu wrote:
>> RK3288 pmu_gpio0 pull setting have no higher 16 writing corresponding
>> bits, need to read before write the register.
>>
>> Signed-off-by: David Wu
> Reviewed-by: Kever Yang
Applied to u-boot-rockchip, th
On 05/07/2019 11:44 AM, Kever Yang wrote:
>
> On 04/16/2019 09:57 PM, David Wu wrote:
>> As the mux/pull/drive feature implement at own file,
>> the type and label are not necessary.
>>
>> Signed-off-by: David Wu
> Reviewed-by: Kever Yang
Applied to u-boot-rockchip, thanks!
>
> Thanks,
> - Ke
On 05/07/2019 11:43 AM, Kever Yang wrote:
>
> On 04/16/2019 09:57 PM, David Wu wrote:
>> As the common set_mux func(), implement the feature at the own file
>> for each Soc.
>>
>> Signed-off-by: David Wu
> Reviewed-by: Kever Yang
Applied to u-boot-rockchip, thanks!
>
> Thanks,
> - Kever
>> --
On 05/07/2019 11:43 AM, Kever Yang wrote:
>
> On 04/16/2019 09:56 PM, David Wu wrote:
>> RK3288 pmu_gpio0 drive strength setting have no higher 16 writing
>> corresponding bits, need to read before write the register.
>>
>> Signed-off-by: David Wu
> Reviewed-by: Kever Yang
Applied to u-boot-ro
On 05/07/2019 11:43 AM, Kever Yang wrote:
>
> On 04/16/2019 09:55 PM, David Wu wrote:
>> As the common set_mux func(), implement the feature at the own file
>> for each Soc.
>>
>> Signed-off-by: David Wu
> Reviewed-by: Kever Yang
Applied to u-boot-rockchip, thanks!
>
> Thanks,
> - Kever
>> --
On 05/07/2019 11:43 AM, Kever Yang wrote:
>
> On 04/16/2019 09:50 PM, David Wu wrote:
>> RK3288 pmu_gpio0 iomux setting have no higher 16 writing corresponding
>> bits, need to read before write the register.
>>
>> Signed-off-by: David Wu
> Reviewed-by: Kever Yang
Applied to u-boot-rockchip, t
On 05/07/2019 11:43 AM, Kever Yang wrote:
>
> On 04/16/2019 09:50 PM, David Wu wrote:
>> Such as rk3288's pins of pmu_gpio0 are a special feature, which have no
>> higher 16 writing corresponding bits, use common set_mux() func would
>> introduce more code, so implement their set_mux() in each So
On 05/07/2019 11:42 AM, Kever Yang wrote:
>
> On 04/16/2019 09:50 PM, David Wu wrote:
>> Some files have the redundant spaces, remove them.
>>
>> Signed-off-by: David Wu
> Reviewed-by: Kever Yang
Applied to u-boot-rockchip, thanks!
>
> Thanks,
> - Kever
>> ---
>>
>> Change in v3:
>> - None
>>
On 05/07/2019 11:42 AM, Kever Yang wrote:
>
> On 04/16/2019 09:50 PM, David Wu wrote:
>> Some Socs use the pull-pin-default config param, need to add it.
>> And input-enable/disable config params are not necessary, remove it.
>>
>> Signed-off-by: David Wu
> Reviewed-by: Kever Yang
Applied to u
Hi Tom,
Here is the second batch of changes for the Rockchip side of the repository.
Clean bill-of-health in Travis-CI at
https://travis-ci.org/keveryang/u-boot/builds/529695743
And I have test on all evb of Rockchip SoCs.
Thanks,
- Kever
The following changes since commit 8d7f06bbbef16f172c
> Subject: Re: [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock
> setting issue"
>
> On Wed, 8 May 2019 13:59:14 +
> Peng Fan wrote:
>
> > > -Original Message-
> > > From: Lukasz Majewski [mailto:lu...@denx.de]
> > > Sent: 2019年5月8日 14:38
> > > To: Peng Fan
> > > Cc: u-boot
> Subject: Re: [i.MX8MM+CCF 11/41] clk: fixed_rate: export clk_fixed_rate
>
> On Wed, 8 May 2019 07:45:39 +
> Peng Fan wrote:
>
> > > -Original Message-
> > > From: Lukasz Majewski [mailto:lu...@denx.de]
> > > Sent: 2019年5月8日 15:40
> > > To: Peng Fan
> > > Cc: sba...@denx.de; feste.
Hi Simon,
Kind reminder, just touching base.
Thanks,
Ramon.
On Sat, Apr 27, 2019 at 11:15 AM Ramon Fried wrote:
>
>
> This patchset adds support for new uclass, UCLASS_PCI_EP
> allowing new set of PCI endpoint drivers.
> Included in the patch is also a driver for Cadence PCIe endpoint.
>
> Chang
These options only apply when not using DM_I2C. When using device
trees, the dt will enable and control the speeds of the I2C
controller(s) and these configuration options have no effect.
So disable them in DM_I2C mode. Otherwise they show up as decoys, and
make it look like one is enabling I2C
When using DM_I2C the speed value supplied to setup_i2c() is not used,
so this code required CONFIG_SYS_MXC_I2C[12]_SPEED to be defined to
compile, but did not actually use them.
Change this so we no longer need to define an unused macro to compile in
DM_I2C mode. Also make it more clear that the
On 5/9/19 1:55 AM, Tom Rini wrote:
> On Wed, May 08, 2019 at 10:52:28PM +, Vladimir Oltean wrote:
>> On 5/9/19 1:48 AM, Tom Rini wrote:
>>> On Wed, May 08, 2019 at 10:45:50PM +, Vladimir Oltean wrote:
On 5/9/19 1:42 AM, Tom Rini wrote:
> On Wed, May 08, 2019 at 10:40:57PM +, Vl
On Fri, Mar 1, 2019 at 3:44 PM Joe Hershberger wrote:
>
> On Tue, Feb 12, 2019 at 6:29 AM Christian Gmeiner
> wrote:
> >
> > This converts the following to Kconfig:
> >CONFIG_IP_DEFRAG
> >
> > Signed-off-by: Christian Gmeiner
>
> Thanks for doing this, but don't we also need to migrate the e
On Sun, Apr 28, 2019 at 2:09 AM Weijie Gao wrote:
>
> In mt7629-rfb.dts, the phy-handle is a reference to the node phy0, not the
> node itself:
>
> phy-handle = <&phy0>;
>
> phy0: ethernet-phy@0 {
> reg = <0>;
> }
>
> However the driver used ofnode_find_subn
On Wed, May 08, 2019 at 10:52:28PM +, Vladimir Oltean wrote:
> On 5/9/19 1:48 AM, Tom Rini wrote:
> > On Wed, May 08, 2019 at 10:45:50PM +, Vladimir Oltean wrote:
> >> On 5/9/19 1:42 AM, Tom Rini wrote:
> >>> On Wed, May 08, 2019 at 10:40:57PM +, Vladimir Oltean wrote:
> On 5/9/19
On 5/9/19 1:48 AM, Tom Rini wrote:
> On Wed, May 08, 2019 at 10:45:50PM +, Vladimir Oltean wrote:
>> On 5/9/19 1:42 AM, Tom Rini wrote:
>>> On Wed, May 08, 2019 at 10:40:57PM +, Vladimir Oltean wrote:
On 5/9/19 1:24 AM, Joe Hershberger wrote:
> On Tue, May 7, 2019 at 5:15 PM Joe He
On 5/9/19 1:24 AM, Joe Hershberger wrote:
> On Tue, May 7, 2019 at 5:15 PM Joe Hershberger wrote:
>>
>> Hi Tom,
>>
>> The following changes since commit 8d7f06bbbef16f172cd5e9c4923cdcebe16b8980:
>>
>> I rebased on your master and built for BB Black. DHCP seems to work fine.
>> MLO also now fits ag
On Wed, May 08, 2019 at 10:45:50PM +, Vladimir Oltean wrote:
> On 5/9/19 1:42 AM, Tom Rini wrote:
> > On Wed, May 08, 2019 at 10:40:57PM +, Vladimir Oltean wrote:
> >> On 5/9/19 1:24 AM, Joe Hershberger wrote:
> >>> On Tue, May 7, 2019 at 5:15 PM Joe Hershberger
> >>> wrote:
>
>
On 5/9/19 1:42 AM, Tom Rini wrote:
> On Wed, May 08, 2019 at 10:40:57PM +, Vladimir Oltean wrote:
>> On 5/9/19 1:24 AM, Joe Hershberger wrote:
>>> On Tue, May 7, 2019 at 5:15 PM Joe Hershberger
>>> wrote:
Hi Tom,
The following changes since commit
8d7f06bbbef16f172cd
On Wed, May 08, 2019 at 10:40:57PM +, Vladimir Oltean wrote:
> On 5/9/19 1:24 AM, Joe Hershberger wrote:
> > On Tue, May 7, 2019 at 5:15 PM Joe Hershberger
> > wrote:
> >>
> >> Hi Tom,
> >>
> >> The following changes since commit
> >> 8d7f06bbbef16f172cd5e9c4923cdcebe16b8980:
> >>
> >> I reb
On Wed, May 08, 2019 at 10:24:29PM +, Joe Hershberger wrote:
> On Tue, May 7, 2019 at 5:15 PM Joe Hershberger wrote:
> >
> > Hi Tom,
> >
> > The following changes since commit 8d7f06bbbef16f172cd5e9c4923cdcebe16b8980:
> >
> > I rebased on your master and built for BB Black. DHCP seems to work
Hi Tom,
This is the series with the AR8xxx phy series removed until we figure it out.
Tested to work fine on your evm.
The following changes since commit 8d7f06bbbef16f172cd5e9c4923cdcebe16b8980:
Merge branch 'master' of git://git.denx.de/u-boot-sh (2019-05-07 09:38:00
-0400)
are available
On Wed, 8 May 2019 07:45:39 +
Peng Fan wrote:
> > -Original Message-
> > From: Lukasz Majewski [mailto:lu...@denx.de]
> > Sent: 2019年5月8日 15:40
> > To: Peng Fan
> > Cc: sba...@denx.de; feste...@gmail.com; dl-uboot-imx
> > ; s...@chromium.org; ja...@amarulasolutions.com;
> > s...@denx
On Wed, 8 May 2019 07:41:18 +
Peng Fan wrote:
> > -Original Message-
> > From: Lukasz Majewski [mailto:lu...@denx.de]
> > Sent: 2019年5月8日 15:31
> > To: Peng Fan
> > Cc: sba...@denx.de; feste...@gmail.com; dl-uboot-imx
> > ; s...@chromium.org; ja...@amarulasolutions.com;
> > s...@denx
On Tue, May 7, 2019 at 5:15 PM Joe Hershberger wrote:
>
> Hi Tom,
>
> The following changes since commit 8d7f06bbbef16f172cd5e9c4923cdcebe16b8980:
>
> I rebased on your master and built for BB Black. DHCP seems to work fine.
> MLO also now fits again.
>
> Merge branch 'master' of git://git.denx.
This prevents messages like
gpio@20a: get_value: error: gpio GPIO2_2 not reserved
when CONFIG_DM_GPIO is enabled.
Also, when CONFIG_DM_GPIO is enabled, checkboard is too
early to use gpio_get_value, so read it directly on failure.
Signed-off-by: Troy Kisky
---
board/boundary/nitrogen6x/nit
Add CONFIG_DM_SPI/CONFIG_DM_SPI_FLASH to all defconfigs whose board is
nitrogen6x.
mx6qsabrelite_defconfig
nitrogen6dl2g_defconfig
nitrogen6dl_defconfig
nitrogen6q2g_defconfig
nitrogen6q_defconfig
nitrogen6s1g_defconfig
Signed-off-by: Troy Kisky
---
configs/mx6qsabre
Migrate to using device tree required for further driver model
integration.
Signed-off-by: Troy Kisky
---
arch/arm/dts/Makefile | 31 ++-
arch/arm/dts/imx6dl-nitrogen6x.dts| 15 +
arch/arm/dts/imx6q-nitrogen6x.dts | 19 ++
arch/arm/dts/imx6q-sabrelite.dts | 19 ++
Add CONFIG_DM_GPIO to all defconfigs whose board is
nitrogen6x.
mx6qsabrelite_defconfig
nitrogen6dl2g_defconfig
nitrogen6dl_defconfig
nitrogen6q2g_defconfig
nitrogen6q_defconfig
nitrogen6s1g_defconfig
This is in preparation for adding CONFIG_DM_SPI.
Signed-off-by: Troy Kisky
---
configs/mx6qsa
Add DM_MMC to all defconfigs whose board is
nitrogen6x.
mx6qsabrelite_defconfig
nitrogen6dl2g_defconfig
nitrogen6dl_defconfig
nitrogen6q2g_defconfig
nitrogen6q_defconfig
nitrogen6s1g_defconfig
This commit is adding multiple configs, but
seems to be the minimum change to not lose features
and stil
On 09.05.19 00:03, Heinrich Schuchardt wrote:
On 5/8/19 7:50 PM, Tom Rini wrote:
On Wed, May 08, 2019 at 07:57:57AM +0200, Heinrich Schuchardt wrote:
The following changes since commit
44237e272f1eac3b026709e76333a07b2d3a3523:
Merge branch 'master' of git://git.denx.de/u-boot-sh (2019-05-06
On 5/8/19 7:50 PM, Tom Rini wrote:
On Wed, May 08, 2019 at 07:57:57AM +0200, Heinrich Schuchardt wrote:
The following changes since commit
44237e272f1eac3b026709e76333a07b2d3a3523:
Merge branch 'master' of git://git.denx.de/u-boot-sh (2019-05-06
07:19:31 -0400)
are available in the Git reposi
On Thu, May 09, 2019 at 12:03:38AM +0200, Heinrich Schuchardt wrote:
> On 5/8/19 7:50 PM, Tom Rini wrote:
> >On Wed, May 08, 2019 at 07:57:57AM +0200, Heinrich Schuchardt wrote:
> >
> >>The following changes since commit
> >>44237e272f1eac3b026709e76333a07b2d3a3523:
> >>
> >>Merge branch 'master' o
Use if/endif for dependencies to give structure to the configuration menu.
Sort important settings to the top.
Signed-off-by: Heinrich Schuchardt
---
lib/efi_loader/Kconfig | 43 +-
1 file changed, 22 insertions(+), 21 deletions(-)
diff --git a/lib/efi_l
The Unicode collation protocol is not needed for EBBR compliance. So let's
make it a customizable option.
The Unicode capitalization table is only needed by this protocol. So let it
depend on the Unicode collation protocol.
Signed-off-by: Heinrich Schuchardt
---
lib/efi_loader/Kconfig |
Our development target is to reach Embedded Base Boot Requirements (EBBR)
specification compliance. Functionality that is not needed for this target
should be customizable.
Provide a new configuration option to idsable the Unicode collation
protocol.
Heinrich Schuchardt (2):
efi_loader: format
On Wed, May 8, 2019 at 2:36 PM Matt Pelland wrote:
>
> mvpp2 already has support for setting MAC addresses but this
> functionality was not exposed to the ethernet core. This commit exposes
> this functionality so that MAC address assignments stored in U-Boot's
> environment are correctly applied
On 5/8/19 5:37 PM, Andreas Dannenberg wrote:
> Enable I2C via driver model as well as the associated set of U-Boot
> commands to allow us interacting with various I2C slave devices.
>
> Signed-off-by: Andreas Dannenberg
> ---
> configs/am65x_hs_evm_a53_defconfig | 4
> configs/am65x_hs_evm_
From: Vignesh R
K3 devices have I2C IP that is same as OMAP2+ family. Allow driver to be
compiled for ARCH_K3.
Signed-off-by: Vignesh R
Signed-off-by: Andreas Dannenberg
---
drivers/i2c/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/Kconfig b/drivers/i
The board detection scheme employed on various TI EVMs makes use of
SRAM scratch space to share data read from an on-board EEPROM between
the different bootloading stages. Map the associated definition that's
used to locate this data into the SRAM scratch space we use on AM654x.
Signed-off-by: And
This will allow for downloading and applying overlays from an MMC/SD
boot media based on the overlay_files ENV variable containing a list
of overlay files.
Signed-off-by: Andreas Dannenberg
---
configs/am65x_hs_evm_a53_defconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git
Enable GPIO driver for PCA953X-compatible I2C-based I/O expander
which includes support for the TCA9554/PCA9554-type expander found
on the AM654 EVM base board.
Signed-off-by: Andreas Dannenberg
---
configs/am65x_evm_a53_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/am6
Enable I2C via driver model as well as the associated set of U-Boot
commands to allow us interacting with various I2C slave devices.
Signed-off-by: Andreas Dannenberg
Signed-off-by: Vignesh R
---
configs/am65x_evm_a53_defconfig | 4
configs/am65x_evm_r5_defconfig | 4
2 files changed
This will allow for downloading and applying overlays from an MMC/SD
boot media based on the overlay_files ENV variable containing a list
of overlay files.
Signed-off-by: Andreas Dannenberg
---
configs/am65x_evm_a53_defconfig | 3 ++-
include/configs/am65x_evm.h | 9 +
2 files change
To enable the use of an EEPROM-based board detection scheme we need to
be able to access the I2C bus associated with the EEPROMs across all
3 stages of U-Boot: R5 SPL, A53 SPL, and A53 U-Boot (proper). So go
ahead and add/update the wkup_i2c0 peripheral module DTS definitions
and its associated pin
The AM654x EVM based on the TI K3 family of SoCs have an updated board
detection EEPROM structure, now comprising variable-sized TLV-type
records, containing a superset of what is already being provided on
earlier platforms such as DRA7. Add basic support for parsing the new
data structures contain
The malloc pool used before relocation is getting tight leading to
out of memory errors doing certain DM-related calls. Since we are
running the A53 SPL out of DDR let's just go ahead and bump its size
as used in U-Boot proper as well as SPL (via Kconfig default value)
from 8KB to 32KB.
Signed-off
The AM654x EVM based on the TI K3 family of SoCs has an updated board
detection EEPROM structure that contains a TLV record of dedicated MAC
addresses rather than a range of MAC addresses as it was used on earlier
platforms such as DRA7. Add a basic function that allows us setting up
Ethernet MAC a
Only U-Boot specifc DT properties or overrides, must be in -u-boot.dtsi.
Pinctrl nodes does not belong here. Now that pinctrl nodes are in kernel
DT, there is no reason to be keep these in -u-boot.dtsi. Move them to
proper places so that it would ease copying DT entries from kernel DT.
Signed-off-
The TI AM654x EVM base board and the associated daughtercards have on-
board I2C-based EEPROMs containing board configuration data. Use the
board detection infrastructure introduced earlier to do the following:
1) Parse the AM654x EVM base board EEPROM and populate items like board
name and MAC
Enable I2C via driver model as well as the associated set of U-Boot
commands to allow us interacting with various I2C slave devices.
Signed-off-by: Andreas Dannenberg
---
configs/am65x_hs_evm_a53_defconfig | 4
configs/am65x_hs_evm_r5_defconfig | 4
2 files changed, 8 insertions(+)
d
This series adds the pieces needed to fully configure the TI AM654x EVM
and its associated (optional) daughtercards using a GPIO-based card
presence detection scheme. It then reads out and parses any I2C EEPROM
data present on any such boards for example board name, serial #,
Ethernet MAC addresses
Add I2C DT nodes
Signed-off-by: Vignesh R
---
arch/arm/dts/k3-am65-main.dtsi | 44
arch/arm/dts/k3-am65-mcu.dtsi| 11
arch/arm/dts/k3-am65-wakeup.dtsi | 11
arch/arm/dts/k3-am65.dtsi| 6 +
4 files changed, 72 insertions(+)
di
The malloc pool used before relocation is getting tight leading to
out of memory errors doing certain DM-related calls. Since we are
running the A53 SPL out of DDR let's just go ahead and bump its size
as used in U-Boot proper as well as SPL (via Kconfig default value)
from 8KB to 32KB.
Signed-off
The AM654 base board has a TCA9554/PCA9554-type GPIO expander on the
wkup_i2c0 bus at address 0x38 that is used to detect the presence of
daughter cards. Add a respective DTS description of this expander
to enable its use.
Signed-off-by: Andreas Dannenberg
---
arch/arm/dts/k3-am654-base-board.d
Enable GPIO driver for PCA953X-compatible I2C-based I/O expander
which includes support for the TCA9554/PCA9554-type expander found
on the AM654 EVM base board.
Signed-off-by: Andreas Dannenberg
---
configs/am65x_hs_evm_a53_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/
From: Vignesh R
There is no need for to include this header here, so drop it.
Signed-off-by: Vignesh R
---
arch/arm/include/asm/omap_i2c.h | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/include/asm/omap_i2c.h b/arch/arm/include/asm/omap_i2c.h
index c1695cbbee..a6975401da 100644
If EFI_LOADER_HII is not set, do not unnecessarily compile files for HII
protocols.
Signed-off-by: Heinrich Schuchardt
---
lib/efi_loader/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/efi_loader/Makefile b/lib/efi_loader/Makefile
index 4e90a35896..e6bbe43154 10
1 - 100 of 209 matches
Mail list logo