Re: [PATCH 3/3] arm: mvebu: Remove CONFIG_SPL_BOOT_DEVICE

On 29.05.22 01:13, Chris Packham wrote: CONFIG_SPL_BOOT_DEVICE was made obsolete by CONFIG_MVEBU_SPL_BOOT_DEVICE_{SPI,MMC,SATA,UART}. CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI is the default so existing users of CONFIG_SPL_BOOT_DEVICE can simply have the option removed. Signed-off-by: Chris Packham Re

Re: [PATCH 2/3] Convert CONFIG_FIXED_SDHCI_ALIGNED_BUFFER to Kconfig

On 29.05.22 01:13, Chris Packham wrote: CONFIG_FIXED_SDHCI_ALIGNED_BUFFER is needed on some Marvell SoCs when booting from MMC. All existing usages of this have the same value so make this the default and have the Kconfig option depend on SPL && MVEBU_SPL_BOOT_DEVICE_MMC. Signed-off-by: Chris Pa

Re: [PATCH 1/3] arm: mvebu: Use MVEBU_SPL_BOOT_DEVICE instead of SPL_BOOT_DEVICE

On 29.05.22 01:13, Chris Packham wrote: Update the way KWB_CFG_SEC_BOOT_DEV is determined to use CONFIG_MVEBU_SPL_BOOT_DEVICE_{SPI,MMC} instead of CONFIG_SPL_BOOT_DEVICE. Signed-off-by: Chris Packham Reviewed-by: Stefan Roese Thanks, Stefan --- arch/arm/mach-mvebu/Makefile | 10 ++-

Re: [PATCH] arch: mvebu: Disable by default unused peripherals in SPL

On 24.05.22 10:58, Pali Rohár wrote: SPL on mvebu loads proper U-Boot from custom Marvell kwbimage format and therefore support for other binary formats is not required to be present in SPL. Boot source of proper U-Boot is defined by compile time options and therefore it is not required to enable

Re: [PATCH 2/2] arm: mvebu: a3720: Add NVMe to BOOT_TARGET_DEVICES list

On 23.05.22 11:14, Pali Rohár wrote: Enable NVMe booting on boards which have enabled NVMe drivers. Signed-off-by: Pali Rohár Reviewed-by: Stefan Roese Thanks, Stefan --- include/configs/mvebu_armada-37xx.h | 7 +++ 1 file changed, 7 insertions(+) diff --git a/include/configs/mveb

Re: [PATCH 1/2] arm: mvebu: a3720: Set BOOT_TARGET_DEVICES list to enabled peripherals

On 23.05.22 11:14, Pali Rohár wrote: This allows to compile U-Boot without some boot option for some A3720 board which does not have that peripheral. Signed-off-by: Pali Rohár Reviewed-by: Stefan Roese Thanks, Stefan --- include/configs/mvebu_armada-37xx.h | 42 -

Re: [PATCH] ubifs: Fix lockup/crash when reading files

Added Tom to Cc... On 23.05.22 11:25, Pali Rohár wrote: On Thursday 19 May 2022 10:04:31 Pali Rohár wrote: On Thursday 19 May 2022 07:01:19 Stefan Roese wrote: On 17.05.22 22:45, Pali Rohár wrote: Commit b1a14f8a1c2e ("UBIFS: Change ubifsload to not read beyond the requested size") added opti

Re: Pull request for efi-2022-07-rc4-2

Hi Heinrich, On Mon, 30 May 2022 at 01:16, Heinrich Schuchardt wrote: > > Dear Tom, > > this replaces pull request for efi-2022-07-rc4. > > The following changes since commit 4fe629d2e8bbda5f265e870d771b92be26e885f6: > >Merge https://source.denx.de/u-boot/custodians/u-boot-riscv > (2022-05-27

[PATCH 19/20] Convert CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR et al to Kconfig

This converts the following to Kconfig: CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS Signed-off-by: Tom Rini --- README| 6 -- common/spl/Kconfig| 14 ++ common/spl/spl_mmc.c

[PATCH 18/20] Convert CONFIG_SYS_NAND_SPL_KERNEL_OFFS to Kconfig

This converts the following to Kconfig: CONFIG_SYS_NAND_SPL_KERNEL_OFFS Signed-off-by: Tom Rini --- common/spl/Kconfig| 4 configs/am335x_evm_defconfig | 1 + configs/am335x_igep003x_defconfig | 1 + configs/am3517_evm_defconfig |

[PATCH 13/20] Convert CONFIG_SPL_TARGET to Kconfig

This converts the following to Kconfig: CONFIG_SPL_TARGET Signed-off-by: Tom Rini --- README | 5 - common/spl/Kconfig | 9 + configs/P1010RDB-PA_36BIT_NAND_defconfig | 1 + configs/P1010RD

[PATCH 20/20] riotboard, syzygy_hub: Disable SPL_FALCON_BOOT_MMCSD

Looking at the git history and values used for the raw kernel/args location, it's clear these platforms only ever did Falcon Mode via filesystem images and not raw MMC/SD locations. Disable CONFIG_SPL_FALCON_BOOT_MMCSD. Signed-off-by: Tom Rini --- configs/riotboard_defconfig | 2 -- configs/sy

[PATCH 16/20] Drop CONFIG_SPL_SIZE

We do not reference CONFIG_SPL_SIZE in the code, remove it. Signed-off-by: Tom Rini --- include/configs/clearfog.h| 3 --- include/configs/controlcenterdc.h | 3 --- include/configs/db-88f6820-amc.h | 3 --- include/configs/db-88f6820-gp.h | 3 --- include/configs/helios4.h |

[PATCH 14/20] Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig

This converts the following to Kconfig: CONFIG_SYS_SPL_ARGS_ADDR In doing so, we also consistently use this variable for SPL_OS_BOOT and not CONFIG_SYS_FDT_BASE in some cases. Signed-off-by: Tom Rini --- common/spl/Kconfig| 8 common/spl/spl_n

[PATCH 17/20] spl: Remove CONFIG_SPL_START_S_PATH and rework the logic behind it

In some cases, when we don't use CONFIG_SPL_FRAMEWORK nor are we on PowerPC using their specific SPL/TPL framework, we need to specify the start.S file to use for these typically very constrained systems. Do this within the Makefile logic, rather than introducing a string-based CONFIG option, as t

[PATCH 15/20] ax25-ae350: Move CONFIG_SYS_FDT_BASE to Kconfig

The address where the device tree will be passed in to U-Boot at is now moved to the Kconfig file. If this is user configurable, it needs to be exposed rather than hidden, and should probably be renamed as well. Cc: Rick Chen Signed-off-by: Tom Rini --- board/AndesTech/ax25-ae350/Kconfig | 4 +

[PATCH 12/20] Remove CONFIG_SPL_STACK_SIZE

This is not used anywhere, drop it. Signed-off-by: Tom Rini --- include/configs/microblaze-generic.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index e9c9bf9281ce..389da112b939 100644 --- a/include/configs/mi

[PATCH 11/20] Drop CONFIG_SPL_SPI_FLASH_MINIMAL

There are no users of CONFIG_SPL_SPI_FLASH_MINIMAL only platforms defining it, drop it. Signed-off-by: Tom Rini --- include/configs/P1010RDB.h | 1 - include/configs/T102xRDB.h | 1 - include/configs/T104xRDB.h | 1 - include/configs/T208xQDS.h | 1 - include/configs/T208xRDB.h

[PATCH 05/20] Convert CONFIG_SPL_RELOC_TEXT_BASE et al to Kconfig

This converts the following to Kconfig: CONFIG_SPL_RELOC_TEXT_BASE CONFIG_SPL_RELOC_STACK CONFIG_SPL_RELOC_MALLOC_ADDR CONFIG_SPL_RELOC_MALLOC_SIZE Signed-off-by: Tom Rini --- README | 13 - board/freescale/p1010rdb/spl.c | 6 +

[PATCH 10/20] Convert CONFIG_SPL_GD_ADDR to Kconfig

This converts the following to Kconfig: CONFIG_SPL_GD_ADDR Signed-off-by: Tom Rini --- board/freescale/p1010rdb/spl.c | 4 ++-- board/freescale/p1_p2_rdb_pc/spl.c | 4 ++-- common/spl/Kconfig | 8 configs/P1010RDB-PA_36BIT_NAND_defcon

[PATCH 09/20] etamin: Remove CONFIG_SPL_CMT defines

These are presumably private to non-upstream code, remove. Signed-off-by: Tom Rini --- include/configs/etamin.h | 6 -- 1 file changed, 6 deletions(-) diff --git a/include/configs/etamin.h b/include/configs/etamin.h index 9cf93924df93..383beee17aec 100644 --- a/include/configs/etamin.h +++

[PATCH 08/20] Remove CONFIG_SYS_SPL_LEN largely

This is mostly unused. In the case where it is currently used, it means the same as CONFIG_SPL_PAD_TO, which is already set for the platform. Signed-off-by: Tom Rini --- include/configs/corvus.h| 2 -- include/configs/gardena-smart-gateway-at91sam.h | 2 -- include/confi

[PATCH 04/20] Convert CONFIG_TPL_NAND_INIT to Kconfig

This converts the following to Kconfig: CONFIG_TPL_NAND_INIT Signed-off-by: Tom Rini --- drivers/mtd/nand/raw/Kconfig | 4 drivers/mtd/nand/raw/Makefile | 2 +- drivers/mtd/nand/raw/fsl_ifc_spl.c | 2 +- include/configs/P1010RDB.h | 1 - include/configs/p1_p2_rdb_pc.h

[PATCH 02/20] imx6: Update CONFIG_SPL_STACK defaults in Kconfig

Update the Kconfig entry to have the correct defaults for i.MX6 platforms, and move the existing large comment from imx6_spl.h to doc/imx/common/imx6.txt so that it's not lost. Signed-off-by: Tom Rini --- common/spl/Kconfig | 4 ++- configs/apalis_imx6_defconfig| 2 --

[PATCH 03/20] imx7: Update CONFIG_SPL_STACK defaults in Kconfig

Update the Kconfig entry to have the correct defaults for i.MX7 platforms, and move the existing large comment from imx7_spl.h to doc/imx/common/imx7.txt so that it's not lost. Signed-off-by: Tom Rini --- common/spl/Kconfig | 3 ++- configs/cl-som-imx7_defconfig | 2 --

Re: [RFC PATCH v2 2/8] rockchip: Add binman definitions for final images

On 22/05/2022 03:55, Andrew Abbott wrote: > On Thu May 19, 2022 at 9:36 PM AEST, Alper Nebi Yasak wrote: >> Do we need the 'idbloader.img' as a build output, assuming we have a >> working 'u-boot-rockchip.bin'? I'm asking because Simon was trying to >> drop it in a similar patch [1]. > > I was kee

Pull request for efi-2022-07-rc4-2

Dear Tom, this replaces pull request for efi-2022-07-rc4. The following changes since commit 4fe629d2e8bbda5f265e870d771b92be26e885f6: Merge https://source.denx.de/u-boot/custodians/u-boot-riscv (2022-05-27 08:50:42 -0400) are available in the Git repository at: https://source.denx.de/u-b

Re: [PATCH] mach-rockchip: make_fit_atf.py: support OP-TEE tee.bin v1 format

On 28/05/2022 01:08, Jerome Forissier wrote: > On 5/27/22 21:24, Alper Nebi Yasak wrote: >> On 11/05/2022 18:35, Jerome Forissier wrote: >>> +if paged_sz != 0: >>> +raise ValueError("OP-TEE paged mode not supported") >> >> Is this not feasible/necessary to do, or just not implem

Re: [PATCH 01/12] env: Complete generic support for writable list

On 29.05.22 03:46, Marek Vasut wrote: > On 5/28/22 15:02, Jan Kiszka wrote: >> From: Jan Kiszka >> >> This completes what 890feecaab72 started by selecting ENV_APPEND and >> ENV_IS_NOWHERE and by moving this driver to top if the list. This > > s@if the list@of the list@ > >> ensures that load op

Re: [PATCH] doc: sandbox: Add additional valgrind documentation

On 5/28/22 4:20 AM, Heinrich Schuchardt wrote: On 5/27/22 15:25, Sean Anderson wrote: On 5/27/22 3:14 AM, Heinrich Schuchardt wrote: On 5/27/22 05:36, Sean Anderson wrote: This document some additional options which can be used with valgrind, as Thanks for enhancing this document nits %s/do

Re: [PATCH 3/3] arm: mvebu: Remove CONFIG_SPL_BOOT_DEVICE

On Sun, 29 May 2022 11:13:18 +1200 Chris Packham wrote: > CONFIG_SPL_BOOT_DEVICE was made obsolete by > CONFIG_MVEBU_SPL_BOOT_DEVICE_{SPI,MMC,SATA,UART}. > CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI is the default so existing users of > CONFIG_SPL_BOOT_DEVICE can simply have the option removed. > > Signed

Re: [PATCH 2/3] Convert CONFIG_FIXED_SDHCI_ALIGNED_BUFFER to Kconfig

On Sun, 29 May 2022 11:13:17 +1200 Chris Packham wrote: > CONFIG_FIXED_SDHCI_ALIGNED_BUFFER is needed on some Marvell SoCs when > booting from MMC. All existing usages of this have the same value so > make this the default and have the Kconfig option depend on SPL && > MVEBU_SPL_BOOT_DEVICE_MMC.

Re: [PATCH v2 1/2] bootmenu: use utf-8 for menu title

On Sunday 29 May 2022 10:37:23 Masahisa Kojima wrote: > On Sat, 28 May 2022 at 17:37, Heinrich Schuchardt wrote: > > On 5/26/22 12:09, Masahisa Kojima wrote: > > > @@ -183,13 +183,13 @@ static int prepare_bootmenu_entry(struct > > > bootmenu_data *menu, > > > return -ENOMEM;