On Mon, 26 Sept 2022 at 19:37, Jassi Brar wrote:
>
> On Mon, Sep 26, 2022 at 5:08 AM Sughosh Ganu wrote:
> >
> > On Mon, 26 Sept 2022 at 08:29, Jassi Brar wrote:
> > > .
> > > > +static int fwu_boottime_checks(void *ctx, struct event *event)
> > > > +{
> > > > + int ret;
> > > > +
On Mon, 26 Sept 2022 at 20:12, Jassi Brar wrote:
>
> On Mon, Sep 26, 2022 at 5:00 AM Sughosh Ganu wrote:
> >
> > On Mon, 26 Sept 2022 at 08:28, Jassi Brar wrote:
> > >
>
> > >
> > > .
> > > > +/**
> > > > + * fwu_revert_boot_index() - Revert the active index in the FWU
> > > > metadata
> >
On Mon, 26 Sept 2022 at 20:24, Jassi Brar wrote:
>
> On Mon, Sep 26, 2022 at 4:01 AM Sughosh Ganu wrote:
> > On Mon, 26 Sept 2022 at 08:25, Jassi Brar wrote:
>
> > > .
> > > >
> > > > +static __maybe_unused efi_status_t fwu_post_update_process(bool
> > > > fw_accept_os)
> > > > +{
> > > > +
The udelay() function in lib/time.c contains a WATCHDOG_RESET()
call. The only reason this doesn't lead to a catastrophic infinite
recursion is due to the rate-limiting in wdt-uclass.c:
if (time_after_eq(now, priv->next_reset)) {
priv->next_reset = now + pri
EEPROM stores identification information about board like a board name,
revision, serial number and ethernet MAC address. U-Boot is capable to read
nvmemX aliases and read/display provided information when nvmem alias link
is described.
Signed-off-by: Michal Simek
---
arch/arm/dts/zynq-zc702.dt
Xilinx Zynq evaluation boards have factory program content in eeprom.
Enable reading and decoding eeprom content to get information about board
name, revision and especially getting ethernet mac address.
Signed-off-by: Michal Simek
---
board/xilinx/zynq/board.c | 3 +++
1 file changed, 3 insert
Hi Rasmus,
(add Pali to Cc)
On 27.09.22 09:45, Rasmus Villemoes wrote:
The udelay() function in lib/time.c contains a WATCHDOG_RESET()
call. The only reason this doesn't lead to a catastrophic infinite
recursion is due to the rate-limiting in wdt-uclass.c:
if (time_after_eq(now
Remove prototype for the removed function fdt_fixup_nor_flash_size.
This patch has no impact as the function is never used.
Fixes: 98f705c9cefd ("powerpc: remove 4xx support")
Signed-off-by: Patrick Delaunay
---
include/fdt_support.h | 2 --
1 file changed, 2 deletions(-)
diff --git a/include/
Hi,
On 9/26/22 17:59, Patrice Chotard wrote:
Some STM32 MCU's board need their SYS_MALLOC_F_LEN value enlarged
to avoid the "alloc space exhausted" error message during their boot
process.
Use the default SYS_MALLOC_F_LEN value which is set to 0x2000 in
Kconfig.
Signed-off-by: Patrice Chotard
The Nuvoton Arbel NPCM8XX SoC is a fourth-generation BMC.
The NPCM8XX computing subsystem comprises a quadcore ARM
Cortex A35 ARM-V8 architecture.
Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX.
This patchset was tested on the Arbel NPCM8XX evaluation board.
And DTS is base on
Add clock controller driver for NPCM845
Signed-off-by: Jim Liu
---
drivers/clk/nuvoton/Makefile | 1 +
drivers/clk/nuvoton/clk_npcm8xx.c | 98 +++
2 files changed, 99 insertions(+)
create mode 100644 drivers/clk/nuvoton/clk_npcm8xx.c
diff --git a/drivers/clk/n
Add basic support for the Nuvoton NPCM845 EVB (Arbel).
Signed-off-by: Jim Liu
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/nuvoton-common-npcm8xx.dtsi | 170 ++
arch/arm/dts/nuvoton-npcm845-evb.dts | 30
arch/arm/dts/nuvoton-npcm845.
From: Marcel Ziswiler
Update the distro config env memory layout for the Apalis iMX6,
Colibri iMX6, Colibri iMX6ULL and Colibri iMX7:
- loadaddr=0x8420 allows for 64MB area for uncompressing (ie FIT
images)
- fdt_addr_r = loadaddr + 64MB : allows for 64MB kernel
- scriptaddr = fdt_addr_r +
Currently, AUTOBOOT_KEYED and its variant AUTOBOOT_ENCRYPTION are
broken when one has an external always-running watchdog device with a
timeout shorter than the configured boot delay (in my case, I have a
gpio-wdt one with a timeout of 1 second), because we fail to call
WATCHDOG_RESET() in the loop
The fix and explanation is in the first patch, which I hope can make
it into v2022.10, it should be rather uncontroversial.
The second patch may make sense on its own, but is not at all urgent
and can be considered a mere suggestion, but it was convenient for
making the following two patches less
This is a companion to u-boot,noautostart. If one has a single
watchdog device that one does want to have auto-started, but several
others that one doesn't, the only way currently is to set the
CONFIG_WATCHDOG_AUTOSTART and then use the opt-out for the majority.
The main motivation for this is to
In order to test that U-Boot actually maintains the watchdog device(s)
during long-running busy-loops, such as those where we wait for the
user to stop autoboot, we need a watchdog device that actually does
something during those loops; we cannot test that behaviour via the DM
test framework.
So i
In order to test that we properly handle watchdog(s) during the "wait
for the user to interrupt autoboot" phase, we need a watchdog device
to be watching us.
Signed-off-by: Rasmus Villemoes
---
arch/sandbox/dts/sandbox.dtsi | 6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/sandbox/d
The udelay() function in lib/time.c contains a WATCHDOG_RESET()
call. So use __udelay() in max6370_wdt.c to prevent recursion.
Fixes: 0a095fc53b15 ("watchdog: Add MAX6370 watchdog timer driver")
Signed-off-by: Pali Rohár
---
drivers/watchdog/max6370_wdt.c | 2 +-
1 file changed, 1 insertion(+),
On Tuesday 27 September 2022 10:00:00 Stefan Roese wrote:
> The max6370_wdt.c driver has the same problem AFAICT. Pali, could you
> please take a look a this?
Done, here is patch:
https://patchwork.ozlabs.org/project/uboot/patch/20220927101919.6999-1-p...@kernel.org/
On 27.09.22 12:19, Pali Rohár wrote:
The udelay() function in lib/time.c contains a WATCHDOG_RESET()
call. So use __udelay() in max6370_wdt.c to prevent recursion.
Fixes: 0a095fc53b15 ("watchdog: Add MAX6370 watchdog timer driver")
Signed-off-by: Pali Rohár
Reviewed-by: Stefan Roese
Thanks,
On 27.09.22 11:54, Rasmus Villemoes wrote:
Currently, AUTOBOOT_KEYED and its variant AUTOBOOT_ENCRYPTION are
broken when one has an external always-running watchdog device with a
timeout shorter than the configured boot delay (in my case, I have a
gpio-wdt one with a timeout of 1 second), because
On 2022/9/27 17:55, Pankaj Raghav wrote:
This line probably got in by mistake as there is no fs_mutex member in
the btrfs_fs_info struct.
Signed-off-by: Pankaj Raghav
Which branch is the code based on?
I don't believe it's upstream, as such compiling error should be exposed
very easily.
On 2022/9/27 18:39, Qu Wenruo wrote:
On 2022/9/27 17:55, Pankaj Raghav wrote:
This line probably got in by mistake as there is no fs_mutex member in
the btrfs_fs_info struct.
Signed-off-by: Pankaj Raghav
Which branch is the code based on?
I don't believe it's upstream, as such compilin
On 2022/9/27 18:49, Pankaj Raghav wrote:
Which branch is the code based on?
I actually cloned it from u-boot github master.
https://github.com/u-boot/u-boot/blob/f117c54cc83e3c519883edb5a48062644d38c443/fs/btrfs/disk-io.c#L785
I don't believe it's upstream, as such compiling error shoul
From: Samuel Obuch
Use __raw_read* and __raw_write* functions to ensure read/write
is passed to the memory-mapped regions, as non-volatile accesses
may get optimised out.
Signed-off-by: Samuel Obuch
---
drivers/net/xilinx_emaclite.c | 9 -
1 file changed, 4 insertions(+), 5 deletions(-
From: Samuel Obuch
Function ioremap_nocache seems to be defined only for MIPS and Microblaze
architectures. Therefore, the function call in the emaclite driver causes
this driver to be unusable with other architectures, for example RISC-V.
Use ioremap function instead of ioremap_nocache, and inc
From: Samuel Obuch
The maximum length is capped similarly to the emaclite_send function.
Avoid integer underflow for values of ip->ip_len < 30, the minimum
length of an IP packet is 21 bytes.
Signed-off-by: Samuel Obuch
---
drivers/net/xilinx_emaclite.c | 4 +++-
1 file changed, 3 insertions(+
On 9/25/22 09:37, teik.heng.ch...@intel.com wrote:
From: Tien Fong Chee
Ethernet initialization is only work with properly set MAC addresses.
Hence, this config is required to create the random MAC addresses
for Ethernet initialization.
Signed-off-by: Tien Fong Chee
Signed-off-by: Teik Hen
Chin Liang is no longer actively maintaining this project.
Signed-off-by: Dinh Nguyen
---
board/altera/arria10-socdk/MAINTAINERS | 1 -
board/altera/arria5-socdk/MAINTAINERS| 1 -
board/altera/cyclone5-socdk/MAINTAINERS | 1 -
board/altera/stratix10-socdk/MAINTAINERS | 1 -
4 files change
Use the word 'uclass' instead of 'if_type' to complete the conversion.
Signed-off-by: Simon Glass
---
Changes in v4:
- Fix comments from Takahiro Akashi missed on the previous revision
Changes in v3:
- Drop previously applied patches
- Rebase on -next after EFI changes
Changes in v2:
- Use con
Some RK3399 boards, such as newer revisions of NanoPi R4S, do not
provide an EEPROM chip containing a globally unique MAC address.
Currently, this means that a randomly generated temporary MAC address
may be generated each time the device is rebooted, leading to ARP cache
issues and other confusin
> On 26. Sep 2022, at 13:59, Chen-Yu Tsai wrote:
>
> On Mon, Sep 26, 2022 at 7:53 PM Christian Kohlschütter
> wrote:
>>
>> Some RK3399 boards, such as newer revisions of NanoPi R4S, do not
>> provide an EEPROM chip containing a globally unique MAC address.
>>
>> Currently, this means that a r
On 26. Sep 2022, at 01:45, Marek Vasut wrote:
>
> On 9/25/22 16:46, Christian Kohlschütter wrote:
>> When detecting USB storage devices, we currently skip everything that is
>> not marked as "undefined device class".
>> Composite devices such as tinyusb's CDC+MSC identify as "miscellaneous"
>> (
This line probably got in by mistake as there is no fs_mutex member in
the btrfs_fs_info struct.
Signed-off-by: Pankaj Raghav
---
fs/btrfs/disk-io.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 8043abc1bd..c80f8e8028 100644
--- a/fs/btrfs/dis
> Which branch is the code based on?
>
I actually cloned it from u-boot github master.
https://github.com/u-boot/u-boot/blob/f117c54cc83e3c519883edb5a48062644d38c443/fs/btrfs/disk-io.c#L785
> I don't believe it's upstream, as such compiling error should be exposed
> very easily.
>
Actually, I
Hello Sughosh and all,
On Mon, 26 Sept 2022 at 10:46, Sughosh Ganu wrote:
>
> hi Ilias,
>
> On Thu, 22 Sept 2022 at 14:16, Ilias Apalodimas
> wrote:
> >
> > Hi Sughosh
> >
> > On Thu, Sep 15, 2022 at 01:44:39PM +0530, Sughosh Ganu wrote:
> > > In the FWU Multi Bank Update feature, the informatio
On Thu, 15 Sept 2022 at 10:15, Sughosh Ganu wrote:
>
> The FWU Multi Bank Update feature allows the platform to boot the
> firmware images from one of the partitions(banks). The first stage
> bootloader(fsbl) passes the value of the boot index, i.e. the bank
> from which the firmware images were b
On 9/27/22 10:39, Patrick DELAUNAY wrote:
> Hi,
>
> On 9/26/22 17:59, Patrice Chotard wrote:
>> Some STM32 MCU's board need their SYS_MALLOC_F_LEN value enlarged
>> to avoid the "alloc space exhausted" error message during their boot
>> process.
>> Use the default SYS_MALLOC_F_LEN value which i
Define rtc alias on zc702/zc706 boards.
Signed-off-by: Michal Simek
---
arch/arm/dts/zynq-zc702.dts | 3 ++-
arch/arm/dts/zynq-zc706.dts | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts
index 99ee87bb2453..f04129fd
Hey Etiennem
[...]
> > > > + uint *secondary_mpart)
> > > > +{
> > > > + int i, ret;
> > > > + u32 mdata_parts;
> > > > + efi_guid_t part_type_guid;
> > > > + struct disk_partition info;
> > > > + const efi_guid_t fwu_mdata_guid = FWU_MDATA_GUID;
Hi Tom,
Please pull the STM32 related fixes for u-boot/next, v2022.10:
u-boot-stm32-20220927
CI status: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/13610
Thanks
Patrice
The following changes since commit ebdd6afa543324648138f780a648b8fb65d488eb:
Merge branch 'nex
Hello Sughosh,
Thanks for the documentation. See comments on few typos found (with
help of my editor) and suggestions.
Best regards,
Etienne
On Thu, 15 Sept 2022 at 10:16, Sughosh Ganu wrote:
>
> Add documentattion for the FWU Multi Bank Update feature. The document
s/documentattion/documenta
Hi Alice,
On Tue, Sep 6, 2022 at 6:37 AM Alice Guo (OSS) wrote:
>
> From: Alice Guo
Please add a commit log.
> Signed-off-by: Alice Guo
> --- a/arch/arm/include/asm/arch-imx9/gpio.h
> +++ b/arch/arm/include/asm/arch-imx9/gpio.h
> @@ -6,6 +6,8 @@
> #ifndef __ASM_ARCH_IMX9_GPIO_H
> #define _
Hi Loic,
On Thu, Sep 22, 2022 at 6:19 AM Loic Poulain wrote:
>
> This enables armv8 crypto extension usage for SHA1/SHA256.
>
> Which speed up sha1/sha256 operations, about 10x faster with
> a imx8mm evk for a 20MiB kernel hash verification (12ms vs 165ms).
>
> Signed-off-by: Loic Poulain
Great
On Sun, Aug 21, 2022 at 7:31 PM wrote:
>
> Migrate SD card boot detection from Technexion u-boot for pico-imx7d SoM.
>
> From ecd4f6ecbec290c63504f7ec3a9b478425235d14 Mon Sep 17 00:00:00 2001
> From: "Benjamin Szőke"
>
> Date: Sun, 21 Aug 2022 21:08:55 +0200
> Subject: [PATCH] pico-imx7d: add ba
Hi Fabio
On Mon, Sep 26, 2022 at 6:40 PM Fabio Estevam wrote:
>
> Reduce the SPL binary size by building some clocks only for the
> non-SPL case, such as Ethernet and PWM and by also building ECSPI
> and QSPI when their respective drivers are enabled.
>
> On a imx8mm_evk_defconfig the following S
Hi Michael,
On 27/09/2022 09:24, Michael Nazzareno Trimarchi wrote:
Fabio Estevam (4):
clk-imx8mm: Only build PWM clocks in non-SPL code
clk-imx8mm: Move CLK_ENET_AXI to the non-SPL section
I'm not really convinced of those two. I mean with should maybe think
about
some different approa
On 27.09.22 09:45, Rasmus Villemoes wrote:
The udelay() function in lib/time.c contains a WATCHDOG_RESET()
call. The only reason this doesn't lead to a catastrophic infinite
recursion is due to the rate-limiting in wdt-uclass.c:
if (time_after_eq(now, priv->next_reset)) {
On 27.09.22 12:19, Pali Rohár wrote:
The udelay() function in lib/time.c contains a WATCHDOG_RESET()
call. So use __udelay() in max6370_wdt.c to prevent recursion.
Fixes: 0a095fc53b15 ("watchdog: Add MAX6370 watchdog timer driver")
Signed-off-by: Pali Rohár
Applied to u-boot-watchdog/master
On 27.09.22 11:54, Rasmus Villemoes wrote:
Currently, AUTOBOOT_KEYED and its variant AUTOBOOT_ENCRYPTION are
broken when one has an external always-running watchdog device with a
timeout shorter than the configured boot delay (in my case, I have a
gpio-wdt one with a timeout of 1 second), because
Hi Tom,
please pull the following watchdog related last minute fixes:
- autoboot: make sure watchdog device(s) are handled with keyed
autoboot (Rasmus)
- gpio_wdt: use __udelay() to avoid recursion (Rasmus)
- watchdog: max6370: u
On Mon, Sep 26, 2022 at 04:03:28PM +0200, Michal Simek wrote:
> Hi Tom,
>
> please pull the following patches to your tree. It is the second round with
> small updates but especially adding new Xilinx SOC.
> CI loop doesn't show any issue.
>
> Thanks,
> Michal
>
>
> The following changes since
On Mon, Sep 26, 2022 at 07:39:22AM +, Leo Liang wrote:
> Hi Tom,
>
> The following changes since commit 435596d57f8beedf36b5dc858fe7ba9d6c03334b:
>
> Merge tag 'u-boot-imx-20220922' of
> https://gitlab.denx.de/u-boot/custodians/u-boot-imx (2022-09-22 10:29:29
> -0400)
>
> are available
Tom
Sorry, this PR is not dedicated for v2022.10 as indicated in the subject but
for v2023.01.
Patrice
On 9/27/22 14:00, Patrice CHOTARD wrote:
> Hi Tom,
>
> Please pull the STM32 related fixes for u-boot/next, v2022.10:
> u-boot-stm32-20220927
>
> CI status:
> htt
Hi Fabio
On Tue, Sep 27, 2022 at 2:29 PM Fabio Estevam wrote:
>
> Hi Michael,
>
> On 27/09/2022 09:24, Michael Nazzareno Trimarchi wrote:
>
> >> Fabio Estevam (4):
> >> clk-imx8mm: Only build PWM clocks in non-SPL code
> >> clk-imx8mm: Move CLK_ENET_AXI to the non-SPL section
> >
> > I'm not
Hi Michael,
On Tue, Sep 27, 2022 at 10:38 AM Michael Nazzareno Trimarchi
wrote:
> When Dario wrote the Ti clock, he was using the dtsi. One idea can be
> understand if this approch
> cost less in term of space in the SPL
Care to submit a patch series with your proposal?
Hi Fabio
On Tue, Sep 27, 2022 at 3:44 PM Fabio Estevam wrote:
>
> Hi Michael,
>
> On Tue, Sep 27, 2022 at 10:38 AM Michael Nazzareno Trimarchi
> wrote:
>
> > When Dario wrote the Ti clock, he was using the dtsi. One idea can be
> > understand if this approch
> > cost less in term of space in the
On Tue, Sep 27, 2022 at 02:00:14PM +0200, Patrice CHOTARD wrote:
> Hi Tom,
>
> Please pull the STM32 related fixes for u-boot/next, v2022.10:
> u-boot-stm32-20220927
>
> CI status:
> https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/13610
>
>
After commit 395110284b56 ("nitrogen6x: Populate FDTFILE at build-time
for all platforms") iMX.6Q Sabrelite fails to boot due to a bad fdtfile
string:
Retrieving file: /dtbs/5.18.0-0.deb11.4-armmp/"imx6q-sabrelite".dtb
** File not found /dtbs/5.18.0-0.deb11.4-armmp/"imx6q-sabrelite".dtb **
CO
Hi Ariel,
On Tue, Sep 27, 2022 at 11:14 AM Ariel D'Alessandro
wrote:
>
> After commit 395110284b56 ("nitrogen6x: Populate FDTFILE at build-time
> for all platforms") iMX.6Q Sabrelite fails to boot due to a bad fdtfile
> string:
>
> Retrieving file: /dtbs/5.18.0-0.deb11.4-armmp/"imx6q-sabrelite"
Hi Fabio,
On 9/27/22 11:20, Fabio Estevam wrote:
> Hi Ariel,
>
> On Tue, Sep 27, 2022 at 11:14 AM Ariel D'Alessandro
> wrote:
>>
>> After commit 395110284b56 ("nitrogen6x: Populate FDTFILE at build-time
>> for all platforms") iMX.6Q Sabrelite fails to boot due to a bad fdtfile
>> string:
>>
>>
After commit 395110284b56 ("nitrogen6x: Populate FDTFILE at build-time
for all platforms") iMX.6Q Sabrelite fails to boot due to a bad fdtfile
string:
Retrieving file: /dtbs/5.18.0-0.deb11.4-armmp/"imx6q-sabrelite".dtb
** File not found /dtbs/5.18.0-0.deb11.4-armmp/"imx6q-sabrelite".dtb **
CO
Some RK3399 boards, such as newer revisions of NanoPi R4S, do not
provide an EEPROM chip containing a globally unique MAC address.
Currently, this means that a randomly generated temporary MAC address
may be generated each time the device is rebooted, leading to ARP cache
issues and other confusin
> Following up with "[PATCH] rockchip: rk3399: add ethaddr and serial# init,
> enable for R4S", which enables these settings in
> configs/nanopi-r4s-rk3399_defconfig.
>
> This doesn't look any different from what you already sent.
>
> ChenYu
Following up with "[PATCH] rk3399: r4s: Derive local
Please disregard (duplicate patch)
Following up with "[PATCH] rk3399: r4s: Derive local MAC address if EEPROM is
missing".
Cheers,
Christian
From: Marcel Ziswiler
Update the distro config env memory layout for the Apalis iMX6,
Colibri iMX6, Colibri iMX6ULL and Colibri iMX7:
- loadaddr=0x8420 (resp. 0x1420 on them i.MX 6) allows for 64MB
area for uncompressing (ie FIT images)
- fdt_addr_r = loadaddr + 64MB : allows for 64MB
On Mon, Sep 26, 2022 at 08:47:47PM +, Alistair Delva wrote:
> The LLVM toolchain does not have or need libgcc, so do not require
> it to exist on the library path. Even if "-print-libgcc-file-name"
> returned the empty string, -lgcc would be specified.
>
> This leaves CONFIG_USE_PRIVATE_LIBGC
On Tue, Sep 27, 2022 at 2:14 AM Sughosh Ganu wrote:
>
> On Mon, 26 Sept 2022 at 20:12, Jassi Brar wrote:
> >
> > On Mon, Sep 26, 2022 at 5:00 AM Sughosh Ganu
> > wrote:
> > >
> > > On Mon, 26 Sept 2022 at 08:28, Jassi Brar
> > > wrote:
> > > >
> >
> > > >
> > > > .
> > > > > +/**
> > > >
Hi Tom,
On Tue, Sep 27, 2022 at 8:57 AM Tom Rini wrote:
>
> On Mon, Sep 26, 2022 at 08:47:47PM +, Alistair Delva wrote:
>
> > The LLVM toolchain does not have or need libgcc, so do not require
> > it to exist on the library path. Even if "-print-libgcc-file-name"
> > returned the empty string
On 9/27/2022 7:24 AM, Ariel D'Alessandro wrote:
> After commit 395110284b56 ("nitrogen6x: Populate FDTFILE at build-time
> for all platforms") iMX.6Q Sabrelite fails to boot due to a bad fdtfile
> string:
>
> Retrieving file: /dtbs/5.18.0-0.deb11.4-armmp/"imx6q-sabrelite".dtb
> ** File not fou
On Tue, Sep 27, 2022 at 09:29:51AM -0700, Alistair Delva wrote:
> Hi Tom,
>
> On Tue, Sep 27, 2022 at 8:57 AM Tom Rini wrote:
> >
> > On Mon, Sep 26, 2022 at 08:47:47PM +, Alistair Delva wrote:
> >
> > > The LLVM toolchain does not have or need libgcc, so do not require
> > > it to exist on t
On Tue, Sep 27, 2022 at 2:22 AM Sughosh Ganu wrote:
>
> On Mon, 26 Sept 2022 at 20:24, Jassi Brar wrote:
> >
> > On Mon, Sep 26, 2022 at 4:01 AM Sughosh Ganu
> > wrote:
> > > On Mon, 26 Sept 2022 at 08:25, Jassi Brar
> > > wrote:
> >
> > > > .
> > > > >
> > > > > +static __maybe_unused ef
On Tue, Sep 27, 2022 at 9:30 AM Alistair Delva wrote:
>
> Hi Tom,
>
> On Tue, Sep 27, 2022 at 8:57 AM Tom Rini wrote:
> >
> > On Mon, Sep 26, 2022 at 08:47:47PM +, Alistair Delva wrote:
> >
> > > The LLVM toolchain does not have or need libgcc, so do not require
> > > it to exist on the libra
On Friday 19 August 2022 10:20:46 Pali Rohár wrote:
> On Friday 19 August 2022 09:43:59 Stefan Roese wrote:
> > Testing on the theadorable Armada XP platform has shown, thaz using the
> > current value of 1000ms as response timeout does not result in reliable
> > booting via kwboot. Using 10ms seem
On Tue, Sep 27, 2022 at 12:41:15PM -0400, Tom Rini wrote:
> On Tue, Sep 27, 2022 at 09:29:51AM -0700, Alistair Delva wrote:
> > Hi Tom,
> >
> > On Tue, Sep 27, 2022 at 8:57 AM Tom Rini wrote:
> > >
> > > On Mon, Sep 26, 2022 at 08:47:47PM +, Alistair Delva wrote:
> > >
> > > > The LLVM toolch
On Tue, Sep 27, 2022 at 02:48:09PM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following watchdog related last minute fixes:
>
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
The description claims that the device is probed but it isn't.
Add the device_probe() call.
Also consolidate the iteration into one function.
Fixes: 8a5cbc065d ("dm: blk: Use uclass_find_first/next_device() in
blk_first/next_device()")
Signed-off-by: Michal Suchanek
---
Resent separately
dri
These functions use device_bind_with_driver_data internally, copy the
return value description.
Signed-off-by: Michal Suchanek
---
Resent separately
include/dm/lists.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/dm/lists.h b/include/dm/lists.h
index fc3b4ae585..97236f8fa0 1006
device_probe returns early when the device is already activated.
Add a note to the documentation that it can be used on already activated
devices.
Signed-off-by: Michal Suchanek
---
Resent separately
include/dm/device-internal.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --
pci_find_first_device description says it can be used for iteration with
itself but it should really be with pci_find_next_device
Signed-off-by: Michal Suchanek
---
Resent separately
include/pci.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/pci.h b/include/pci.h
uclass_probe_all uses uclass_first_device/uclass_next_device assigning
the return value.
The interface for getting meaningful error is
uclass_first_device_check/uclass_next_device_check, use it.
Also do not stop iteration when an error is encountered. Probing all
devices includes those that happe
We already have a function for probing all devices of a specific class,
use it.
Signed-off-by: Michal Suchanek
---
drivers/cpu/cpu-uclass.c | 20
drivers/virtio/virtio-uclass.c | 15 +--
test/dm/core.c | 17 +++--
test/test-main.
When there is no PCI bus uclass_first_device will return no bus and no
error which will result in pci_find_first_device calling
skip_to_next_device with no bus, and the bus is only checked at the end
of the while cycle, not the beginning.
Also stop dealing with the return value of
uclass_first_dev
bootdev_list() uses uclass_*_device_err() to iterate devices.
However, the only value _err adds is returning an error when the device
pointer is null, and that's checked anyway.
Also there is some intent to report errors, and that's what
uclass_*_device_check() is for, use it.
Also print the symb
There is a complaint in the code that iterates keyboards that we don't
have the _check variant of class iterator but we in fact do, use it.
In the code that iterates video devices there is an attempt to print
errors but the simple iterator does not return a device when there is an
error. Use the _
The code checks the return value from uclass_first_device as well as
that the device exists but it passes on the return value which may be
zero if there are no gadget devices. Just check that a device was
returned and return -ENODEV otherwise.
Also remove the dev variable which is not really used
There are a few commands that iterate uclass with
uclass_first_device/uclass_next_device or the _err variant.
Use the _check class iterator variant to get devices that fail to probe
as well, and print the status.
Signed-off-by: Michal Suchanek
---
cmd/adc.c | 22 ++
cm
The code checks that uclass_first_device returned a device but the
returned value that is assigned is never used. Use
uclass_first_device_err instead, and move the error return outside of
the if block.
Fixes: f4ec1ae08e ("mxc_ipuv3_fb.c: call display_enable")
Signed-off-by: Michal Suchanek
---
d
There are a couple users of uclass_next_device return value that get the
first device by other means and use uclass_next_device assuming the
following device in the uclass is related to the first one.
Use uclass_next_device_err because the return value from
uclass_next_device will be removed in a
There is a number of users that use uclass_first_device to access the
first and (assumed) only device in uclass.
Some check the return value of uclass_first_device and also that a
device was returned which is exactly what uclass_first_device_err does.
Some are not checking that a device was retur
blk_first_device_err/blk_next_device_err uses
uclass_first_device_err/uclass_next_device_err for device iteration.
Although the function names superficially match the return value from
uclass_first_device_err/uclass_next_device_err is never used
meaningfully, and uclass_first_device/uclass_next_de
uclass_first_device/uclass_next_device return value will be removed,
don't use it.
With the current implementation bus is equivalent to !ret. It i
redundant to check both, ret check can be replaced with bus check, and
ret check inside the iteration is dead code.
Signed-off-by: Michal Suchanek
--
Use uclass_first_device_check/uclass_next_device_check to correctly
count buses that fail to probe.
Fixes: d3e19cf919 ("w1: Add 1-Wire uclass")
Signed-off-by: Michal Suchanek
---
drivers/w1/w1-uclass.c | 20 +++-
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/driv
The _err variant iterators use the simple iterators without suffix as
basis.
However, there is no user that uclass_next_device_err for iteration,
many users of uclass_first_device_err use it to get the first and
(assumed) only device of an uclass, and a couple that use
uclass_next_device_err to ge
When probing a device fails NULL pointer is returned, and following
devices in uclass list cannot be iterated. Skip to next device on error
instead.
With that the only condition under which these simple iteration
functions return error is when the dm is not initialized at uclass_get
time. This is
On Mon, 26 Sept 2022 at 08:11, Stefan Roese wrote:
>
> Hi Simon,
> Hi Michal,
>
> On 25.09.22 16:15, Simon Glass wrote:
> > Hi Stefan,
> >
> > On Wed, 21 Sept 2022 at 08:06, Stefan Roese wrote:
> >>
> >> Currently this timer driver provides timer_get_boot_us() to support the
> >> BOOTSTAGE functi
Hi Stefan,
On Mon, 26 Sept 2022 at 07:52, Stefan Roese wrote:
>
> Hi Simon,
>
> On 25.09.22 16:15, Simon Glass wrote:
> > Hi Stefan,
> >
> > On Wed, 21 Sept 2022 at 08:06, Stefan Roese wrote:
> >>
> >> The early timer functions provided via CONFIG_TIMER_EARLY don't need
> >> CONFIG_TIMER to be e
Hi Alex,
On Mon, 26 Sept 2022 at 00:14, Alexander Dahl wrote:
>
> Hello Simon,
>
> Am Sun, Sep 25, 2022 at 08:15:38AM -0600 schrieb Simon Glass:
> > Hi Michal,
> >
> > On Thu, 22 Sept 2022 at 05:45, Michal Simek wrote:
> > >
> > >
> > >
> > > On 9/22/22 13:35, Simon Glass wrote:
> > > > Hi,
> >
On Tue, 27 Sept 2022 at 02:18, Patrick Delaunay
wrote:
>
> Remove prototype for the removed function fdt_fixup_nor_flash_size.
> This patch has no impact as the function is never used.
>
> Fixes: 98f705c9cefd ("powerpc: remove 4xx support")
> Signed-off-by: Patrick Delaunay
> ---
>
> include/fdt
1 - 100 of 106 matches
Mail list logo
