Kindly ignore the series
Regards,
Manorit
From: Chawdhry, Manorit
Sent: Wednesday, May 17, 2023 10:31:42 AM
To: Nagalla, Hari; Raghavendra, Vignesh; Brattlof, Bryan
Cc: Chawdhry, Manorit; u-boot@lists.denx.de; Kumar, Udit; Bajjuri, Praneeth;
Francis, Neha
We are moving towards the standard fit signature booting that requires
the following configs to be enabled, enable them in all k3 socs to allow
signed fit booting.
Signed-off-by: Manorit Chawdhry
---
boot/Kconfig | 3 +--
configs/am62ax_evm_a53_defconfig | 2 ++
Having saved environments usually causes inconsistencies while
development workflow. The saved environments conflict with the
default ones that uboot should be updating while development
but that doesn't happen and the saved environments need to be
reset during bootups to test the changes causing
Since moving towards distroboot, we need a way to boot using the legacy
methods too so keep the bootcmd consistent across devices to keep both
the flows running.
Signed-off-by: Manorit Chawdhry
---
configs/j7200_evm_a72_defconfig | 2 +-
configs/j721e_evm_a72_defconfig | 2 +-
Keeping this line in defconfigs doesn't allow the Kconfig values to be
reflected, remove these to enabled use of setexpr used for fit image
booting.
Signed-off-by: Manorit Chawdhry
---
configs/j7200_evm_a72_defconfig | 1 -
configs/j721e_evm_a72_defconfig | 1 -
Test results
http://lcpdresults.itg.ti.com/launcher/results/14057
Cc: u-boot@lists.denx.de
To: Hari Nagalla
To: Vignesh Raghavendra
To: Bryan Brattlof
Cc: Udit Kumar
Cc: Praneeth Bajjuri
Cc: Neha Malcom Francis
Signed-off-by: Manorit Chawdhry
---
Manorit Chawdhry (4):
configs:
On 5/16/23 15:08, Andre Przywara wrote:
This whole memory map is somewhat of a legacy. Apart from a few
addresses for the SPL needs we shouldn't have those defines at all.
Some symbols are needed because there are other macros using them,
although these then are eventually unused.
I have some
Hi Jonas,
On 2023/5/10 14:48, Jonas Karlman wrote:
Looks like the following two commits in your enablement efforts tree may
be a source of some of these dependency conflicts.
- rockchip: rk3588-rock-5b: Add spi nor flash node
- ARM: dts: rockchip: rk3588-rock-5b-u-boot: enable SPI flash in SPL
On 2023/5/15 21:44, Eugen Hristev wrote:
Add pinctrl driver in SPL. Do not remove pinctrl properties for SPL dtb.
Signed-off-by: Eugen Hristev
Reviewed-by: Kever Yang
Thanks,
- Kever
---
Changes in v4:
- rebased on master: Warning ! This is rebased on top of the USB 2.0 series !
Changes
On 2023/5/15 21:44, Eugen Hristev wrote:
To be able to initialize the pinctrl correctly at SPL level and read
u-boot proper from SD-Card, the pinctrl must be initialized.
Signed-off-by: Eugen Hristev
Reviewed-by: Kever Yang
Thanks,
- Kever
---
Changes in v4:
- rebased on latest master:
Hi Eugen,
On 2023/5/16 17:20, Eugen Hristev wrote:
On 5/6/23 12:44, Kever Yang wrote:
On 2023/4/27 15:35, Eugen Hristev wrote:
Add drivers for PCIe , phy, and command.
Signed-off-by: Eugen Hristev
Reviewed-by: Kever Yang
Thanks,
- Kever
---
Hi Kever,
Do you need me to resend this
Move the ethernet gadget driver registration and removal from ethernet
bind and unbind callbacks into driver DM probe and remove callbacks.
This way, when the driver is bound, which is triggered deliberately
using 'bind' command, the USB ethernet gadget driver is instantiated
and bound to the
Move the driver probe function above the driver structure, so it
can be placed alongside other related functions, like upcoming
remove function. No functional change.
Signed-off-by: Marek Vasut
---
Cc: Kevin Hilman
Cc: Lukasz Majewski
Cc: Marek Vasut
Cc: Simon Glass
---
These functions here are only ever called once since drop of non-DM
networking code. Inline them. No functional change.
Signed-off-by: Marek Vasut
---
Cc: Kevin Hilman
Cc: Lukasz Majewski
Cc: Marek Vasut
Cc: Simon Glass
---
drivers/usb/gadget/ether.c | 48
Extend the driver core to perform lookup by both OF node and driver
bound to the node. Use this to look up specific device instances to
unbind from nodes in the unbind command. One example where this is
needed is USB peripheral controller, which may have multiple gadget
drivers bound to it. The
On Tue, 16 May 2023 17:53:38 -0600
Sam Edwards wrote:
Hi Sam,
> On 5/16/23 15:08, Andre Przywara wrote:
> > This whole memory map is somewhat of a legacy. Apart from a few
> > addresses for the SPL needs we shouldn't have those defines at all.
> > Some symbols are needed because there are other
On Tue, 02 May 2023 12:23:01 +0200, Stefan Herbrechtsmeier wrote:
> From: Stefan Herbrechtsmeier
>
>
> When using a list of writeable variables, the initial values come from
> the built-in default environment since commit 5ab81058364b
> ("env: Complete generic support for writable list").
On Wed, May 17, 2023 at 01:48:49AM +0200, Marek Vasut wrote:
> The following changes since commit 5d0b3dde115b0d26d414199678983d01b738ad1b:
>
> Merge branch '2023-05-15-build-system-updates' into next (2023-05-15
> 15:26:54 -0400)
>
> are available in the Git repository at:
>
>
@Heinrich Some background information I discovered by experimenting with my vf2
board:
The only reasonable place to load SPL is the L2 LIM, which is 2M in size mapped
at
0x800. This region consists of 16 0x2 sized regions, each one can be
used as
either L2 cache way or SRAM (not
The following changes since commit 5d0b3dde115b0d26d414199678983d01b738ad1b:
Merge branch '2023-05-15-build-system-updates' into next (2023-05-15 15:26:54
-0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-sh.git next_gpio
for you to fetch
From: Nishanth Menon
In the first silicon revision of the am62x family of SoCs, the hardware
wakeup event cannot be used if software is unable to unlock the RTC
device within one second after boot. To work around this limitation
unlock RTC as soon as possible in the boot flow to maximize our
On Tuesday 16 May 2023 14:56:46 Tom Rini wrote:
> On Tue, May 16, 2023 at 08:52:23PM +0200, Pali Rohár wrote:
> > On Tuesday 16 May 2023 11:36:20 Tom Rini wrote:
> > > On Tue, May 16, 2023 at 09:04:27AM +0200, Pali Rohár wrote:
> > > > On Sunday 07 May 2023 22:36:16 Pali Rohár wrote:
> > > > > On
On Mon, 15 May 2023 20:52:23 -0600
Sam Edwards wrote:
Hi Sam,
> On 12/5/22 17:45, Andre Przywara wrote:
> > diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
> > index 3763ec3d2e4..1cda5e2 100644
> > --- a/arch/arm/mach-sunxi/board.c
> > +++
On 2023-05-16 21:13, Eugen Hristev wrote:
> On 5/16/23 20:38, Jonas Karlman wrote:
>> Hi Eugen,
>>
>> On 2023-05-16 17:06, Eugen Hristev wrote:
>>> Hi Jonas,
>>>
>>> On 5/9/23 14:16, Kever Yang wrote:
On 2023/4/22 09:23, Jonas Karlman wrote:
> Add sfc and flash node to device tree
On Mon, 15 May 2023 20:32:52 -0600
Sam Edwards wrote:
Hi Sam,
> Hi Andre! Thank you for your efforts on this patchset; I've been
> test-driving it a bit myself this week.
many thanks for having a look, that's much appreciated!
> On 12/5/22 17:45, Andre Przywara wrote:
>
> > +#define
On Sat, May 06, 2023 at 04:42:40PM +0200, Marek Vasut wrote:
> Define SPL_USB_ETH_RNDIS symbol to make it possible to select USB
> gadget ethernet support in SPL and U-Boot separately in Kconfig .
> Make use of the new symbols in gadget Makefile and move the rndis.o
> just below the now merged
On Sat, May 06, 2023 at 04:42:39PM +0200, Marek Vasut wrote:
> To avoid piling up all the various Kconfig symbols in one place, i.e.
> common/spl/Kconfig, move the USB Kconfig symbols into drivers/usb/ .
> This commit moves SPL_USB_GADGET and related symbols. Fix typo and
> rename SPL_USB_GADGET
On Sat, May 06, 2023 at 04:42:38PM +0200, Marek Vasut wrote:
> To avoid piling up all the various Kconfig symbols in one place, i.e.
> common/spl/Kconfig, move the USB Kconfig symbols into drivers/usb/ .
> This commit moves SPL_USB_STORAGE and matching SYS_USB_FAT_BOOT_PARTITION .
>
>
On Sat, May 06, 2023 at 04:42:37PM +0200, Marek Vasut wrote:
> To avoid piling up all the various Kconfig symbols in one place, i.e.
> common/spl/Kconfig, move the USB Kconfig symbols into drivers/usb/ .
> This commit moves SPL_USB_HOST and updates help text of both USB_HOST
> and SPL_USB_HOST .
On Mon, May 15, 2023 at 1:10 PM Vincent Fazio wrote:
>
> All
>
> > -Original Message-
> > From: Stefan Wahren
> > Sent: Sunday, May 14, 2023 1:55 PM
> > To: Nuno Gonçalves ; u-boot@lists.denx.de; Vincent
> > Fazio ; pbrobin...@gmail.com
> > Subject: [External] - Re: Issues with
On 5/16/23 21:33, Bo Gan wrote:
On 5/16/23 6:11 AM, Heinrich Schuchardt wrote:
The size of SPL including the 1 KiB header added by spl_tool may not
exceed
128 KiB. Without the header this leaves 127 KiB for spl/u-boot-spl.bin.
We should check this value when building to avoid oversized
On 5/16/23 6:11 AM, Heinrich Schuchardt wrote:
The size of SPL including the 1 KiB header added by spl_tool may not exceed
128 KiB. Without the header this leaves 127 KiB for spl/u-boot-spl.bin.
We should check this value when building to avoid oversized binaries.
+CONFIG_SPL_SIZE_LIMIT=0x1fc00
On 5/16/23 20:38, Jonas Karlman wrote:
Hi Eugen,
On 2023-05-16 17:06, Eugen Hristev wrote:
Hi Jonas,
On 5/9/23 14:16, Kever Yang wrote:
On 2023/4/22 09:23, Jonas Karlman wrote:
Add sfc and flash node to device tree and config options to enable
support for booting from SPI NOR flash on
PING?
Another patch mentioned today which stay there for more than 8 months?
On Tuesday 02 August 2022 12:06:55 Pali Rohár wrote:
> Remove identify wrapper functions.
>
> Signed-off-by: Pali Rohár
> ---
> drivers/gpio/gpio-rcar.c | 15 ++-
> 1 file changed, 2 insertions(+), 13
On Tue, May 16, 2023 at 08:52:23PM +0200, Pali Rohár wrote:
> On Tuesday 16 May 2023 11:36:20 Tom Rini wrote:
> > On Tue, May 16, 2023 at 09:04:27AM +0200, Pali Rohár wrote:
> > > On Sunday 07 May 2023 22:36:16 Pali Rohár wrote:
> > > > On Sunday 07 May 2023 12:45:11 Tom Rini wrote:
> > > > > On
On Tue, May 16, 2023 at 06:18:56AM +, Christophe Leroy wrote:
>
>
> Le 15/05/2023 à 23:12, Tom Rini a écrit :
> > On Fri, May 05, 2023 at 10:39:39AM +0200, Christophe Leroy wrote:
> >
> >> A lot of errors are encountered when building with sparse checking
> >> activated (make C=1 or make
On Tuesday 16 May 2023 11:36:20 Tom Rini wrote:
> On Tue, May 16, 2023 at 09:04:27AM +0200, Pali Rohár wrote:
> > On Sunday 07 May 2023 22:36:16 Pali Rohár wrote:
> > > On Sunday 07 May 2023 12:45:11 Tom Rini wrote:
> > > > On Sun, May 07, 2023 at 04:56:04PM +0200, Pali Rohár wrote:
> > > > > On
OMAP2PLUS and BCM283X mmc controllers do not work correctly with new emmc
code which reads partition access bits prior mmc controller reset.
So introduce a new config option MMC_ENABLE_PART_ACCESS, which is by
default disabled for ARCH_OMAP2PLUS and ARCH_BCM283X; and selected for
32-bit mvebu mmc
On Tue, May 16, 2023 at 08:37:28AM +0200, Heinrich Schuchardt wrote:
> Dear Tom,
>
> The following changes since commit e94fbdd2729fdcd570035d43f67adda8e0dfc115:
>
> Merge https://source.denx.de/u-boot/custodians/u-boot-x86 (2023-05-11
> 08:40:33 -0400)
>
> are available in the Git
Hi Eugen,
On 2023-05-16 17:06, Eugen Hristev wrote:
> Hi Jonas,
>
> On 5/9/23 14:16, Kever Yang wrote:
>>
>> On 2023/4/22 09:23, Jonas Karlman wrote:
>>> Add sfc and flash node to device tree and config options to enable
>>> support for booting from SPI NOR flash on Radxa ROCK 5 Model B.
>>>
>>>
* loady may return $? = 1.
* Move misplaced description
Signed-off-by: Heinrich Schuchardt
---
doc/usage/cmd/loady.rst | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/doc/usage/cmd/loady.rst b/doc/usage/cmd/loady.rst
index 718af6e128..3f8227ecf2 100644
---
Provide a man-page for the loadx command.
Signed-off-by: Heinrich Schuchardt
---
doc/usage/cmd/loadx.rst | 77 +
doc/usage/index.rst | 1 +
2 files changed, 78 insertions(+)
create mode 100644 doc/usage/cmd/loadx.rst
diff --git
Provide a man-page for the loadb command.
Signed-off-by: Heinrich Schuchardt
---
doc/usage/cmd/loadb.rst | 70 +
doc/usage/index.rst | 1 +
2 files changed, 71 insertions(+)
create mode 100644 doc/usage/cmd/loadb.rst
diff --git
On Tue, May 16, 2023 at 09:04:27AM +0200, Pali Rohár wrote:
> On Sunday 07 May 2023 22:36:16 Pali Rohár wrote:
> > On Sunday 07 May 2023 12:45:11 Tom Rini wrote:
> > > On Sun, May 07, 2023 at 04:56:04PM +0200, Pali Rohár wrote:
> > > > On Sunday 07 May 2023 10:40:44 Tom Rini wrote:
> > > > > On
Hi Ilias,
I think we can address Heinrich's comments in a follow up patch set.
The concerns are more related to refactoring on the logic of existing
functions and less to the functionality we want to enable with these
patches.
Thanks.
Regards,
Raymond
On Tue, 16 May 2023 at 01:58, Ilias
Hi Ilias,
On Tue, 16 May 2023 at 01:57, Ilias Apalodimas
wrote:
> Hi Raymond,
>
> On Tue, May 02, 2023 at 12:12:21PM -0700, Raymond Mao wrote:
> > The boot variables automatically generated for removable medias
> > should be with short form of device path without device nodes.
> > This is a
Hi Ilias,
On Tue, 16 May 2023 at 01:59, Ilias Apalodimas
wrote:
> On Tue, May 02, 2023 at 12:12:19PM -0700, Raymond Mao wrote:
> > Changes for complying to EFI spec §3.5.1.1
> > 'Removable Media Boot Behavior'.
> > Boot variables can be automatically generated during a removable
> > media is
On Tue, May 16, 2023 at 12:11:24PM +0530, Manorit Chawdhry wrote:
> Hi All,
>
> I recently came upon a discussion that had happened a while back [0].
> I want to continue the discussion as I believe the issue still persists
> and the checks around fit signature booting are still the same, that
>
On Thu, May 11, 2023 at 08:16:49AM +0200, Christophe Leroy wrote:
> After converting my targets from CFG_EXTRA_ENV_SETTINGS to
> CONFIG_EXTRA_ENV_TEXT as suggested by Tom, I discovered that
> fw_setenv doesn't set the entire defaut environment anymore.
>
> I tried to fix it with the below patch,
On Thu, May 11, 2023 at 04:36:52PM +0200, Patrick Delaunay wrote:
> From: Raphael Gallais-Pou
>
> In case where a single timing resolution is implemented in the
> device-tree, the property is named "panel-timing", as specify
> in Linux kernel binding file:
>
>
On Mon, May 15, 2023 at 12:22:42PM +0530, Manorit Chawdhry wrote:
> During refactor this seemed to have been missed.
>
> Fixes: 65dbb128fb45 ("include: environment: ti: Use .env for environment
> variables")
>
> Signed-off-by: Manorit Chawdhry
Applied to u-boot/master, thanks!
--
Tom
On Wed, May 10, 2023 at 11:48:44PM +0200, Johan Jonker wrote:
> For the devfdt_get_addr_size_index_ptr() function use
> map_sysmem() function as cast for the return for use in
> sandbox.
>
> Signed-off-by: Johan Jonker
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP
On Tue, May 09, 2023 at 12:02:50PM +0100, John Keeping wrote:
> Make it clear that this is the SPL option to avoid potential confusion
> when the description for CONFIG_SPL_VIDEO is the same as that for
> CONFIG_VIDEO.
>
> Signed-off-by: John Keeping
Applied to u-boot/master, thanks!
--
Tom
On Tue, May 09, 2023 at 09:05:47PM +0200, Henrik Grimler wrote:
> Otherwise non-ChromeOS samsung devices, like the odroid boards, are
> stuck in a bootloop if CONFIG_CROS_EC is not enabled:
>
> <...>
> MMC: SAMSUNG SDHCI: 2, EXYNOS DWMMC: 0
> Loading Environment from MMC... ***
On Tue, May 09, 2023 at 09:05:46PM +0200, Henrik Grimler wrote:
> This reverts commit a034ec06ff1d558bbe11d5ee05edbb4de3ee2215.
>
> Commit 4a3ea75de4c5 ("Revert "mmc: sdhci: set to INT_DATA_END when
> there are data"") reverted the alternative fix that was added for
> Exynos 4 devices, causing
On Tue, May 16, 2023 at 02:59:29PM +0200, Michal Simek wrote:
> Hi Tom,
>
> please pull these changes to your tree.
> CI is not showing any issue.
> https://source.denx.de/u-boot/custodians/u-boot-microblaze/-/pipelines/16372
>
> Thanks,
> Michal
>
> The following changes since commit
On Tue, May 16, 2023 at 04:15:18PM +0300, Eugen Hristev wrote:
> On 5/16/23 16:09, Tom Rini wrote:
> > On Tue, May 16, 2023 at 04:08:10PM +0300, Eugen Hristev wrote:
> > > On 5/15/23 21:01, Tom Rini wrote:
> > > > As part of various code clean-ups we have on occasion missed removing
> > > > unused
Hi Jonas,
On 5/9/23 14:16, Kever Yang wrote:
On 2023/4/22 09:23, Jonas Karlman wrote:
Add sfc and flash node to device tree and config options to enable
support for booting from SPI NOR flash on Radxa ROCK 5 Model B.
Signed-off-by: Jonas Karlman
Reviewed-by: Kever Yang
Thanks,
- Kever
Read boodmode register using versal_net_get_bootmode() in board_late_init
and prepare corresponding distro boot command sequence based on it.
versal_net_get_bootmode() will be changed to use smc calls later, but
for now directly reads the register.
Signed-off-by: Ashok Reddy Soma
---
Changes
From: Stefan Herbrechtsmeier
The card detect logic needs a short card present signal to work
dependable. Without a present card the SDHCI_CARD_STATE_STABLE signal is
not set dependable after a reset. Use the internal fixed card present
signal to initiate the card detect logic.
Signed-off-by:
From: Stefan Herbrechtsmeier
Move the permission to change a config object message from
zynqmp_pmufw_load_config_object function to zynqmp_pmufw_node function
to simplify the code and check the permission only if required.
Signed-off-by: Stefan Herbrechtsmeier
---
Changes in v4:
- Reword
-
From: Stefan Herbrechtsmeier
Return a common -EACCES error value instead of a positive private error
value XST_PM_NO_ACCESS (2002) in zynqmp_pmufw_load_config_object
function if the config object is not loadable to simplify the error
checking.
Signed-off-by: Stefan Herbrechtsmeier
---
(no
On 2/13/23 09:43, Leo Yu-Chi Liang wrote:
From: Xiang W
The maximum hart number is 32 and is determined by
the type of gd->arch.available_harts. However, various
RISC-V specifications allow the hart number to be greater
than 32. We can eliminate this limitation through bitmaps.
The patch
On 5/16/23 16:09, Tom Rini wrote:
On Tue, May 16, 2023 at 04:08:10PM +0300, Eugen Hristev wrote:
On 5/15/23 21:01, Tom Rini wrote:
As part of various code clean-ups we have on occasion missed removing
unused header files. None of these files are referenced anywhere else
at this point.
The size of SPL including the 1 KiB header added by spl_tool may not exceed
128 KiB. Without the header this leaves 127 KiB for spl/u-boot-spl.bin.
We should check this value when building to avoid oversized binaries.
Signed-off-by: Heinrich Schuchardt
---
On Tue, May 16, 2023 at 04:08:10PM +0300, Eugen Hristev wrote:
> On 5/15/23 21:01, Tom Rini wrote:
> > As part of various code clean-ups we have on occasion missed removing
> > unused header files. None of these files are referenced anywhere else
> > at this point.
> >
> > Signed-off-by: Tom
On 5/15/23 21:01, Tom Rini wrote:
As part of various code clean-ups we have on occasion missed removing
unused header files. None of these files are referenced anywhere else
at this point.
Signed-off-by: Tom Rini
---
arch/arm/include/asm/arch-bcmcygnus/configs.h | 18 -
Hi Tom,
please pull these changes to your tree.
CI is not showing any issue.
https://source.denx.de/u-boot/custodians/u-boot-microblaze/-/pipelines/16372
Thanks,
Michal
The following changes since commit 177e506952a8ee34011590c4bd578d191fafb1ca:
Merge branch
On 5/16/23 13:49, Josua Mayer wrote:
Hi Heinrich,
Am 16.05.23 um 14:21 schrieb Heinrich Schuchardt:
On 5/16/23 10:27, Josua Mayer wrote:
populate_serial_number is not used internally for the tlv_eeprom
command, but rather provided as a library function for external use..
Remove the devnum
Stefan
> -Original Message-
> From: Stefan Wahren
> Sent: Tuesday, May 16, 2023 12:54 AM
> To: Vincent Fazio ; Nuno Gonçalves
> ; u-boot@lists.denx.de; pbrobin...@gmail.com
> Subject: Re: [External] - Re: Issues with bcm2835-host: let firmware manage
> the clock divisor
>
> Am 15.05.23
For sf commands, when '0' length is passed for erase, update, write or
read, there might be undesired results. Ideally '0' length means nothing to
do.
So print 'ERROR: Invalid size 0' and return cmd failure when length '0' is
passed to sf commands. Same thing applies for nand commands also.
Hi Heinrich,
Am 16.05.23 um 14:21 schrieb Heinrich Schuchardt:
On 5/16/23 10:27, Josua Mayer wrote:
populate_serial_number is not used internally for the tlv_eeprom
command, but rather provided as a library function for external use..
Remove the devnum that had recently been added by mistake,
On 5/16/23 13:23, Stefan Herbrechtsmeier wrote:
Hi,
Am 16.05.2023 um 10:26 schrieb Michal Simek:
Hi,
first of all sorry for delay.
On 4/27/23 12:31, Stefan Herbrechtsmeier wrote:
From: Stefan Herbrechtsmeier
Move the check of the permission to change a config object from
Rewrite tlv_eeprom command for using the new tlv library, and drop all
unused functions. From this point on, tlv_eeprom command internal
functions shall not be reused externally.
mac_read_from_eeprom & populate_serial_number are kept in place for now
as is, however these probably deserve a new
Create a new tlv library by rewriting parts, and reusing other parts of
the tlv_eeprom command. This library is intended to simplify reading tlv
data during system initialisation from board files, as well as increase
maintainability by defining a clear API and functionally decouple from
the
Update the existing code reading tlv data from eeprom to use the new tlv
library functions rather than relying on tlv_eeprom command internals.
Signed-off-by: Josua Mayer
---
board/solidrun/common/tlv_data.c | 46
configs/clearfog_defconfig | 4 ++-
2
The existing tlv_eeprom functionality has been designed as a single
application living as a uboot command.
The split into individual library and command, as well as attempts using
this functionality extensively for board-identification have revealed
several short-comings, such as:
- Inconsistent
On 12/5/22 17:45, Andre Przywara wrote:
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index 3763ec3d2e4..1cda5e2 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -148,6 +148,10 @@ static int gpio_init(void)
Hi Andre! Thank you for your efforts on this patchset; I've been
test-driving it a bit myself this week.
On 12/5/22 17:45, Andre Przywara wrote:
+#define SUNXI_RTC_BASE 0x0700
+#define SUNXI_R_CPUCFG_BASE0x07000400
+#define SUNXI_PRCM_BASE
On 5/14/23 09:28, Tom Rini wrote:
Hi Tom!
How extensively have you tested this change?
I tested it in building for the arm/sunxi target. U-Boot does not build
at all (on Clang+LLD) in its current state:
ld.lld: error: section type mismatch for .gnu.version_r
>>> :(.gnu.version_r):
On 5/15/23 03:48, Andre Przywara wrote:
Ahoy, Andre!
> How did you find this? Just by accident? I was wondering if we could
> check the tree automatically for those accidents.
I found it both automatically and by accident. :)
My cross-compiler of choice is Clang (as I don't have to
Hi,
Am 16.05.2023 um 10:26 schrieb Michal Simek:
Hi,
first of all sorry for delay.
On 4/27/23 12:31, Stefan Herbrechtsmeier wrote:
From: Stefan Herbrechtsmeier
Move the check of the permission to change a config object from
zynqmp_pmufw_node function to zynqmp_pmufw_load_config_object
Hello u-boot experts,
On qemu arm64 virt machine, I can start u-boot-spl and it loads
u-boot(proper) from RAM ( CONFIG_SPL_RAM_SUPPORT=y, CONFIG_SPL_RAM_DEVICE=y)
and executes it.
Previously I have used u-boot-spl and used falcon mode to jump directly to
linux on qemu virt machine and on actual
On 5/16/23 10:27, Josua Mayer wrote:
populate_serial_number is not used internally for the tlv_eeprom
command, but rather provided as a library function for external use..
Remove the devnum that had recently been added by mistake, returning the
function to its original signature.
Instead place
On 5/6/23 12:44, Kever Yang wrote:
On 2023/4/27 15:35, Eugen Hristev wrote:
Add drivers for PCIe , phy, and command.
Signed-off-by: Eugen Hristev
Reviewed-by: Kever Yang
Thanks,
- Kever
---
Hi Kever,
Do you need me to resend this series as well ?
If you need help in applying, or
Currently, all in-tree .dts files (apart from some under test/ and
tools/), reside in arch/$ARCH/dts. However, in the linux kernel tree,
dts files for arm64 boards, and probably in the not too distant
future [1], arm boards as well, live in subdirectories of that.
For private forks, using a
populate_serial_number is not used internally for the tlv_eeprom
command, but rather provided as a library function for external use..
Remove the devnum that had recently been added by mistake, returning the
function to its original signature.
Instead place a 0-initialised member variable inside
Hi,
first of all sorry for delay.
On 4/27/23 12:31, Stefan Herbrechtsmeier wrote:
From: Stefan Herbrechtsmeier
Move the check of the permission to change a config object from
zynqmp_pmufw_node function to zynqmp_pmufw_load_config_object function
to simplify the code and check the permission
Hello all,
I found by compiling u-boot-spl to start at 0x4020 and using -kernel
option, I can make u-boot-spl start loaded and started from 0x4020. And
then by loading the .itb file (FIT file) which contains u-boot proper binary at
0x4040 using -device loader option, and setting
Happy Birthday for this patch?
On Monday 16 May 2022 11:01:19 Pali Rohár wrote:
> CZ.NIC Turris 1.0 and 1.1 are open source routers, they have dual-core
> PowerPC Freescale P2020 CPU and are based on Freescale P2020RDB-PC-A board.
>
> Hardware design is fully open source, all firmware and
On Sunday 07 May 2023 22:36:16 Pali Rohár wrote:
> On Sunday 07 May 2023 12:45:11 Tom Rini wrote:
> > On Sun, May 07, 2023 at 04:56:04PM +0200, Pali Rohár wrote:
> > > On Sunday 07 May 2023 10:40:44 Tom Rini wrote:
> > > > On Sun, May 07, 2023 at 04:01:04PM +0200, Pali Rohár wrote:
> > > > > On
On 2023/5/12 13:50, Bo Gan wrote:
> On 3/28/23 8:42 PM, Yanhong Wang wrote:
>> +void harts_early_init(void)
>> +{
>> + ulong *ptr;
>> + u8 *tmp;
>> + ulong len, remain;
>> + /*
>> + * Feature Disable CSR
>> + *
>> + * Clear feature disable CSR to '0' to turn on all
Hi All,
I recently came upon a discussion that had happened a while back [0].
I want to continue the discussion as I believe the issue still persists
and the checks around fit signature booting are still the same, that
allows booting the fit without changing the uboot dtb.
Allowing the signed
Dear Tom,
The following changes since commit e94fbdd2729fdcd570035d43f67adda8e0dfc115:
Merge https://source.denx.de/u-boot/custodians/u-boot-x86 (2023-05-11
08:40:33 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-efi.git
tags/efi-2023-07-rc3
Le 15/05/2023 à 23:12, Tom Rini a écrit :
> On Fri, May 05, 2023 at 10:39:39AM +0200, Christophe Leroy wrote:
>
>> A lot of errors are encountered when building with sparse checking
>> activated (make C=1 or make C=2).
>>
>> Many of them are fixed in Linux.
>>
>> Resynchronise Makefile and
95 matches
Mail list logo