Neural Compute Module 6B(Neu6B) is a 96boards SoM-CB compute module
based on Rockchip RK3588J from Edgeble AI.
Add support for this SoM and IO board.
Signed-off-by: Jagan Teki
---
.../dts/rk3588-edgeble-neu6b-io-u-boot.dtsi | 22 +++
arch/arm/mach-rockchip/rk3588/Kconfig | 10 +++
Neural Compute Module 6B(Neu6B) is a 96boards SoM-CB compute module
based on Rockchip RK3588J from Edgeble AI.
General features:
- Rockchip RK3588J
- up to 32GB LPDDR4x
- up to 128GB eMMC
- 2x MIPI CSI2 FPC
- On module WiFi6/BT
Neural Compute Module 6B(Neu6B) IO board is an industrial form factor
Add rk3588j-u-boot.dtsi for adding U-Boot specific nodes and
properties for Rockchip RK3588J SoC.
Signed-off-by: Jagan Teki
---
arch/arm/dts/rk3588j-u-boot.dtsi | 6 ++
1 file changed, 6 insertions(+)
create mode 100644 arch/arm/dts/rk3588j-u-boot.dtsi
diff --git a/arch/arm/dts/rk3588j-u-b
Rockchip RK3588J is the industrial-grade version of RK3588 SoC and
is operated with -40 °C to +85 °C temparature.
Add rk3588j specific dtsi for adding rk3588j specific operating points
and other changes to be add in future.
Kernel commit:
commit <8274a04ff1dc> ("arm64: dts: rockchip: Add Rockchip
Add missing suffix 'A' for Edgeble Neu6A SoM and IO boards.
Fixes: <15b2d1fb727> ("board: rockchip: Add Edgeble Neural Compute
Module 6")
Signed-off-by: Jagan Teki
---
arch/arm/mach-rockchip/rk3588/Kconfig | 10 +-
doc/board/rockchip/rockchip.rst | 2 +-
2 files changed, 6 inserti
On Sat, Jun 10, 2023 at 03:38:07PM +0200, Marek Vasut wrote:
> The following changes since commit 5f41ef792c307dedc12647cdde2ade273aa11805:
>
> Merge branch '2023-06-09-fwu-updates' into next (2023-06-09 20:35:02 -0400)
>
> are available in the Git repository at:
>
> https://source.denx.de/
On Sat, Jun 10, 2023 at 03:37:23PM +0200, Marek Vasut wrote:
> The following changes since commit 5f41ef792c307dedc12647cdde2ade273aa11805:
>
> Merge branch '2023-06-09-fwu-updates' into next (2023-06-09 20:35:02 -0400)
>
> are available in the Git repository at:
>
> https://source.denx.de/
Test ReinstallProtocolInterface() more rigorously.
Replacing the sole installed protocol interface must not result in deleting
the handle and creating a new one.
Check which interface is actually installed before and after
ReinstallProtocolInterface().
Signed-off-by: Heinrich Schuchardt
---
v2:
Test ReinstallProtocolInterface() more rigorously.
Replacing the sole installed protocol interface must not result in deleting
the handle and creating a new one.
Check which interface is actually installed before and after
ReinstallProtocolInterface().
Signed-off-by: Heinrich Schuchardt
---
..
On Tue, Feb 14, 2023 at 10:20 AM Jim Liu wrote:
>
> Add bb_miiphy_bus function for designware bitbang feature.
>
> Signed-off-by: Jim Liu
> ---
> drivers/net/designware.c | 109 ++-
> drivers/net/designware.h | 3 ++
> 2 files changed, 111 insertions(+), 1 d
The following changes since commit addd47379df54a3eb247c6db4f799f14af43e523:
Merge https://source.denx.de/u-boot/custodians/u-boot-usb (2023-06-08
18:23:06 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-sh.git master_reserved
for you to fetch
Hi Simon,
In commit 32bab0eae51 you added a
#define ansi 0
and put the code that positions the cursor to print the "Hit any key
to stop autoboot" message behind an
if (ansi)
condition. As a result that message is now printed in whatever place
the cursor happens to be, which happens to be
On Fri, Jun 9, 2023 at 10:41 AM Detlev Casanova
wrote:
>
> The function fdtdec_board_setup() is called early and adds the overlay
> from ATF to the u-boot device tree. That is necessary so that u-boot
> doesn't use reserved memory.
>
> Linux also needs to know about that reserved memory so the ove
The following changes since commit 5f41ef792c307dedc12647cdde2ade273aa11805:
Merge branch '2023-06-09-fwu-updates' into next (2023-06-09 20:35:02 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-sh.git
next_net/phy_connect_dev
for you to fetch
The following changes since commit 5f41ef792c307dedc12647cdde2ade273aa11805:
Merge branch '2023-06-09-fwu-updates' into next (2023-06-09 20:35:02 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-sh.git next_mtd/rpc-spi
for you to fetch changes u
On 6/9/23 17:19, Detlev Casanova wrote:
The function fdtdec_board_setup() is called early and adds the overlay
from ATF to the u-boot device tree. That is necessary so that u-boot
doesn't use reserved memory.
Linux also needs to know about that reserved memory so the overlay from
ATF needs to be
On 6/9/23 18:00, Detlev Casanova wrote:
The Renesas R-Car Gen3 H3e (Starter Kit Premier) uses a different
device tree than the default one.
This uses the sysinfo's board id to determine if the board needs a
specific device tree.
Signed-off-by: Detlev Casanova
---
board/renesas/ulcb/ulcb.c
On 6/9/23 18:00, Detlev Casanova wrote:
This is a preparation commit for selecting the correct device tree name
to be loaded depending on the board id.
I am not opposed to this patch itself (with a few tweaks, see below),
but please see 2/2, I suspect this method of selecting the DT is not
go
From: Hai Pham
When tuning command (CMD21) fails with command error, call
mmc_send_stop_transmission() to send stop command (CMD12).
Reviewed-by: Takeshi Kihara
Reviewed-by: Marek Vasut
Signed-off-by: Hai Pham
Signed-off-by: Marek Vasut
[Marek: Add dev_dbg() message in case tuning abort fail
From: Hai Pham
If a tuning command times out, the card could still be processing it,
which will cause problems for recovery. The eMMC specification section
6.6 Data transfer mode (cont’d) claims that CMD12 can be used to stop
CMD21:
"
The relationship between the various data transfer modes is su
From: Valentine Barshak
Set MMC clock when reverting to safe bus mode and speed
in case current MMC mode fails. Otherwise, trying out
the other modes may fail as well.
Reviewed-by: Marek Vasut
Signed-off-by: Valentine Barshak
[hp: fallback to legacy_speed]
Signed-off-by: Hai Pham
---
Cc: "Yin
On Wed, May 31, 2023 at 4:19 AM Peng Fan wrote:
>
> Hi Joe, Ramon
>
> I see this patchset is delegated to me, would you take care this
> patchset or let me handle?
>
> Thanks,
> Peng.
>
> On 5/23/2023 9:47 PM, Ioana Ciornei wrote:
>
> >
> >
> > This patch set extends the 'net' command so that it c
On Wed, May 31, 2023 at 1:51 AM Marek Vasut
wrote:
>
> From: Valentine Barshak
>
> In case RX error occurs, and the RD_RFE bit is set, the descriptor
> is never returned back to the queue. Make sh_eth_recv_start return
> zero length in this case so that the descriptor can be released
> and pushed
On Wed, May 31, 2023 at 1:51 AM Marek Vasut
wrote:
>
> From: Valentine Barshak
>
> U-Boot writes to RX packets when constructing replies.
> This can cause stale cached data to be written to RX
> buffer while we're receiving a packet. This causes RX
> packet corruption because we invalidate the ca
On Wed, May 31, 2023 at 1:51 AM Marek Vasut
wrote:
>
> The common code is now capable of handling reset GPIO associated
> with PHY. Drop the local ad-hoc code in favor of common code.
>
> Signed-off-by: Marek Vasut
> ---
> Cc: Geert Uytterhoeven
> Cc: Joe Hershberger
> Cc: Michal Simek
> Cc: N
On Wed, May 31, 2023 at 1:51 AM Marek Vasut
wrote:
>
> The common code is now capable of handling reset GPIO associated
> with PHY. Drop the local ad-hoc code in favor of common code.
>
> Signed-off-by: Marek Vasut
> ---
> Cc: Geert Uytterhoeven
> Cc: Joe Hershberger
> Cc: Michal Simek
> Cc: N
On Wed, May 31, 2023 at 1:51 AM Marek Vasut
wrote:
>
> These two properties are used by various DTs in place of
> current reset-assert-us/reset-deassert-us , handle both .
>
> Signed-off-by: Marek Vasut
> ---
> Cc: Geert Uytterhoeven
> Cc: Joe Hershberger
> Cc: Michal Simek
> Cc: Nishanth Meno
On Wed, May 31, 2023 at 1:51 AM Marek Vasut
wrote:
>
> In case a new PHY is created and DM_ETH_PHY is enabled, bind a
> generic PHY driver from ETH_PHY uclass to the PHY to have a
> matching DM representation of that PHY.
>
> Signed-off-by: Marek Vasut
> ---
> Cc: Geert Uytterhoeven
> Cc: Joe He
On Wed, May 31, 2023 at 1:51 AM Marek Vasut
wrote:
>
> The phy_connect_dev() is legacy API, now that there are no users,
> make it internal to phy.c and unpublish it from headers.
>
> Signed-off-by: Marek Vasut
> ---
> Cc: Geert Uytterhoeven
> Cc: Joe Hershberger
> Cc: Michal Simek
> Cc: Nisha
On Wed, May 31, 2023 at 1:51 AM Marek Vasut
wrote:
>
> Use new U-Boot phy_connect() API which also supports fixed PHYs.
>
> Signed-off-by: Marek Vasut
> ---
> Cc: Geert Uytterhoeven
> Cc: Joe Hershberger
> Cc: Michal Simek
> Cc: Nishanth Menon
> Cc: Ramon Fried
> ---
> drivers/net/sunxi_ema
On Wed, May 31, 2023 at 1:51 AM Marek Vasut
wrote:
>
> Use new U-Boot phy_connect() API which also supports fixed PHYs.
>
> Signed-off-by: Marek Vasut
> ---
> Cc: Geert Uytterhoeven
> Cc: Joe Hershberger
> Cc: Michal Simek
> Cc: Nishanth Menon
> Cc: Ramon Fried
> ---
> drivers/net/sh_eth.c
On Wed, May 31, 2023 at 1:51 AM Marek Vasut
wrote:
>
> Use new U-Boot phy_connect() API which also supports fixed PHYs.
>
> Signed-off-by: Marek Vasut
> ---
> Cc: Geert Uytterhoeven
> Cc: Joe Hershberger
> Cc: Michal Simek
> Cc: Nishanth Menon
> Cc: Ramon Fried
> ---
> drivers/net/pch_gbe.c
On Wed, May 31, 2023 at 1:51 AM Marek Vasut
wrote:
>
> Use new U-Boot phy_connect() API which also supports fixed PHYs.
>
> Signed-off-by: Marek Vasut
> ---
> Cc: Geert Uytterhoeven
> Cc: Joe Hershberger
> Cc: Michal Simek
> Cc: Nishanth Menon
> Cc: Ramon Fried
> ---
> drivers/net/ethoc.c |
On Wed, May 31, 2023 at 1:51 AM Marek Vasut
wrote:
>
> Use new U-Boot phy_connect() API which also supports fixed PHYs.
>
> Signed-off-by: Marek Vasut
> ---
> Cc: Geert Uytterhoeven
> Cc: Joe Hershberger
> Cc: Michal Simek
> Cc: Nishanth Menon
> Cc: Ramon Fried
> ---
> drivers/net/sni_ave.c
On Wed, May 31, 2023 at 1:51 AM Marek Vasut
wrote:
>
> Use new U-Boot phy_connect() API which also supports fixed PHYs.
>
> Signed-off-by: Marek Vasut
> ---
> Cc: Geert Uytterhoeven
> Cc: Joe Hershberger
> Cc: Michal Simek
> Cc: Nishanth Menon
> Cc: Ramon Fried
> ---
> drivers/net/altera_ts
On Wed, May 31, 2023 at 1:51 AM Marek Vasut
wrote:
>
> The eth_phy_reset() is not used outside of this file, staticize it.
> No functional change.
>
> Signed-off-by: Marek Vasut
> ---
> Cc: Geert Uytterhoeven
> Cc: Joe Hershberger
> Cc: Michal Simek
> Cc: Nishanth Menon
> Cc: Ramon Fried
> -
On Tue, May 23, 2023 at 4:48 PM Ioana Ciornei wrote:
>
> Export the already existing DPNI and DPMAC counters through the newly
> added callbacks.
>
> Signed-off-by: Ioana Ciornei
> ---
> drivers/net/ldpaa_eth/ldpaa_eth.c | 44 ---
> 1 file changed, 40 insertions(+), 4
On Tue, May 23, 2023 at 4:48 PM Ioana Ciornei wrote:
>
> Add a new option to the 'net' command which can be used to dump network
> statistics.
>
> To do this, 3 new callbacks are added to the eth_ops structure:
> .get_sset_count(), .get_strings(), .get_stats(). These callbacks
> have the same func
On Tue, May 23, 2023 at 4:48 PM Ioana Ciornei wrote:
>
> The ldpaa_eth driver already had a DPMAC statistics dump, this patch
> extends the list of stats and adds a bit more structure to the code.
>
> For a bit more context, the DPAA2 u-boot software architecture uses a
> default network interface
On Tue, May 23, 2023 at 4:48 PM Ioana Ciornei wrote:
>
> The ldpaa_eth driver already had a DPNI statistics dump, this patch
> extends the list of stats and adds a bit more structure to the code.
>
> For a bit more context, the DPAA2 u-boot software architecture uses a
> default network interface
On Tue, May 23, 2023 at 4:48 PM Ioana Ciornei wrote:
>
> In order to simplify code, dpni_statistics can be written as a union.
> Using the raw accessors we can just loop through all the statistics from
> a page without trying to access each an every one independently.
> Make this change to a union
On Tue, May 23, 2023 at 4:48 PM Ioana Ciornei wrote:
>
> Each MC commands has a specific predefined memory layout that gets
> interpreted by the firmware. The dpmac_get_counters() API memory layout
> is wrong, thus the results returned by the command are incorrect.
>
> Fix this by updating the off
On Thu, May 18, 2023 at 9:24 PM wrote:
>
> From: Ehsan Mohandesi
>
> The structure icmp6_ra_prefix_info needs to be packed because it is read
> from a network stream.
>
> Signed-off-by: Ehsan Mohandesi
> ---
> include/net6.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git
On Thu, May 18, 2023 at 9:24 PM wrote:
>
> From: Ehsan Mohandesi
>
> The argument len passed to function process_ra is the length of the IPv6
> router advertisement message and needs to be between 0 and MTU because
> it is assigned to remaining_option_len and used as a loop variable.
>
> Addresse
On Thu, May 18, 2023 at 10:35 PM wrote:
>
> From: Sean Edmond
>
> Change VCI string from "U-boot" to "U-Boot".
>
> Signed-off-by: Sean Edmond
> ---
> net/dhcpv6.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/net/dhcpv6.h b/net/dhcpv6.h
> index 80ca520432..65c8e4c71d
On Thu, May 18, 2023 at 10:35 PM wrote:
>
> From: Sean Edmond
>
> CID 453851 : sprintf() shouldn't copy from/to tmp
> CID 436278 : DHCP6 option_len should be checked before use
>
> Signed-off-by: Sean Edmond
> ---
> cmd/net.c| 12 ++--
> net/dhcpv6.c | 5 +
> 2 files changed, 1
On Wed, May 17, 2023 at 1:41 PM Eugen Hristev
wrote:
>
> The rtl8169 driver uses calls to dm_pci_bus_to_phys,
> which are compiled under CONFIG_PCI.
>
> Without CONFIG_PCI, this happens:
>
> drivers/net/rtl8169.o: in function `rtl_recv_common':
> drivers/net/rtl8169.c:555: undefined reference to `
47 matches
Mail list logo
