4 KiB.
Signed-off-by: Andreas Bießmann
---
common/image.c |1 +
include/image.h|1 +
tools/Makefile |1 +
tools/atmelimage.c | 88
tools/imagetool.c |2 ++
tools/imagetool.h |1 +
6 files changed, 94 inser
ution is a bit smarter. We would need to patch at least 2 start.S files
(arm926ejs and armv7), maybe also the arm920t one too. In fact is the
conversion of executable BLOB to ROM detected executable BLOB something that
should really be done afterwards as all other SoC vendors do.
Andreas Bießma
cfpga/spl.h
> will be merged, while I am not sure about OMAP and Exynos.
>
> Signed-off-by: Masahiro Yamada
> Cc: Tom Rini
> Cc: Michal Simek
> Cc: Andreas Bießmann
Acked-by: Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
/string.h in the end. This header howver is completely wrong
here. Just take the string.h if compiling with HOSTCC and linux/string.h when
not.
Signed-off-by: Andreas Bießmann
Cc: Heiko Schocher
---
lib/sha256.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/lib/sha256.c b/lib
From: Andreas Bießmann
Commit d016dc42cedbf6102e100fa9ecb58462edfb14f8 changed the layout of BCH8 SW
on omap3 boards. We need to adopt the ecc layout for the nand_spl_simle
driver to avoid wrong ecc errors.
Signed-off-by: Andreas Bießmann
Cc: Thomas Weber
Signed-off-by: Andreas Bießmann
From: Andreas Bießmann
Commit 890880583d84607e36b52a785a96b167728bbf73 introduced EEPROM parsing and
board detection but faild to return a valid tricorder_eeprom struct for backup
case. When pressing S200 while reading EEPROM we ignore the value. We
returned falsely a tricorder_eeprom struct
d you please chack the patches and send your ACK ASAP?
Best regards
Andreas Bießmann
Andreas Bießmann (3):
board:tricorder: always work with valid eeprom data
board:tricorder: enable omap_gpio clocks
board:tricorder: fixup SPL OOB layout
board/corscience/tricorder/tricorder.c |2 ++
in
From: Andreas Bießmann
Signed-off-by: Andreas Bießmann
Cc: Thomas Weber
Signed-off-by: Andreas Bießmann
---
include/configs/tricorder.h |3 +++
1 file changed, 3 insertions(+)
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 62f97d2..a609861 100644
--- a
On 04/10/2014 09:22 AM, Andreas Bießmann wrote:
> On 04/09/2014 05:37 PM, Tom Rini wrote:
>> On Wed, Apr 09, 2014 at 05:22:57PM +0200, Andreas Bießmann wrote:
>
>>> (gdb) s
>>> 118 __raw_writel(l, reg);
>>> (gdb) print/s l
>>> $17 = 2
Dear Tom Rini,
On 04/09/2014 05:37 PM, Tom Rini wrote:
> On Wed, Apr 09, 2014 at 05:22:57PM +0200, Andreas Bießmann wrote:
>> (gdb) s
>> 118 __raw_writel(l, reg);
>> (gdb) print/s l
>> $17 = 2048
>> (gdb) print/x l
>> $18 = 0x800
>> (gdb) pri
ldr pc, _data_abort
(gdb)
--->8---
(Encounterd with tricorder board current ToT)
I'll dive into that tomorrow. If anyone has some pointeres, please speak
out loud ;)
Best Regards
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
are of that?
I'll dive into that tomorrow. If anyone knows that problem a pointer
would be good.
Best regards
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
; first works. Cold you please provide a fix for that in 2014.04?
>
>
> Thanks your bug report!
>
> I think
> http://patchwork.ozlabs.org/patch/337822/
> should fix the problem.
works like a charm, many thanks!
Best regrads
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
> spl/u-boot-spl.lds should be updated in this case, but it wasn't.
>
> To fix this problem, linker scripts generation should be handled
> by $(call if_changed_dep,...) rather than by $(call if_changed,...).
>
> Signed-off-by: Masahiro Yamada
> Rep
pl/u-boot-spl*
abiessmann@punisher % ls -l include/configs/tricorder.h
-rw-r--r-- 1 abiessmann abiessmann 12071 Apr 9 08:28
include/configs/tricorder.h
abiessmann@punisher %
--->8---
Best regards
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
and also to the list ... sorry for the noise
On 04/07/2014 11:27 AM, Andreas Bießmann wrote:
> Hi Masahiro,
>
> a late bug report ;) changing my board config file will not regenerate
> the spl/u-boot-spl.lds for the board though it depends on it. The
> LDSCRIPT is patched
his patches publicly yet AFAIK. I have some
pre-version here, but they will not apply on current TOT and never on
2010.06.
2014.04 will be the first version with full SPL support for the first
Atmel device (sama5d3xek). 2014.01 had support for MMC boot on that
board, 2014.04 will add support fo
Dear Albert Aribaud,
please pull the following changes from u-boot-atmel/master into
u-boot-arm/master.
The following changes since commit de4fdfc1f22d70c23be5443dafacb8163023f9b1:
Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master' (2014-03-07
14:32:42 +0100)
are available in the gi
k/sama5d3xek.c | 2 ++
> include/configs/sama5d3xek.h | 12
> 4 files changed, 18 insertions(+)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
ivers/mtd/nand/atmel_nand.c | 208 ++
> include/nand.h| 6 ++
> 2 files changed, 214 insertions(+)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lis
+++
> 4 files changed, 350 insertions(+)
> create mode 100644 board/atmel/sama5d3_xplained/Makefile
> create mode 100644 board/atmel/sama5d3_xplained/sama5d3_xplained.c
> create mode 100644 include/configs/sama5d3_xplained.h
applied with reordering of boards.cfg to u-b
iver-td75922.html
>
>Signed-off-by: Andreas Henriksson
>
>---
>arch/arm/include/asm/arch-at91/gpio.h |2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
___
U-Boo
k/sama5d3xek.c | 2 ++
> include/configs/sama5d3xek.h | 11 +++
> 4 files changed, 17 insertions(+)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
ces.c | 26 +
> board/atmel/at91sam9263ek/at91sam9263ek.c | 10
> include/configs/at91sam9263ek.h | 13 ++
> 3 files changed, 49 insertions(+), 0 deletions(-)
applied with a small whitespace fix to u-boot-at
builds and lets say a vectors_SPL.S for SPL builds?
Best regards
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Gerhard Sittig,
On 08.03.2014 19:46, Gerhard Sittig wrote:
enabling CONFIG_MACB makes other locations in the stamp config file
enable network related commands (actually prevents disabling them)
enable USB ethernet support by activating generic support as well as
Asix and Moschip ethernet a
uot;
#define LD_VERSION_STRING "GNU ld (GNU Binutils) 2.20.1.20100303"
andreas@andreas-pc %
--->8---
I haven't seen anything about that on the list, is it a known bug? Is
MAKEALL still a tool to use or is it outdated?
At the moment I have not the time
may be wrong,
but then please elaborate your change in detail.
Best regards
Andreas Bießmann
[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/180060
[2] http://www.denx.de/wiki/U-Boot/Patches
[3]
http://www.denx.de/wiki/view/U-Boot/Patches#Sending_updated_patch_versions
[4] http://arti
Just thinking ... have you checked the global data pointer? Is it
possible that the global data of the first u-boot influences the global
data of the second one?
Best regards
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
1
>
> /* Ethernet */
> +#define CONFIG_MACB_SEARCH_PHY
That change would be accepted, if the SoB line is available.
> #define CONFIG_MACB 1
> #define CONFIG_RMII 1
> #define CONFIG_NET_RETRY_COUNT 20
>
Best rega
ssing CCM_CCMR) for the
> PMIC access.
> If I throw in a mxc_dump_clocks() earlier it hangs there.
Well, it may be related to some freescale interna I do not know. However
It is likely that you really overwrite the first u-boot version with the
second one.
>
> I'm pretty much running out of ideas, so any pointers are appreciated.
Hope it helps ...
Best regards
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
u-boot ELF. Maybe you want
to sort that out?
Sorry if that was discussed before, haven't followed the whole discussion.
Nevertheless, many thanks for your great work!
Best regards
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
our special
android kernel? Therefore would be the problem your special u-boot
variant (as pointed out before).
Best regards
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On 01/06/2014 07:45 AM, Masahiro Yamada wrote:
> Like other architectures, CONFIG_AVR32 can be defined
> in arch/avr32/config.mk rather than board header files.
>
> Signed-off-by: Masahiro Yamada
> Cc: Andreas Bießmann
Acked-by: Andreas Bießmann
> ---
> arch/avr32/con
Dear Albert Aribaud,
please pull the following fix ups from u-boot-atmel/master into
u-boot-arm/master.
The following changes since commit d2c7074b9593d822e2359a09c21747248fdf5fac:
ARM: OMAP5: clocks: Update MPU settings for OPP_NOM (2013-12-12 17:43:39
-0500)
are available in the git reposi
;Signed-off-by: Bo Shen
>
>---
>include/configs/at91sam9x5ek.h |8 +++-
> 1 file changed, 3 insertions(+), 5 deletions(-)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Bo Shen,
Bo Shen writes:
>remove unneeded #undef for at91sam9x5ek board.
>
>Signed-off-by: Bo Shen
>
>---
>include/configs/at91sam9x5ek.h |5 -
> 1 file changed, 5 deletions(-)
applied to u-boot-atmel/master, thanks!
Best rega
ripheral
>---
> board/atmel/at91sam9x5ek/at91sam9x5ek.c |1 -
> 1 file changed, 1 deletion(-)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
c |1 -
> include/configs/at91sam9x5ek.h | 13 +++---
> 3 files changed, 9 insertions(+), 33 deletions(-)
>
Best regards
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
74a30 100644
> --- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
> +++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
> @@ -272,7 +272,6 @@ int board_init(void)
>
> #ifdef CONFIG_ATMEL_SPI
> at91_spi0_hw_init(1 << 0);
> - at91_spi0_hw_init(1 << 4);
So the correct change would be to remove the first line and leave the
at91_spiX_hw_init() untouched.
> #endif
>
> #ifdef CONFIG_MACB
>
@jagannadh.teki: I grabbed that patch delegated to you @ patchwork.
Best regards
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
your baseboard (not the
J-Link!), switch J9 correclty (I think open it), push and hold PB4 and
push/release PB1, after that sequence startup sam-ba, choose the correct
interface and the 'at91sama5d3x-ek' board.
Best regards
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Albert Aribaud,
On 27.11.13 16:09, Andreas Bießmann wrote:
> Building some arm boards with older binutils may produce errors like this:
>
> ---8<---
> crt0.S: Assembler messages:
> crt0.S:70: Error: register expected, not '#(184)' -- `sub sp,#(184)'
> --
relative jump with 16 bit offset can not work cause the symbol
cpu_init_f is to far away.
I had similiar issue in linux kernel for avr32 these days. I found a
work around, please read https://lkml.org/lkml/2013/10/24/156 to
understand it.
Best regards
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Jiří Prchal,
On 09/16/2013 11:36 AM, Jiří Prchal wrote:
> Dne 16.9.2013 10:27, Andreas Bießmann napsal(a):
>> On 09/13/2013 04:41 PM, Jiří Prchal wrote:
>>> Dne 13.9.2013 16:10, Andreas Bießmann napsal(a):
>>>> On 09/13/2013 03:00 PM, Jiri Prchal wrote:
>>
://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to 1dcdd86205708d3ab9f0dc3a2d6b5fa12b16fde4:
arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)
(2013-12-09 13:21:54 +0100)
Andreas Bießmann (4
files changed, 332 insertions(+)
> create mode 100644 board/calao/usb_a9263/Makefile
> create mode 100644 board/calao/usb_a9263/usb_a9263.c
> create mode 100644 include/configs/usb_a9263.h
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
Dear Heiko Schocher,
Heiko Schocher writes:
>enable support for the siemens AT91SAM9G20 based board corvus.
>
>Signed-off-by: Boris Schmidt
>Reviewed-by: Heiko Schocher
>Cc: Andreas Bießmann
>Cc: Bo Shen
>
>---
>- changes for v2:
> - add comments from
Dear Heiko Schocher,
Heiko Schocher writes:
>enable support for the siemens AT91SAM9G20 based boards taurus
>and axm.
>
>Signed-off-by: Roger Meier
>Reviewed-by: Heiko Schocher
>Cc: Andreas Bießmann
>Cc: Bo Shen
>
>---
>- changes for v2:
> - add comments
Dear Andreas Devel,
Andreas Devel writes:
>Signed-off-by: Andreas Bießmann
>
>---
>arch/arm/cpu/arm926ejs/at91/led.c | 16 +++-
> board/ronetix/pm9261/led.c| 14 +++---
> board/ronetix/pm9263/led.c| 10 +-
> include/configs/pm9
Dear Andreas Devel,
Andreas Devel writes:
>Signed-off-by: Andreas Bießmann
>Acked-by: Jens Scharsig (BuS Elektronik)
>Tested-by: Jens Scharsig (BuS Elektronik)
>Acked-by: Scott Wood
>
>---
>board/BuS/vl_ma2sc/vl_ma2sc.c |5 +++--
> board/egnite/ethernut5/ethern
Dear Andreas Devel,
Andreas Devel writes:
>In order to get the very same value for legacy pin definitions and new gpio
>definitions set the legacy PIN_BASE to 0.
>
>Signed-off-by: Andreas Bießmann
>
>---
>arch/arm/include/asm/arch-at91/gpio.h |2 +-
> 1 file ch
Dear Andreas Devel,
Andreas Devel writes:
>This patch define new names for GPIO pins on at91 devices. Follow up patches
>will convert the whole infrastructure to use these new definitions.
>
>Signed-off-by: Andreas Bießmann
>Tested-by: Bo Shen
>
>---
>arch/arm/incl
f's.
Another solution could be to move this function to board code.
Any other suggestions?
Best regards
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to d07e2b598a690d6eb75019b379fc4933affe3d2c:
arm: atmel: eb_cpux9k2: config clean up (2013-12-01 22:38:53 +0100)
Andreas
ed, 4 deletions(-)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
drc.c
> create mode 100644 arch/arm/include/asm/arch-at91/atmel_mpddrc.h
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
board/atmel/sama5d3xek/sama5d3xek.c |6 ++
> 1 file changed, 6 insertions(+)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
.
>
>So move CONFIG_SYS_NO_FLASH definition to proper position.
>
>Signed-off-by: Bo Shen
>
>---
>include/configs/at91sam9m10g45ek.h |7 ---
> 1 file changed, 4 insertions(+), 3 deletions(-)
applied to u-boot-atmel/master, tha
> include/configs/sama5d3xek.h | 34 ++
> 8 files changed, 285 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm/cpu/at91-common/spl.c
> create mode 100644 arch/arm/cpu/at91-common/u-boot-spl.lds
> create mode 100644 arch/arm/include/asm/arch-at
Dear Heiko Schocher,
Heiko Schocher writes:
>add common phy reset code into a common function.
>
>Signed-off-by: Heiko Schocher
>Cc: Andreas Bießmann
>Cc: Bo Shen
>Cc: Jens Scharsig
>Cc: Sergey Lapin
>Cc: Stelian Pop
>Cc: Albin Tonnerre
>Cc: Eric Benard
>
--
> 1 file changed, 2 insertions(+), 4 deletions(-)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
rm/cpu/armv7/at91/sama5d3_devices.c |2 +-
> arch/arm/cpu/armv7/at91/timer.c |2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
___
U-Boot mailing list
U
insertions(+), 2 deletions(-)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
e/asm/arch-at91/at91_pmc.h |4
> 1 file changed, 4 insertions(+)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Mateusz Kulikowski,
On 11/28/2013 10:29 PM, Mateusz Kulikowski wrote:
> On 11.11.2013 12:03, Andreas Bießmann wrote:
>>> +
>>> +/* Enable NandFlash */
>>> +at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
>>
>> Here you could really u
Signed-off-by: Andreas Bießmann
---
arch/arm/cpu/arm926ejs/at91/led.c | 16 +++-
board/ronetix/pm9261/led.c| 14 +++---
board/ronetix/pm9263/led.c| 10 +-
include/configs/pm9261.h |6 +++---
include/configs/pm9263.h |4
Signed-off-by: Andreas Bießmann
---
board/BuS/vl_ma2sc/vl_ma2sc.c |5 +++--
board/egnite/ethernut5/ethernut5.c |3 ++-
board/esd/meesc/meesc.c|5 +++--
board/esd/otc570/otc570.c |5 +++--
board/eukrea/cpu9260/cpu9260.c |5 +++--
board/ronetix
In order to get the very same value for legacy pin definitions and new gpio
definitions set the legacy PIN_BASE to 0.
Signed-off-by: Andreas Bießmann
---
arch/arm/include/asm/arch-at91/gpio.h |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/include/asm/arch-at91
This patch define new names for GPIO pins on at91 devices. Follow up patches
will convert the whole infrastructure to use these new definitions.
Signed-off-by: Andreas Bießmann
---
arch/arm/include/asm/arch-at91/gpio.h | 24 +++-
drivers/gpio/at91_gpio.c
hardware, it will work with a port number
plus mask. This will be sent soon, but too late for 2014.01.
This series however had an RFC in the MW and will therefore end up in
the 2014.01 release.
For all waiting on this change, I hopefully merge it next week and send
another PR to Albert.
Andreas
by: Alexey Smishlayev
Signed-off-by: Andreas Bießmann
---
arch/arm/cpu/armv7/lowlevel_init.S |2 +-
arch/arm/lib/crt0.S|2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/armv7/lowlevel_init.S
b/arch/arm/cpu/armv7/lowlevel_init.S
index 69e3053.
re for two different toolchains?
Best regards
Andreas Bießmann
[1] http://www.denx.de/wiki/DULG/ELDK
[2]
http://www.mentor.com/embedded-software/sourcery-tools/sourcery-codebench/editions/lite-edition/
[3]
https://www.google.com/search?q=arm+linux+toolchain#q=build+arm+linux+toolchain
[4] http://
; Oops, sorry, bad question :)
>
> Anybody knows if other OMAP3-based boards are affected for this issue ?
not here on tricorder board, it has an AM37xx core.
Best regards
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Alexey Smishlayev,
On 11/27/2013 02:53 PM, Alexey Smishlayev wrote:
> On 2013.11.27. 15:39, Andreas Bießmann wrote:
>> crt0.S:70 subtracts the GD_SIZE from current stack pointer. The code
>> written seems to miss the Rn according to [1]. Could you please test to
>> chang
r. The code
written seems to miss the Rn according to [1]. Could you please test to
change it from to: 'sub sp, sp, #GD_SIZE'?
I wonder why my toolchain ignore this. It obviously take Rd == Rn when
Rn is missing.
Best regards
Andreas Bießmann
in patchwork then.
> What should I do?
File bug report at patchwork ML?
> Is it better to squash it to another patch?
Well to show it up in patchwork that could work. Since this change is
quite trivial I think it will also work if you just peak the relevant
custodian to pick this from
Hi Bo,
On 11/14/2013 07:53 AM, Bo Shen wrote:
> On 11/14/2013 02:28 PM, Andreas Bießmann wrote:
>> On 14.11.13 06:52, Heiko Schocher wrote:
>>> Am 13.11.2013 14:34, schrieb Andreas Bießmann:
>>>> Hi Bo,
>>>>
>>>> On 11/06/2013 06:29 AM, Bo Sh
Hi Bo,
On 11/14/2013 07:40 AM, Bo Shen wrote:
> On 11/13/2013 09:03 PM, Andreas Bießmann wrote:
>> On 11/06/2013 06:29 AM, Bo Shen wrote:
>>> +static void atmel_mpddr_op(int mode, u32 ram_address)
>>
>> static inline, could give the compiler a hint to optimize he
Hello Heiko,
On 14.11.13 06:52, Heiko Schocher wrote:
> Am 13.11.2013 14:34, schrieb Andreas Bießmann:
>> Hi Bo,
>>
>> On 11/06/2013 06:29 AM, Bo Shen wrote:
>>> Enable Atmel sama5d3xek boart spl boot support, which can load u-boot
>>> from SD card with FAT
-boot-atmel.git master
for you to fetch changes up to 6182e9546aa602c97d55963e133c7e1a85ec:
ARM: at91: sama5d3: add support for sama5d36 chip (2013-11-13 22:18:18 +0100)
Andreas Bießmann (6):
video: remove AT91 legacy API
/at91/sama5d3_devices.c |4 +++-
> arch/arm/include/asm/arch-at91/sama5d3.h |3 +++
> 2 files changed, 6 insertions(+), 1 deletion(-)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.
Dear Andreas Devel,
Andreas Devel writes:
>Signed-off-by: Andreas Bießmann
>
>---
>drivers/net/at91_emac.c |9 -
> 1 file changed, 9 deletions(-)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
___
Dear Andreas Devel,
Andreas Devel writes:
>Signed-off-by: Andreas Bießmann
>
>---
>arch/arm/include/asm/arch-at91/at91_pio.h | 33
> arch/arm/include/asm/arch-at91/at91_pit.h | 16 --
> arch/arm/include/asm/arch-at91/at91_pmc.h | 51 ++-
Dear Andreas Devel,
Andreas Devel writes:
>Signed-off-by: Andreas Bießmann
>
>---
>include/configs/snapper9260.h |1 -
> 1 file changed, 1 deletion(-)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
___
U-Bo
Dear Andreas Devel,
Andreas Devel writes:
>Signed-off-by: Andreas Bießmann
>Acked-by: Bo Shen
>
>---
>include/configs/at91sam9m10g45ek.h |1 -
> 1 file changed, 1 deletion(-)
applied to u-boot-atmel/master, thanks!
Best regards
Dear Andreas Devel,
Andreas Devel writes:
>Since the required API is gpio which is enclosed with CONFIG_ATMEL_LEGACY use
>that switch here.
>
>Signed-off-by: Andreas Bießmann
>Acked-by: Heiko Schocher
>
>---
>drivers/i2c/soft_i2c.c |2 +-
> include/i2c.h
Dear Andreas Devel,
Andreas Devel writes:
>Signed-off-by: Andreas Bießmann
>Acked-by: Jens Scharsig (BuS Elektronik)
>Acked-by: Anatolij Gustschin
>
>---
>drivers/video/bus_vcxk.c | 15 ---
> 1 file changed, 15 deletions(-)
applied to u-boot-atmel/master,
SE ATMEL_BASE_DDRCS
> #define CONFIG_SYS_SDRAM_SIZE0x2000
>
> +#ifdef CONFIG_SPL_BUILD
> +#define CONFIG_SYS_INIT_SP_ADDR 0x31
> +#else
> #define CONFIG_SYS_INIT_SP_ADDR \
> (CONFIG_SYS_SDRAM
RC_TP2R_TXARDS_MASK0xf
> +#define ATMEL_MPDDRC_TP2R_TRPA_OFFSET8
> +#define ATMEL_MPDDRC_TP2R_TRPA_MASK 0xf
> +#define ATMEL_MPDDRC_TP2R_TRTP_OFFSET12
> +#define ATMEL_MPDDRC_TP2R_TRTP_MASK 0x7
> +#define ATMEL_MPDDRC_TP2R_TFAW_OFFSET16
> +#define ATMEL_MPDDRC_TP2R_TFAW_MASK 0xf
> +
> +/* bit field in Memory Device Register */
> +#define ATMEL_MPDDRC_MDR_LPDDR_SDRAM 0x3
> +#define ATMEL_MPDDRC_MDR_DDR2_SDRAM 0x6
> +#define ATMEL_MPDDRC_MDR_DBW_MASK(0x1 << 4)
> +#define ATMEL_MPDDRC_MDR_DBW_32BITS (0x0 << 4)
> +#define ATMEL_MPDDRC_MDR_DBW_16BITS (0x1 << 4)
> +
> +#endif
> diff --git a/spl/Makefile b/spl/Makefile
> index b366ac2..6dd1e5d 100644
> --- a/spl/Makefile
> +++ b/spl/Makefile
> @@ -123,6 +123,10 @@ ifeq ($(SOC),exynos)
> LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
> endif
>
> +ifeq ($(SOC),at91)
> +LIBS-y += arch/$(ARCH)/cpu/at91-common/libat91-common.o
> +endif
The libat91-common.o should be built in any case. The mpddrc.o should
only be included for SPL build (that mentioned Heiko in another mail).
> +
> # Add GCC lib
> ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
> PLATFORM_LIBGCC = $(SPLTREE)/arch/$(ARCH)/lib/libgcc.o
>
Best regards
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
for sam9261 (which is the SoC on pm9261) doesn't name bit
position 12 either.
So I'm fine with your change, but please fix the pm9261 board also (use
the PLLADIV_2 define).
>
> #define AT91_PMC_IXR_MOSCS 0x0001
> #define AT91_PMC_IXR_LOCKA 0x0002
IOC);
> + at91_periph_clk_enable(ATMEL_ID_PIOD);
> + at91_periph_clk_enable(ATMEL_ID_PIOE);
> +
> at91_seriald_hw_init();
>
> return 0;
>
To say it clear, for this patch no change requested.
Best regards
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Bo,
On 11/06/2013 06:29 AM, Bo Shen wrote:
> The offset of MULA field in PLLA register in sama5d3 is 18,
> and the length only 7 bits.
>
> Signed-off-by: Bo Shen
>
> ---
no complaints
Best regards
Andreas Bießmann
___
U-B
Hi Bo,
On 11/06/2013 06:29 AM, Bo Shen wrote:
> As the DBGU and PIT has its own ID on sama5d3 SoC, while not share
> with SYS ID. So, correct them.
>
> Signed-off-by: Bo Shen
>
> ---
no complaints
Best regards
Andreas Bießmann
Hello Heiko,
On 11/12/2013 11:21 AM, Heiko Schocher wrote:
> add common phy reset code into a common function.
>
> Signed-off-by: Heiko Schocher
> Cc: Andreas Bießmann
> Cc: Bo Shen
> Cc: Jens Scharsig
> Cc: Sergey Lapin
> Cc: Stelian Pop
> Cc: Albin Tonner
; +/* bootstrap + u-boot + env in dataflash on CS0 */
> +#define CONFIG_ENV_IS_IN_DATAFLASH
> +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 +
> 0x4000)
> +#define CONFIG_ENV_OFFSET0x2000
> +#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
> + CONFIG_ENV_OFFSET)
> +#define CONFIG_ENV_SIZE 0x2000
> +#define CONFIG_BOOTCOMMAND "nboot 2100 0"
> +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
> + "root=/dev/mtdblock1 " \
> + "mtdparts=" MTDPARTS_DEFAULT " " \
> + "rw rootfstype=jffs2"
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "mtdparts=" MTDPARTS_DEFAULT "\0" \
> +
> +#define CONFIG_SYS_PROMPT"U-Boot> "
> +#define CONFIG_SYS_CBSIZE256
> +#define CONFIG_SYS_MAXARGS 16
> +#define CONFIG_SYS_PBSIZE(CONFIG_SYS_CBSIZE + \
> + sizeof(CONFIG_SYS_PROMPT) + 16)
> +#define CONFIG_CMDLINE_EDITING
> +#define CONFIG_AUTO_COMPLETE
> +#define CONFIG_SYS_HUSH_PARSER
> +
> +/*
> + * Size of malloc() pool
> + */
> +#define CONFIG_SYS_MALLOC_LENROUND(3 * CONFIG_ENV_SIZE + 128*1024,
> 0x1000)
> +
> +#endif
>
Beside these minor complaints there is nothing to stop inclusion for
2014.01. Please stay tuned and do not send v3 immediately cause of the
ongoing change for GPIO API and consolidation of macb reset.
I think another ping from your side in about two weeks would be Ok, if
you haven't seen changes in the two mentioned points on the list.
Best regards
Andreas Bießmann
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Masahiro Yamada,
On 11/08/2013 03:01 AM, Masahiro Yamada wrote:
> Hello, Andreas.
>
> I already posted a patch to fix this issue.
> http://patchwork.ozlabs.org/patch/285071/
sorry, haven't seen that patch. Please ignore my patch then.
Best regards
x27;d glad to see reports of (un)successful boot with
configured bootm command.
But I see your point, there is another input vector for the tests. I
think this could only be defined on a per board basis.
To pick up your example, I think it is worth to know that one tested the
am335x_evm to boot
not cause any additional efforts
> we should keep it, no matter if there is an active maintainer or test
> reports or not. Only when a board becomes a pain to somebody - say,
> because it develops build errors, or wit would require efforts to
> adapt it to some new feature, _then_ we w
Hello Heiko,
On 11/07/2013 11:39 AM, Heiko Schocher wrote:
> Am 07.11.2013 10:37, schrieb Andreas Bießmann:
>> On 11/07/2013 09:17 AM, Heiko Schocher wrote:
>>> Am 06.11.2013 08:50, schrieb Wolfgang Denk:
>>>> In message<20131105203736.GM5925@bill-the-cat>
ould easily build helper scripts to query that database when this
board was last tested.
> If we decide to delete older boards after n release cycles without
> testreports, we must not decide nor look in a database. We are
> sure, we have only "good and working" boards ... a
701 - 800 of 1783 matches
Mail list logo