Hi there,
I enabled (Automatic software update from a TFTP server
[CONFIG_UPDATE_TFTP]), and noticed that it takes around 7 seconds to detect
link up on the PHY.
Is there a way to make this detection faster? I tried to advertise only 10MBit
full duplex mode with auto negotiation disabled,
Hi there,
I have a script in FIT image, I want to verify its signature before
running it.
When I run "source" command, it doesn't check the signature, only hash@1.
images {
...
script {
description = "Script";
data = /incbin/("script.txt");
spl.bin
>
>
> Reuben Dowle
> Software Architect
> Phone:
>
> Fax:
> E-Mail:
> Website:
> +64 4 499 6000
>
> +64 4 473 4447
> reuben.do...@4rf.com
> Https://www.4rf.com
>
>
>
>
>
>
>
Hi there,
What are the ways of copying whole FIT image form NOR flash to RAM by
specifying flash offset without any extra bytes.
I've seen quite a lot of times when kernel image size has a fixed value (as an
uboot environment variable), which is greater than the actual kernel size.
Problem
Hi there,
Does U-boot take into account certificate expiration date when verifying
signed images in FIT? In other words, is date stored along with the public key
in DTB file?
Cheers,
Andy
Hi there,
Is it possible to make SPL U-Boot to verify signature located in
configuration section of FIT image, and do not continue in case the signature
is missing or doesn't match?
Asking because I couldn't find any configuration option for that, and I have
FIT image with signature but
.
>
> The solution is simple, just set the flash to 3-byte mode before
> resetting the board by calling set_4byte() with enable=0. But you can
> never 100% fix this because the watchdog reset won't give you a chance
> to call set_4byte() before resetting the board.
>
Hi Stefan,
On Wed, 12 Aug 2020 15:57:31 +0300 Stefan Roese wrote
> Hi Andrew,
>
> On 12.08.20 14:48, Andrii Voloshyn wrote:
> > Hi Stefan,
> >
> > On Wed, 12 Aug 2020 15:08:41 +0300 Stefan Roese wrote
> >
> >
&g
Hi Stefan,
On Wed, 12 Aug 2020 15:08:41 +0300 Stefan Roese wrote
> Hi Andrew,
>
> On 12.08.20 14:04, Andrii Voloshyn wrote:
> > Hi Stefan,
> >
> > > Hi Andrew,
> > >
> > > (added Weijie to Cc)
> >
Hi Stefan,
> Hi Andrew,
>
> (added Weijie to Cc)
>
> On 12.08.20 09:18, Andrii Voloshyn wrote:
> >Hi there,
> >
> >There is one issue, I experience with (U-Boot 2020.07) on MT7628DAN,
> > "reset" command issued in hush p
Hi there,
There is one issue, I experience with (U-Boot 2020.07) on MT7628DAN, "reset"
command issued in hush prompt
causes board to hang, until I do a power cycle. On the other hand there is no
such issue on mt7688 board.
What's interesting, is that "reboot" issued in Linux shell
11 matches
Mail list logo
