Hi,
I am new. I am trying to figure out the right pogo pins to get in order to try
to build a serial port for N900. But I am trying to decipher the docs in the
wiki at the moment.
Best,
--
Ashish Shah
On Wed, Nov 9, 2022, at 2:33 PM, Pali Rohár wrote:
> On Wednesday 02 November 2022
rr);
> > + udelay(1);
>
> Can you add relevant comments here, why is it for udelay(1) ?
Hi Jagan,
Watchdog gets triggered for large read/write/erase since this delay is not
present in this API(readl_poll_timeout), add this delay here.
Regards
Ashish
Hi Frieder,
> -Original Message-
> From: Schrempf Frieder
> Sent: Tuesday, December 3, 2019 2:27 PM
> To: Kuldeep Singh ; u-boot@lists.denx.de
> Cc: Priyanka Jain ; ja...@amarulasolutions.com;
> s...@denx.de; Ashish Kumar ; Ye Li
>
> Subject: Re: [EXT] Re: [PATC
> -Original Message-
> From: Stefan Roese
> Sent: Tuesday, October 22, 2019 9:12 PM
> To: Schrempf Frieder ; Ashish Kumar
> ; Ye Li ;
> ja...@amarulasolutions.com
> Cc: Fabio Estevam ; u-boot@lists.denx.de; dl-
> uboot-imx
> Subject: Re: [U-Boot] [EXT] Re
> -Original Message-
> From: Vignesh Raghavendra
> Sent: Wednesday, September 11, 2019 3:37 PM
> To: Simon Goldschmidt ; Ashish Kumar
>
> Cc: Jagan Teki ; u-boot@lists.denx.de;
> alexey.brod...@synopsys.com; Eugeniy Paltsev
> ; Tom Rini
> Subject: Re: [U-
> -Original Message-
> From: Stefan Roese
> Sent: Thursday, September 12, 2019 6:06 PM
> To: Ashish Kumar ; Schrempf Frieder
> ; Ye Li ;
> ja...@amarulasolutions.com
> Cc: Fabio Estevam ; u-boot@lists.denx.de; dl-
> uboot-imx
> Subject: Re: [U-Boot] [EXT] Re
both methods. There are some debug prints in spi-mem
version.
https://github.com/erashish007/u-boot-spi-mem/
br: spi-mem-port
https://github.com/erashish007/u-boot-spi-mem/
br: xfer_wrking
Regards
Ashish
> ___
> U-Boot mailing list
> U-Boot@lis
> -Original Message-
> From: Stefan Roese
> Sent: Wednesday, September 11, 2019 11:17 AM
> To: Schrempf Frieder ; Ashish Kumar
> ; Ye Li ;
> ja...@amarulasolutions.com
> Cc: Fabio Estevam ; u-boot@lists.denx.de; dl-
> uboot-imx
> Subject: Re: [U-Boot
> -Original Message-
> From: Vignesh Raghavendra
> Sent: Tuesday, September 10, 2019 10:36 PM
> To: Jagan Teki
> Cc: Vignesh Raghavendra ; u-boot@lists.denx.de; Tom
> Rini ; Eugeniy Paltsev
> ; alexey.brod...@synopsys.com; Ashish
> Kumar
> Subject: [EXT] [
> -Original Message-
> From: Schrempf Frieder
> Sent: Wednesday, August 14, 2019 5:41 PM
> To: Ashish Kumar ; Ye Li ;
> ja...@amarulasolutions.com
> Cc: Fabio Estevam ; u-boot@lists.denx.de; dl-
> uboot-imx
> Subject: Re: [EXT] Re: [U-Boot] [PATCH 1/6] spi
> -Original Message-
> From: Schrempf Frieder
> Sent: Wednesday, August 14, 2019 5:41 PM
> To: Ashish Kumar ; Ye Li ;
> ja...@amarulasolutions.com
> Cc: Fabio Estevam ; u-boot@lists.denx.de; dl-
> uboot-imx
> Subject: Re: [EXT] Re: [U-Boot] [PATCH 1/6] spi
QSPI-IP(ls1012, ls1043, ls1021 big endian),
(ls1088,ls2088 little endian) is not consistent on various silicon's. I am not
sure if Yogesh who worked with you on Linux porting gave you this information
about endianness inconsistency.
Please suggest way forward. How to correct this issue?
Regards
riv->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK;
> - qspi_op_erase(priv);
I update this on internal repo and it works:
driver/spi/fsl_qspi : update op_erase wrt 24/32 bits address
Signed-off-by: Ashish Kumar
diff --git a/drivers/spi/fsl_qspi.c b/drivers/s
> -Original Message-
> From: Vignesh Raghavendra
> Sent: Friday, July 19, 2019 11:41 PM
> To: Ashish Kumar ; Jagan Teki
> ; h...@denx.de
> Cc: U-Boot-Denx
> Subject: Re: [EXT] Re: [Patch V3] drivers: mtd :spi: Enable 4B opcodes for
> SPANSION s25fl512s
> -Original Message-
> From: Vignesh Raghavendra
> Sent: Thursday, July 18, 2019 5:37 PM
> To: Jagan Teki ; Ashish Kumar
>
> Cc: U-Boot-Denx
> Subject: Re: [EXT] Re: [Patch V3] drivers: mtd :spi: Enable 4B opcodes for
> SPANSION s25fl512s
>
> Caution: E
> -Original Message-
> From: Jagan Teki
> Sent: Thursday, July 18, 2019 5:00 PM
> To: Ashish Kumar
> Cc: U-Boot-Denx ; Kuldeep Singh
>
> Subject: Re: [EXT] Re: [Patch v4] drivers: mtd: spi: Add micron mt35xu512a
> and mt35xu02g flash ID
>
> Caution:
> -Original Message-
> From: Jagan Teki
> Sent: Thursday, July 18, 2019 4:48 PM
> To: Ashish Kumar
> Cc: U-Boot-Denx ; Kuldeep Singh
>
> Subject: Re: [EXT] Re: [Patch v4] drivers: mtd: spi: Add micron mt35xu512a
> and mt35xu02g flash ID
>
> Caution:
> -Original Message-
> From: Jagan Teki
> Sent: Thursday, July 18, 2019 4:32 PM
> To: Ashish Kumar
> Cc: U-Boot-Denx ; Kuldeep Singh
>
> Subject: [EXT] Re: [Patch v4] drivers: mtd: spi: Add micron mt35xu512a and
> mt35xu02g flash ID
>
> Caution: EXT E
mt35xu512a and mt35xu02g suports Single I/O and OCTAL I/O
also enable use of SPI_NOR_4B_OPCODES.
These flashes are tested on LX2160ARDB and LS1028ARDB respectively
Signed-off-by: Kuldeep Singh
Signed-off-by: Ashish Kumar
---
v5:
Is INFO inplace of INFO6
v4:
Correct flash name to mt35xu512a
mt35xu512a and mt35xu02g suports Single I/O and OCTAL I/O
also enable use of SPI_NOR_4B_OPCODES.
These flashes are tested on LX2160ARDB and LS1028ARDB respectively
Signed-off-by: Kuldeep Singh
Signed-off-by: Ashish Kumar
---
v4:
Correct flash name to mt35xu512a in place of mt35xu512g
v3:
1
> -Original Message-
> From: Jagan Teki
> Sent: Thursday, July 18, 2019 3:59 PM
> To: Ashish Kumar ; Vignesh R
> Cc: U-Boot-Denx
> Subject: [EXT] Re: [Patch V3] drivers: mtd :spi: Enable 4B opcodes for
> SPANSION s25fl512s
>
> Caution: EXT Email
>
&
> -Original Message-
> From: Jagan Teki
> Sent: Thursday, July 18, 2019 3:55 PM
> To: Ashish Kumar
> Cc: U-Boot-Denx ; Kuldeep Singh
>
> Subject: [EXT] Re: [Patch V3] drivers: mtd: spi: Add micron mt35xu512g and
> mt35xu02g flash ID
>
> Caution: EXT E
> -Original Message-
> From: Jagan Teki
> Sent: Tuesday, July 16, 2019 5:25 PM
> To: Ashish Kumar
> Cc: U-Boot-Denx
> Subject: [EXT] Re: [PATCH] drivers: mtd :spi: Enable 4B opcodes for SPANSION
> s25fl512s
>
> Caution: EXT Email
>
> On Thu, Jun
compatible with
S25FL-P, and S25FL-S SPI families
Signed-off-by: Ashish Kumar
---
v3:
1. Add version info, rebase to top.
2. Re-word commit message.
v2:
1. Adding more description in commit msg.
2. consolidating "" and "" in single patch.
drivers/mtd/spi/spi-nor-ids.c | 2 +
mt35xu512g and mt35xu02g suports Single I/O and OCTAL I/O
also enable use of SPI_NOR_4B_OPCODES.
These flashes are tested on LX2160ARDB and LS1028ARDB respectively
Signed-off-by: Kuldeep Singh
Signed-off-by: Ashish Kumar
---
v3:
1. Add version info, rebase to top
v2:
1. Adding more
support QUAD I/O.
Signed-off-by: Ashish Kumar
---
v3:
1. Add version info, rebase to top
v2:
2. Adding more description in commit msg
drivers/mtd/spi/spi-nor-ids.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index ec92976
Move CONFIG_FSL_QSPI from header file to defconfigs,
consequently unset imply config(CONFIG_SPI_FLASH_BAR) which
is not valid LS series
Signed-off-by: Ashish Kumar
---
configs/ls1043aqds_qspi_defconfig| 2 ++
configs/ls1043aqds_sdcard_qspi_defconfig | 2 ++
configs
support QUAD I/O.
Signed-off-by: Ashish Kumar
---
drivers/mtd/spi/spi-nor-ids.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index 6164b6e..a992966 100644
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
mt35xu512g and mt35xu02g suports Single I/O and OCTAL I/O
also enable use of SPI_NOR_4B_OPCODES.
These flashes are tested on LX2160ARDB and LS1028ARDB respectively
Signed-off-by: Kuldeep Singh
Signed-off-by: Ashish Kumar
---
drivers/mtd/spi/spi-nor-ids.c | 2 ++
1 file changed, 2 insertions
with
S25FL-P, and S25FL-S SPI families
Signed-off-by: Ashish Kumar
---
drivers/mtd/spi/spi-nor-ids.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index ec92976..a89c191 100644
--- a/drivers/mtd/spi/spi-nor-ids.c
his you need to add another patch which I will mail you
one-on-one. I did not post it upstream stream since it was dependent on my
first patch and
Maintainers have suggested that since this fsl-qspi.c will be removed so, they
will not accept any further patch for current uboot driver.
For MX
From: Ashish Kumar
Signed-off-by: Ashish Kumar
---
configs/ls1012a2g5rdb_qspi_defconfig | 2 ++
configs/ls1012a2g5rdb_tfa_defconfig| 2 ++
configs/ls1012afrdm_qspi_defconfig | 2 ++
configs/ls1012afrdm_tfa_defconfig | 2 ++
configs
> -Original Message-
> From: Schrempf Frieder
> Sent: Thursday, May 2, 2019 12:38 PM
> To: Ashish Kumar ; Vignesh Raghavendra
> ; Rajat Srivastava ; u-
> b...@lists.denx.de; ja...@openedev.com
> Subject: Re: [EXT] Re: [U-Boot] [PATCH 2/2] fsl_qspi: Improve QSPI driv
> -Original Message-
> From: Vignesh Raghavendra
> Sent: Wednesday, April 17, 2019 6:18 PM
> To: Rajat Srivastava ; u-boot@lists.denx.de;
> tr...@konsulko.com; marek.va...@gmail.com;
> marek.vasut+rene...@gmail.com; ja...@openedev.com
> Cc: Ashish Kumar
> Subj
;>> From: Vignesh Raghavendra
> >>> Sent: Wednesday, April 24, 2019 10:17 PM
> >>> To: Rajat Srivastava ;
> >>> u-boot@lists.denx.de; ja...@openedev.com
> >>> Cc: Ashish Kumar
> >>> Subject: [EXT] Re: [PATCH 2/2] fsl_qspi: Improve QSPI dr
> -Original Message-
> From: Rajat Srivastava
> Sent: Friday, April 5, 2019 2:24 PM
> To: u-boot@lists.denx.de; vigne...@ti.com; tr...@konsulko.com;
> marek.va...@gmail.com; marek.vasut+rene...@gmail.com;
> ja...@openedev.com
> Cc: Ashish Kumar ; Rajat Srivastava
> -Original Message-
> From: Vignesh Raghavendra
> Sent: Tuesday, April 2, 2019 10:04 AM
> To: Marek Vasut ; u-boot@lists.denx.de
> Cc: Marek Vasut ; Horatiu Vultur
> ; Jagan Teki ; Simon
> Goldschmidt ; Stefan Roese ;
> Ashish Kumar
> Subject: Re: [PATC
> -Original Message-
> From: Vignesh Raghavendra
> Sent: Friday, March 29, 2019 12:17 PM
> To: Ashish Kumar ; Jagan Teki
> ; u-boot@lists.denx.de
> Cc: Kuldeep Singh
> Subject: Re: saveenv corrupts QSPI flash with latest commit U-Boot
> 2019.04-
> -Original Message-
> From: Vignesh Raghavendra
> Sent: Wednesday, March 27, 2019 9:44 AM
> To: Ashish Kumar ; Jagan Teki
> ; u-boot@lists.denx.de; Tom Rini
>
> Cc: Kuldeep Singh
> Subject: Re: saveenv corrupts QSPI flash with latest commit U-Boot
> 2019.
....
Regards
Ashish
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
t variable is more complete. Also scans for efi binaries for
> example.
>
> Signed-off-by: Mian Yousaf Kaukab
Reviewed-by: Ashish Kumar
Patch-set is good to go.
Regards
Ashish
> ---
> include/configs/ls1043a_common.h | 6 --
> 1 file changed, 6 deletions(-)
>
>
me issue for ls2080a was fixed by following patch:
> b7b8410a8f ls2080: Exit dpaa only right before exiting U-Boot
>
> Signed-off-by: Mian Yousaf Kaukab
Reviewed-by: Ashish Kumar
Patch is good to go.
Regards
Ashish
> ---
> board/freescale/ls1088a/ls1088a.c | 10 ++
&g
> -Original Message-
> From: U-Boot On Behalf Of Meenakshi
> Aggarwal
> Sent: Wednesday, February 20, 2019 3:36 PM
> To: u-boot@lists.denx.de
> Subject: [U-Boot] [PATCH v1] mc : Add support to run MC in 128 MB DDR size
Ashish: Rephrase to "Reduce MC memory size
> -Original Message-
> From: Meenakshi Aggarwal
> Sent: Tuesday, February 12, 2019 2:44 PM
> To: u-boot@lists.denx.de; Prabhakar Kushwaha
>
> Cc: Meenakshi Aggarwal
> Subject: [PATCH] mc : Add support to run MC in 128 MB DDR size
Ashish: Rephrase to "Red
"env exists mcinitcmd && env exists secureboot "\
> + "&& esbc_validate 0x2078; "
> \
> + "env exists mcinitcmd && " \
> + "fsl_mc lazy
option.
> >
> >> I will remove SPI_FLASH_BAR from defconfigs from all boards expect
> >> those controllers that really cannot handle 4 byte addressing. From a
> >> quick glance it looks following controllers support only 3 byte addresses:
> >> stm32_qspi.c
&g
> -Original Message-
> From: Schrempf Frieder
> Sent: Monday, December 3, 2018 4:49 PM
> To: Ashish Kumar ; u-boot@lists.denx.de;
> ja...@openedev.com
> Cc: Rajat Srivastava
> Subject: Re: [U-Boot] [PATCH] driver/spi: fsl_qspi: Remove non-DM stuff
>
> Hi,
>
> -Original Message-
> From: York Sun
> Sent: Tuesday, November 20, 2018 2:13 AM
> To: Ashish Kumar ; u-boot@lists.denx.de
> Cc: Yogesh Narayan Gaur ; Rajat Srivastava
>
> Subject: Re: [PATCH v3] fsl-lsch3: soc: Enable AHB read support for Flexspi
> controller
&
> -Original Message-
> From: York Sun
> Sent: Tuesday, November 13, 2018 3:34 AM
> To: Ashish Kumar
> Cc: u-boot@lists.denx.de; Rajat Srivastava ; Yogesh
> Narayan Gaur
> Subject: Re: [PATCH v2] fsl-lsch3: soc: Enable AHB read support for Flexspi
> controller
Enable AHB support for Flexspi controller interface meaning
memory can be accessed via md command using absolute addresses
Signed-off-by: Yogesh Gaur
Signed-off-by: Rajat Srivastava
Signed-off-by: Ashish Kumar
---
v3:
Depends upon http://patchwork.ozlabs.org/patch/975009/
v2:
1. Rename FSPI
Signed-off-by: Rajat Srivastava
Signed-off-by: Ashish Kumar
---
configs/ls1088aqds_qspi_SECURE_BOOT_defconfig| 1 +
configs/ls1088aqds_qspi_defconfig| 1 +
configs/ls1088aqds_sdcard_qspi_defconfig | 1 +
configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
> -Original Message-
> From: Jagan Teki
> Sent: Wednesday, October 10, 2018 11:51 AM
> To: Ashish Kumar
> Cc: U-Boot-Denx ; Jagan Teki ;
> Rajat Srivastava ; Suresh Gupta
>
> Subject: Re: [U-Boot] [PATCH] driver/mtd: Add MICRON manufacturer id in spi
> fr
Enable AHB support for Flexspi controller interface meaning
memory can be accessed via md command using absolute addresses
Signed-off-by: Yogesh Gaur
Signed-off-by: Rajat Srivastava
Signed-off-by: Ashish Kumar
---
v2:
1. Rename FSPI to FlexSPI in description and comments
2. s/cmd/command
3
Signed-off-by: Priyanka Jain
Signed-off-by: Sriram Dash
Signed-off-by: Ashish Kumar
---
v2:
1. Rename SYS_FSL_FSPI_ADDR SYS_NXP_FSPI_ADDR
2. Add mcaro for lutkey base addr and LUTa base addr
arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h | 6 ++
1 file changed, 6 insertions
Hello York,
> -Original Message-
> From: York Sun
> Sent: Tuesday, September 25, 2018 10:20 PM
> To: Ashish Kumar ; u-boot@lists.denx.de
> Cc: Rajat Srivastava ; Yogesh Narayan Gaur
>
> Subject: Re: [PATCH] fsl-lsch3: soc: Enable AHB support flexspi controller
>
Enable AHB support for flexspi controller interface meaning
memory can be accessed via md command using absolute addresses
Signed-off-by: Yogesh Gaur
Signed-off-by: Rajat Srivastava
Signed-off-by: Ashish Kumar
---
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 10 ++
arch/arm/cpu/armv8/fsl
Signed-off-by: Priyanka Jain
Signed-off-by: Sriram Dash
Signed-off-by: Ashish Kumar
---
depends upon:
http://patchwork.ozlabs.org/patch/962357/
arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm/include/asm/arch-fsl
-by: Yogesh Gaur
Signed-off-by: Rajat Srivastava
Signed-off-by: Ashish Kumar
---
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 10 +
drivers/spi/Kconfig |7 +
drivers/spi/Makefile |1 +
drivers/spi/nxp_fspi.c| 1088
Signed-off-by: Suresh Gupta
Signed-off-by: Yogesh Gaur
Signed-off-by: Ashish Kumar
---
drivers/mtd/spi/sf_internal.h | 1 +
drivers/mtd/spi/spi_flash.c | 2 ++
2 files changed, 3 insertions(+)
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index 4f63cacc64
Convert fsl_qspi.c to complete DM mode.
Signed-off-by: Ashish Kumar
Tested-by: Rajat Srivastava
Tested-by: Ye Li
---
Tested on LS1088ARDB(arm64).
Tested on LS1021ATWR(arm32) by Rajat
Tested on i.mx6 and i.mx7 by Ye Li
Depends on patch series:
http://patchwork.ozlabs.org/patch/935858/
http
Hello Jagan,
> -Original Message-
> From: Jagan Teki [mailto:jagannadh.t...@gmail.com]
> Sent: Monday, May 14, 2018 3:18 PM
> To: Ashish Kumar
> Cc: Jagan Teki ; York Sun
> ; Prabhakar Kushwaha
> ; Yogesh Narayan Gaur
> ; Poonam Aggrwal
> ; u-boot@lists.denx
Hello Ye,
Since you have converted the i.mx6,i.mx7 series to DM model.
It will worth to test your code after removing non-DM code from fsl_qspi.c code
as well. Attaching patch for same.
Regards
Ashish
> -Original Message-
> From: Ye Li
> Sent: Wednesday, June 27, 2018
Move CONFIG_SPI_FLASH_SPANSION, CONFIG_SPI_FLASH, to defconfig.
Also disable disable 4K erase size option.
Signed-off-by: Ashish Kumar
---
configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 3 +++
configs/ls2088ardb_qspi_defconfig | 3 +++
include/configs/ls2080ardb.h
4K erase size is used only in case of hydrid mode which is not
supported on any NXP platform with flash "s25fs512s".
Supported mode is uniform sector, with erase size 256kiB.
Signed-off-by: Ashish Kumar
---
v2:
1. use make savedefconfig
2. Include LS1012 qspi defconfigs as well
> -Original Message-
> From: York Sun
> Sent: Monday, June 25, 2018 9:05 PM
> To: Ashish Kumar ; u-boot@lists.denx.de
> Cc: Udit Agarwal ; Priyanka Jain
> ; Vinitha V Pillai ; Prabhakar
> Kushwaha ; Mingkai Hu
> ; york@nxp.com.com; Ruchika Gupta
>
>
4K erase size is used only in case of hydrid mode which is not
supported on any NXP platform with flash "s25fs512s".
Supported mode is uniform sector, with erase size 256kiB.
Signed-off-by: Ashish Kumar
---
configs/ls1046aqds_qspi_defconfig| 1
Change sector size to 256KiB in table spi_flash_ids.
Signed-off-by: Ashish Kumar
---
drivers/mtd/spi/spi_flash_ids.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/spi/spi_flash_ids.c b/drivers/mtd/spi/spi_flash_ids.c
index c45d2e8..54d491c 100644
--- a/drivers
Yogesh Narayan Gaur <yogeshnarayan.g...@nxp.com>; Poonam Aggrwal
> <poonam.aggr...@nxp.com>; Ashish Kumar <ashish.ku...@nxp.com>; u-
> b...@lists.denx.de
> Subject: Re: mtd: spi-nor: new NXP FlexSPI driver location & framework to use
> ?
>
> On Fri, May 11, 2018 at
> -Original Message-
> From: Jagan Teki [mailto:jagannadh.t...@gmail.com]
> Sent: Wednesday, May 9, 2018 4:44 PM
> To: Ashish Kumar <ashish.ku...@nxp.com>
> Cc: U-Boot Mailing List <u-boot@lists.denx.de>
> Subject: Re: [U-Boot] [PATCH] driver/mtd/spi: De
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
drivers/mtd/spi/spi_flash.c | 11 ++-
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 3d24a08..ce420cb 100644
--- a/drivers/mtd/spi/spi_flash.c
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
board/freescale/ls1088a/ddr.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/freescale/ls1088a/ddr.h b/board/freescale/ls1088a/ddr.h
index a1ad709..18d420e 100644
--- a/board/freescale/ls1088a/ddr.h
+++ b
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
board/freescale/ls1088a/eth_ls1088aqds.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/board/freescale/ls1088a/eth_ls1088aqds.c
b/board/freescale/ls1088a/eth_ls1088aqds.c
index 7fe446e..d09e077 100644
--- a/board/freescale/l
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
v2: Rebase to top
configs/ls1088aqds_defconfig | 3 +++
configs/ls1088aqds_qspi_SECURE_BOOT_defconfig| 3 +++
configs/ls1088aqds_qspi_defconfig| 3 +++
c
and DSPI cannot be accessed in this defconfig.
IFC-NOR image is generated by ls1088aqds_defconfig.
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
depends upon:
http://patchwork.ozlabs.org/project/uboot/list/?series=29287
v2:
Remove hardcoded timing for sys, ddr clock
Remove har
This function is required for enabling access to
early i2c function for correct usage of QIXIS_READ
and QIXIS_WRITE
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
board/freescale/ls1088a/ls1088a.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/board/freescale/ls1088a/ls1088
get_board_ddr_clk(), get_board_sys_clk() and if_board_diff_clk() is now
valid for CONFIG_SPL_BUILD
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
board/freescale/ls1088a/ls1088a.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/freescale/ls1088a/ls1088
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
include/configs/ls1088aqds.h | 16
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 5674a5d..1f2161b 100644
--- a/include/configs/ls1088
Hello York,
This fixes the crash on LS1088 sd-boot.
Regards
Ashish
> -Original Message-
> From: York Sun
> Sent: Friday, February 16, 2018 9:21 PM
> To: Ashish Kumar <ashish.ku...@nxp.com>; u-boot@lists.denx.de
> Cc: Pankit Garg <pankit.g...@nxp.com>;
e env lookup function".
Did anyone face similar issue?
I reached this commit("8a3a7e22") after running git bisect.
Log embedded in below mail chain.
Regards
Ashish
> -Original Message-
> From: Ashish Kumar
> Sent: Thursday, February 8, 2018 3:51 PM
> To: Maxime R
-Original Message-
From: York Sun
Sent: Tuesday, January 30, 2018 2:54 AM
To: Ashish Kumar <ashish.ku...@nxp.com>; u-boot@lists.denx.de
Subject: Re: [PATCH] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088
On 01/01/2018 09:24 PM, Ashish Kumar wrote:
> IFC-NOR and QSPI
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
RESEND: Patch is not see in patchworks
configs/ls1088aqds_sdcard_qspi_defconfig | 1 +
configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 1 +
configs/ls1088ardb_sdcard_qspi_defconfig | 1 +
3 files chan
Hello all,
It should be [PATCH 1/1]. This is not part of any patch set
Regards
Ashish
> -Original Message-
> From: Ashish Kumar [mailto:ashish.ku...@nxp.com]
> Sent: Friday, January 19, 2018 3:54 PM
> To: u-boot@lists.denx.de
> Cc: York Sun <york....@nxp.com>; As
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
configs/ls1088aqds_defconfig | 3 +++
configs/ls1088aqds_qspi_SECURE_BOOT_defconfig| 3 +++
configs/ls1088aqds_qspi_defconfig| 3 +++
configs/ls1088aqds_sdcard_ifc_defconfig
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
include/configs/ls1088aqds.h | 4
include/configs/ls1088ardb.h | 2 ++
2 files changed, 6 insertions(+)
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index d5075c3..5ff632c 100644
--- a/include/c
set ifc' : switch to ifc
'=> qixis_reset emmc' : switch to emmc
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
board/freescale/common/qixis.c | 22 ++
1 file changed, 22 insertions(+)
diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c
i
> -Original Message-
> From: York Sun
> Sent: Monday, January 15, 2018 11:36 PM
> To: Ashish Kumar <ashish.ku...@nxp.com>; u-boot@lists.denx.de
> Subject: Re: [PATCH v2 2/2] armv8: ls1088ardb: Add environment variable
> address location for QSPI-NOR
>
>
> -Original Message-
> From: York Sun
> Sent: Monday, January 08, 2018 11:53 PM
> To: Ashish Kumar <ashish.ku...@nxp.com>; u-boot@lists.denx.de; Simon
> Glass <s...@chromium.org>; Jagan Teki <ja...@openedev.com>
> Subject: Re: [PATCH v2 1/2] env: sf: A
> -Original Message-
> From: York Sun
> Sent: Monday, January 08, 2018 11:15 PM
> To: Ashish Kumar <ashish.ku...@nxp.com>; u-boot@lists.denx.de
> Subject: Re: [PATCH] armv8: ls1088: Add USB and PCI configs in SD-BOOT
> defconfig
>
> On 01/01/2018 09:24 PM,
> -Original Message-
> From: York Sun
> Sent: Monday, January 08, 2018 11:11 PM
> To: Ashish Kumar <ashish.ku...@nxp.com>; u-boot@lists.denx.de
> Subject: Re: [PATCH] armv8: ls1088aqds: Add IFC-NOR as boot source for
> LS1088
>
> On 01/01/2018 09:24 PM, A
Remove distro related stuff from SPL-uboot to save on SPL size.
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
Signed-off-by: Pankit Garg <pankit.g...@nxp.com>
---
Size reduction is approx 5K
depends upon
http://patchwork.ozlabs.org/patch/853615/
http://patchwork.ozlabs.org/
> -Original Message-
> From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Ashish
> Kumar
> Sent: Thursday, November 09, 2017 10:46 AM
> To: York Sun <york@nxp.com>; u-boot@lists.denx.de; Prabhakar Kushwaha
> <prabhakar.kushw...@nxp.com>
and DSPI cannot be accessed in this defconfig.
IFC-NOR image is generated by ls1088aqds_defconfig.
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
depends on: https://patchwork.ozlabs.org/patch/853615/
Tested on 2018.01-rc3
More accurate timing are used which where provided by
vali
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
depends on: https://patchwork.ozlabs.org/patch/853615/
Tested on 2018.01-rc3
configs/ls1088aqds_sdcard_qspi_defconfig | 12
configs/ls1088ardb_sdcard_qspi_defconfig | 12
2 files changed, 24 insertions(+)
Total size of relocated u-boot is greater than
current value of 512KB, increase this to 1MB.
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
v2:
Correct commit msg 512KB
include/configs/ls1088a_common.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/c
Total size of relocated u-boot is greater than
current value of 512MB, increase this to 1MB.
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
include/configs/ls1088a_common.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/ls1088a_common.h b/i
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
include/configs/ls1088a_common.h | 6 ++
include/configs/ls1088aqds.h | 1 -
include/configs/ls1088ardb.h | 2 +-
3 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/include/configs/ls1088a_common.h b/include/c
ENV variables can now be used before relocation.
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
v2:
replace & with && in #if
Tested on ls1088ardb.
Tested on ls1012hexa after defining CONFIG_ENV_ADDR
env/sf.c | 21 +
1 file changed, 21 insertions(+)
ENV variables can now be used before relocation.
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
Tested on ls1088ardb
Tested on ls1012 after adding CONFIG_ENV_ADDR in header files
env/sf.c | 21 +
1 file changed, 21 insertions(+)
diff --git a/env/sf.c b/en
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
include/configs/ls1088ardb.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 1da8153..56416de 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
---
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 47145a2..3716e9c 100644
---
1 - 100 of 237 matches
Mail list logo