Hi!
>
> Hi!
>
> On 06/27/2016 11:10 AM, Christian Didriksson wrote:
> > Hi,
> >
> >> On 06/23/2016 06:31 PM, Sylvain Lesne wrote:
> >>> On 06/23/2016 06:14 PM, Marek Vasut wrote:
> >>>> On 06/23/2016 05:58 PM, Sylvain Lesne wrote:
>
Hi,
> On 06/23/2016 06:31 PM, Sylvain Lesne wrote:
> > On 06/23/2016 06:14 PM, Marek Vasut wrote:
> >> On 06/23/2016 05:58 PM, Sylvain Lesne wrote:
> >>> Hi Marek, Christian,
> >>
> >> Hi,
> >>
> >>> On 06/23/2016 03:07 PM, M
Hi Marek,
[..]
I skipped booting from QSPI and started all over with a vanilla 2016.05 and
built the u-boot-with-spl.sfp. Put it on an SD-card and booted:
U-Boot SPL 2016.05-gbb88b7b-dirty (Jun 22 2016 - 14:53:14)
drivers/ddr/altera/sequencer.c: Preparing to start memory calibration
drivers/ddr
> On 06/21/16 17:30, Christian Didriksson wrote:
> > Some more comments inline
> >
> >>
> >>> On 06/20/2016 06:04 PM, Christian Didriksson wrote:
> >>>> Hi,
> >>>
> >>> Hi,
> >>>
> >&
Some more comments inline
>
> > On 06/20/2016 06:04 PM, Christian Didriksson wrote:
> > > Hi,
> >
> > Hi,
> >
> > >> On 06/20/2016 03:22 PM, Christian Didriksson wrote:
> > >>> Hi Marek,
> > >>
> > >> Hi,
> On 06/20/2016 06:04 PM, Christian Didriksson wrote:
> > Hi,
>
> Hi,
>
> >> On 06/20/2016 03:22 PM, Christian Didriksson wrote:
> >>> Hi Marek,
> >>
> >> Hi,
> >>
> >>>> On 06/17/2016 04:39 PM, Christian Didr
Hi,
> On 06/20/2016 03:22 PM, Christian Didriksson wrote:
> > Hi Marek,
>
> Hi,
>
> >> On 06/17/2016 04:39 PM, Christian Didriksson wrote:
> >>> Hi Marek,
> >>
> >> Hi
> >>
> >>> I applied the two patches you sug
Hi Marek,
> On 06/17/2016 04:39 PM, Christian Didriksson wrote:
> > Hi Marek,
>
> Hi
>
> > I applied the two patches you suggested, but got no change in behavior:
> >
> > U-Boot SPL 2016.05-ga0bd0e7-dirty (Jun 17 2016 - 16:32:35)
> > drivers/ddr/alt
> On 06/16/2016 12:13 PM, Christian Didriksson wrote:
> > Hi!
>
> Hi,
>
> >> On 06/15/2016 12:06 PM, Christian Didriksson wrote:
> >>> Trying again.
> >>
> >> Hi!
> >>
> >>> I have reverted back to a vanilla u-boot-
Hi!
> On 06/15/2016 12:06 PM, Christian Didriksson wrote:
> > Trying again.
>
> Hi!
>
> > I have reverted back to a vanilla u-boot-2016.05, added the
> > not-enter-quad-mode patch
>
> What's this patch ? Can you share it ?
>
These are the changes
2016.05)? U-boot hangs after printing memory size. Same result using
different compilers.
Best regards,
Christian
-Ursprungligt meddelande-
Från: U-Boot [mailto:u-boot-boun...@lists.denx.de] För Christian Didriksson
Skickat: den 9 juni 2016 20:15
Till: u-boot@lists.denx.de
Ämne: [U-Boot
Hi All,
I have been struggling for quite some time now to get SPL and u-boot to run
from QSPI-flash. Yesterday I was able to identify a workaround to get the SPL
going by disabling quad mode for the flash (seems identified by
http://lists.denx.de/pipermail/u-boot/2016-June/256671.html). However
12 matches
Mail list logo
