Steve Sakoman <sakoman <at> gmail.com> writes: > > On Fri, Oct 1, 2010 at 10:59 PM, John Tobias <jtobias <at> viaas.com> wrote: > > Hi Steve, > > Thanks for the response. The processor is OMAP4 and I am in the last stage > > of bringing up the board. I took the source code from the omapzoom git tree. > > How do I know if pre or post relocation changes? > > If you took the code from the omap4-dev branches of omapzoom then the > recent relocation changes are not an issue, since that code is based > on a u-boot release from 4 years ago! > > Given that, folks here on the u-boot list aren't too likely to be the > right resource for help on such an old code base. If you want to > stick with that code, then TI's E2E site is probably your best bet for > support. > > However, I recommend you switch to mainline u-boot v2010.09, released > just this week. I have added support for the OMAP4 Panda and SDP4430, > so these should serve as good examples for your board. > > Steve >
Hi Steve, I was having a similar problem on a TI Blaze (OMAP4) board, and took your advice. Moved up to the v2010.12, configured it for omap4_sdp4430_config, and was able to boot into Android successfully. Thanks! Matthew _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot