Hi, I am currently going through the bring up of a Freescale MPC8536 based system. We use a SATA hard drive to boot from.
I seem to have a problem reading ext2 filesystems created on a Fedora 11 system. I have checked the FAQ for something related to this. If I create the filesystem on the 8536 eval system everything seems to work fine. However if I create an ext2 filesystem on my desktop (F11) with mkfs.ext2 then U-Boot cannot read anything. Below are some examples of the responses I get. I am using a Freescale patched U-Boot version 2009.03-rc1. Regardless of where I created the filesystem it always shows up as ext2 on my desktop. Any pointers or clues? Thanks, Mike => sata init SATA0 (1.5 Gbps) SATA1 (No RDY) => sata part Partition Map for SATA device 0 -- Partition Type: DOS Partition Start Sector Num Sectors Type 1 63 38555937 83 2 38556000 38556000 83 3 77112000 40098240 83 => ext2ls sata 0:1 /boot ** Can not find directory. ** ** Error ext2fs_ls() ** => ext2ls sata 0:1 / => _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot