On Wed, Oct 20, 2021 at 4:31 AM Roman Bacik wrote:
>
> From: Rayagonda Kokatanur
>
> IPROC qspi driver supports both BSPI and MSPI modes.
>
> Signed-off-by: Rayagonda Kokatanur
> Signed-off-by: Bharat Gooty
> Acked-by: Rayagonda Kokatanur
>
> Signed-off-by:
On Mon, Sep 13, 2021 at 11:29 AM Priyanka Jain (OSS)
wrote:
>
>
>
> >-Original Message-
> >From: U-Boot On Behalf Of Z.Q. Hou
> >Sent: Friday, September 10, 2021 12:13 PM
> >To: Tom Rini ; u-boot@lists.denx.de;
> >rayagonda.kokata...@broadcom.com
> >Cc: Priyanka Jain
> >Subject: RE:
On Wed, Aug 25, 2021 at 6:55 PM Bharat Kumar Reddy Gooty
wrote:
>
> From: Rayagonda Kokatanur
>
> IPROC qspi driver supports both BSPI and MSPI modes.
>
> Signed-off-by: Rayagonda Kokatanur
> Signed-off-by: Bharat Gooty
> ---
> drivers/spi/Kconfig |
On Tue, Aug 24, 2021 at 3:46 PM Bharat Kumar Reddy Gooty
wrote:
>
> From: Bharat Gooty
>
> Parse different gpio properties from dt as part of probe
> function. This detail is required to enable pinctrl pad
> later when gpio lines are requested.
>
> Signed-off-by: Rayag
On Tue, Aug 24, 2021 at 3:46 PM Bharat Kumar Reddy Gooty
wrote:
>
> From: Bharat Gooty
>
> Add pinctrl_ops->request api to configure pctrl
> pad register in gpio mode.
>
> Signed-off-by: Rayagonda Kokatanur
> Signed-off-by: Bharat Gooty
> ---
> driv
From: Bharat Gooty
Add tuning functionality which is needed for HS200 mode.
For HS200, program the correct needed 1.8 voltage
Signed-off-by: Bharat Gooty
Signed-off-by: Rayagonda Kokatanur
---
Changes from v1:
--Address review comments from Jaehoon Chung,
Add comment for udelay
Move
On Wed, Feb 10, 2021 at 3:12 AM Jaehoon Chung wrote:
>
> Hi Rayagonda,
>
> On 2/9/21 1:34 PM, Rayagonda Kokatanur wrote:
> > From: Bharat Gooty
> >
> > Add tuning functionality which is needed for HS200 mode.
> > For HS200, program the correct
From: Bharat Gooty
Add tuning functionality which is needed for HS200 mode.
For HS200, program the correct needed 1.8 voltage
Signed-off-by: Bharat Gooty
Signed-off-by: Rayagonda Kokatanur
---
drivers/mmc/iproc_sdhci.c | 88 +++
1 file changed, 79
u-boot configurations with environment saved in eMMC
and GPT support
Signed-off-by: Corneliu Doban
Signed-off-by: Rayagonda Kokatanur
---
Changes from v4:
-Address review comments from Thiru,
Use env_set_hex() instead of env_set_ulong() in two place.
Changes from v3:
-Address review
On Fri, Sep 25, 2020 at 9:29 PM jchludzinski
wrote:
> On 2020-09-25 07:13, Rayagonda Kokatanur wrote:
> > On Fri, Sep 25, 2020, 4:32 PM jchludzinski
> > wrote:
> >
> >> On 2020-09-24 17:36, jchludzinski wrote:
> >>> I'm trying to bring up an RTOS (vxw
On Fri, Sep 25, 2020, 4:32 PM jchludzinski wrote:
> On 2020-09-24 17:36, jchludzinski wrote:
> > I'm trying to bring up an RTOS (vxworks) using u-boot and have had
> > some "partial" success:
> >
> > If I use the 2014 u-boot that comes with Quartus 18.1 (a tarball in
> > the download), vxworks
On Tue, Sep 15, 2020 at 12:56 PM Michael Walle wrote:
>
> Hi Stefan,
>
> it appears that since commit 06985289d45 ("watchdog: Implement generic
> watchdog_reset() version") - by default - the first watchdog is started
> unconditionally if CONFIG_WDT is set but never stopped before booting
> the
Hi Stefan,
On Thu, Sep 10, 2020, 1:16 PM Stefan Roese wrote:
> On 10.09.20 07:58, Rayagonda Kokatanur wrote:
> > Hi Stefan,
> >
> > On Thu, Sep 10, 2020 at 10:53 AM Stefan Roese wrote:
> >>
> >> Hi Rayagonda,
> >>
> >> On 0
Hi Stefan,
On Thu, Sep 10, 2020 at 10:53 AM Stefan Roese wrote:
>
> Hi Rayagonda,
>
> On 09.09.20 19:15, Rayagonda Kokatanur wrote:
> > Hi Stefan,
> >
> > On Wed, Sep 9, 2020 at 1:57 PM Stefan Roese wrote:
> >>
> >> On 09.09.20 10:14, Pr
Hi Stefan,
On Wed, Sep 9, 2020 at 1:57 PM Stefan Roese wrote:
>
> On 09.09.20 10:14, Priyanka Jain wrote:
> > This is required to fix
> > "Error binding driver 'gic-v3': -96"
> > on lx2160a platforms.
> >
> > Signed-off-by: Priyanka Jain
> > ---
> > arch/arm/lib/gic-v3-its.c | 5 +
> > 1
Hi Stefan,
On Thu, Aug 27, 2020 at 5:01 PM Stefan Roese wrote:
>
> Hi Rayagonda,
>
> On 26.07.20 19:07, Rayagonda Kokatanur wrote:
> > Use device tree and UCLASS_IRQ driver to get following
> > Generic Interrupt Controller (GIC) details,
> >
> > -GIC Distr
ease let me know.
Best regards,
Rayagonda
>
>
> Thanks
>
> Priyanka
>
>
>
> *From:* Rayagonda Kokatanur
> *Sent:* Friday, September 4, 2020 10:50 PM
> *To:* Priyanka Jain
> *Cc:* Z.q. Hou ; Wasim Khan ;
> Bharat Gooty ; Manish Tomar <
> manish.to
Chimp is a core in Broadcom netxtream controller (bnxt).
Add support to check bnxt's chimp component status.
Signed-off-by: Rayagonda Kokatanur
---
Changes from V1:
-Address review comments from Simon,
Add comment about chimp failure.
board/broadcom/bcmns3/ns3.c | 17 +
1
Hi Simon,
On Sat, Aug 22, 2020 at 8:39 PM Simon Glass wrote:
>
> Hi Rayagonda,
>
> On Thu, 20 Aug 2020 at 11:42, Rayagonda Kokatanur
> wrote:
> >
> > Chimp is a core in Broadcom netxtream controller (bnxt).
> > Add support to check bnxt's chimp component status.
Chimp is a core in Broadcom netxtream controller (bnxt).
Add support to check bnxt's chimp component status.
Signed-off-by: Rayagonda Kokatanur
---
board/broadcom/bcmns3/ns3.c | 13 +
1 file changed, 13 insertions(+)
diff --git a/board/broadcom/bcmns3/ns3.c b/board/broadcom/bcmns3
Hi Tom,
On Sat, Aug 15, 2020 at 1:22 AM Tom Rini wrote:
>
> On Sun, May 17, 2020 at 02:02:55PM +0530, Rayagonda Kokatanur wrote:
>
> > From: Sheetal Tigadoli
> >
> > Add error logging support in uboot for ns3 platform.
> >
> > We log the bootup m
Update MAINTAINERS file for new files.
Signed-off-by: Rayagonda Kokatanur
---
MAINTAINERS | 4
1 file changed, 4 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 17ac45587b..2b00674d65 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1005,6 +1005,10 @@ F: arch/arm/dts/ns3
From: Bharat Kumar Reddy Gooty
Add command for chimp handshake.
Handshake is used to know chimp is loaded and booted successfully.
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
Changes from V1:
-Address review comments from Simon
From: Vladimir Olovyannikov
Extend Kconfig for the board with board-specific commands selection.
Signed-off-by: Vladimir Olovyannikov
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
board/broadcom/bcmns3/Kconfig | 7 +++
cmd/Makefile | 2 ++
2 files
From: Vikas Gupta
Add command to update the environmental variables which
are used to read the data from QSPI offsets and load
the binaries to bnxt.
Signed-off-by: Vikas Gupta
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
Changes from V1:
-Address review comments from
From: Trac Hoang
Chimp is a core in Broadcom netxtream controller (bnxt).
Add command to load binary to chimp and boot bnxt.
Signed-off-by: Trac Hoang
Signed-off-by: Rayagonda Kokatanur
---
Changes from V1:
-Address review comments from Simon,
Update commit message.
Rearrange header
cast.
Check returun value for env_set_hex().
Remove use of typedef.
Command description correction.
Bharat Kumar Reddy Gooty (1):
cmd: broadcom: add command for chimp handshake
Rayagonda Kokatanur (1):
MAINTAINERS: update maintainers file for new files
Trac Hoang (1):
cmd
Hi Tom,
On Sat, Jun 27, 2020 at 1:31 AM Tom Rini wrote:
>
> On Thu, Jun 25, 2020 at 10:57:09PM +0530, Rayagonda Kokatanur wrote:
> > Hi Tom,
> >
> >
> > On Sun, Apr 12, 2020 at 8:46 PM Rayagonda Kokatanur
> > wrote:
> > >
> &g
Use device tree and UCLASS_IRQ driver to get following
Generic Interrupt Controller (GIC) details,
-GIC Distributor interface (GICD) base address and
-GIC Redistributors (GICR) base address.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
Changes from v3:
-Address review
Use device tree and UCLASS_SYSCON driver to get
Generic Interrupt Controller (GIC) lpi address and
maximum GIC redistributors count.
Also update Kconfig to select REGMAP and SYSCON when
GIC_V3_ITS is enabled.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
Changes from v3
comments from Tom Rini,
Fix build errors messages.
Changes from v1:
-Address review comments from Tom Rini,
Fix build warning messages.
Rayagonda Kokatanur (2):
arch: arm: use dt and UCLASS_IRQ to get gic details
arch: arm: use dt and UCLASS_SYSCON to get gic lpi details
arch/arm/Kconfig
u-boot configurations with environment saved in eMMC
and GPT support
Signed-off-by: Corneliu Doban
Signed-off-by: Rayagonda Kokatanur
---
Changes from v3:
-Address review comments from Simon Glass,
Return -ve number instead of 1 upon failure,
Use shorter variable name,
Modified code
Hi Simon,
On Sat, May 16, 2020 at 2:33 AM Simon Glass wrote:
>
> Hi Rayagonda,
>
> On Wed, 13 May 2020 at 09:28, Rayagonda Kokatanur
> wrote:
> >
> > From: Corneliu Doban
> >
> > Add eMMC and GPT support.
> > - GPT partition list and command to cre
Hi Jagan,
On Sun, May 17, 2020 at 12:54 PM Rayagonda Kokatanur
wrote:
>
> This patchset,
> -adds Broadcom SPI driver for iproc-based platforms and
> -extends Micron SPI commands for dual and quad SPI transfers on Micon SPI.
>
> Changes from v1:
> -Address review com
Use device tree and UCLASS_IRQ driver to get following
Generic Interrupt Controller (GIC) details,
-GIC Distributor interface (GICD) base address and
-GIC Redistributors (GICR) base address.
Signed-off-by: Rayagonda Kokatanur
---
Changes from v1:
-Address review comments from Tom Rini,
Fix
Use device tree and UCLASS_SYSCON driver to get
Generic Interrupt Controller (GIC) lpi address and
maximum GIC redistributors count.
Also update Kconfig to select REGMAP and SYSCON when
GIC_V3_ITS is enabled.
Signed-off-by: Rayagonda Kokatanur
---
Changes from v2:
-Address review comments from
from Tom Rini,
Fix build warning messages.
Rayagonda Kokatanur (2):
arch: arm: use dt and UCLASS_IRQ to get gic details
arch: arm: use dt and UCLASS_SYSCON to get gic lpi details
arch/arm/Kconfig| 2 +
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 28 +
arch/arm
Hi Simon,
On Sat, Jul 18, 2020 at 8:14 PM Rayagonda Kokatanur
wrote:
>
> Use device tree and driver class (UCLASS_IRQ and UCLASS_SYSCON) to get
> gic details like GICD, GICR base address, max number of redistributors
> and git lpi address.
>
> Changes from v1:
> -Address
Use device tree and UCLASS_SYSCON driver to get
Generic Interrupt Controller (GIC) lpi address and
maximum GIC redistributors count.
Also update Kconfig to select REGMAP and SYSCON when
GIC_V3_ITS is enabled.
Signed-off-by: Rayagonda Kokatanur
---
arch/arm/Kconfig | 2 ++
arch
Use device tree and UCLASS_IRQ driver to get following
Generic Interrupt Controller (GIC) details,
-GIC Distributor interface (GICD) base address and
-GIC Redistributors (GICR) base address.
Signed-off-by: Rayagonda Kokatanur
---
Changes from v1:
-Address review comments from Tom Rini,
Fix
Use device tree and driver class (UCLASS_IRQ and UCLASS_SYSCON) to get
gic details like GICD, GICR base address, max number of redistributors
and git lpi address.
Changes from v1:
-Address review comments from Tom Rini,
Fix build warning messages.
Rayagonda Kokatanur (2):
arch: arm: use dt
Hi Simon,
On Wed, Jul 8, 2020 at 12:45 PM Rayagonda Kokatanur
wrote:
>
> Use device tree and driver class (UCLASS_IRQ and UCLASS_SYSCON) to get
> gic details like GICD, GICR base address, max number of redistributors
> and git lpi address.
>
> Rayagonda Kokatanur (2):
>
Enable tee and optee drivers.
Signed-off-by: Vikas Gupta
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
configs/bcm_ns3_defconfig | 5 -
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 0e078f3244
ments from Simon Glass,
Move c file from board/broadcom/bcmns3/chimp_optee.c to
drivers/tee/broadcom,
Move header file from include/brcm/chimp.h to include/broadcom/chimp.h
Rayagonda Kokatanur (1):
configs: ns3: enable tee and optee driver
Vikas Gupta (1):
drivers: tee: broadcom: add optee
From: Vikas Gupta
Add optee based bnxt fw load driver.
bnxt is Broadcom NetXtreme controller Ethernet card.
This driver is used to load bnxt firmware binary using OpTEE.
Signed-off-by: Vikas Gupta
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
Changes from v4
From: Pramod Kumar
Add development keys used in FIT.
Signed-off-by: Pramod Kumar
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
board/broadcom/bcmns3/fit/keys/dev.crt | 21 +++
board/broadcom/bcmns3/fit/keys/dev.key | 28 ++
2 files
Enable FIT config for NS3.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
configs/bcm_ns3_defconfig | 5 +
1 file changed, 5 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index ab26617158..0e078f3244 100644
--- a/configs
From: Pramod Kumar
Add FIT image its file.
Signed-off-by: Pramod Kumar
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
board/broadcom/bcmns3/fit/multi.its | 59 +
1 file changed, 59 insertions(+)
create mode 100644 board/broadcom/bcmns3/fit
cond patch set.
Changes from v1:
-Address self review comments,
Rebase on top of latest uboot and updated previous patch series.
Pramod Kumar (2):
board: ns3: add FIT image its file
board: ns3: add development keys used in FIT
Rayagonda Kokatanur (1):
configs: ns3: enable FIT conf
Add NS3 pads definitions.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
.../dt-bindings/pinctrl/brcm,pinctrl-ns3.h| 41 +++
1 file changed, 41 insertions(+)
create mode 100644 include/dt-bindings/pinctrl/brcm,pinctrl-ns3.h
diff --git a/include/dt
Enable mmc commands for NS3.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
configs/bcm_ns3_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 432237b56d..a1ee866e54 100644
--- a/configs/bcm_ns3_defconfig
Enable sp805 watchdog driver for ns3.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
configs/bcm_ns3_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 66fbdb20d6..ab26617158 100644
--- a/configs
Enable gpt commands for ns3.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
configs/bcm_ns3_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index a1ee866e54..0f23f30db2 100644
--- a/configs/bcm_ns3_defconfig
Enable BCM IPROC mmc driver ns3.
Enable DMA for MMC Host to have better reads and writes.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
configs/bcm_ns3_defconfig | 4
1 file changed, 4 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
Enable EXT4 and FAT fs support for ns3.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
configs/bcm_ns3_defconfig | 5 +
1 file changed, 5 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 0f23f30db2..66fbdb20d6 100644
--- a/configs
w comments from Tom and Simon,
Remove all dt patches as uboot should use the same dt file from Linux.
Rayagonda Kokatanur (7):
configs: ns3: enable pinctrl driver
dt-bindings: pinctrl: add ns3 pads definition
configs: ns3: enable BCM IPROC mmc driver
configs: ns3: enable mmc commands
co
Enable pinctrl driver for ns3.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
configs/bcm_ns3_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 9adb44cb51..328b0e2b4e 100644
--- a/configs
Update MAINTAINERS for broadcom ns3 platform (TARGET_NS3).
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
MAINTAINERS | 15 +++
1 file changed, 15 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 2a281a9a0f..f96993b84c 100644
--- a/MAINTAINERS
+++ b
Add README doc for bcmns3 platform.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
doc/README.bcmns3 | 74 +++
1 file changed, 74 insertions(+)
create mode 100644 doc/README.bcmns3
diff --git a/doc/README.bcmns3 b/doc/README.bcmns3
From: Bharat Gooty
Add support for flashing images into QSPI and eMMC.
Signed-off-by: Bharat Gooty
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
include/configs/bcm_ns3.h | 491 +-
1 file changed, 490 insertions(+), 1 deletion(-)
diff
0xFF00_ and end 0x1__
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
board/broadcom/bcmns3/ns3.c | 22 +++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/board/broadcom/bcmns3/ns3.c b/board
Add ddr memory definitions.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
include/dt-bindings/memory/bcm-ns3-mc.h | 31 -
1 file changed, 30 insertions(+), 1 deletion(-)
diff --git a/include/dt-bindings/memory/bcm-ns3-mc.h
b/include/dt-bindings
Enables the Generic Interrupt Controller (GIC) V3
Interrupt Translation Service (ITS) Locality-specific Peripheral
Interrupts (LPI) configuration table and LPI table.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Kumar Reddy Gooty
Reviewed-by: Simon Glass
---
configs
From: Bharat Gooty
Add env variables and commands for booting Linux.
Signed-off-by: Bharat Gooty
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
include/configs/bcm_ns3.h | 294 ++
1 file changed, 294 insertions(+)
diff --git a/include
Add both DRAM banks memory information and
the corresponding MMU page table mappings.
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
arch/arm/dts/ns3-board.dts | 23
board/broadcom/bcmns3/ns3.c | 106
Add NS3 memory definitions.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
Changes from v4:
-Address self review comments,
Correction u-boot to U-Boot.
include/dt-bindings/memory/bcm-ns3-mc.h | 34 +
1 file changed, 34 insertions(+)
create mode
Ravi
Signed-off-by: Vladimir Olovyannikov
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
Changes from v4:
-Address self review comments,
Correction- u-boot to U-Boot
U-boot programs the GIC LPI configuration tables and enables
the LPI table.
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
board/broadcom/bcmns3/ns3.c | 10 ++
1 file changed, 10 insertions(+)
diff --git a/board/broadcom/bcmns3
Enable clock subsystem for ns3.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
configs/bcm_ns3_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index a81541e394..7e51a926f7 100644
--- a/configs
Default "reset" from U-Boot to L3 reset.
"reset" command with argument will trigger L1 reset.
Signed-off-by: Rajesh Ravi
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
Changes from v4:
-Address review comments from
Add L3 memory flush support for NS3.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
arch/arm/cpu/armv8/Makefile | 1 +
arch/arm/cpu/armv8/bcmns3/Makefile | 5 ++
arch/arm/cpu/armv8/bcmns3/lowlevel.S | 89
3 files changed, 95 insertions
):
board: ns3: add api to save boot parameters passed from BL31
Bharat Gooty (2):
include/configs: ns3: add env variables for Linux boot
include/configs: ns3: add support for flashing images
Bharat Kumar Reddy Gooty (1):
board: ns3: limit U-boot relocation within 16MB memory
Rayagonda
Add support for Broadcom Northstar 3 SoC.
NS3 is a octo-core 64-bit ARMv8 Cortex-A72 processors
targeting a broad range of networking applications.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
arch/arm/Kconfig | 10 ++
arch/arm/dts/Makefile | 2
On Wed, Jul 15, 2020 at 6:59 PM Tom Rini wrote:
>
> On Fri, Jul 10, 2020 at 02:22:19PM +0530, Rayagonda Kokatanur wrote:
>
> > Add README doc for bcmns3 platform.
> >
> > Signed-off-by: Rayagonda Kokatanur
> > ---
> > doc/README.bcmns3 | 74 +++
Enable tee and optee drivers.
Signed-off-by: Vikas Gupta
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
configs/bcm_ns3_defconfig | 5 -
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 0e078f3244
From: Vikas Gupta
Add optee based bnxt fw load driver.
bnxt is Broadcom NetXtreme controller Ethernet card.
This driver is used to load bnxt firmware binary using OpTEE.
Signed-off-by: Vikas Gupta
Signed-off-by: Rayagonda Kokatanur
---
Changes from v3:
-Address review comments from Simon
rivers/tee/broadcom,
Move header file from include/brcm/chimp.h to include/broadcom/chimp.h
Rayagonda Kokatanur (1):
configs: ns3: enable tee and optee driver
Vikas Gupta (1):
drivers: tee: broadcom: add optee based bnxt fw load driver
configs/bcm_ns3_defconfig | 5 +-
drivers/t
From: Pramod Kumar
Add FIT image its file.
Signed-off-by: Pramod Kumar
Signed-off-by: Rayagonda Kokatanur
---
board/broadcom/bcmns3/fit/multi.its | 59 +
1 file changed, 59 insertions(+)
create mode 100644 board/broadcom/bcmns3/fit/multi.its
diff --git a/board
From: Pramod Kumar
Add development keys used in FIT.
Signed-off-by: Pramod Kumar
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
board/broadcom/bcmns3/fit/keys/dev.crt | 21 +++
board/broadcom/bcmns3/fit/keys/dev.key | 28 ++
2 files
Enable FIT config for NS3.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
configs/bcm_ns3_defconfig | 5 +
1 file changed, 5 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index ab26617158..0e078f3244 100644
--- a/configs
w comments,
Rebase on top of latest uboot and updated previous patch series.
Pramod Kumar (2):
board: ns3: add FIT image its file
board: ns3: add development keys used in FIT
Rayagonda Kokatanur (1):
configs: ns3: enable FIT config
board/broadcom/bcmns3/fit/keys/dev.crt | 21 ++
Enable gpt commands for ns3.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
configs/bcm_ns3_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index a1ee866e54..0f23f30db2 100644
--- a/configs/bcm_ns3_defconfig
Enable sp805 watchdog driver for ns3.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
configs/bcm_ns3_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 66fbdb20d6..ab26617158 100644
--- a/configs
Enable EXT4 and FAT fs support for ns3.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
configs/bcm_ns3_defconfig | 5 +
1 file changed, 5 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 0f23f30db2..66fbdb20d6 100644
--- a/configs
Enable BCM IPROC mmc driver ns3.
Enable DMA for MMC Host to have better reads and writes.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
configs/bcm_ns3_defconfig | 4
1 file changed, 4 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
Enable mmc commands for NS3.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
configs/bcm_ns3_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 432237b56d..a1ee866e54 100644
--- a/configs/bcm_ns3_defconfig
Enable pinctrl driver for ns3.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
configs/bcm_ns3_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 9adb44cb51..328b0e2b4e 100644
--- a/configs
Add NS3 pads definitions.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
.../dt-bindings/pinctrl/brcm,pinctrl-ns3.h| 41 +++
1 file changed, 41 insertions(+)
create mode 100644 include/dt-bindings/pinctrl/brcm,pinctrl-ns3.h
diff --git a/include/dt
s as uboot should use the same dt file from Linux.
Rayagonda Kokatanur (7):
configs: ns3: enable pinctrl driver
dt-bindings: pinctrl: add ns3 pads definition
configs: ns3: enable BCM IPROC mmc driver
configs: ns3: enable mmc commands
configs: ns3: enable gpt commands
configs: ns3: enable EX
Update MAINTAINERS for broadcom ns3 platform (TARGET_NS3).
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
Changes from v3:
-Address review comments from Simon,
Update new file doc/README.bcmns3
-Address review comments from Peter Tyser,
Fix accidental changes
Add README doc for bcmns3 platform.
Signed-off-by: Rayagonda Kokatanur
---
doc/README.bcmns3 | 74 +++
1 file changed, 74 insertions(+)
create mode 100644 doc/README.bcmns3
diff --git a/doc/README.bcmns3 b/doc/README.bcmns3
new file mode 100644
From: Bharat Gooty
Add env variables and commands for booting Linux.
Signed-off-by: Bharat Gooty
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
Changes from v3:
-Address review comments from Simon,
Move the documentation to /doc instead of in header file.
include
From: Bharat Gooty
Add support for flashing images into QSPI and eMMC.
Signed-off-by: Bharat Gooty
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
include/configs/bcm_ns3.h | 491 +-
1 file changed, 490 insertions(+), 1 deletion(-)
diff
U-boot programs the GIC LPI configuration tables and enables
the LPI table.
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
---
Changes from v3:
-Address review comments from Simon,
Use dt and a UCLASS_IRQ to get gic details instead of passing
as arguments
Enables the Generic Interrupt Controller (GIC) V3
Interrupt Translation Service (ITS) Locality-specific Peripheral
Interrupts (LPI) configuration table and LPI table.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Kumar Reddy Gooty
Reviewed-by: Simon Glass
---
Changes from v3
Add both DRAM banks memory information and
the corresponding MMU page table mappings.
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
Changes from v3:
-Address review comments from Simon,
Correct spelling mistakes,
Use a struct
Add ddr memory definitions.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
Changes from v3:
-Address review comments from Simon,
Use lower-case hex numbers.
include/dt-bindings/memory/bcm-ns3-mc.h | 31 -
1 file changed, 30 insertions(+), 1
0xFF00_ and end 0x1__
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
Changes from v3:
-Address review comments from Simon,
Update the commit message.
board/broadcom/bcmns3/ns3.c | 22 +++---
1 file
Default "reset" from U-Boot to L3 reset.
"reset" command with argument will trigger L1 reset.
Signed-off-by: Rajesh Ravi
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
---
Changes from v3:
-Address review comments from Simon,
Update commit
Add NS3 memory definitions.
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Simon Glass
---
Changes from v3:
-Address review comments from Simon,
Use lower-case hex number
include/dt-bindings/memory/bcm-ns3-mc.h | 34 +
1 file changed, 34 insertions(+)
create
1 - 100 of 376 matches
Mail list logo