This config enables pxe get and pxe boot commands.
'pxe get' command loads configuration file at given RAM offset.
'pxe boot' command interprets this config file and boots Linux.
Signed-off-by: Rayagonda Kokatanur
---
configs/bcm_ns3_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git
From: Vikas Gupta
Add optee based bnxt fw load driver.
Signed-off-by: Vikas Gupta
Signed-off-by: Rayagonda Kokatanur
---
board/broadcom/bcmns3/Kconfig | 5 +
board/broadcom/bcmns3/Makefile | 1 +
board/broadcom/bcmns3/chimp_optee.c | 154
include
From: Vikas Gupta
Add support for optee
Signed-off-by: Vikas Gupta
Signed-off-by: Rayagonda Kokatanur
---
arch/arm/dts/ns3.dtsi | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/dts/ns3.dtsi b/arch/arm/dts/ns3.dtsi
index 6962e658d3..509818e23e 100644
--- a/arch/arm/dts/ns3
Enable tee and optee drivers.
Signed-off-by: Rayagonda Kokatanur
---
configs/bcm_ns3_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 1f565f3ad2..c6e7992b3a 100644
--- a/configs/bcm_ns3_defconfig
+++ b/configs
From: Pramod Kumar
Add development keys used in FIT.
Signed-off-by: Pramod Kumar
Signed-off-by: Rayagonda Kokatanur
---
board/broadcom/bcmns3/fit/keys/dev.crt | 21 +++
board/broadcom/bcmns3/fit/keys/dev.key | 28 ++
2 files changed, 49 insertions
to 512MB, the end address
is 0xB000_, whihc will not overlap with any binaries.
Signed-off-by: Rayagonda Kokatanur
---
configs/bcm_ns3_defconfig | 5 +
1 file changed, 5 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index a72a147179..d6d52d1880 100644
Add ddr memory definitions.
Signed-off-by: Rayagonda Kokatanur
---
include/dt-bindings/memory/bcm-ns3-mc.h | 30 -
1 file changed, 29 insertions(+), 1 deletion(-)
diff --git a/include/dt-bindings/memory/bcm-ns3-mc.h
b/include/dt-bindings/memory/bcm-ns3-mc.h
index
From: Ray Jui
Add both DRAM banks memory information and
the corresponding MMU page table mappings.
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
---
arch/arm/dts/ns3-board.dts | 23 ++
board/broadcom/bcmns3/ns3.c | 84
From: Pramod Kumar
Add FIT image its file.
Signed-off-by: Pramod Kumar
Signed-off-by: Rayagonda Kokatanur
---
board/broadcom/bcmns3/fit/multi.its | 59 +
1 file changed, 59 insertions(+)
create mode 100644 board/broadcom/bcmns3/fit/multi.its
diff --git a/board
From: Bharat Kumar Reddy Gooty
By default re-location happens to higher address of DDR,
i.e, DDR start + DDR size.
Limit re-location to happen within 16MB memory,
start 0xFF00_ and end 0x1__
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
---
board
Update NS3 GIC LPI address.
Signed-off-by: Rayagonda Kokatanur
---
include/dt-bindings/memory/bcm-ns3-mc.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/include/dt-bindings/memory/bcm-ns3-mc.h
b/include/dt-bindings/memory/bcm-ns3-mc.h
index b4f78584a5..d6e7717ba2 100644
--- a/include
From: Rajesh Ravi
Default "reset" from u-boot to L3 reset.
"reset" command with argument will trigger L1 reset.
Signed-off-by: Rajesh Ravi
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
---
board/broadcom/bcmns3/ns3.c | 20 ++--
Enables the GIC_V3 ITS LPI configuration table and
LPI table.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Kumar Reddy Gooty
---
configs/bcm_ns3_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index a3ba55d163
-by: Rayagonda Kokatanur
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Pramod Kumar
---
board/broadcom/bcmns3/ns3.c | 62 +
1 file changed, 62 insertions(+)
diff --git a/board/broadcom/bcmns3/ns3.c b/board/broadcom/bcmns3/ns3.c
index 0b9af6ad9b..80f6a516e3 100644
From: Bharat Kumar Reddy Gooty
U-boot programs the GIC LPI configuration tables and enables
the LPI table.
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
---
board/broadcom/bcmns3/ns3.c | 4
include/configs/bcm_ns3.h | 6 ++
2 files changed, 10
Ravi
Signed-off-by: Vladimir Olovyannikov
Signed-off-by: Rayagonda Kokatanur
---
arch/arm/cpu/armv8/bcmns3/lowlevel.S | 9 +++
arch/arm/include/asm/arch-bcmns3/bl33_info.h | 26
board/broadcom/bcmns3/ns3.c | 10
3 files changed, 45
From: Pramod Kumar
Add sp805 watchdog dts node for ns3.
Signed-off-by: Pramod Kumar
Signed-off-by: Rayagonda Kokatanur
---
arch/arm/dts/ns3.dtsi | 8
1 file changed, 8 insertions(+)
diff --git a/arch/arm/dts/ns3.dtsi b/arch/arm/dts/ns3.dtsi
index 9fd59a855e..6962e658d3 100644
Enable EXT4 and FAT fs support for ns3.
Signed-off-by: Rayagonda Kokatanur
---
configs/bcm_ns3_defconfig | 5 +
1 file changed, 5 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 3af8c91a4d..5ee5bea336 100644
--- a/configs/bcm_ns3_defconfig
+++ b
Enable sp805 watchdog driver for ns3.
Signed-off-by: Rayagonda Kokatanur
---
configs/bcm_ns3_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 5ee5bea336..a3ba55d163 100644
--- a/configs/bcm_ns3_defconfig
+++ b/configs
Enable gpt commands for ns3.
Signed-off-by: Rayagonda Kokatanur
---
configs/bcm_ns3_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index f8a20122ea..3af8c91a4d 100644
--- a/configs/bcm_ns3_defconfig
+++ b/configs
Enable mmc commands for NS3.
Signed-off-by: Rayagonda Kokatanur
---
configs/bcm_ns3_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index f94e7426c7..f8a20122ea 100644
--- a/configs/bcm_ns3_defconfig
+++ b/configs
Add QSPI node and qspi NOR flash node for NS3.
Signed-off-by: Rayagonda Kokatanur
---
arch/arm/dts/ns3-board.dts | 16
arch/arm/dts/ns3.dtsi | 9 +
2 files changed, 25 insertions(+)
diff --git a/arch/arm/dts/ns3-board.dts b/arch/arm/dts/ns3-board.dts
index
Add NS3 memory definitions.
Signed-off-by: Rayagonda Kokatanur
---
include/dt-bindings/memory/bcm-ns3-mc.h | 34 +
1 file changed, 34 insertions(+)
create mode 100644 include/dt-bindings/memory/bcm-ns3-mc.h
diff --git a/include/dt-bindings/memory/bcm-ns3-mc.h
b
From: Srinath Mannam
Add PAXB PCIe host controller and phy node for NS3.
Signed-off-by: Srinath Mannam
Signed-off-by: Rayagonda Kokatanur
---
arch/arm/dts/ns3-board.dts | 36 +
arch/arm/dts/ns3.dtsi | 158 +
2 files changed, 194 insertions
Add IPROC I2C node for NS3.
Signed-off-by: Rayagonda Kokatanur
---
arch/arm/dts/ns3-board.dts | 1 +
arch/arm/dts/ns3.dtsi | 6 ++
2 files changed, 7 insertions(+)
diff --git a/arch/arm/dts/ns3-board.dts b/arch/arm/dts/ns3-board.dts
index 6565f90f22..1155ff3ef1 100644
--- a/arch/arm
Add IPROC GPIO node for NS3.
Signed-off-by: Rayagonda Kokatanur
---
arch/arm/dts/ns3-board.dts | 1 +
arch/arm/dts/ns3.dtsi | 23 +++
2 files changed, 24 insertions(+)
diff --git a/arch/arm/dts/ns3-board.dts b/arch/arm/dts/ns3-board.dts
index 54e56879a5..92699910cb
Add pinctrl dt node for ns3.
Signed-off-by: Rayagonda Kokatanur
---
arch/arm/dts/ns3-pinctrl.dtsi | 321 ++
arch/arm/dts/ns3.dtsi | 2 +
2 files changed, 323 insertions(+)
create mode 100644 arch/arm/dts/ns3-pinctrl.dtsi
diff --git a/arch/arm/dts/ns3
As no gpio.h is defined for this architecture, to avoid
compilation failure, do not include for
arch bcmns3.
Signed-off-by: Rayagonda Kokatanur
---
arch/arm/include/asm/gpio.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm
From: Pramod Kumar
Add emmc dt nodes for ns3.
Signed-off-by: Pramod Kumar
Signed-off-by: Rayagonda Kokatanur
---
arch/arm/dts/ns3-board.dts | 4
arch/arm/dts/ns3.dtsi | 18 ++
2 files changed, 22 insertions(+)
diff --git a/arch/arm/dts/ns3-board.dts b/arch/arm/dts
Enable BCM IPROC mmc driver ns3.
Enable DMA for MMC Host to have better reads and writes.
Signed-off-by: Rayagonda Kokatanur
---
configs/bcm_ns3_defconfig | 4
1 file changed, 4 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 438e929b4b..f94e7426c7
Enable pinctrl driver for ns3.
Signed-off-by: Rayagonda Kokatanur
---
configs/bcm_ns3_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 7e51a926f7..438e929b4b 100644
--- a/configs/bcm_ns3_defconfig
+++ b/configs
Add clock dt node for ns3.
Signed-off-by: Rayagonda Kokatanur
---
arch/arm/dts/ns3-clock.dtsi | 34 ++
1 file changed, 34 insertions(+)
create mode 100644 arch/arm/dts/ns3-clock.dtsi
diff --git a/arch/arm/dts/ns3-clock.dtsi b/arch/arm/dts/ns3-clock.dtsi
new
Add NS3 pads definitions.
Signed-off-by: Rayagonda Kokatanur
---
.../dt-bindings/pinctrl/brcm,pinctrl-ns3.h| 41 +++
1 file changed, 41 insertions(+)
create mode 100644 include/dt-bindings/pinctrl/brcm,pinctrl-ns3.h
diff --git a/include/dt-bindings/pinctrl/brcm,pinctrl-ns3
Enable clock subsystem for ns3.
Signed-off-by: Rayagonda Kokatanur
---
configs/bcm_ns3_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index a81541e394..7e51a926f7 100644
--- a/configs/bcm_ns3_defconfig
+++ b/configs
Add L3 memory flush support for NS3.
Signed-off-by: Rayagonda Kokatanur
---
arch/arm/cpu/armv8/Makefile | 1 +
arch/arm/cpu/armv8/bcmns3/Makefile | 5 ++
arch/arm/cpu/armv8/bcmns3/lowlevel.S | 90
3 files changed, 96 insertions(+)
create mode 100644
Rayagonda Kokatanur (27):
board: ns3: add support for Broadcom Northstar 3
arm: cpu: armv8: add L3 memory flush support
configs: ns3: enable clock subsystem
arm: dts: ns3: add clock dt node
configs: ns3: enable pinctrl driver
dt-bindings: pinctrl: add ns3 pads definition
arm: dts: ns3
Add support for Broadcom Northstar 3 SoC.
NS3 is a octo-core 64-bit ARMv8 Cortex-A72 processors
targeting a broad range of networking applications.
Signed-off-by: Rayagonda Kokatanur
---
arch/arm/Kconfig | 10 ++
arch/arm/dts/Makefile | 2 ++
arch/arm/dts/ns3
Rayagonda Kokatanur (27):
board: ns3: add support for Broadcom Northstar 3
arm: cpu: armv8: add L3 memory flush support
configs: ns3: enable clock subsystem
arm: dts: ns3: add clock dt node
configs: ns3: enable pinctrl driver
dt-bindings: pinctrl: add ns3 pads definition
arm: dts: ns3
On Fri, Apr 24, 2020 at 8:53 PM Tom Rini wrote:
> On Mon, Apr 20, 2020 at 10:43:28PM +0530, Rayagonda Kokatanur wrote:
> > Hi all,
> >
> > I am planning to push patches for new platform which includes board
> files,
> > configuration files, defconfigs, dt files
On Tue, Apr 21, 2020 at 11:23 AM Heiko Schocher wrote:
>
> Hello Rayagonda Kokatanur,
>
> Am 08.04.2020 um 07:42 schrieb Rayagonda Kokatanur:
> > Add I2C driver support for Broadcom iproc-based socs.
> >
> > Signed-off-by: Arjun Jyothi
> > Signed-off-by:
Hi all,
I am planning to push patches for new platform which includes board files,
configuration files, defconfigs, dt files etc everything specific to new
platform.
I managed to break the new platform code into small logical patches, I
ended up creating total 77 patches.
Now is it good idea
using git send-email, via my gmail account, to send the
> patch. I guess I could try copying the patch manually into a mail client?
>
> Reuben
>
> On Mon, 20 Apr 2020 at 14:55, Rayagonda Kokatanur
> wrote:
>>
>> you should subscribe to mailing list - https://li
you should subscribe to mailing list -
https://lists.denx.de/listinfo/u-boot
On Mon, Apr 20, 2020 at 5:30 AM Reuben Dowle wrote:
> Hi,
>
> I have attempted to submit patch to this mailing list twice, and each time
> the patch appears to get lost in moderation.
>
> Is there something extra I
On Thu, Apr 9, 2020 at 7:11 PM Tom Rini wrote:
>
> On Thu, Apr 02, 2020 at 04:08:12PM +0530, Rayagonda Kokatanur wrote:
>
> > From: Srinath Mannam
> >
> > Add support for stingray PAXB PHY controller driver.
> > This driver supports maximum 8 PAXB phys using
On Wed, Apr 8, 2020 at 7:16 PM Marek Vasut wrote:
>
> On 4/8/20 7:48 AM, Rayagonda Kokatanur wrote:
> > On Wed, Apr 8, 2020 at 9:56 AM Marek Vasut wrote:
> >>
> >> On 4/8/20 5:35 AM, Rayagonda Kokatanur wrote:
> >> [...]
> >>> +struct br
Base driver for Broadcom xHCI controllers
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Vladimir Olovyannikov
---
Changes from v3:
-Address review comments from Marek Vasut,
Declare hc_base as void __iomem * instead of uintptr_t.
Changes from v2
On Wed, Apr 8, 2020 at 11:18 AM Rayagonda Kokatanur
wrote:
>
> On Wed, Apr 8, 2020 at 9:56 AM Marek Vasut wrote:
> >
> > On 4/8/20 5:35 AM, Rayagonda Kokatanur wrote:
> > [...]
> > > +struct brcm_xhci_platdata {
> > > + unsigned int
On Wed, Apr 8, 2020 at 9:56 AM Marek Vasut wrote:
>
> On 4/8/20 5:35 AM, Rayagonda Kokatanur wrote:
> [...]
> > +struct brcm_xhci_platdata {
> > + unsigned int arcache;
> > + unsigned int awcache;
> > + uintptr_t hc_base;
>
> This could be struct
Add I2C driver support for Broadcom iproc-based socs.
Signed-off-by: Arjun Jyothi
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Sheetal Tigadoli
Signed-off-by: Vladimir Olovyannikov
Reviewed-by: Heiko Schocher
---
Changes from v2:
-Address all review comments from Heiko Schocher,
Use
On Wed, Apr 8, 2020 at 9:30 AM Heiko Schocher wrote:
>
> Hello Rayagonda Kokatanur,
>
> Am 26.03.2020 um 11:51 schrieb Rayagonda Kokatanur:
> > Add I2C driver support for Broadcom iproc-based socs.
> >
> > Signed-off-by: Arjun Jyothi
> > Signed-off-by:
On Tue, Apr 7, 2020 at 2:39 PM Marek Vasut wrote:
>
> On 4/7/20 8:29 AM, Rayagonda Kokatanur wrote:
> [...]
> > +static int xhci_brcm_probe(struct udevice *dev)
> > +{
> > + struct xhci_hccr *hcd;
> > + struct xhci_hcor *hcor;
> > + struct brcm
Base driver for Broadcom xHCI controllers
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Vladimir Olovyannikov
---
Changes from v2:
-Address review comments from Marek Vasut,
Cache hc_base in private data instead of always reading it from DT
Base driver for Broadcom xHCI controllers
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Vladimir Olovyannikov
---
Changes from v1:
-Address review comments from Marek Vasut,
Use comman macro name for read and write register,
Rename the macro
Get the watchdog platform clock from the DTS file
using clk subsystem and use the same for calculating
ticks in msec.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Kumar Reddy Gooty
---
Changes from v3:
-Address review comments from Stefan Roese,
Don't return error
On Mon, Apr 6, 2020 at 1:17 PM Stefan Roese wrote:
>
> On 06.04.20 09:15, Rayagonda Kokatanur wrote:
> > Get the watchdog platform clock from the DTS file
> > using clk subsystem and use the same for calculating
> > ticks in msec.
> >
> > Signed-off-by:
Get the watchdog platform clock from the DTS file
using clk subsystem and use the same for calculating
ticks in msec.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Kumar Reddy Gooty
---
Changes from v2:
-Address review comments from Stefan Roese,
Use clk subsystem to get the base
From: Srinath Mannam
Add support for stingray PAXB PHY controller driver.
This driver supports maximum 8 PAXB phys using pipemux data.
Signed-off-by: Srinath Mannam
Signed-off-by: Rayagonda Kokatanur
Reviewed-by: Stefan Roese
---
Changes from v2:
-Address review comments from Stefan Roese
On Thu, Apr 2, 2020 at 3:29 PM Stefan Roese wrote:
>
> On 02.04.20 10:45, Rayagonda Kokatanur wrote:
> > From: Srinath Mannam
> >
> > Add support for stingray PAXB PHY controller driver.
> > This driver supports maximum 8 PAXB phys using pipemux data.
> &g
From: Srinath Mannam
Add support for stingray PAXB PHY controller driver.
This driver supports maximum 8 PAXB phys using pipemux data.
Signed-off-by: Srinath Mannam
Signed-off-by: Rayagonda Kokatanur
---
Changes from v1:
-Address review comments from Stefan Roese,
Use GENMASK() instead
On Thu, Apr 2, 2020 at 1:20 PM Stefan Roese wrote:
>
> On 02.04.20 09:17, Rayagonda Kokatanur wrote:
> > On Thu, Apr 2, 2020 at 12:05 PM Stefan Roese wrote:
> >>
> >> On 02.04.20 06:36, Rayagonda Kokatanur wrote:
> >>> From: Srinath Mannam
>
On Thu, Apr 2, 2020 at 12:05 PM Stefan Roese wrote:
>
> On 02.04.20 06:36, Rayagonda Kokatanur wrote:
> > From: Srinath Mannam
> >
> > Add support for stingray PAXB PHY controller driver.
> > This driver supports maximum 8 PAXB phys using pipemux data.
> &g
On Thu, Apr 2, 2020 at 11:58 AM Stefan Roese wrote:
>
> On 01.04.20 14:31, Rayagonda Kokatanur wrote:
> > From: Bharat Kumar Reddy Gooty
> >
> > Get the watchdog platform clock from the DTS file
> > and use the same for calculating ticks in msec.
> >
> &g
On Thu, Apr 2, 2020 at 11:32 AM Jaehoon Chung wrote:
>
> Hi Rayagonda,
>
> On 3/31/20 2:34 PM, Rayagonda Kokatanur wrote:
> > This patch series adds following,
> > -Fix possible memory leak in probe()
> > -Enable R1B response quirk
> > -Fix compilation w
From: Srinath Mannam
Add support for stingray PAXB PHY controller driver.
This driver supports maximum 8 PAXB phys using pipemux data.
Signed-off-by: Srinath Mannam
Signed-off-by: Rayagonda Kokatanur
---
drivers/phy/Kconfig | 7 ++
drivers/phy/Makefile | 1 +
drivers
From: Bharat Kumar Reddy Gooty
Get the watchdog platform clock from the DTS file
and use the same for calculating ticks in msec.
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
---
Changes from v1:
-Address review comments from Stefan Roese,
Remove default
On Tue, Mar 31, 2020 at 12:44 PM Stefan Roese wrote:
>
> On 31.03.20 08:08, Rayagonda Kokatanur wrote:
> > From: Bharat Kumar Reddy Gooty
> >
> > Get the watchdog default timeout value and clock from the DTS file
>
> The default timeout is already read from the DT.
On Tue, Mar 31, 2020 at 11:11 AM Jaehoon Chung wrote:
>
> On 3/31/20 2:34 PM, Rayagonda Kokatanur wrote:
> > From: Bharat Kumar Reddy Gooty
> >
> > Enable SDHCI_QUIRK_BROKEN_R1B quirk.
>
> Is there any problem or special reason to add this quirks?
switch
From: Bharat Kumar Reddy Gooty
Get the watchdog default timeout value and clock from the DTS file
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
---
drivers/watchdog/sp805_wdt.c | 36 ++--
1 file changed, 34 insertions(+), 2
move host.mmc before sdhci_setup_cfg
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Kumar Reddy Gooty
---
drivers/mmc/iproc_sdhci.c | 10 +-
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/iproc_sdhci.c b/drivers/mmc/iproc_sdhci.c
index 0f4d608869
Rayagonda Kokatanur (2):
drivers: mmc: iproc_sdhci: fix compilation warning
drivers: mmc: iproc_sdhci: move host.mmc init before sdhci_setup_cfg
drivers/mmc/iproc_sdhci.c | 22 +-
1 file changed, 13 insertions(+), 9 deletions(-)
--
2.17.1
From: Bharat Kumar Reddy Gooty
Enable SDHCI_QUIRK_BROKEN_R1B quirk.
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
---
drivers/mmc/iproc_sdhci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/iproc_sdhci.c b/drivers/mmc
set_ios_post return type changed from void to int, correcting
the same to fix compilation warning.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Kumar Reddy Gooty
---
drivers/mmc/iproc_sdhci.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc
From: Bharat Kumar Reddy Gooty
Free the pointer variable 'iproc_sdhci' upon failure to fix
possible memory leak.
Signed-off-by: Bharat Kumar Reddy Gooty
Signed-off-by: Rayagonda Kokatanur
---
drivers/mmc/iproc_sdhci.c | 8 +---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git
On Mon, Nov 25, 2019 at 2:05 PM Heiko Schocher wrote:
>
> Hello Vladimir,
>
> Am 22.11.2019 um 22:20 schrieb Vladimir Olovyannikov:
> > From: Arjun Jyothi
> >
> > Add I2C driver support for Broadcom iproc-based socs.
> >
> > Signed-off-by: Arjun Jyot
Add I2C driver support for Broadcom iproc-based socs.
Signed-off-by: Arjun Jyothi
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Sheetal Tigadoli
Signed-off-by: Vladimir Olovyannikov
---
Changes from v1:
-Address all review comments from Heiko Schocher
drivers/i2c/Kconfig | 8
On Mon, Nov 25, 2019 at 2:05 PM Heiko Schocher wrote:
>
> Hello Vladimir,
>
> Am 22.11.2019 um 22:20 schrieb Vladimir Olovyannikov:
> > From: Arjun Jyothi
> >
> > Add I2C driver support for Broadcom iproc-based socs.
> >
> > Signed-off-by: Arjun Jyot
301 - 376 of 376 matches
Mail list logo
