guys, I am trying to set up a BDI2000 probe to control an MPC8572 based board (MPC8572DS from freescale to be exact). ftp://78.31.64.234/bdigdb/config/powerpc/mpc85xx/ has a config version for this CPU, but it does pretty much nothing.
For some reason the instructions put into the CFG file do not make it to the processor. For instance, there is an instruction in the [INIT] section of the file: #0 WSPR 624 0x100f0000 after the target resets the value is not set even though the config file has been successfully downloaded: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv CONFIG: loading configuration file passed - CONFIG: loading register definition passed - TARGET: processing user reset request - BDI asserts HRESET - Reset JTAG controller passed - JTAG exists check passed - IDCODE is 0x000E801D - SVR is 0x80E80011 - PVR is 0x80210030 - CCSRBAR is 0x0_ff700000 - BDI scans core HALT command - BDI scans core HALT command - BDI removes HRESET - TARGET: resetting target passed - TARGET: processing target startup .... - TARGET: processing target startup passed eval8572>info Target CPU : MPC8572 Core#0 Core state : halted Debug entry cause : COP halt Current PC : 0xfffffffc Current CR : 0x00000000 Current MSR : 0x00000200 Current LR : 0x00000000 Current CCSRBAR : 0x0_ff700000 eval8572>rdspr 624 SPR 624 : 0x00000001 1 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ but it can be set now from the BDI telnet console: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv eval8572>RMSPR 624 0x100f0000 eval8572>rdspr 624 SPR 624 : 0x100f0000 269418496 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Am I missing something obvious? Can someone please share a BDI config file for 8572? TIA, -- Vadim _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
