There is an Errata with the built-in I2C controller where various I2C
hardware errors cause a complete lockup of the CPU (which eventually
results in an watchdog reset).
Put the I2C MPP pins into GPIO mode and use the i2c-gpio driver instead.
This uses a bit-banged implementation of an I2C control
Hi Me,
On Thu, Jul 20, 2023 at 3:03 PM Chris Packham wrote:
>
> There is an Errata with the built-in I2C controller where various I2C
> hardware errors cause a complete lockup of the CPU (which eventually
> results in an watchdog reset).
>
> Put the I2C MPP pins into GPIO mode and use the i2c-gpi
Hi Chris,
On 7/20/23 23:01, Chris Packham wrote:
Hi Me,
On Thu, Jul 20, 2023 at 3:03 PM Chris Packham wrote:
There is an Errata with the built-in I2C controller where various I2C
hardware errors cause a complete lockup of the CPU (which eventually
results in an watchdog reset).
Put the I2C
3 matches
Mail list logo