From: Peng Fan <peng....@nxp.com>
Enable CONFIG_SPL_DM_SERIAL. uart and its pinmux was already
marked with u-boot,dm-spl.
Move preloader_console_init after spl_early_init to make sure driver
model work.
Signed-off-by: Peng Fan <peng....@nxp.com>
---
board/data_modul/imx8mm_edm_sbc/spl.c | 12 ++----------
configs/imx8mm_data_modul_edm_sbc_defconfig | 1 -
include/configs/imx8mm_data_modul_edm_sbc.h | 2 --
3 files changed, 2 insertions(+), 13 deletions(-)
diff --git a/board/data_modul/imx8mm_edm_sbc/spl.c
b/board/data_modul/imx8mm_edm_sbc/spl.c
index 36cad14fc41..f5063eb8c19 100644
--- a/board/data_modul/imx8mm_edm_sbc/spl.c
+++ b/board/data_modul/imx8mm_edm_sbc/spl.c
@@ -28,14 +28,8 @@
DECLARE_GLOBAL_DATA_PTR;
-#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1)
#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-static const iomux_v3_cfg_t uart_pads[] = {
- IMX8MM_PAD_UART3_RXD_UART3_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
- IMX8MM_PAD_UART3_TXD_UART3_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
static const iomux_v3_cfg_t wdog_pads[] = {
IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
};
@@ -47,8 +41,6 @@ static void data_modul_imx8mm_edm_sbc_early_init_f(void)
imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
set_wdog_reset(wdog);
-
- imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
}
static int data_modul_imx8mm_edm_sbc_board_power_init(void)
@@ -149,8 +141,6 @@ void board_init_f(ulong dummy)
data_modul_imx8mm_edm_sbc_early_init_f();
- preloader_console_init();
-
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
@@ -160,6 +150,8 @@ void board_init_f(ulong dummy)
hang();
}
+ preloader_console_init();
+
ret = uclass_get_device_by_name(UCLASS_CLK,
"clock-controller@30380000",
&dev);
diff --git a/configs/imx8mm_data_modul_edm_sbc_defconfig
b/configs/imx8mm_data_modul_edm_sbc_defconfig
index afc8c43ca99..dd3c2e19e52 100644
--- a/configs/imx8mm_data_modul_edm_sbc_defconfig
+++ b/configs/imx8mm_data_modul_edm_sbc_defconfig
@@ -200,7 +200,6 @@ CONFIG_DM_RTC=y
CONFIG_RTC_M41T62=y
CONFIG_CONS_INDEX=2
CONFIG_DM_SERIAL=y
-# CONFIG_SPL_DM_SERIAL is not set
CONFIG_MXC_UART=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
diff --git a/include/configs/imx8mm_data_modul_edm_sbc.h
b/include/configs/imx8mm_data_modul_edm_sbc.h
index 33778a2365e..ff98095d27d 100644
--- a/include/configs/imx8mm_data_modul_edm_sbc.h
+++ b/include/configs/imx8mm_data_modul_edm_sbc.h
@@ -41,8 +41,6 @@
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0x40000000 /* Minimum 1 GiB DDR
*/
-#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR
-
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 2048
#define CONFIG_SYS_MAXARGS 64
--
2.36.0
