[2nd RESEND PATCH v2 6/6] mtd: spi-nor: Set ECC unit size to MTD writesize in Infineon SEMPER flashes

From: Takahiro Kuwano The Infineon SEMPER NOR flash family uses 2-bit ECC by default with each ECC block being 16 bytes. Under this scheme multi-pass programming to an ECC block is not allowed. Set the writesize to make sure multi-pass programming is not attempted on the flash. Acked-by: Tudor A

[RESEND PATCH v2 6/6] mtd: spi-nor: Set ECC unit size to MTD writesize in Infineon SEMPER flashes

From: Takahiro Kuwano The Infineon SEMPER NOR flash family uses 2-bit ECC by default with each ECC block being 16 bytes. Under this scheme multi-pass programming to an ECC block is not allowed. Set the writesize to make sure multi-pass programming is not attempted on the flash. Acked-by: Tudor A

Re: [PATCH v2 6/6] mtd: spi-nor: Set ECC unit size to MTD writesize in Infineon SEMPER flashes

On 4/25/24 05:52, tkuw584...@gmail.com wrote: > From: Takahiro Kuwano > > The Infineon SEMPER NOR flash family uses 2-bit ECC by default with each > ECC block being 16 bytes. Under this scheme multi-pass programming to an > ECC block is not allowed. Set the writesize to make sure multi-pass >

[PATCH v2 6/6] mtd: spi-nor: Set ECC unit size to MTD writesize in Infineon SEMPER flashes

From: Takahiro Kuwano The Infineon SEMPER NOR flash family uses 2-bit ECC by default with each ECC block being 16 bytes. Under this scheme multi-pass programming to an ECC block is not allowed. Set the writesize to make sure multi-pass programming is not attempted on the flash. Signed-off-by: Ta