This series collects several board-enablement fixes for the Gumstix
Overo as well as switching to BCH8 for NAND ECC, updating the UBI
boot sequence for DTB-based boots, and correcting a RAM configuration
for Overo COMs of Revision 0.

This series follows after the series previously submitted:
http://lists.denx.de/pipermail/u-boot/2015-April/211651.html

Arun Bharadwaj (2):
  omap3: overo: Add DTS support for TobiDuo expansion
  overo: Override RAM setup for rev. 0 boards

Ash Charles (4):
  omap3: overo: Set the Arbor43C 'expansionname'
  overo: Add support for Palo35 expansion board
  omap3: overo: Use software BCH8 ECC for NAND
  omap3: overo: Allow boot with kernel in UBI rootfs

 board/overo/overo.c           |  3 +++
 board/overo/spl.c             |  2 +-
 include/configs/omap3_overo.h | 32 ++++++++++++++++++++++++++++----
 3 files changed, 32 insertions(+), 5 deletions(-)

-- 
2.1.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to