Mario Six wrote:
The problem is that in 36-bit mode the physical addresses are 64-bit, which
means that you get 64-bit integers when you read something from the
device tree
with fdtdec_get_addr. But the device tree addresses themselves seem to be
32-bit, because if I read a property like 'reg =
On Sun, May 8, 2016 at 3:28 PM, Timur Tabi wrote:
> On Mon, May 2, 2016 at 6:43 AM, Mario Six wrote:
> > Regarding the address width discrepancy: The system I'm working on is a
> > P1022 Qoriq, which has 36 bit width, which implies that phys_addr_t needs
> > to be 64 bit. But the everything else
On Mon, May 2, 2016 at 6:43 AM, Mario Six wrote:
> Regarding the address width discrepancy: The system I'm working on is a
> P1022 Qoriq, which has 36 bit width, which implies that phys_addr_t needs
> to be 64 bit. But the everything else (including the GPIO controller) uses
> 32 bits, thus the de
Hi Simon,
On Sun, May 1, 2016 at 7:46 PM, Simon Glass wrote:
> Hi Mario,
>
> On 26 April 2016 at 08:08, Mario Six wrote:
> >
> > Signed-off-by: Mario Six
> > ---
> > arch/powerpc/include/asm/arch-mpc85xx/gpio.h | 2 +
> > arch/powerpc/include/asm/immap_85xx.h| 2 +
> > drivers/gpi
Hi Mario,
On 26 April 2016 at 08:08, Mario Six wrote:
>
> Signed-off-by: Mario Six
> ---
> arch/powerpc/include/asm/arch-mpc85xx/gpio.h | 2 +
> arch/powerpc/include/asm/immap_85xx.h| 2 +
> drivers/gpio/Kconfig | 6 +
> drivers/gpio/Makefile
Signed-off-by: Mario Six
---
arch/powerpc/include/asm/arch-mpc85xx/gpio.h | 2 +
arch/powerpc/include/asm/immap_85xx.h| 2 +
drivers/gpio/Kconfig | 6 +
drivers/gpio/Makefile| 1 +
drivers/gpio/mpc85xx_gpio.c | 182 +
6 matches
Mail list logo