Add generic kconfig options to read MAC address(es) from an EEPROM
connected to an I2C bus
The SYS_I2C_EEPROM_* options can't be used because they depend
on I2C_EEPROM, which requires a DM driver, and not all boards
have DM I2C drivers yet
Signed-off-by: Luis Araneda <luaran...@gmail.com>
---
drivers/misc/Kconfig | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 17b3a805a2..ff694871bf 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -272,6 +272,32 @@ config SYS_I2C_EEPROM_ADDR_OVERFLOW
endif
+config MAC_ADDR_IN_I2C_EEPROM
+ bool "MAC address in I2C EEPROM"
+ help
+ Read MAC address(es) from an EEPROM
+ connected to an I2C bus
+
+if MAC_ADDR_IN_I2C_EEPROM
+
+config MAC_ADDR_I2C_EEPROM_BUS
+ int "I2C bus connected to the EEPROM device"
+ default 0
+
+config MAC_ADDR_I2C_EEPROM_CHIP_ADDR
+ hex "Chip address of the EEPROM device"
+ default 0
+
+config MAC_ADDR_I2C_EEPROM_DATA_ADDR_LEN
+ int "Length in bytes of EEPROM data addresses"
+ default 1
+
+config MAC_ADDR_I2C_EEPROM_DATA_ADDR_START
+ hex "Start address of MAC data in EEPROM"
+ default 0
+
+endif
+
config GDSYS_RXAUI_CTRL
bool "Enable gdsys RXAUI control driver"
depends on MISC
--
2.18.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
