Hi Jerome / Neil,
[...]
>
> I'm not quite sure I get what I should understand from this log.
>
> I can comment on the original patch though.
>
> I think you should keep the phase settings aligned with Linux.
>
Thanks for this inputs.
> A) Among the exchange I had with amlogic, I got that there sh
On Fri 20 Dec 2019 at 19:47, Anand Moon wrote:
> Hi Neil, + Jerome,
>
> On Sat, 21 Dec 2019 at 00:28, Anand Moon wrote:
>>
>> Hi Neil,
>>
>> > Could you try the following patches instead of this one ?
>> >
>> > https://patchwork.ozlabs.org/patch/1213648/
>> > https://patchwork.ozlabs.org/patch
Hi Neil, + Jerome,
On Sat, 21 Dec 2019 at 00:28, Anand Moon wrote:
>
> Hi Neil,
>
> > Could you try the following patches instead of this one ?
> >
> > https://patchwork.ozlabs.org/patch/1213648/
> > https://patchwork.ozlabs.org/patch/1213650/
> >
>
> Yes I have tried this series it worked for me
Hi Neil,
> Could you try the following patches instead of this one ?
>
> https://patchwork.ozlabs.org/patch/1213648/
> https://patchwork.ozlabs.org/patch/1213650/
>
Yes I have tried this series it worked for me. It's much better fix
than my approach.
-Anand
Hi Anand,
On 04/12/2019 10:26, Neil Armstrong wrote:
> Hi,
>
> On 27/11/2019 15:42, Anand Moon wrote:
>> Hi Neil,
>>
>> On Wed, 27 Nov 2019 at 18:30, Neil Armstrong wrote:
>>>
>>> Hi,
>>>
>>> On 26/11/2019 22:12, Anand Moon wrote:
odroid n2 eMMC module would failed to boot up,
because
Hi,
On 27/11/2019 15:42, Anand Moon wrote:
> Hi Neil,
>
> On Wed, 27 Nov 2019 at 18:30, Neil Armstrong wrote:
>>
>> Hi,
>>
>> On 26/11/2019 22:12, Anand Moon wrote:
>>> odroid n2 eMMC module would failed to boot up,
>>> because of TX phase clk failure, fix the typo in
>>> TX phase macro to help
Hi Neil,
On Wed, 27 Nov 2019 at 18:30, Neil Armstrong wrote:
>
> Hi,
>
> On 26/11/2019 22:12, Anand Moon wrote:
> > odroid n2 eMMC module would failed to boot up,
> > because of TX phase clk failure, fix the typo in
> > TX phase macro to help tune correct clk freqency.
> >
> > Before these change
Hi,
On 26/11/2019 22:12, Anand Moon wrote:
> odroid n2 eMMC module would failed to boot up,
> because of TX phase clk failure, fix the typo in
> TX phase macro to help tune correct clk freqency.
>
> Before these changes.
> clock is enabled (380953Hz)
> clock is enabled (2500Hz)
> after th
odroid n2 eMMC module would failed to boot up,
because of TX phase clk failure, fix the typo in
TX phase macro to help tune correct clk freqency.
Before these changes.
clock is enabled (380953Hz)
clock is enabled (2500Hz)
after these changes
clock is enabled (380953Hz)
clock is enabled
9 matches
Mail list logo