phycore_init() is use for phycore board only, it should be move back
to phycore-rk3288.c
Signed-off-by: Kever Yang
---
arch/arm/mach-rockchip/rk3288-board-spl.c| 39
arch/arm/mach-rockchip/rk3288/Kconfig| 1 +
board/phytec/phycore_rk3288/phycore-rk3288.c | 47 +
Hi Kever,
this is fine for me. You can drop the phycore_init() code completely. No
need to carry this around in our board code.
The SOM was redesigned and is equipped with an STM8 connected to the
RK818. The required setup we did before in the SPL is now done by the ST
controller. I know there are
2 matches
Mail list logo