Change the implementation for pxa to relocate the code to
an arbitrary address in RAM.

Signed-off-by: Heiko Schocher <h...@denx.de>
---
 arch/arm/cpu/pxa/start.S    |  168 +++++++++++++++++++++++++++++++++++++++++++
 arch/arm/cpu/pxa/u-boot.lds |   14 ++++-
 2 files changed, 181 insertions(+), 1 deletions(-)

diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index 8010b0e..064ddbc 100644
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -82,12 +82,15 @@ _fiq:                       .word fiq
  * - jump to second stage
  */

+.globl _TEXT_BASE
 _TEXT_BASE:
        .word   TEXT_BASE

+#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 .globl _armboot_start
 _armboot_start:
        .word _start
+#endif

 /*
  * These are defined in the board-specific linker script.
@@ -112,6 +115,162 @@ FIQ_STACK_START:
        .word 0x0badc0de
 #endif /* CONFIG_USE_IRQ */

+#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
+/* IRQ stack memory (calculated at run-time) + 8 bytes */
+.globl IRQ_STACK_START_IN
+IRQ_STACK_START_IN:
+       .word   0x0badc0de
+
+.globl _datarel_start
+_datarel_start:
+       .word __datarel_start
+
+.globl _datarelrolocal_start
+_datarelrolocal_start:
+       .word __datarelrolocal_start
+
+.globl _datarellocal_start
+_datarellocal_start:
+       .word __datarellocal_start
+
+.globl _datarelro_start
+_datarelro_start:
+       .word __datarelro_start
+
+.globl _got_start
+_got_start:
+       .word __got_start
+
+.globl _got_end
+_got_end:
+       .word __got_end
+
+/*
+ * the actual reset code
+ */
+
+reset:
+       /*
+        * set the cpu to SVC32 mode
+        */
+       mrs     r0,cpsr
+       bic     r0,r0,#0x1f
+       orr     r0,r0,#0xd3
+       msr     cpsr,r0
+
+       /*
+        * we do sys-critical inits only at reboot,
+        * not when booting from ram!
+        */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+       bl      cpu_init_crit
+#endif
+
+/* Set stackpointer in internal RAM to call board_init_f */
+call_board_init_f:
+       ldr     sp, =(CONFIG_SYS_INIT_SP_ADDR)
+       ldr     r0,=0x00000000
+       bl      board_init_f
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ */
+       .globl  relocate_code
+relocate_code:
+       mov     r4, r0  /* save addr_sp */
+       mov     r5, r1  /* save addr of gd */
+       mov     r6, r2  /* save addr of destination */
+       mov     r7, r2  /* save addr of destination */
+
+       /* Set up the stack                                                 */
+stack_setup:
+       mov     sp, r4
+
+       adr     r0, _start
+       ldr     r2, _TEXT_BASE
+       ldr     r3, _bss_start
+       sub     r2, r3, r2              /* r2 <- size of armboot            */
+       add     r2, r0, r2              /* r2 <- source end address         */
+       cmp     r0, r6
+       beq     clear_bss
+
+#ifndef CONFIG_SKIP_RELOCATE_UBOOT
+copy_loop:
+       ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
+       stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
+       cmp     r0, r2                  /* until source end addreee [r2]    */
+       ble     copy_loop
+
+#ifndef CONFIG_PRELOADER
+       /* fix got entries */
+       ldr     r1, _TEXT_BASE          /* Text base */
+       mov     r0, r7                  /* reloc addr */
+       ldr     r2, _got_start          /* addr in Flash */
+       ldr     r3, _got_end            /* addr in Flash */
+       sub     r3, r3, r1
+       add     r3, r3, r0
+       sub     r2, r2, r1
+       add     r2, r2, r0
+
+fixloop:
+       ldr     r4, [r2]
+       sub     r4, r4, r1
+       add     r4, r4, r0
+       str     r4, [r2]
+       add     r2, r2, #4
+       cmp     r2, r3
+       bne     fixloop
+#endif
+#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
+
+clear_bss:
+#ifndef CONFIG_PRELOADER
+       ldr     r0, _bss_start
+       ldr     r1, _bss_end
+       ldr     r3, _TEXT_BASE          /* Text base */
+       mov     r4, r7                  /* reloc addr */
+       sub     r0, r0, r3
+       add     r0, r0, r4
+       sub     r1, r1, r3
+       add     r1, r1, r4
+       mov     r2, #0x00000000         /* clear                            */
+
+clbss_l:str    r2, [r0]                /* clear loop...                    */
+       add     r0, r0, #4
+       cmp     r0, r1
+       bne     clbss_l
+#endif
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+#ifdef CONFIG_ONENAND_IPL
+       ldr     pc, _start_oneboot
+
+_start_oneboot: .word start_oneboot
+#else
+       ldr     r0, _TEXT_BASE
+       ldr     r2, _board_init_r
+       sub     r2, r2, r0
+       add     r2, r2, r7      /* position from board_init_r in RAM */
+       /* setup parameters for board_init_r */
+       mov     r0, r5          /* gd_t */
+       mov     r1, r7          /* dest_addr */
+       /* jump to it ... */
+       mov     lr, r2
+       mov     pc, lr
+
+_board_init_r: .word board_init_r
+#endif
+
+#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */

 /****************************************************************************/
 /*                                                                         */
@@ -188,6 +347,7 @@ _start_armboot: .word start_oneboot
 #else
 _start_armboot: .word start_armboot
 #endif
+#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */

 /****************************************************************************/
 /*                                                                         */
@@ -367,9 +527,13 @@ setspeed_done:
        stmia   sp, {r0 - r12}                  /* Calling r0-r12           */
        add     r8, sp, #S_PC

+#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
        ldr     r2, _armboot_start
        sub     r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
        sub     r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)   @ set base 2 words into 
abort stack
+#else
+       ldr     r2, IRQ_STACK_START_IN
+#endif
        ldmia   r2, {r2 - r4}                   /* get pc, cpsr, old_r0     */
        add     r0, sp, #S_FRAME_SIZE           /* restore sp_SVC           */

@@ -404,9 +568,13 @@ setspeed_done:
        .endm

        .macro get_bad_stack
+#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
        ldr     r13, _armboot_start             @ setup our mode stack
        sub     r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
        sub     r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple 
spots in abort stack
+#else
+       ldr     r13, IRQ_STACK_START_IN         @ setup our mode stack
+#endif

        str     lr, [r13]                       @ save caller lr / spsr
        mrs     lr, spsr
diff --git a/arch/arm/cpu/pxa/u-boot.lds b/arch/arm/cpu/pxa/u-boot.lds
index d4e85ef..74a4c6e 100644
--- a/arch/arm/cpu/pxa/u-boot.lds
+++ b/arch/arm/cpu/pxa/u-boot.lds
@@ -39,11 +39,23 @@ SECTIONS
        .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }

        . = ALIGN(4);
-       .data : { *(.data) }
+       .data : {
+               *(.data)
+       __datarel_start = .;
+               *(.data.rel)
+       __datarelrolocal_start = .;
+               *(.data.rel.ro.local)
+       __datarellocal_start = .;
+               *(.data.rel.local)
+       __datarelro_start = .;
+               *(.data.rel.ro)
+       }

+       __got_start = .;
        . = ALIGN(4);
        .got : { *(.got) }

+       __got_end = .;
        . = .;
        __u_boot_cmd_start = .;
        .u_boot_cmd : { *(.u_boot_cmd) }
-- 
1.6.2.5

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to