Re: [U-Boot] [PATCH 2/3] Add support W90P710 EMC interface

2009-02-09 Thread Ben Warren
Hi Konstantin, Vovk Konstantin wrote: > This will add Ethernet interfacse to uBoot > W90P710 ARM SoC port. If you want reset > and initialize PHY KSZ8001 after MAC init, > simply add CONFIG_RESET_PHY_R define in your > board configuration file. In most cases this is > not necessarily. > --- > dr

Re: [U-Boot] [PATCH 2/3] Add support W90P710 EMC interface

2009-02-09 Thread Wolfgang Denk
Dear Vovk Konstantin, In message <49900f21.3020...@svitonline.com> you wrote: > This will add Ethernet interfacse to uBoot > W90P710 ARM SoC port. If you want reset > and initialize PHY KSZ8001 after MAC init, > simply add CONFIG_RESET_PHY_R define in your > board configuration file. In most cases

Re: [U-Boot] [PATCH 2/3] Add support W90P710 EMC interface

2009-02-09 Thread Jean-Christophe PLAGNIOL-VILLARD
On 13:10 Mon 09 Feb , Vovk Konstantin wrote: > This will add Ethernet interfacse to uBoot > W90P710 ARM SoC port. If you want reset > and initialize PHY KSZ8001 after MAC init, > simply add CONFIG_RESET_PHY_R define in your > board configuration file. In most cases this is > not necessarily. >

[U-Boot] [PATCH 2/3] Add support W90P710 EMC interface

2009-02-09 Thread Vovk Konstantin
This will add Ethernet interfacse to uBoot W90P710 ARM SoC port. If you want reset and initialize PHY KSZ8001 after MAC init, simply add CONFIG_RESET_PHY_R define in your board configuration file. In most cases this is not necessarily. --- drivers/net/Makefile |5 +- drivers/net/w90p710