Re: [U-Boot] [PATCH 2/3] Add support for Maxim's DS4510 I2C device

Dear Peter Tyser, In message <[EMAIL PROTECTED]> you wrote: > > > > create mode 100644 drivers/gpio/ds4510.c > > > create mode 100644 include/gpio/ds4510.h > > > > This should go to devices/i2c/ > > I'm assuming you're referring to drivers/i2c. I was under the Right. > impression the drive

Re: [U-Boot] [PATCH 2/3] Add support for Maxim's DS4510 I2C device

On Tue, 2008-11-18 at 22:37 +0100, Wolfgang Denk wrote: > Dear Peter Tyser, > > In message <[EMAIL PROTECTED]> you wrote: > > Initial support for the DS4510, a CPU supervisor with > > integrated EEPROM, SRAM, and 4 programmable non-volatile > > GPIO pins. The CONFIG_DS4510 define enables support

Re: [U-Boot] [PATCH 2/3] Add support for Maxim's DS4510 I2C device

Dear Peter Tyser, In message <[EMAIL PROTECTED]> you wrote: > Initial support for the DS4510, a CPU supervisor with > integrated EEPROM, SRAM, and 4 programmable non-volatile > GPIO pins. The CONFIG_DS4510 define enables support > for the device while the CONFIG_CMD_DS4510 define > enables the ds4

[U-Boot] [PATCH 2/3] Add support for Maxim's DS4510 I2C device

Initial support for the DS4510, a CPU supervisor with integrated EEPROM, SRAM, and 4 programmable non-volatile GPIO pins. The CONFIG_DS4510 define enables support for the device while the CONFIG_CMD_DS4510 define enables the ds4510 command. Signed-off-by: Peter Tyser <[EMAIL PROTECTED]> --- READM