Hi, Dall:
I have a few questions about switching cpu's state from secure to
non-sec in uboot.
1. I found do_nonsec_virt_switch() function had been integrated in
uboot_2014_01_RC2.
This function would switch cpu from secure state to non-sec, even
into hyp-state.
So, my question is:
If a
On 29 December 2013 19:10, tiger...@viatech.com.cn wrote:
Hi, Dall:
I have a few questions about switching cpu's state from secure to
non-sec in uboot.
1. I found do_nonsec_virt_switch() function had been integrated in
uboot_2014_01_RC2.
This function would switch cpu from secure state
Hi, Dall:
Thanks for your quick response!
It depends on the board. Which ARM doc are you referring to?
ARM Security Technology : Building a Secure System using TrustZone
Technology.
(PRD29-GENC-009492C)
Figure 5-2 in Chapter 5.2.1 Boot Sequence.
Based on my understanding, U-boot is classfied as
On 29 December 2013 21:15, tiger...@viatech.com.cn wrote:
Hi, Dall:
Thanks for your quick response!
It depends on the board. Which ARM doc are you referring to?
ARM Security Technology : Building a Secure System using TrustZone
Technology.
(PRD29-GENC-009492C)
Figure 5-2 in Chapter 5.2.1
Hi, Dall:
Thanks a lot!
non-secure *state* includes several non-secure CPU modes (usr, svc,
und, abt, irq, fiq, hyp). You can choose to switch to either of them
as you want, but if you want to boot Linux you should choose Hyp mode
so KVM will work, unless you are writing your own hypervisor or
5 matches
Mail list logo