Remove unused preprocessor definitions and comments of already eliminated
code.
The Ethernet driver configuration is already declared in
arch/arm/mach-kirkwood/include/mach/config.h and, therefore, superfluous.
Signed-off-by: Pascal Linder <pascal.lin...@edu.hefr.ch>
Signed-off-by: Holger Brunck <holger.bru...@ch.abb.com>
---
include/configs/km/keymile-common.h | 2 --
include/configs/km/km_arm.h | 22 ----------------------
scripts/config_whitelist.txt | 1 -
3 files changed, 25 deletions(-)
diff --git a/include/configs/km/keymile-common.h
b/include/configs/km/keymile-common.h
index 3106ef1d8c..8433d8e568 100644
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -7,8 +7,6 @@
#ifndef __CONFIG_KEYMILE_H
#define __CONFIG_KEYMILE_H
-#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
-
/*
* Miscellaneous configurable options
*/
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index d4a6a6357c..b257c384dc 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -30,8 +30,6 @@
/* include common defines/options for all Keymile boards */
#include "keymile-common.h"
-/* SPI NOR Flash default params, used by sf commands */
-
/* Reserve 4 MB for malloc */
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
@@ -69,18 +67,11 @@
#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
#define CONFIG_SYS_NS16550_COM2 KW_UART1_BASE
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CONFIG_BOOTMAPSZ (8 << 20) /* Initial Memmap for Linux */
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_INITRD_TAG /* enable INITRD tag */
#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
@@ -90,22 +81,16 @@
*/
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define BOOTFLASH_START 0x0
-
/*
* Other required minimal configurations
*/
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
/*
* Ethernet Driver configuration
*/
-#define CONFIG_NETCONSOLE /* include NetConsole support */
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0
-#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
/*
* I2C related stuff
@@ -219,13 +204,8 @@ int get_scl(void);
"arch=arm\0" \
""
-#if !defined(CONFIG_MTD_NOR_FLASH)
-#undef CONFIG_JFFS2_CMDLINE
-#endif
-
/* additions for new relocation code, must be added to all boards */
#define CONFIG_SYS_SDRAM_BASE 0x00000000
-/* Do early setups now in board_init_f() */
/* address for the bootcount (taken from end of RAM) */
#define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM)
@@ -235,6 +215,4 @@ int get_scl(void);
#define CONFIG_POST_SKIP_ENV_FLAGS
#define CONFIG_POST_EXTERNAL_WORD_FUNCS
-/* we do the whole PCIe FPGA config stuff here */
-
#endif /* _CONFIG_KM_ARM_H */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 5d54f12375..fab6bbae3a 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -129,7 +129,6 @@ CONFIG_BOARD_SIZE_LIMIT
CONFIG_BOOGER
CONFIG_BOOTBLOCK
CONFIG_BOOTFILE
-CONFIG_BOOTMAPSZ
CONFIG_BOOTMODE
CONFIG_BOOTM_LINUX
CONFIG_BOOTM_NETBSD
--
2.21.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
